Polyhydroxyalkanoate biosynthesis and simultaneous remotion of organic inhibitors from sugarcane bagasse hydrolysate by Burkholderia sp.

Burkholderia sp. F24, originally isolated from soil, was capable of growth on xylose and removed organic inhibitors present in a hemicellulosic hydrolysate and simultaneously produced poly-3-hydroxybutyrate (P3HB). Using non-detoxified hydrolysate, Burkholderia sp. F24 reached a cell dry weight (CDW) of 6.8 g L^?1, containing 48 % of P3HB and exhibited a volumetric productivity (P_P3HB) of 0.10 g L^?1 h^?1. Poly-3-hydroxybutyrate-co-3-hydroxyvalerate copolymers (P3HB-co-3HV) were produced using xylose and levulinic acid (LA) as carbon sources. In shake flask cultures, the 3HV content in the copolymer increased from 9 to 43 mol% by adding LA from 1.0 to 5.0 g L^?1. In high cell density cultivation using concentrated hemicellulosic hydrolysate F24 reached 25.04 g L^?1 of CDW containing 49 % of P3HB and P_P3HB of 0.28 g L^?1 h^?1. Based on these findings, second-generation ethanol and bioplastics from sugarcane bagasse is proposed.     

Simultaneous production of propionic acid and vitamin B12 from corn stalk hydrolysates by Propionibacterium freudenreichii in an expanded bed adsorption bioreactor

Abstract

Vitamin B12 and propionic acid that were simultaneous produced by Propionibacterium freudenreichii are both favorable chemicals widely used in food preservatives, medicine, and nutrition. While the carbon source and propionic acid accumulation reflected fermentation efficiency. In this study, using corn stalk as a carbon source and fed-batch fermentation process in an expanded bed adsorption bioreactor was studied for efficient and economic biosynthesis of acid vitamin B12 and propionic. With liquid hot water pretreated corn stalk hydrolysates as carbon source, 28.65?mg L^?1 of vitamin B12 and 17.05?g L^?1 of propionic acid were attained at 168?h in batch fermentation. In order to optimize the fermentation outcomes, fed-batch fermentation was performed with hydrolyzed corn stalk in expanded bed adsorption bioreactor (EBAB), giving 47.6?mg L^?1 vitamin B12 and 91.4?g L^?1 of propionic acid at 258?h, which correspond to product yields of 0.37?mg g^?1 and 0.75?g g^?1, respectively. The present study provided a promising strategy for economically sustainable production of vitamin B12 and propionic acid by P. freudenreichii fermentation using biomass cornstalk as carbon source and expanded bed adsorption bioreactor.     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

Enhanced citric acid production by a yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> over-expressing a pyruvate carboxylase gene

In this study, after the expression of a pyruvate carboxylase gene (PYC) cloned from Meyerozyma guilliermondii in a marine-derived yeast Yarrowia lipolytica SWJ-1b, a transformant PG86 obtained had much higher PYC activity than Y. lipolytica SWJ-1b. At the same time, the PYC gene expression and citric acid (CA) production by the transformant PG86 were also greatly enhanced. When glucose concentration in the medium was 60.0 g L^?1, CA concentration formed by the transformant PG86 was 34.02 g L^?1, leading to a CA yield of 0.57 g g^?1 of glucose. During a 10-L fed-batch fermentation, the final concentration of CA was 101.0 ± 1.3 g L^?1, the yield was 0.89 g g^?1 of glucose, the productivity was 0.42 g L^?1 h^?1 and only 5.93 g L^?1 reducing sugar was left in the fermented medium within 240 h of the fed-batch fermentation. HPLC analysis showed that most of the fermentation products were CA.     

Isolation and characterization of chromium(VI)-reducing Bacillus sp. FY1 and Arthrobacter sp. WZ2 and their bioremediation potential

Two native bacterial strains, FY1 and WZ2, that showed high chromium(VI)-reducing ability were respectively isolated from electroplating and tannery effluent–contaminated sites and identified as Bacillus and Arthrobacter. The objective of the present study was to evaluate their potential for future application in soil bioremediation. The results showed that both Bacillus sp. FY1 and Arthrobacter sp. WZ2 were tolerant to 1000 mg L^?1 Cr(VI) and capable of reducing 78–85% and 75–82% of Cr(VI) (100–200 mg L^?1) within 24 h, respectively. The Cr(VI) reduction rate decreased with increasing levels of Cr(VI) concentration (200–1000 mg L^?1). The optimum pH, temperature, and inoculum concentration for Cr(VI) reduction were found to be between pH 7.0 and 8.0; 30 and 35°C; and 1 × 10⁸ cells ml^?1, respectively. Further evidence for the bioremediation potential of Bacillus sp. FY1 and Arthrobacter sp. WZ2 was provided by the high capacity to reduce 100, 200, and 500 mg kg^?1 Cr(VI) in contaminated soil by 83–91%, 78–85%, and 71–78% within 7 days, respectively. These findings demonstrated the high potential of Bacillus sp. FY1 and Arthrobacter sp. WZ2 for application in future soil bioremediation.     

CITRIC ACID PRODUCTION BY Candida SPECIES GROWN ON A SOY-BASED CRUDE GLYCEROL

Citric acid was produced by five species of the yeast Candida after growth on a medium containing soy biodiesel-based crude glycerol. After growth on a medium containing 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, Candida parapsilosis ATCC 7330 and C. guilliermondii ATCC 9058 produced the highest citric acid levels. On 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, the citric acid level produced by C. parapsilosis ATCC 7330 was 1.8 g L^?1 or 11.3 g L^?1, respectively, while C. guilliermondii ATCC 9058 produced citric acid concentrations of 3.0 g L^?1 or 10.4 g L^?1, respectively. Biomass production by C. guilliermondii ATCC 9058 on 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C was highest at 1.2 g L^?1 or 6.9 g L^?1, respectively. The citric acid yields observed for C. guilliermondii ATCC 9058 after growth on 10 g L^?1 or 60 g L^?1 crude glycerol (0.35 g g^?1 or 0.21 g g^?1, respectively) were generally higher than for the other Candida species tested. When similar crude glycerol concentrations were present in the culture medium, citric acid yields observed for some of the Candida species utilized in this study were about the same or higher compared to citric acid yields by Yarrowia lipolytica strains. Based on the findings, it appeared that C. guilliermondii ATCC 9058 was the most effective species utilized, with its citric acid production being similar to what has been observed when citric acid-producing strains of Y. lipolytica were grown on crude glycerol under batch conditions that could be of significance to biobased citric acid production.     

MODELING AND OPTIMIZATION OF GLUTAMIC ACID PRODUCTION USING MIXED CULTURE OF Corynebacterium glutamicum NCIM2168 AND Pseudomonas reptilivora NCIM2598

In this study, a hybrid system of response surface methodology followed by genetic algorithm has been adopted to optimize the production medium for L-glutamic acid fermentation with mixed cultures of Corynebacterium glutamicum and Pseudomonas reptilovora. The optimal combination of media components for maximal production of L-glutamic acid was found to be 49.99 g L^?1 of glucose, 10 g L^?1 of urea, 18.06% (v/v) of salt solution, and 4.99% (v/v) of inoculum size. The experimental glutamic acid yield at optimum condition was 19.69 g L^?1, which coincided well to the value predicted by the model (19.61 g L^?1). Using this methodology, a nonlinear regression model was developed for the glutamic acid production. The model was validated statistically and the determination coefficient (R ²) was found to be 0.99.     

Batch, fed-batch and repeated fed-batch fermentation processes of the marine thraustochytrid Schizochytrium sp. for producing docosahexaenoic acid

Different fermentation processes, including batch, fed-batch and repeated fed-batch processes by Schizochytrium sp., were studied and compared for the effective DHA-rich microbial lipids production. The comparison between different fermentation processes showed that fed-batch process was a more efficient cultivation strategy than the batch process. Among the four different feeding strategies, the glucose concentration feed-back feeding strategy had achieved the highest fermentation results of final cell dry weight, total lipids content, DHA content and DHA productivity of 72.37, 48.86, 18.38 g l^?1 and 138.8 mg l^?1 h^?1, respectively. The repeated fed-batch process had the advantages of reducing the time and cost for seed culture and inoculation between each fermentation cycles. The results of fermentation characteristics and lipid characterization of the repeated fed-batch process indicated that this repeated fed-batch process had promising industrialization prospect for the production of DHA-rich microbial lipids.     

Study of the physicochemical parameters and spontaneous fermentation during the traditional production of yakupa,an indigenous beverage produced by Brazilian Amerindians

Yakupa is a traditional non-alcoholic cassava beverage produced by Brazilian Amerindians. In this work the microbial dynamics and metabolites involved in yakupa fermentation were investigated by PCR-denaturing gradient gel electrophoresis and chromatography analysis, respectively. The lactic acid bacteria (LAB) population was higher than yeast in the beginning of fermentation (5 log CFU mL^?1 and 3 log CFU mL^?1, respectively) and after 36 h both population increased reaching 7 log CFU mL^?1, remaining constant until 60 h. Culture dependent and independent methods in combination identified the bacteria Lactobacillus fermentum, L. plantarum, Weissela cibaria and W. confusa, and yeasts Saccharomyces cerevisiae and Pichia kudriavzevii. Maltose (41.2 g L^?1), ethanol (6.5 g L^?1) and lactic acid (7.8 g L^?1) were the most abundant compounds identified by high performance liquid chromatography. Aldehydes, acids, alcohols and esters were identified by gas chromatography flame ionization detection. By the metabolites and PCA analysis we may assign the beverage’s flavor to the microbial metabolism. Heterolactic LAB and S. cerevisiae dominated the yakupa fermentation, being responsible for the organoleptic characteristics of the final product. This is the first time that the microbial dynamics and physicochemical parameters were investigated in the yakupa beverage and it may contribute to the future selection of starter cultures to perform yakupa fermentations.     

Evaluation of ethanol production by a new isolate of yeast during fermentation in synthetic medium and sugarcane bagasse hemicellulosic hydrolysate

A new xylose fermenting yeast was isolated from over-ripe banana by enrichment in xylose-containing medium. The phylogenetic analysis of ITS1-5.8S-ITS2 region sequences of ribosomal RNA of isolate BY2 revealed that it shows affiliation to genus Pichia and clades with Pichia caribbica. In batch fermentation, Pichia strain BY2 fermented xylose, producing 15 g l^?1 ethanol from 30 g l^?1 xylose under shaking conditions at 28°C, with ethanol yield of 0.5 g g^?1 and volumetric productivity of 0.31 g l^?1 h^?1. The optimum pH range for ethanol production from xylose by Pichia strain BY2 was 5–7. Pichia strain BY2 also produced 6.08 g l^?1 ethanol from 30 g l^?1 arabinose. Pichia strain BY2 can utilize sugarcane bagasse hemicellulose acid hydrolysate for alcohol production, efficiency of fermentation was improved by neutralization, and sequential use of activated charcoal adsorption method. Percent total sugar utilized and ethanol yield for the untreated hydrolysate was 17.14% w/v and 0.33 g g^?1, respectively, compared with 66.79% w/v and 0.45 g g^?1, respectively, for treated hemicellulose acid hydrolysate. This new yeast isolate showed ethanol yield of 0.45 g g^?1 and volumetric productivity of 0.33 g l^?1 h^?1 from sugarcane bagasse hemicellulose hydrolysate detoxified by neutralization and activated charcoal treatment, and has potential application in practical process of ethanol production from lignocellulosic hydrolysate.     

Effective production of biologically active water-soluble β-1,3-glucan by a coupled system of Agrobacterium sp. and Trichoderma harzianum

Water-soluble β-1,3-glucan (w-glucan) prepared from curdlan is reported to possess various bioactive and medicinal properties. To develop an efficient and cost-effective microbial fermentation method for the direct production of w-glucan, a coupled fermentation system of Agrobacterium sp. and Trichoderma harzianum (CFS-AT) was established. The effects of Tween-80, glucose flow rate, and the use of a dissolved oxygen (DO) control strategy on w-glucan production were assessed. The addition of 10?g?L^?1 Tween-80 to the CFS-AT enhanced w-glucan production, presumably by loosening the curdlan ultrastructure and increasing the efficiency of curdlan hydrolysis. A two-stage glucose and DO control strategy was optimal for w-glucan production. At the T. harzianum cell growth stage, the optimal glucose flow rate and agitation speed were 2.0?g?L^?1 hr^?1 and 600?rpm, respectively, and at the w-glucan production stage, they were 0.5?g?L^?1 hr^?1 and 400?rpm, respectively. W-glucan production reached 17.31?g?L^?1, with a degree of polymerization of 19–25. Furthermore, w-glucan at high concentrations exhibited anti-tumor activity against MCF-7, HepG2, and Hela cancer cells in vitro. This study provides a novel, cost-effective, eco-friendly, and efficient microbial fermentation method for the direct production of biologically active w-glucan.     

Metabolic engineering of Bacillus subtilis for the co-production of uridine and acetoin

In this study, a uridine and acetoin co-production pathway was designed and engineered in Bacillus subtilis for the first time. A positive correlation between acetoin and uridine production was observed and investigated. By disrupting acetoin reductase/2,3-butanediol dehydrogenasegenebdhA, the acetoin and uridine yield was increased while 2,3-butanediol formation was markedly reduced. Subsequent overexpression of the alsSD operon further improved acetoin yield and abolished acetate formation. After optimization of fermentation medium, key supplementation strategies of yeast extract and soybean meal hydrolysate were identified and applied to improve the co-production of uridine and acetoin. With a consumption of 290.33 g/L glycerol, the recombinant strain can accumulate 40.62 g/L uridine and 60.48 g/L acetoin during 48 h of fed-batch fermentation. The results indicate that simultaneous production of uridine and acetoin is an efficient strategy for balancing the carbon metabolism in engineered Bacillus subtilis. More importantly, co-production of value-added products is a possible way to improve the economics of uridine fermentation.

     

Enhancing ethanol production from cellulosic sugars using <Emphasis Type="Italic">Scheffersomyces (Pichia) stipitis</Emphasis>

Studies were performed on the effect of CaCO₃ and CaCl₂ supplementation to fermentation medium for ethanol production from xylose, glucose, or their mixtures using Scheffersomyces (Pichia) stipitis. Both of these chemicals were found to improve maximum ethanol concentration and ethanol productivity. Use of xylose alone resulted in the production of 20.68 ± 0.44 g L^?1 ethanol with a productivity of 0.17 ± 0.00 g L^?1 h^?1, while xylose plus 3 g L^?1 CaCO₃ resulted in the production of 24.68 ± 0.75 g L^?1 ethanol with a productivity of 0.21 ± 0.01 g L^?1 h^?1. Use of xylose plus glucose in combination with 3 g L^?1 CaCO₃ resulted in the production of 47.37 ± 0.55 g L^?1 ethanol (aerobic culture), thus resulting in an ethanol productivity of 0.39 ± 0.00 g L^?1 h^?1. These values are 229 % of that achieved in xylose medium. Supplementation of xylose and glucose medium with 0.40 g L^?1 CaCl₂ resulted in the production of 44.84 ± 0.28 g L^?1 ethanol with a productivity of 0.37 ± 0.02 g L^?1 h^?1. Use of glucose plus 3 g L^?1 CaCO₃ resulted in the production of 57.39 ± 1.41 g L^?1 ethanol under micro-aerophilic conditions. These results indicate that supplementation of cellulosic sugars in the fermentation medium with CaCO₃ and CaCl₂ would improve economics of ethanol production from agricultural residues.     

Cellulosic Butanol (ABE) Biofuel Production from Sweet Sorghum Bagasse (SSB): Impact of Hot Water Pretreatment and Solid Loadings on Fermentation Employing <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> P260

A novel butanol fermentation process was developed in which sweet sorghum bagasse (SSB) was pretreated using liquid hot water (LHW) pretreatment technique followed by enzymatic hydrolysis and butanol (acetone butanol ethanol (ABE)) fermentation. A pretreatment temperature of 200 °C resulted in the generation of a hydrolyzate that inhibited butanol fermentation. When SSB pretreatment temperature was decreased to 190 °C (0-min holding time), the hydrolyzate was successfully fermented without inhibition and an ABE productivity of 0.51 g L^?1 h^?1 was achieved which is comparable to the 0.49 g L^?1 h^?1 observed in the control fermentation where glucose was used as a feedstock. These results are based on the use of 86 g L^?1 SSB solid loadings in the pretreatment reactors. We were also able to increase SSB solid loadings from 120 to 200 g L^?1 in the pretreatment step (190 °C) followed by hydrolysis and butanol fermentation. As pretreatment solid loadings increased, ABE yield remained in the range of 0.38–0.46. In these studies, a maximum ABE concentration of 16.88 g L^?1 was achieved. Using the LHW pretreatment technique, 88.40–96.00 % of polymeric sugars (cellulose + hemicellulose) were released in the SSB hydrolyzate. The LHW pretreatment technique does not require chemical additions and is environmentally friendly, and the hydrolyzate can be used successfully for butanol fermentation.     

n-Butanol Production from Acid-Pretreated Jatropha Seed Cake by Clostridium acetobutylicum

n-Butanol fermentation using Clostridium strains suffers from low titers due to the inability of the strains to tolerate n-butanol. The current study demonstrates a process to get high titer of n-butanol in a single batch mode from the renewable feedstock jatropha seed cake by employing Clostridium acetobutylicum. Chemical mutagenesis was done for improvement of the strain for better n-butanol tolerance and production. Optimization of the parameters resulted in 13.2 g L^?1 of n-butanol in 120 h using acid-treated jatropha seed cake hydrolysate (7 %?w/v) in anaerobic sugar medium. The process was scaled up to 15 L level, yielding 18.6 g L^?1 of n-butanol in 72 h. The strain was found to be tolerant up to 30 g L^?1 n-butanol under optimized conditions. The n-butanol tolerance was accompanied by over-expression of the stress response protein, GroEL, change in fatty acid profile, and ability to accumulate rhodamine 6G in the strain. The study has a significant impact on economically producing n-butanol from biomass.     

Production of butanol and isopropanol with an immobilized <Emphasis Type="Italic">Clostridium</Emphasis>

Clostridium beijerinckii optinoii is a Clostridium species that produces butanol, isopropanol and small amounts of ethanol. This study compared the performances of batch and continuous immobilized cell fermentations, investigating how media flow rates and nutritional modification affected solvent yields and productivity. In 96-h batch cultures, with 80 % of the 30 g L^?1 glucose consumed in synthetic media, solvent concentration was 9.45 g L^?1 with 66.0 % as butanol. In a continuous fermentation using immobilized C. beijerinckii optinoii cells, also with 80 % of 30 g L^?1 glucose utilization, solvent productivity increased to 1.03 g L^?1 h^?1. Solvent concentration reached 12.14 g L^?1 with 63.0 % as butanol. Adjusting the dilution rate from 0.085 to 0.050 h^?1 to allow extended residence time in column was required when glucose concentration in fresh media was increased from 30 to 50 g L^?1. When acetate was used to improve the buffer capacity in media, the solvent concentration reached 12.70 on 50 g L^?1 glucose. This continuous fermentation using immobilized cells showed technical feasibility for solvent production.     

Semi-industrial scale (30 m<Superscript>3</Superscript>) fed-batch fermentation for the production of <Emphasis Type="SmallCaps">d</Emphasis>-lactate by <Emphasis Type="Italic">Escherichia coli</Emphasis> strain HBUT-D15

d(?)-lactic acid is needed for manufacturing of stereo-complex poly-lactic acid polymer. Large scale d-lactic acid fermentation, however, has yet to be demonstrated. A genetically engineered Escherichia coli strain, HBUT-D, was adaptively evolved in a 15% calcium lactate medium for improved lactate tolerance. The resulting strain, HBUT-D15, was tested at a lab scale (7 L) by fed-batch fermentation with up to 200 g L^?1 of glucose, producing 184–191 g L^?1 of d-lactic acid, with a volumetric productivity of 4.38 g L^?1 h^?1, a yield of 92%, and an optical purity of 99.9%. The HBUT-D15 was then evaluated at a semi-industrial scale (30 m³) via fed-batch fermentation with up to 160 g L^?1 of glucose, producing 146–150 g L^?1 of d-lactic acid, with a volumetric productivity of 3.95–4.29 g L^?1 h^?1, a yield of 91–94%, and an optical purity of 99.8%. These results are comparable to that of current industrial scale l(+)-lactic acid fermentation.     

Microbial production of 2,3-butanediol by a newly-isolated strain of Serratia marcescens

A newly-isolated strain of Serratia marcescens, G12, was characterized for 2,3-butanediol (2,3-BD) production. In shake-flask and batch fermentations, 2,3-BD reached 48.5 and 51 g l^?1, respectively. Low amounts of (~8 g l^?1) of acetoin were also formed. In fed-batch fermentations, strain G12 produced 72.8 g 2,3-BD l^?1 with glucose initially at 130 g l^?1. When aeration rate was increased to 2.5 vvm for the fermentation process, 2,3-BD reached 87.8 g l^?1 and the highest productivity was 1.6 g l^?1 h^?1. Acetoin was at 6.2 g l^?1. G12 therefore may be a suitable candidate strain for large-scale production of 2,3-BD.     

Evaluation of fermentative potential of <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> ATCC 36907 in cellulosic and hemicellulosic sugarcane bagasse hydrolysates on xylitol and ethanol production

This paper evaluates the fermentative potential of Kluyveromyces marxianus grown in sugarcane bagasse cellulosic and hemicellulosic hydrolysates obtained by acid hydrolysis. Ethanol was obtained from a single glucose fermentation product, whereas xylose assimilation resulted in xylitol as the main product and ethanol as a by-product derived from the metabolism of this pentose. Fermentation performed in a simulated hydrolysate medium with a glucose concentration similar to that of the hydrolysate resulted in ethanol productivity (Qp?=?0.86 g L^?1 h^?1) that was tenfold higher than the one observed in the cellulosic hydrolysate. However, the use of hemicellulosic hydrolysate favored xylose assimilation in comparison with simulated medium with xylose and glucose concentrations similar to those found in this hydrolysate, without toxic compounds such as acetic acid and phenols. Under this condition, xylitol yield was 53.8 % higher in relation to simulated medium. Thus, the total removal of toxic compounds from the hydrolysate is not necessary to obtain bioproducts from lignocellulosic hydrolysates.     

Optimization of culture conditions and bench-scale production of anticancer enzyme L-asparaginase by submerged fermentation from Aspergillus terreus CCT 7693

L-Asparaginase amidohydrolase (EC 3.5.1.1) has received significant attention owing to its clinical use in acute lymphoblastic leukemia treatment and non-clinical applications in the food industry to reduce acrylamide (toxic compound) formation during the frying of starchy foods. In this study, a sequential optimization strategy was used to determine the best culture conditions for L-asparaginase production from filamentous fungus Aspergillus terreus CCT 7693 by submerged fermentation. The cultural conditions were studied using a 3-level, central composite design of response surface methodology, and biomass and enzyme production were optimized separately. The highest amount of biomass (22.0?g·L^?1) was obtained with modified Czapek–Dox medium containing glucose (14?g·L^?1), L-proline (10?g·L^?1), and ammonium nitrate (2?g·L^?1) fermented at 37.2?°C and pH 8.56; for maximum enzyme production (13.50?U·g^?1), the best condition was modified Czapek–Dox medium containing glucose (2?g·L^?1), L-proline (10?g·L^?1), and inoculum concentration of 4.8?×?10⁸ espore·mL^?1 adjusted to pH 9.49 at 34.6?°C. The L-asparaginase production profile was studied in a 7?L bench-scale bioreactor and a final specific activity of 13.81?U·g^?1 was achieved, which represents an increase of 200% in relation to the initial non-optimized conditions.