Determining the mechanism of membrane permeabilizing peptides: Identification of potent, equilibrium pore-formers

To enable selection and characterization of highly potent pore-forming peptides, we developed a set of novel assays to probe 1) the potency of peptide pores at very low peptide concentration; 2) the presence or absence of pores in membranes after equilibration; 3) the interbilayer exchangeability of pore-forming peptides; and 4) the degree to which pore-forming peptides disrupt the bilayer organization at equilibrium. Here, we use these assays to characterize, in parallel, six membrane-permeabilizing peptides belonging to multiple classes. We tested the antimicrobial peptides LL37 and dermaseptin S1, the well-known natural lytic peptides melittin and alamethicin, and the very potent lentivirus lytic peptides LLP1 and LLP2 from the cytoplasmic domain of HIV GP41. The assays verified that that the antimicrobial peptides are not potent pore formers, and form only transient permeabilization pathways in bilayers which are not detectable at equilibrium. The other peptides are far more potent and form pores that are still detectable in vesicles after many hours. Among the peptides studies, alamethicin is unique in that it is very potent, readily exchanges between vesicles, and disturbs the local bilayer structure even at very low concentration. The equally potent LLP peptides do not exchange readily and do not perturb the bilayer at equilibrium. Comparison of these classes of pore forming peptides in parallel using the set of assays we developed demonstrates our ability to detect differences in their mechanism of action. Importantly, these assays will be very useful in high-throughput screening where highly potent pore-forming peptides can be selected based on their mechanism of action.     

pH-triggered pore-forming peptides with strong composition-dependent membrane selectivity

Peptides that self-assemble into nanometer-sized pores in lipid bilayers could have utility in a variety of biotechnological and clinical applications if we can understand their physical chemical properties and learn to control their membrane selectivity. To empower such control, we have used synthetic molecular evolution to identify the pH-dependent delivery peptides, a family of peptides that assemble into macromolecule-sized pores in membranes at low peptide concentration but only at pH < ～6. Further advancements will also require better selectivity for specific membranes. Here, we determine the effect of anionic headgroups and bilayer thickness on the mechanism of action of the pH-dependent delivery peptides by measuring binding, secondary structure, and macromolecular poration. The peptide pHD15 partitions and folds equally well into zwitterionic and anionic membranes but is less potent at pore formation in phosphatidylserine-containing membranes. The peptide also binds and folds similarly in membranes of various thicknesses, but its ability to release macromolecules changes dramatically. It causes potent macromolecular poration in vesicles made from phosphatidylcholine with 14 carbon acyl chains, but macromolecular poration decreases sharply with increasing bilayer thickness and does not occur at any peptide concentration in fluid bilayers made from phosphatidylcholine lipids with 20-carbon acyl chains. The effects of headgroup and bilayer thickness on macromolecular poration cannot be accounted for by the amount of peptide bound but instead reflect an inherent selectivity of the peptide for inserting into the membrane-spanning pore state. Molecular dynamics simulations suggest that the effect of thickness is due to hydrophobic match/mismatch between the membrane-spanning peptide and the bilayer hydrocarbon. This remarkable degree of selectivity based on headgroup and especially bilayer thickness is unusual and suggests ways that pore-forming peptides with exquisite selectivity for specific membranes can be designed or evolved.     

Action mechanism of tachyplesin I and effects of PEGylation

PEGylation of protein and peptide drugs is frequently used to improve in vivo efficacy. We investigated the action mechanism of tachyplesin I, a membrane-acting cyclic antimicrobial peptide from Tachypleus tridentatus and the effects of PEGylation on the mechanism. The PEGylated peptide induced the leakage of calcein from egg yolk l-α-phosphatidylglycerol/egg yolk l-α-phosphatidylcholine large unilamellar vesicles similarly to the parent peptide. Both peptides induced lipid flip-flop coupled to leakage and was translocated into the inner leaflet of the bilayer, indicating that tachyplesin I forms a toroidal pore and that PEGylation did not alter the basic mechanism of membrane permeabilization of the parent peptide. Despite their similar activities against model membranes, the peptides showed very different biological activities. The cytotoxicity of tachyplesin I was greatly reduced by PEGylation, although the antimicrobial activity was significantly weakened. We investigated the enhancement of the permeability of inner membranes induced by the peptides. Our results suggested that outer membranes and peptidoglycan layers play an inhibitory role in the permeation of the PEG moiety. Furthermore, a reduction in DNA binding by PEGylation may also contribute to the weak activity of the PEGylated peptide.     

Antibacterial and leishmanicidal activities of temporin-SHd,a 17-residue long membrane-damaging peptide

Temporins are a family of short antimicrobial peptides (8–17 residues) that mostly show potent activity against Gram-positive bacteria. Herein, we demonstrate that temporin-SHd, a 17-residue peptide with a net charge of +2 (FLPAALAGIGGILGKLF_amide), expressed a broad spectrum of antimicrobial activity. This peptide displayed potent antibacterial activities against Gram-negative and Gram-positive bacteria, including multi-drug resistant Staphylococcus aureus strains, as well as antiparasitic activity against promastigote and the intracellular stage (amastigote) of Leishmania infantum, at concentration not toxic for the macrophages. Temporin-SHd that is structured in a non-amphipathic α-helix in anionic membrane-mimetic environments, strongly and selectively perturbs anionic bilayer membranes by interacting with the polar head groups and acyl region of the phospholipids, with formation of regions of two coexisting phases: one phase rich in peptide and the other lipid-rich. The disruption of lipid packing within the bilayer may lead to the formation of transient pores and membrane permeation/disruption once a threshold peptide accumulation is reached. To our knowledge, Temporin-SHd represents the first known 17-residue long temporin expressing such broad spectrum of antimicrobial activity including members of the trypanosomatidae family. Additionally, since only a few shorter members (13 residues) of the temporin family are known to display antileishmanial activity (temporins-TA, -TB and -SHa), SHd is an interesting tool to analyze the antiparasitic mechanism of action of temporins.     

Action mechanism of tachyplesin I and effects of PEGylation

PEGylation of protein and peptide drugs is frequently used to improve in vivo efficacy. We investigated the action mechanism of tachyplesin I, a membrane-acting cyclic antimicrobial peptide from Tachypleus tridentatus and the effects of PEGylation on the mechanism. The PEGylated peptide induced the leakage of calcein from egg yolk L-alpha-phosphatidylglycerol/egg yolk L-alpha-phosphatidylcholine large unilamellar vesicles similarly to the parent peptide. Both peptides induced lipid flip-flop coupled to leakage and was translocated into the inner leaflet of the bilayer, indicating that tachyplesin I forms a toroidal pore and that PEGylation did not alter the basic mechanism of membrane permeabilization of the parent peptide. Despite their similar activities against model membranes, the peptides showed very different biological activities. The cytotoxicity of tachyplesin I was greatly reduced by PEGylation, although the antimicrobial activity was significantly weakened. We investigated the enhancement of the permeability of inner membranes induced by the peptides. Our results suggested that outer membranes and peptidoglycan layers play an inhibitory role in the permeation of the PEG moiety. Furthermore, a reduction in DNA binding by PEGylation may also contribute to the weak activity of the PEGylated peptide.     

A lipocentric view of peptide-induced pores

Although lipid membranes serve as effective sealing barriers for the passage of most polar solutes, nonmediated leakage is not completely improbable. A high activation energy normally keeps unassisted bilayer permeation at a very low frequency, but lipids are able to self-organize as pores even in peptide-free and protein-free membranes. The probability of leakage phenomena increases under conditions such as phase coexistence, external stress or perturbation associated to binding of nonlipidic molecules. Here, we argue that pore formation can be viewed as an intrinsic property of lipid bilayers, with strong similarities in the structure and mechanism between pores formed with participation of peptides, lipidic pores induced by different types of stress, and spontaneous transient bilayer defects driven by thermal fluctuations. Within such a lipocentric framework, amphipathic peptides are best described as pore-inducing rather than pore-forming elements. Active peptides bound to membranes can be understood as a source of internal surface tension which facilitates pore formation by diminishing the high activation energy barrier. This first or immediate action of the peptide has some resemblance to catalysis. However, the presence of membrane-active peptides has the additional effect of displacing the equilibrium towards the pore-open state, which is then maintained over long times, and reducing the size of initial individual pores. Thus, pore-inducing peptides, regardless of their sequence and oligomeric organization, can be assigned a double role of increasing the probability of pore formation in membranes to high levels as well as stabilizing these pores after they appear.     

Structural basis for the enhanced activity of cyclic antimicrobial peptides: the case of BPC194

We report the molecular basis for the differences in activity of cyclic and linear antimicrobial peptides. We iteratively performed atomistic molecular dynamics simulations and biophysical measurements to probe the interaction of a cyclic antimicrobial peptide and its inactive linear analogue with model membranes. We establish that, relative to the linear peptide, the cyclic one binds stronger to negatively charged membranes. We show that only the cyclic peptide folds at the membrane interface and adopts a β-sheet structure characterised by two turns. Subsequently, the cyclic peptide penetrates deeper into the bilayer while the linear peptide remains essentially at the surface. Finally, based on our comparative study, we propose a model characterising the mode of action of cyclic antimicrobial peptides. The results provide a chemical rationale for enhanced activity in certain cyclic antimicrobial peptides and can be used as a guideline for design of novel antimicrobial peptides.     

Antibacterial activity and dual mechanisms of peptide analog derived from cell-penetrating peptide against Salmonella typhimurium and Streptococcus pyogenes

A number of research have proven that antimicrobial peptides are of greatest potential as a new class of antibiotics. Antimicrobial peptides and cell-penetrating peptides share some similar structure characteristics. In our study, a new peptide analog, APP (GLARALTRLLRQLTRQLTRA) from the cell-penetrating peptide ppTG20 (GLFRALLRLLRSLWRLLLRA), was identified simultaneously with the antibacterial mechanism of APP against Salmonella typhimurium and Streptococcus pyogenes. APP displayed potent antibacterial activity against Gram-negative and Gram-positive strains. The minimum inhibitory concentration was in the range of 2 to 4 μM. APP displayed higher cell selectivity (about 42-fold increase) as compared to the parent peptide for it decreased hemolytic activity and increased antimicrobial activity. The calcein leakage from egg yolk l-α-phosphatidylcholine (EYPC)/egg yolk l-α-phosphatidyl-dl-glycerol and EYPC/cholesterol vesicles demonstrated that APP exhibited high selectivity. The antibacterial mechanism analysis indicated that APP induced membrane permeabilization in a kinetic manner for membrane lesions allowing O-nitrophenyl-β-d-galactoside uptake into cells and potassium release from APP-treated cells. Flow cytometry analysis demonstrated that APP induced bacterial live cell membrane damage. Circular dichroism, fluorescence spectra, and gel retardation analysis confirmed that APP interacted with DNA and intercalated into the DNA base pairs after penetrating the cell membrane. Cell cycle assay showed that APP affected DNA synthesis in the cell. Our results suggested that peptides derived from the cell-penetrating peptide have the potential for antimicrobial agent development, and APP exerts its antibacterial activity by damaging bacterial cell membranes and binding to bacterial DNA to inhibit cellular functions, ultimately leading to cell death.     

The relationship between the binding to and permeabilization of phospholipid bilayer membranes by GS14dK4, a designed analog of the antimicrobial peptide gramicidin S

The cationic beta-sheet cyclic tetradecapeptide cyclo[VKLdKVdYPLKVKLdYP] (GS14dK(4)) is a diastereomeric lysine ring-size analog of the potent naturally occurring antimicrobial peptide gramicidin S (GS) which exhibits enhanced antimicrobial but markedly reduced hemolytic activity compared to GS itself. We have previously studied the binding of GS14dK(4) to various phospholipid bilayer model membranes using isothermal titration calorimetry [Abraham, T. et al. (2005) Biochemistry 44, 2103-2112]. In the present study, we compare the ability of GS14dK(4) to bind to and disrupt these same phospholipid model membranes by employing a fluorescent dye leakage assay to determine the ability of this peptide to permeabilize large unilamellar vesicles. We find that in general, the ability of GS14dK(4) to bind to and to permeabilize phospholipid bilayers of different compositions are not well correlated. In particular, the binding affinity of GS14dK(4) varies markedly with the charge and to some extent with the polar headgroup structure of the phospholipid and with the cholesterol content of the model membrane. Specifically, this peptide binds much more tightly to anionic than to zwitterionic phospholipids and much less tightly to cholesterol-containing than to cholesterol-free model membranes. In addition, the maximum extent of binding of GS14dK(4) can also vary considerably with phospholipid composition in a parallel fashion. In contrast, the ability of this peptide to permeabilize phospholipid vesicles is only weakly dependent on phospholipid charge, polar headgroup structure or cholesterol content. We provide tentative explanations for the observed lack of a correlation between the affinity and extent of GS14dK(4) binding to, and degree of disruption of the structure and integrity of, phospholipid bilayers membranes. We also present evidence that the lack of correlation between these two parameters may be a general phenomenon among antimicrobial peptides. Finally, we demonstrate that the affinity of binding of GS14dK4 to various phospholipid bilayer membranes is much more strongly correlated with the antimicrobial and hemolytic activities of this peptide than with its effect on the rate and extent of dye leakage in these model membrane systems.     

Structure-function relationship of model Aib-containing peptides as ion transfer intermembrane templates

Peptaibols comprise a family of peptide antibiotics with high contents of 2-aminoisobutyric acid (Aib) residues and C-terminal amino alcohols. These peptides form alpha-helical structures leading to voltage-gated ion channels in lipid membranes. In the present study, amphiphilic helical Aib-containing peptides of various chain-lengths, Ac-(Aib-Lys-Aib-Ala)n-NH2 (n = 1-5), were designed to investigate the mechanisms of the aggregation and transmembrane orientation of helical motifs in lipid bilayer membranes. Peptide synthesis was performed by the conventional stepwise Fmoc solid-phase method. The crude peptides were obtained in high yields (66-85%) with high purities (69-95%). Conformational analysis of the synthetic peptides was performed by CD spectroscopy. It was found that these peptides take on highly helical structures, and the helicity of the peptides increases with an increase in chain-length. The longest peptide, Ac-(Aib-Lys-Aib-Ala)5-NH2, self-aggregates and adopts a barrel-stave conformation in liposomes. Ac-(Aib-Lys-Aib-Ala)5-NH2 exhibited potent antimicrobial activity against Gram-positive bacteria. Patch-clamp measurements revealed that this peptide can form well-defined ion channels with a long lifetime at relatively low transbilayer potentials and peptide concentrations. For this peptide, the single-channel conductance of the most frequent event is 227 pS, which could be related to a single-state tetrameric pore.     

Does cholesterol suppress the antimicrobial peptide induced disruption of lipid raft containing membranes?

The activity of antimicrobial peptides has been shown to depend on the composition of the target cell membrane. The bacterial selectivity of most antimicrobial peptides has been attributed to the presence of abundant acidic phospholipids and the absence of cholesterol in bacterial membranes. The high amount of cholesterol present in eukaryotic cell membranes is thought to prevent peptide-induced membrane disruption by increasing the cohesion and stiffness of the lipid bilayer membrane. While the role of cholesterol on an antimicrobial peptide-induced membrane disrupting activity has been reported for simple, homogeneous lipid bilayer systems, it is not well understood for complex, heterogeneous lipid bilayers exhibiting phase separation (or "lipid rafts"). In this study, we show that cholesterol does not inhibit the disruption of raft-containing 1,2-dioleoyl-sn-glycero-3-phosphocholine:1,2-dipalmitoyol-sn-glycero-3-phosphocholine model membranes by four different cationic antimicrobial peptides, MSI-78, MSI-594, MSI-367 and MSI-843 which permeabilize membranes. Conversely, the presence of cholesterol effectively inhibits the disruption of non-raft containing 1,2-dioleoyl-sn-glycero-3-phosphocholine or 1,2-dipalmitoyol-sn-glycero-3-phosphocholine lipid bilayers, even for antimicrobial peptides that do not show a clear preference between the ordered gel and disordered liquid-crystalline phases. Our results show that the peptide selectivity is not only dependent on the lipid phase but also on the presence of phase separation in heterogeneous lipid systems.     

Interaction of cationic antimicrobial peptides with model membranes

A series of natural and synthetic cationic antimicrobial peptides from various structural classes, including alpha-helical, beta-sheet, extended, and cyclic, were examined for their ability to interact with model membranes, assessing penetration of phospholipid monolayers and induction of lipid flip-flop, membrane leakiness, and peptide translocation across the bilayer of large unilamellar liposomes, at a range of peptide/lipid ratios. All peptides were able to penetrate into monolayers made with negatively charged phospholipids, but only two interacted weakly with neutral lipids. Peptide-mediated lipid flip-flop generally occurred at peptide concentrations that were 3- to 5-fold lower than those causing leakage of calcein across the membrane, regardless of peptide structure. With the exception of two alpha-helical peptides V681(n) and V25(p,) the extent of peptide-induced calcein release from large unilamellar liposomes was generally low at peptide/lipid molar ratios below 1:50. Peptide translocation across bilayers was found to be higher for the beta-sheet peptide polyphemusin, intermediate for alpha-helical peptides, and low for extended peptides. Overall, whereas all studied cationic antimicrobial peptides interacted with membranes, they were quite heterogeneous in their impact on these membranes.     

The lantibiotic nisin, a special case or not?

Nisin is a 34-residue-long peptide belonging to the group A lantibiotics with antimicrobial activity against Gram-positive bacteria. The presence of dehydrated residues and lanthionine rings (thioether bonds) in nisin, imposing structural restrains on the peptide, make it an interesting case for studying the mode of action. In addition, the relatively high activity (nM range) of nisin against Gram-positive bacteria indicates that nisin may be a special case in the large family of pore-forming peptides antibiotics. In this review, we attempted to dissect the mode of action of nisin concentrating on studies that used model membranes or biological membranes. The picture that emerges suggests that in model membrane systems, composed of only phospholipids, nisin behaves similar to the antimicrobial peptide magainin, albeit with an activity that is much lower as compared to its activity towards biological membranes. This difference can be contributed to a missing factor which nisin needs for its high activity. Novel results have identified the factor as Lipid II, a precursor in the bacterial cell wall synthesis. The special high affinity interaction of nisin with Lipid II resulting in high activity and the active role of Lipid II in the pore-formation process make nisin a special case.     

Targeting specific membranes with an azide derivative of the pore-forming peptide ceratotoxin A

Pore-forming antimicrobial peptides (AMPs) are attracting interest as cytolytic antibiotics and drug delivery agents with potential use for targeting cancer cells or multidrug-resistant pathogens. Ceratotoxin A (CtxA) is an insect-derived cytolytic AMP with 36 amino acids that is thought to protect the eggs of the medfly Ceratitis capitata against pathogens. Single channel recordings using planar lipid bilayers have shown that CtxA forms pores with well-defined conductance states resembling those of alamethicin; it also forms one of the largest pores among the group of ceratotoxins. In this work, we modified CtxA at its N-terminus with an azide group and investigated its pore-forming characteristics in planar lipid bilayer experiments. We demonstrate the possibility to target specific lipids by carrying out click reactions in-situ on lipid membranes that display a dibenzocyclooctyne (DBCO) moiety on their head group. As a result of covalent linkage of the peptides to the bilayer, pore-formation occurs at 10-fold reduced peptide concentration and with a reduced dependence on the transmembrane voltage compared to unlinked CtxA-azide peptides or native CtxA peptides.     

Partition of antimicrobial D-L-α-cyclic peptides into bacterial model membranes

Fluorescence spectroscopy is used to characterize the partition of three second-generation D,L-α-cyclic peptides to two lipid model membranes. The peptides have proven antimicrobial activity, particularly against Gram positive bacteria, and the model membranes are formed of either with 1,2-dimyristoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (DMPG) or its mixture with 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE), at a molar ratio of (1:1). The peptide's intrinsic fluorescence was used in the Steady State and/or Time Resolved Fluorescence Spectroscopy experiments, showing that the peptides bind to the membranes, and the extent of their partition is thereof quantified. The peptide-induced membrane leakage was followed using an encapsulated fluorescent dye.Overall, the partition is mainly driven by electrostatics, but also involves hydrophobic interactions. The introduction of a hydrocarbon tail in one of the residues of the parent peptide, CPR, adjacent to the tryptophan (Trp) residue, significantly improves the partition of the modified peptides, CPRT10 and CPRT14, to both membrane systems. Further, we show that the length of the tail is the main distinguishing factor for the extension of the partition process.The parent peptide induces very limited leakage, at odds with the peptides with tail, that promote fast leakage, increasing in most cases with peptide concentration, and being almost complete for the highest peptide concentration and negatively charged membranes.Overall, the results help the unravelling of the antimicrobial action of these peptides and are well in line with their proven high antimicrobial activity.     

Enhanced membrane pore formation through high-affinity targeted antimicrobial peptides

Many cationic antimicrobial peptides (AMPs) target the unique lipid composition of the prokaryotic cell membrane. However, the micromolar activities common for these peptides are considered weak in comparison to nisin, which follows a targeted, pore-forming mode of action. Here we show that AMPs can be modified with a high-affinity targeting module, which enables membrane permeabilization at low concentration. Magainin 2 and a truncated peptide analog were conjugated to vancomycin using click chemistry, and could be directed towards specific membrane embedded receptors both in model membrane systems and whole cells. Compared with untargeted vesicles, a gain in permeabilization efficacy of two orders of magnitude was reached with large unilamellar vesicles that included lipid II, the target of vancomycin. The truncated vancomycin-peptide conjugate showed an increased activity against vancomycin resistant Enterococci, whereas the full-length conjugate was more active against a targeted eukaryotic cell model: lipid II containing erythrocytes. This study highlights that AMPs can be made more selective and more potent against biological membranes that contain structures that can be targeted.     

Interaction with phospholipid bilayers, ion channel formation, and antimicrobial activity of basic amphipathic alpha-helical model peptides of various chain lengths.

Basic amphipathic alpha-helical peptides Ac-(Leu-Ala-Arg-Leu)3 or 4-NHCH3 (4(3) or 4(4)) and H-(Leu-Ala-Arg-Leu)3-(Leu-Arg-Ala-Leu)2 or 3-OH (4(5) or 4(6)) were synthesized and studied in terms of their interactions with phospholipid membranes, biological activity, and ion channel-forming ability. CD study of the peptides showed that they form alpha-helical structures in the presence of phospholipid liposomes and thus they have amphipathic distribution of the side chains along the axis of the helix. A leakage study of carboxyfluorescein encapsulated in phospholipid vesicles indicated that the peptides possess a highly potent ability to perturb the membrane structure. Membrane current measurements using the planar lipid bilayer technique revealed that the peptide 4(6), which was long enough to span the lipid bilayer in the alpha-helical structure, formed cation-selective ion channels at a concentration of 0.5 microM in a planar diphytanoylphosphatidylcholine bilayer. In contrast, other shorter peptides failed to form discrete and stable channels though they occasionally induced an increase in the membrane current with erratic conductance levels. The probability of detecting a conductance increase was in the order of 4(6) greater than 4(5) greater than 4(4) greater than 4(3), which corresponds to the order of the peptide chain lengths. Furthermore, 4(6) but not 4(5) showed an antimicrobial activity against both Gram-positive and -negative bacteria. The structure of ion channels formed by 4(6) and the relationship between the peptide chain length and biological activity of the synthetic peptides are discussed.     

Mode of action of cationic antimicrobial peptides defines the tethering position and the efficacy of biocidal surfaces

Covalent immobilization of cationic antimicrobial peptides (CAPs) at sufficient density and distance from the solid matrix has been suggested as a successful strategy for the generation of biocidal surfaces. To test the hypothesis that the mode of peptide action is decisive for the selection of an appropriate tethering position on solid surfaces, melittin (MEL), a channel-forming peptide, buforin 2 (BUF2), a peptide able to translocate bacterial membranes without permeabilization and targeting nucleic acids, and tritrpticin (TP), described to be membrane-lytic and to have intracellular targets, were C- and N-terminally immobilized on TentaGel S NH(2) resin beads as model surface. The peptide termini were modified with aminooxyacetic acid (AOA) and coupled via oxime-forming ligation. The comparison of the activities of the three peptides and their AOA-modified analogues with a KLAL model peptide which permeabilizes membranes by a so-called "carpet-like" mode provided the following results: The peptides in solution state were active against Bacillus subtilis and Escherichia coli at micromolar concentrations. MEL and TP but not BUF2-derived peptides permeabilized the inner and outer membrane of E. coli and enhanced the permeability of lipid bilayers at concentrations around their antimicrobial values (MICs). Immobilization reduced peptide activity to millimolar MICs. The activity reduction for KLAL was independent of the tethering position and comparably low, as reflected by a low ratio of MIC(tethered)/MIC(free). In contrary, the pore-forming MEL was much less active when immobilized at the N-terminus compared with the C-terminally tethered peptide. C- and N-terminal TP tethering caused an identical but much pronounced activity decrease. The tethered BUF2 peptides were inactive at the tested concentrations suggesting that the peptides could not reach the intracellular targets. In conclusion, membrane active peptides seem to be most suitable for the generation of antimicrobial surfaces, but knowledge about their mode of membrane insertion and positioning is required to identify optimal tethering positions. The relationship between the mechanism of action and position of immobilization is highly relevant for the establishment of a general approach to obtain efficient biocidal solid matrices loaded with CAPs.     

Role of the hinge region and the tryptophan residue in the synthetic antimicrobial peptides, cecropin A(1-8)-magainin 2(1-12) and its analogues, on their antibiotic activities and structures

A 20-residue hybrid peptide CA(1-8)-MA(1-12) (CA-MA), incorporating residues 1-8 of cecropin A (CA) and residues 1-12 of magainin 2 (MA), has potent antimicrobial activity without toxicity against human erythrocytes. To investigate the effects of the Gly-Ile-Gly hinge sequence of CA-MA on the antibacterial and antitumor activities, two analogues in which the Gly-Ile-Gly sequence of CA-MA is either deleted (P1) or substituted with Pro (P2) were synthesized. The role of the tryptophan residue at position 2 of CA-MA on its antibiotic activity was also investigated using two analogues, in which the Trp2 residue of CA-MA is replaced with either Ala (P3) or Leu (P4). The tertiary structures of CA-MA, P2, and P4 in DPC micelles, as determined by NMR spectroscopy, have a short amphiphilic helix in the N-terminus and about three turns of alpha-helix in the C-terminus, with the flexible hinge region between them. The P1 analogue has an alpha-helix from Leu4 to Ala14 without any hinge structure. P1 has significantly decreased lytic activities against bacterial and tumor cells and PC/PS vesicles (3:1, w/w), and reduced pore-forming activity on lipid bilayers, while P2 retained effective lytic activities and pore-forming activity. The N-terminal region of P3 has a flexible structure without any specific secondary structure. The P3 modification caused a drastic decrease in the antibiotic activities, whereas P4, with the hydrophobic Leu side chain at position 2, retained its activities. On the basis of the tertiary structures, antibiotic activities, vesicle-disrupting activities, and pore-forming activities, the structure-function relationships can be summarized as follows. The partial insertion of the Trp2 of CA-MA into the membrane, as well as the electrostatic interactions between the positively charged Lys residues at the N-terminus of the CA-MA and the anionic phospholipid headgroups, leads to the primary binding to the cell membrane. Then, the flexibility or bending potential induced by the Gly-Ile-Gly hinge sequence or the Pro residue in the central part of the peptides may allow the alpha-helix in the C-terminus to span the lipid bilayer. These structural features are crucial for the potent antibiotic activities of CA-MA.