Increased Abundance of IncP-1β Plasmids and Mercury Resistance Genes in Mercury-Polluted River Sediments: First Discovery of IncP-1β Plasmids with a Complex mer Transposon as the Sole Accessory Element

Although it is generally assumed that mobile genetic elements facilitate the adaptation of microbial communities to environmental stresses, environmental data supporting this assumption are rare. In this study, river sediment samples taken from two mercury-polluted (A and B) and two nonpolluted or less-polluted (C and D) areas of the river Nura (Kazakhstan) were analyzed by PCR for the presence and abundance of mercury resistance genes and of broad-host-range plasmids. PCR-based detection revealed that mercury pollution corresponded to an increased abundance of mercury resistance genes and of IncP-1β replicon-specific sequences detected in total community DNA. The isolation of IncP-1β plasmids from contaminated sediments was attempted in order to determine whether they carry mercury resistance genes and thus contribute to an adaptation of bacterial populations to Hg pollution. We failed to detect IncP-1β plasmids in the genomic DNA of the cultured Hg-resistant bacterial isolates. However, without selection for mercury resistance, three different IncP-1β plasmids (pTP6, pTP7, and pTP8) were captured directly from contaminated sediment slurry in Cupriavidus necator JMP228 based on their ability to mobilize the IncQ plasmid pIE723. These plasmids hybridized with the merRTΔP probe and conferred Hg resistance to their host. A broad host range and high stability under conditions of nonselective growth were observed for pTP6 and pTP7. The full sequence of plasmid pTP6 was determined and revealed a backbone almost identical to that of the IncP-1β plasmids R751 and pB8. However, this is the first example of an IncP-1β plasmid which had acquired only a mercury resistance transposon but no antibiotic resistance or biodegradation genes. This transposon carries a rather complex set of mer genes and is inserted between Tra1 and Tra2.     

Structure of haloacetate-catabolic IncP-1beta plasmid pUO1 and genetic mobility of its residing haloacetate-catabolic transposon

The self-transmissible plasmid pUO1 from Delftia acidovorans strain B carries two haloacetate-catabolic transposons, TnHad1 and TnHad2, and the mer genes for resistance to mercury. The complete 67,066-bp sequence of pUO1 revealed that the mer genes were also carried by two Tn402/Tn5053-like transposons, Tn4671 and Tn4672, and that the pUO1 backbone regions shared 99% identity to those of the archetype IncP-1beta plasmid R751. Comparison of pUO1 with three other IncP-1beta plasmids illustrated the importance of transposon insertion in the diversity and evolution of this group of plasmids. Mutational analysis of the four outermost residues in the inverted repeats (IRs) of TnHad2, a Tn21-related transposon, revealed a crucial role of the second residue of its IRs in transposition.     

The multiple antibiotic resistance IncP-1 plasmid pKJK5 isolated from a soil environment is phylogenetically divergent from members of the previously established alpha, beta and delta sub-groups

The 54,383bp plasmid pKJK5 was recovered from a soil environment by exogenous plasmid isolation and conveys resistance towards tetracycline and trimethoprim. Sequencing and annotation revealed a high level of structural similarity of the backbone genes to other IncP-1 plasmids containing a Tra1 and Tra2 region, a central control module and a replication initiation module. A considerable degree of divergence was associated with the backbone genes of pKJK5 as compared to homologous genes in the alpha, beta and delta subgroups, which indicates that pKJK5 may belong to a novel subgroup of IncP-1 plasmids, which may also accommodate the partially sequenced non-subgroup classified plasmid pEMT3. Individual backbone genes in pKJK5 have a GC-content, which is consistently lower (average 6.3%) than the homologous genes from the archetype IncP-1beta plasmid R751 indicating homogenous amelioration of IncP-1 plasmid backbone genes. Two discrete accessory elements of 2145bp (load 1) and 11678bp (load 2) respectively are situated between the Tra1 and Tra2 regions of pKJK5, both bounded by inverted repeats and direct flanking repeats indicative of transposon-mediated insertion. Load 1 consists of an insertion sequence ISPa17 and load 2 is a Tn402-derivative containing a class 1 integron, IS1326 and a fragment identical to a region of plasmid pTB11 harboring a tetracycline resistance determinant and part of an IncP-1alphaoriV region.     

Broad-host-range plasmids from agricultural soils have IncP-1 backbones with diverse accessory genes

Broad-host-range plasmids are known to spread genes between distinct phylogenetic groups of bacteria. These genes often code for resistances to antibiotics and heavy metals or degradation of pollutants. Although some broad-host-range plasmids have been extensively studied, their evolutionary history and genetic diversity remain largely unknown. The goal of this study was to analyze and compare the genomes of 12 broad-host-range plasmids that were previously isolated from Norwegian soils by exogenous plasmid isolation and that encode mercury resistance. Complete nucleotide sequencing followed by phylogenetic analyses based on the relaxase gene traI showed that all the plasmids belong to one of two subgroups (β and ε) of the well-studied incompatibility group IncP-1. A diverse array of accessory genes was found to be involved in resistance to antimicrobials (streptomycin, spectinomycin, and sulfonamides), degradation of herbicides (2,4-dichlorophenoxyacetic acid and 2,4-dichlorophenoxypropionic acid), and a putative new catabolic pathway. Intramolecular transposition of insertion sequences followed by deletion was found to contribute to the diversity of some of these plasmids. The previous observation that the insertion sites of a Tn501-related element are identical in four IncP-1β plasmids (pJP4, pB10, R906, and R772) was further extended to three more IncP-1β plasmids (pAKD15, pAKD18, and pAKD29). We proposed a hypothesis for the evolution of these Tn501-bearing IncP-1β plasmids that predicts recent diversification followed by worldwide spread. Our study increases the available collection of complete IncP-1 plasmid genome sequences by 50% and will aid future studies to enhance our understanding of the evolution and function of this important plasmid family.     

Spread and survival of promiscuous IncP-1 plasmids

Plasmids classified to the IncP-1 incompatibility group belong to the most stably maintained mobile elements among low copy number plasmids known to date. The remarkable persistence is achieved by various tightly controlled stability mechanisms like active partitioning, efficient conjugative transfer system, killing of plasmid-free segregants and multimer resolution. The unique feature of IncP-1 plasmids is the central control operon coding for global regulators which control the expression of genes involved in vegetative replication, stable maintenance and conjugative transfer. The multivalent regulatory network provides means for coordinated expression of all plasmid functions. The current state of knowledge about two fully sequenced plasmids RK2 and R751, representatives of the IncP-1alpha and IncP-1beta subgroups, is presented.     

Molecular classification of IncP-9 naphthalene degradation plasmids

A large collection of naphthalene-degrading fluorescent Pseudomonas strains isolated from sites contaminated with coal tar and crude oil was screened for the presence of IncP-9 plasmids. Seventeen strains were found to carry naphthalene catabolic plasmids ranging in size from 83 to 120 kb and were selected for further study. Results of molecular genotyping revealed that 15 strains were closely related to P. putida, one to P. fluorescens, and one to P. aeruginosa. All catabolic plasmids found in these strains, with the exception of pBS216, pSN11, and p8909N-1, turned out to belong to IncP-9 beta-subgroup. Plasmids pBS216, pSN11, and p8909N-1 were identified as members of IncP-9 delta-subgroup. One plasmid, pBS2, contains fused replicons of IncP-9beta and IncP-7 groups. RFLP analyses of the naphthalene catabolic plasmids revealed that organisation of the replicon correlates well with the overall plasmid structure. Comparative PCR studies with conserved oligonucleotide primers indicated that genes for key enzymes of naphthalene catabolism are highly conserved among all studied plasmids. Three bacterial strains, P. putida BS202, P. putida BS3701, and P. putida BS3790, were found to have two different salicylate hydroxylase genes one of which has no similarity to the "classic" enzyme encoded by nahG gene. Discovery of a large group of plasmid with unique nahR suggested that the regulatory loop may also represent a variable part of the pathway for catabolism of naphthalene in fluorescent Pseudomonas spp.     

Host-specific factors determine the persistence of IncP-1 plasmids

Conjugative plasmids play a very important role in bacterial adaptation through the dissemination of useful traits. Incompatibility group P-1 (IncP-1) plasmids exhibit an extreme broad-host-range among Gram-negative bacteria and known to be one of the major agents to disseminate various phenotypic traits such as antibiotic resistance and xenobiotic degradation. Although the plasmids are believed to be very stable in most Gram-negative bacteria, little is known about the factors that affect their stability in various hosts, allowing their persistence in bacterial population. Here we show that the stability of the cryptic IncP-1β plasmid pBP136 differed greatly in four different Escherichia coli K12 host backgrounds (MG1655, DH5α, EC100, and JM109), whereas the closely related plasmid pB10 was stable in all four strains. The supply of the kleF gene, which is involved in the stability of IncP-1 plasmids but absent in pBP136, did not improve the stability of the plasmid. Our findings suggest that persistence of IncP-1 plasmids in the absence of selection is affected by strain-specific factors.     

Plasmid pB8 is closely related to the prototype IncP-1beta plasmid R751 but transfers poorly to Escherichia coli and carries a new transposon encoding a small multidrug resistance efflux protein

The IncP-1beta plasmid pB8, which confers resistance to amoxicillin, spectinomycin, streptomycin, and sulfonamides, was previously isolated from a sewage treatment plant. It was found to possess abnormal conjugative transfer properties, i.e., transfer to Escherichia coli by conjugation or electroporation could not be detected. We showed in this study that plasmid pB8 is transferable to E. coli by conjugation, but only at low frequencies and under specific experimental conditions, a phenomenon that is very unusual for IncP-1 plasmids. Determination of the complete 57,198bp pB8 nucleotide sequence revealed that the backbone of the plasmid consists of a complete set of IncP-1beta-specific genes for replication initiation, conjugative plasmid transfer, stable inheritance, and plasmid control with an organisation identical to that of the prototype IncP-1beta plasmid R751. All of the minor differences in the pB8 backbone sequence compared to that of R751 were also found in other IncP-1beta plasmids known to transfer to and replicate in E. coli. Plasmids pB8 and R751 can be distinguished with respect to their accessory genetic elements. First, the pB8 region downstream of the replication initiation gene trfA contains two transposable elements one of which is similar to Tn5501. The latter transposon encodes a putative post-segregational-killing system and the small multidrug resistance (SMR) protein QacF, mediating quaternary ammonium compound resistance. The accessory genes in this region are not responsible for the poor plasmid transfer to E. coli since a pB8 deletion derivative devoid of all genes in that region showed the same conjugative transfer properties as pB8. A Tn5090/Tn402 derivative carrying a class 1 integron is located between the conjugative transfer modules. The Tn5090/Tn402 integration-sites are exactly identical on pB8 and R751 but in contrast to R751 the pB8 element carries the resistance gene cassettes oxa-2 for amoxicillin resistance and aadA4 for streptomycin/spectinomycin resistance, the integron-specific conserved segment consisting of the genes qacEDelta1, sul1, and orf5, and a truncated tni transposition module (tniAB). Although future work will have to determine the molecular basis for the poor transfer of pB8 to E. coli, our findings demonstrate that the host-range of typical IncP-1 plasmids may be less broad than expected.     

Sequence of plasmid pBS228 and reconstruction of the IncP-1alpha phylogeny

The antibiotic resistance plasmid pBS228 has been completely sequenced, and revealed to be descended from a plasmid virtually identical to the Birmingham IncP-1alpha plasmid RK2/RP4/RP1. However, it has three additional transposon insertions, one of which is responsible for the extra antibiotic resistances conferred. Loss of kanamycin resistance, which is characteristic of most IncP-1alpha plasmids, is the result of this insertion. A second transposon causes inactivation of the mating pair formation apparatus, rendering the plasmid non-self-transmissible. Comparison with the published data for other IncP-1alpha plasmids gives insight into the recent evolutionary history of this group as well as the acquisition and transmission of one of the first ampicillin resistance transposons discovered.     

Utilization of IncP-1 plasmids as vectors for transposon mutagenesis in myxobacteria

No free plasmid has ever been found in the myxobacterium Myxococcus xanthus, but IncP-1 plasmids are able to integrate into the chromosome of this bacterium. The frequency of integration depends greatly upon the structure of the IncP-1 plasmid used. This property has been used to devise new delivery systems for transposon mutagenesis in this species. Plasmids with low integration efficiencies have proved to be efficient donors of Tn5, while plasmids with very high frequencies of integration could be used directly to generate mutations. These vectors have also proved efficient for Tn5 transfer into other species of myxobacteria, which have not so far been susceptible to genetic analysis.     

Genetic organization of the catabolic plasmid pJP4 from Ralstonia eutropha JMP134 (pJP4) reveals mechanisms of adaptation to chloroaromatic pollutants and evolution of specialized chloroaromatic degradation pathways

Ralstonia eutropha JMP134 (pJP4) is a useful model for the study of bacterial degradation of substituted aromatic pollutants. Several key degrading capabilities, encoded by tfd genes, are located in the 88 kb, self-transmissible, IncP-1 beta plasmid pJP4. The complete sequence of the 87,688 nucleotides of pJP4, encoding 83 open reading frames (ORFs), is reported. Most of the coding sequence corresponds to a well-conserved IncP-1 beta backbone and the previously reported tfd genes. In addition, we found hypothetical proteins putatively involved in the transport of aromatic compounds and short-chain fatty acid oxidation. ORFs related to mobile elements, including the Tn501-encoded mercury resistance determinants, an IS1071-based composite transposon and a cryptic class II transposon, are also present in pJP4. These mobile elements are inefficient in transposition and are located in two regions of pJP4 that are rich in remnants of lateral gene transfer events. pJP4 plasmid was able to capture chromosomal genes and form hybrid plasmids with the IncP-1 alpha plasmid RP4. These observations are integrated into a model for the evolution of pJP4, which reveals mechanisms of bacterial adaptation to degrade pollutants.     

Acclimation of subsurface microbial communities to mercury

We studied the acclimation to mercury of bacterial communities of different depths from contaminated and noncontaminated floodplain soils. The level of mercury tolerance of the bacterial communities from the contaminated site was higher than those of the reference site. Furthermore, the level of mercury tolerance and functional versatility of bacterial communities in contaminated soils initially were higher for surface soil, compared with the deeper soils. However, following new mercury exposure, no differences between bacterial communities were observed, which indicates a high adaptive potential of the subsurface communities, possibly due to differences in the availability of mercury. IncP-1 trfA genes were detected in extracted community DNA from all soil depths of the contaminated site, and this finding was correlated to the isolation of four different mercury-resistance plasmids, all belonging to the IncP-1beta group. The abundance of merA and IncP-1 plasmid carrying populations increased, after new mercury exposure, which could be the result of selection as well as horizontal gene exchange. The data in this study suggest a role for IncP-1 plasmids in the acclimation to mercury of surface as well as subsurface soil microbial communities.     

New molecular variants of epsilon and beta IncP-1 plasmids are present in estuarine waters

In this work the presence of broad-host-plasmids in an estuary in Portugal has been investigated. Pseudomonas putida KT2442 was used as model recipient bacteria in biparental matings with tetracycline and mercury to select for resistance phenotypes. As a result, 7 transconjugants were shown to carry broad-host-plasmids from the IncP-1 group, as seen by PCR amplification of the trfA gene. Sequence analysis confirmed the isolation of 4 plasmids from β-1 subgroup and 3 assigned to the recently described ε subgroup. To our knowledge this is the first report concerning the detection and isolation of IncP-1β and ε plasmids in estuarine waters. Moreover it is shown that, even though the retrieved plasmids are phylogenetically close to previously characterized plasmids, such as pB10 and pKJK5, respectively, they constitute new molecular variants.     

Region-specific insertion of transposons in combination with selection for high plasmid transferability and stability accounts for the structural similarity of IncP-1 plasmids

The overall architecture of IncP-1 plasmids is very conserved in that the accessory genes are typically located in one or two specific regions: between oriV and trfA and between the tra and trb operons. Various hypotheses have been formulated to explain this, but none have been tested experimentally. We investigated whether this structural similarity is due to region-specific transposition alone or also is reliant on selection for plasmids with insertions limited to these two regions. We first examined the transposition of Tn21Km into IncP-1beta plasmid pBP136 and found that most Tn21Km insertions (67%) were located around oriV. A similar experiment using the oriV region of IncP-1beta plasmid pUO1 confirmed these results. We then tested the transferability, stability, and fitness cost of different pBP136 derivatives to determine if impairment of these key plasmid characters explained the conserved plasmid architecture. Most of the pBP136 derivatives with insertions in transfer genes were no longer transferable. The plasmids with insertions in the oriV-trfA and tra-trb regions were more stable than other plasmid variants, and one of these also showed a significantly lower fitness cost. In addition, our detailed sequence analysis of IncP-1 plasmids showed that Tn402/5053-like transposons are situated predominantly between the tra and trb operons and close to the putative resolution site for the ParA resolvase, a potential hot spot for those transposons. Our study presents the first empirical evidence that region-specific insertion of transposons in combination with selection for transferable and stable plasmids explains the structural similarity of IncP-1 plasmids.     

IncP-1-beta plasmid pGNB1 isolated from a bacterial community from a wastewater treatment plant mediates decolorization of triphenylmethane dyes

Plasmid pGNB1 was isolated from bacteria residing in the activated sludge compartment of a wastewater treatment plant by using a transformation-based approach. This 60-kb plasmid confers resistance to the triphenylmethane dye crystal violet and enables its host bacterium to decolorize crystal violet. Partial sequencing of pGNB1 revealed that its backbone is very similar to that of previously sequenced IncP-1beta plasmids. The two accessory regions of the plasmid, one located downstream of the replication initiation gene trfA and the other located between the conjugative transfer modules Tra and Trb, were completely sequenced. Accessory region L1 contains a transposon related to Tn5501 and a gene encoding a Cupin 2 conserved barrel protein with an unknown function. The triphenylmethane reductase gene tmr and a truncated dihydrolipoamide dehydrogenase gene that is flanked by IS1071 and another putative insertion element were identified in accessory region L2. Subcloning of the pGNB1 tmr gene demonstrated that this gene is responsible for the observed crystal violet resistance phenotype and mediates decolorization of the triphenylmethane dyes crystal violet, malachite green, and basic fuchsin. Plasmid pGNB1 and the associated phenotype are transferable to the alpha-proteobacterium Sinorhizobium meliloti and the gamma-proteobacterium Escherichia coli. This is the first report of a promiscuous IncP-1beta plasmid isolated from the bacterial community from a wastewater treatment plant that harbors a triphenylmethane reductase gene. The pGNB1-encoded enzyme activity is discussed with respect to bioremediation of sewage polluted with triphenylmethane dyes.     

Evidence for past integration of IncP-1 plasmids into bacterial chromosomes

Plasmids of the IncP-1 incompatibility group are self-transmissible between and stably maintained in a very broad range of Gram-negative bacteria. A characteristic feature of IncP-1 genomes is the existence of multiple binding sites (OB) for the KorB protein which plays a dual role in active partitioning of plasmid and coordinate regulation of expression of genes for replication, maintenance and transfer. A search of the available bacterial genome sequences revealed a significant number (70 out of 322) with one or more putative KorB binding sites. Binding of KorB to such a site was demonstrated by chromatin immunoprecipitation (ChIP) for Pseudomonas putida KT2440. While such a site may arise by chance, this is unlikely for Pseudomonas aeruginosa UCBPP-PA14 whose genome sequence contains four clustered OB sites and several regions have more than 80% nucleotide identity to traJ, trbJ and trbL of IncP-1 plasmids. A number of other bacterial genomes also contain integrated partial IncP-1 genomes or their remnants. These data provide evidence for multiple past integration events of IncP-1 plasmids into bacterial chromosomes and provide new evidence for IncP-1 plasmids being important elements in gene mobility.     

Sequence and analysis of the 46.6-kb plasmid pA1 from Sphingomonas sp. A1 that corresponds to the typical IncP-1beta plasmid backbone without any accessory gene

Sphingomonas sp. A1 (strain A1) is capable of directly incorporating macromolecules (e.g., alginate) through the specialized import system--"super-channel." Here, we report the complete DNA sequence and genetic organization of plasmid pA1 from strain A1. Nucleotide sequence analysis revealed that pA1 comprises 46,557 bp encoding 49 open reading frames (ORFs) with 65% G+C content and abundant GCCG/CGGC motifs. Many predicted pA1 ORFs showed high similarity to pA81 ORFs; pA81 is supposedly a self-transmissible promiscuous incompatibility (Inc) group P-1beta plasmid. Unlike any reported IncP-1 plasmids, pA1 contains no inserted mobile genetic elements. The genetic organization and predicted pA1 ORFs showed greater similarity to the IncP-1beta plasmid backbone than to the IncP-1alpha plasmid backbone. pA1 contains restriction site-associated repeat sequences typical of the IncP-1beta but absent in the IncP-1alpha and delta subgroups. Thus, the overall pA1 structure corresponds to that of the typical IncP-1beta plasmids. Phylogenetic analysis of the replication-associated proteins suggested that pA1 may have diverged later along with the two IncP-1beta plasmids--pA81 and pB4. The 2.4-kb duplicates of stable inheritance genes klcAB and korC in pA1 possibly resulted from insertion and/or recombination events via the repeat sequences flanking these duplicates.     

Reconsideration of the previously classified incompatibility groups of plasmids,IncP-1 and IncP-11

This study presents the reassessment of earlier published data with reference to the article published in Environmental Microbiology entitled ‘IncP-type plasmids carrying genes for antibiotic resistance or aromatic compound degradation are prevalent in sequenced Aromatoleum and Thauera strains’ by Lo et al. This correspondence clarifies misperceptions of plasmids classified under incompatibility (Inc) groups IncP-1 and IncP-11.     

Complete sequence of the IncP-9 TOL plasmid pWW0 from Pseudomonas putida

The TOL plasmid pWW0 (117 kb) is the best studied catabolic plasmid and the archetype of the IncP-9 plasmid incompatibility group from Pseudomonas. It carries the degradative (xyl) genes for toluenes and xylenes within catabolic transposons Tn4651 and Tn4653. Analysis of the complete pWW0 nucleotide sequence revealed 148 putative open reading frames. Of these, 77 showed similarity to published sequences in the available databases predicting functions for: plasmid replication, stable maintenance and transfer; phenotypic determinants; gene regulation and expression; and transposition. All identifiable transposition functions lay within the boundaries of the 70 kb transposon Tn4653, leaving a 46 kb sector containing all the IncP-9 core functions. The replicon and stable inheritance region was very similar to the mini-replicon from IncP-9 antibiotic resistance plasmid pM3, with their Rep proteins forming a novel group of initiation proteins. pWW0 transfer functions exist as two blocks encoding putative DNA processing and mating pair formation genes, with organizational and sequence similarity to IncW plasmids. In addition to the known Tn4651 and IS1246 elements, two additional transposable elements were identified as well as several putative transposition functions, which are probably genetic remnants from previous transposition events. Genes likely to be responsible for known resistance to ultraviolet light and free radicals were identified. Other putative phenotypic functions identified included resistance to mercury and other metal ions, as well as to quaternary ammonium compounds. The complexity and size of pWW0 is largely the result of the mosaic organization of the transposable elements that it carries, rather than the backbone functions of IncP-9 plasmids.     

Sequence of the 68,869 bp IncP-1alpha plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements

To analyse the significance of conjugative broad-host-range IncP-1alpha plasmids for the spread of antibiotic resistance determinants in waste-water treatment plants we isolated and characterised five different IncP-1alpha plasmids from bacteria of activated sludge and the final effluents of a municipal waste-water treatment plant. These plasmids mediate resistance to ampicillin, cefaclor, cefuroxime, gentamicin, kanamycin, spectinomycin, streptomycin, tetracycline, tobramycin, and trimethoprim. The complete 68,869 bp DNA-sequence of the IncP-1alpha plasmid pTB11 was determined. The pTB11 backbone modules for replication (Rep), mating pair formation (Trb), multimer resolution (Mrs), post-segregational killing (Psk), conjugative DNA-transfer (Tra), plasmid control (Ctl), and stable maintenance and inheritance (KilA, KilE, and KilC) are highly conserved as compared to the 'Birmingham' IncP-1alpha plasmids. In contrast to the 'Birmingham' plasmids pTB11 carries an insert of a Tn402-derivative integrating a class 1 integron in the intergenic region between the multimer resolution operon parCBA and the post-segregational killing operon parDE. The integron comprises the resistance gene cassettes oxa2 (beta-lactamase), aacA4 (aminoglycoside-6'N-acetyltransferase), and aadA1 (aminoglycoside-3'-adenylyltransferase) and a complete tniABQR transposition module. Integron-specific sequences were also identified on other IncP-1alpha plasmids analysed in this work. In contrast to the 'Birmingham' plasmids the pTB11 tetracycline resistance module carries a pecM- and a pncA-like gene downstream of the tetracycline resistance gene tetA and contains an insertion of the new insertion sequence element ISTB11. The transposable elements IS21 and Tn1 which disrupted, respectively, orf7 and klcB on the 'Birmingham' plasmids are not present on pTB11. Identification of IncP-1alpha plasmids in bacteria of the waste-water treatment plant's final effluents indicates that bacteria carrying these kind of plasmids are released into the environment.