A novel amperometric bienzymatic biosensor based on alcohol oxidase coupled PVC reaction cell and nanomaterials modified working electrode for rapid quantification of alcohol

Abstract

A new amperometric sensor has been fabricated for sensitive and rapid quantification of ethanol. The biosensor assembly was prepared by covalently immobilizing alcohol oxidase (AOX) from Pichia pastoris onto chemically modified surface of polyvinylchloride (PVC) beaker with glutaraldehyde as a coupling agent followed by immobilization of horseradish peroxidase (HRP), silver nanoparticles (AgNPs), chitosan (CHIT), carboxylated multi-walled carbon nanotubes (c-MWCNTs) and nafion (Nf) nanocomposite onto the surface of Au electrode (working electrode). Owing to properties such as chemical inertness, light weight, weather resistance, corrosion resistance, toughness and cost-effectiveness, PVC membrane has attracted a growing interest as a support for enzyme immobilization in the development of biosensors. The amperometric biosensor displayed optimum response within 8?s at pH 7.5 and 35°C temperature. A linear response to alcohol in the range of 0.01mM–50?mM and 0.0001?µM as a minimum limit of detection was displayed by the proposed biosensor with excellent storage stability (190?days) at 4°C. The sensitivity of the sensor was found to be 155?µA mM^?1?cm^?2. A good correlation (R²?=?0.99) was found between alcohol level in commercial samples as evaluated by standard ethanol assay kit and the current biosensor which validates its performance.     

Extradiol dioxygenase-SiO₂ sol-gel modified electrode for catechol and its derivatives detection

A feasible and sensitive biosensor for catechol and its derivatives using 2,3-dihydroxybiphenyl 1,2-dioxygenase (BphC)-modified glassy carbon electrode was successfully constructed by polyvinyl alcohol-modified SiO? sol-gel method. The as-prepared biosensor was characterized by electrochemical impedance spectroscopy, and the surface topography of the film was imaged by atomic force microscope. Liquid chromatography-tandem mass spectrometry was applied to reveal the catalytic mechanism. BphC embedded in SiO? gel maintained its bioactivity well and exhibited excellent eletrocatalytical response to both catechol and some of its derivatives (such as 3-methylcatechol and 4-methylcatechol). The biosensor showed a linear amperometric response range between 0.002 mM and 0.8 mM catechol. And the sensitivity was 1.268 mA/(mM cm2) with a detection limit of 0.428 μM for catechol (S/N = 3). Furthermore, the BphC biosensor exhibited perfect selectivity for catechol in the mixtures of catechol and phenol. It was suggested that this flexible protocol would open up a new avenue for designing other ring-cleavage enzyme biosensors, which could be widely used for monitoring various kinds of environmental pollutants.     

A novel biosensor based on Lactobacillus acidophilus for determination of phenolic compounds in milk products and wastewater

Different branches of industry need to use phenolic compounds (PCs) in their production, so determination of PCs sensitively, accurately, rapidly, and economically is very important. For the sensitive determination of PCs, some biosensors based on pure polyphenol oxidase, plant tissue and microorganisms were developed before. But there has been no study to develop a microbial phenolic compounds biosensor based on Lactobacillus species, which contain polyphenol oxidase enzyme. In this study, we used different forms of Lactobacillus species as enzyme sources of biosensor and compared biosensor performances of these forms for determination of PCs. For this purpose, we used lyophilized Lactobacillus cells (containing L. bulgaricus, L. acidophilus, Streptococcus thermophilus), pure L. acidophilus, pure L. bulgaricus, and L. acidophilus- and L. bulgaricus adapted to catechol in Lactobacilli MRS Broth. The most suitable form was determined and optimization studies of the biosensor were carried out by using this form. For preparing the bioactive layer of the biosensor, the Lactobacillus cells were immobilized in gelatin by using glutaraldehyde. In the study, we used catechol as a substrate. Phenolic compound determination is based on the assay of the differences on the respiration activity of the cells on the oxygen meter in the absence and the presence of catechol. The microbial biosensor response depends directly on catechol concentration between 0.5 and 5.0 mM with 18 min response time. In the optimization studies of the microbial biosensor the most suitable microorganism amount was found to be 10 mg, and also phosphate buffer (pH 8.0; 50 mM) and 37.5 °C were obtained as the optimum working conditions. In the characterization studies of the microbial biosensor some parameters such as substrate specificity on the biosensor response and operational and storage stability were examine. Furthermore, the determination of PC levels in synthetic wastewater, industrial wastewater, and milk products was investigated by using the developed biosensor under optimum conditions.     

Phenolic compounds inhibit the aldose reductase enzyme from the sheep kidney

Aldose reductase (AR) is the key enzyme for the polyol pathway and responsible for sorbitol accumulation during the hyperglycemia. The present article focuses on the role of phenol, pyrogallol, hydroquinone, resorcinol, catechol, and phloroglucinol in in vitro inhibition of AR. For this purpose, AR was purified from the sheep kidney with 5.33 EU mg^?1 specific activity and 0.64% yield using several chromatographic methods. Various concentrations of the compounds were tested on in vitro AR activity. IC₅₀ values were found for phenol, pyrogallol, hydroquinone, resorcinol, catechol, and phloroglucinol as 6.5, 1.13, 5.45, 2.21, 1.8, and 2.09 mM, respectively, and their K_i constant was calculated as 3.45 ± 0.92, 0.96 ± 0.28, 3.07 ± 0.46, 1.59 ± 0.43, 2.5 ± 0.35, and 2.54 ± 0.45 mM, respectively. Pyrogallol showed better inhibitory effect compared to the other compounds. The inhibition mechanisms of all compounds were noncompetitive. In the presents study, in vitro AR inhibition was examined by the phenolic compounds.     

A fluorescent glucose biosensor based on immobilized glucose oxidase on bamboo inner shell membrane

A fluorescent glucose biosensor was constructed by immobilizing glucose oxidase on a bamboo inner shell membrane with glutaraldehyde as a cross-linker. The detection scheme was based on the depletion of dissolved oxygen content upon exposure to glucose solution with a concomitant increase in the fluorescence intensity of an oxygen transducer, tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(Pi) ditetrakis(4-chlorophenyl)borate. The enzyme immobilization, effect of pH, temperature and ionic strength have been studied in detail. The biosensor exhibited repeatable response to a 2.0 mM glucose solution with a relative standard deviation of 3.0% (n = 10). It showed good storage stability and maintained 95% of its initial response after it had been kept at 4 degrees C for 8 months. The biosensor has a linear response range of 0.0-0.6 mM glucose with a detection limit of 58 microM (S/N = 3). Common potential interferants in samples do not pose any significant interference on the response of the glucose biosensor. It was successfully applied to the determination of glucose content in some commercial wines and medical glucose injections.     

Silica sol-gel composite film as an encapsulation matrix for the construction of an amperometric tyrosinase-based biosensor

An amperometric tyrosinase enzyme electrode for the determination of phenols was developed by a simple and effective immobilization method using sol-gel techniques. A grafting copolymer was introduced into sol-gel solution and the composition of the resultant organic-inorganic composite material was optimized, the tyrosinase retained its activity in the sol-gel thin film and its response to several phenol compounds was determined at 0 mV vs. Ag/AgCl (sat. KCl). The dependences of the current response on pH, oxygen level and temperature were studied, and the stability of the biosensor was also evaluated. The sensitivity of the biosensor for catechol, phenol and p-cresol was 59.6, 23.1 and 39.4 microA/mM, respectively. The enzyme electrode maintained 73% of its original activity after intermittent use for three weeks when storing in a dry state at 4 degrees C.     

Enhanced direct electrochemistry of glucose oxidase and biosensing for glucose via synergy effect of graphene and CdS nanocrystals

Integrating graphene-based composites with enzyme provides a potent strategy to enhance biosensor performance due to their unique physicochemical properties. Herein we report on the utilization of graphene-CdS (G-CdS) nanocomposite as a novel immobilization matrix for the enzymes, which glucose oxidase (GOD) was chosen as model enzyme. In comparison with the graphene sheet and CdS nanocrystal, G-CdS nanocomposite exhibited excellent electron transfer properties for GOD with the rate constant (k(s)) of 5.9 s(-1) due to the synergy effect of graphene sheet and CdS nanocrystals. Further, based on the decrease of the electrocatalytic response of the reduced form of GOD to dissolved oxygen, the obtained glucose biosensor displays satisfactory analytical performance over an acceptable linear range from 2.0 to 16 mM with a detection limit of 0.7 mM, and also prevents the effects of interfering species, which is suitable for glucose determination by real samples. These results mean that this immobilization matrix not only can be used for immobilizing GOD, but also can be extended to other enzymes and bioactive molecules, thus providing a promising platform for the development of biosensors.     

A Novel Catechol Oxidase Enzyme Electrode for the Specific Determination of Catechol

An enzyme electrode for the specific determination of catechol was developed by using catechol oxidase (EC 1.10.3.1) from eggplant (Solanum melangena L.) in combination with a dissolved oxygen probe. Optimization studies of the prepared catechol oxidase enzyme electrode established a phosphate buffer 50 mM at pH 7.0 and 35°C to provide the optimum conditions for affirmative electrode response. The enzyme electrode response depended linearly on a catechol concentration range of 5?10^-7-30?10^-5 M with a response time of 25 sec and substrate specificity of the catechol oxidase electrode of 100%. The biosensor retained its enzyme activity for at least 70 days.     

Induction of phenol-metabolizing enzymes in Trichosporon cutaneum

Some aspects of the induction of enzymes participating in the metabolism of phenol and resorcinol in Trichosporon cutaneum were studied using intact cells and cell-free preparations.Activities of phenol hydroxylase (1.14.13.7), catechol 1,2-oxygenase (1.13.11.1), cis,cis-muconate cyclase (5.5.1.-), delactonizing enzyme(s) and maleolylacetate reductase were 50–400 times higher in fully induced cells than in noninduced cells.In addition to phenol and resorcinol, also catechol, cresols and fluorophenols could induce phenol hydroxylase.The induction was severely inhibited by phenol concentrations higher than 1 mM. Using optimum inducer concentrations (0.01–0.10 mM), it took more than 8 h to obtain full induction, whether in proliferating or in nonproliferating cells.Phenol hydroxylase, catechol 1,2-oxygenase and cis,cis-muconate cyclase were induced simultaneously. The synthesis of the de-lactonizing activity was delayed in relation to these three preceeding enzymes of the pathway.High glucose concentration (over 15 mM) inhibited completely the induction of phenol oxidation by nonproliferating cells. It also inhibited phenol oxidation by pre-induced cells.Among the NADPH-generating enzymes, the activity of iso-citrate dehydrogenase was elevated in cells grown on phenol and resorcinol instead of glucose.     

Covalent conjugation of avidin with dye-doped silica nanopaticles and preparation of high density avidin nanoparticles as photostable bioprobes

A sensitive, selective and stable amperometric glucose biosensor employing novel PtPd bimetallic nanoparticles decorated on multi-walled carbon nanotubes (PtPd-MWCNTs) was investigated. PtPd-MWCNTs were prepared by a modified Watanabe method, and characterized by XRD and TEM. The biosensor was constructed by immobilizing the PtPd-MWCNTs catalysts in a Nafion film on a glassy carbon electrode. An inner Na?on film coating was used to eliminate common interferents such as uric acid, ascorbic acid and fructose. Finally, a highly porous surface with an orderly three-dimensional network enzyme layer (CS-GA-GOx) was fabricated by electrodeposition. The resulting biosensor exhibited a good response to glucose with a wide linear range (0.062-14.07 mM) and a low detection limit 0.031 mM. The biosensor also showed a short response time (within 5 s), and a high sensitivity (112 μA mM(-1)cm(-2)). The Michaelis-Menten constant (K(m)) was determined as 3.3 mM. In addition, the biosensor exhibited high reproducibility, good storage stability and satisfactory anti-interference ability. The applicability of the biosensor to actual serum sample analysis was also evaluated.     

Kinetics of anaerobic biodegradation of resorcinol catechol and hydroquinone in upflow fixed film-fixed bed reactors

Biodegradation of resorcinol, catechol and hydroquinone under anaerobic conditions was studied in identical upflow fixed film-fixed bed reactors. Kinetic constants; V(max) (maximum substrate utilization rate) and K(s) (Monod's half saturation constant) were determined for the three compounds using Lineweaver-Burk plot. V(max) for resorcinol was highest, followed by catechol and then by hydroquinone. When both resorcinol and catechol were fed to the resorcinol-acclimated reactor, resorcinol degradation was inhibited by catechol. The inhibition was of the uncompetitive type and V(max) for resorcinol was reduced by catechol.     

Glucose biosensor prepared by glucose oxidase encapsulated sol-gel and carbon-nanotube-modified basal plane pyrolytic graphite electrode

A new glucose biosensor has been fabricated by immobilizing glucose oxidase into a sol-gel composite at the surface of a basal plane pyrolytic graphite (bppg) electrode modified with multiwall carbon nanotube. First, the bppg electrode is subjected to abrasive immobilization of carbon nanotubes by gently rubbing the electrode surface on a filter paper supporting the carbon nanotubes. Second, the electrode surface is covered with a thin film of a sol-gel composite containing encapsulated glucose oxidase. The carbon nanotubes offer excellent electrocatalytic activity toward reduction and oxidation of hydrogen peroxide liberated in the enzymatic reaction between glucose oxidase and glucose, enabling sensitive determination of glucose. The amperometric detection of glucose is carried out at 0.3 V (vs saturated calomel electrode) in 0.05 M phosphate buffer solution (pH 7.4) with linear response range of 0.2-20 mM glucose, sensitivity of 196 nA/mM, and detection limit of 50 microM (S/N=3). The response time of the electrode is < 5s when it is stored dried at 4 degrees C, the sensor showed almost no change in the analytical performance after operation for 3 weeks. The present carbon nanotube sol-gel biocomposite glucose oxidase sensor showed excellent properties for the sensitive determination of glucose with good reproducibility, remarkable stability, and rapid response and in comparison to bulk modified composite biosensors the amounts of enzyme and carbon nanotube needed for electrode fabrication are dramatically decreased.     

Freeze-dried recombinant bacteria for on-site detection of phenolic compounds by color change

We herein report the development of a recombinant bacterial biosensor for the rapid and easy detection of phenolic compounds in the field. A plasmid was designed to encode a beta-galactosidase reporter gene under the control of capR, an activator involved in phenolic compound degradation. The construct was transformed into Escherichia coli, and transformed cells were stored after being freeze-dried in the presence of sucrose. For detection of phenolic compounds, the cells were rehydrated, and used instantly, without any growth step. In the presence of 0.1 microM-10mM phenol, we observed a red color from hydrolysis of chlorophenol red beta-D-galactopyranoside (CPRG) or an indigo color from hydrolysis of X-galactopyranoside (X-gal). Other phenolic compounds could be detected by this system, including catechol, 2-methylphenol, 2-chlorophenol, 3-methylphenol, 2-nitrophenol, and 4-chlorophenol. These results suggest that this novel bacteria biosensor may be useful for easy, on-site detection of phenolic compounds without the need for unwieldy equipment or sample pretreatment. Indeed, biosensor systems involving beta-galactosidase-expressing freeze-dried recombinant bacteria could prove useful for the in situ detection of many more compounds in the future.     

Label-free detection of bacterial RNA using polydiacetylene-based biochip

A novel acetylcholinesterase (AChE)/choline oxidase (ChOx) bienzyme amperometric acetylcholine biosensor based on gold nanoparticles (AuNPs) and multi-walled carbon nanotubes (MWCNTs) has been successfully developed by self-assembly process in combination of sol-gel technique. A thiolated aqueous silica sol containing MWCNTs and ChOx was first dropped on the surface of a cleaned Pt electrode, and then AuNPs were assembled with the thiolated sol-gel network. Finally, the alternate deposition of poly (diallyldimethylammonium chloride) (PDDA) and AChE was repeated to assemble different layers of PDDA-AChE on the electrode for optimizing AChE loading. Among the resulting biosensors, the biosensor based on two layers of PDDA-AChE multilayer films showed the best performance. It exhibited a wide linear range, high sensitivity and fast amperometric response, which were 0.005-0.4mM, 3.395 μA/mM, and within 15s, respectively. The biosensor showed long-term stability and acceptable reproducibility. More importantly, this study could provide a simple and effective multienzyme immobilization platform for meeting the demand of the effective immobilization enzyme on the electrode surface.     

Catechol biosensing using a nanostructured layer-by-layer film containing Cl-catechol 1,2-dioxygenase

The detection of aromatic compounds from pesticides and industrial wastewater has become of great interest, since these compounds withstand chemical oxidation and biological degradation, accumulating in the environment. In this work, a highly sensitive biosensor for detecting catechol was obtained with the immobilization of Cl-catechol 1,2-dioxygenase (CCD) in nanostructured films. CCD layers were alternated with poly(amidoamine) generation 4 (PAMAM G4) dendrimer using the electrostatic layer-by-layer (LbL) technique. Circular dichroism (CD) measurements indicated that the immobilized CCD preserved the same conformation as in solution. The thickness of the very first CCD layers in the LbL films was estimated at ca. 3.6 nm, as revealed by surface plasmon resonance (SPR). PAMAM/CCD 10-bilayer films were employed in detecting diluted catechol solutions using either an optical or electrical approach. Due to the mild immobilization conditions employed, especially regarding the pH and ionic strength of the dipping solutions, CCD remained active in the films for periods longer than 3 weeks. The optical detection comprised absorption experiments in which the formation of cis-cis muconic acid, resulting from the reaction between CCD and catechol, was monitored by measuring the absorbance at 260 nm after film immersion in catechol solutions. The electrical detection was carried out using LbL films deposited onto gold-interdigitated electrodes immersed in aqueous solutions at different catechol concentrations. Using impedance spectroscopy in a broad frequency range (1Hz-1kHz), we could detect catechol in solutions at concentrations as low as 10(-10) M.     

Immobilization of inulinase obtained by solid-state fermentation using spray-drying technology

Abstract

This work focuses on the immobilization of a crude inulinase extract obtained by solid-state fermentation using spray-drying technology. Maltodextrin and arabic gum were used as immobilizing agents. The effects of inlet air temperature, maltodextrin/arabic gum ratio and mass fraction of crude enzyme extract on the activity of immobilized inulinase were assessed using a central composite rotatable design (CCRD) (2³). The optimum operational conditions for the immobilization of inulinase by spray-drying was obtained at an inlet air temperature of 200°C, mass fraction of crude enzyme extract of 0.5 wt% and using only arabic gum as immobilizing agent. The immobilized enzyme had good thermostability, comparable with other inulinases obtained from different microorganisms. The method used gave good enzyme activity after immobilization and could be applied to other enzymes which have good thermal stability.     

A new variant activator involved in the degradation of phenolic compounds from a strain of Pseudomonas putida

A new variant type of regulatory activator and relevant promoters (designated capR, Pr and Po) involved in the metabolism of phenolic compounds were cloned from Pseudomonas putida KCTC1452 by using PCR. The deduced amino acid sequence of CapR revealed a difference in nine amino acids from the effector binding domain of DmpR. To measure effector specificity, plasmids were constructed in such a way that the expression of luc gene for firefly luciferase or lacZ for beta-galactosidase as a reporter was under the control of capR. When Escherichia coli transformed with the plasmids was exposed to phenol, dramatic increases in the activity of luciferase or beta-galactosidase were observed in a range of 0.01-1 mM. Among various phenolic compounds tested, other effective compounds included catechol, 2-methylphenol, 3-methylphenol, 4-methylphenol, 2-chlorophenol, 4-chlorophenol, 2-nitrophenol, resorcinol, and 2, 5-dimethylphenol. The results indicate that CapR has effector specificity different from other related activators, CatR and DmpR. Waste water and soil potentially containing phenolic compounds were also tested by this system and the results were compared with chemical and GC data. The present results indicate that the biosensor consisting of capR and the promoters may be utilized for the development of a phenolic compounds-specific biosensor in monitoring the environmental pollutant.     

Development of a high analytical performance-tyrosinase biosensor based on a composite graphite-Teflon electrode modified with gold nanoparticles

The design of a new tyrosinase biosensor with improved stability and sensitivity is reported. The biosensor design is based on the construction of a graphite-Teflon composite electrode matrix in which the enzyme and colloidal gold nanoparticles are incorporated by simple physical inclusion. Experimental variables such as the colloidal gold loading into the composite matrix, the enzyme loading and the potential applied to the bioelectrode were optimized. The Tyr-Au(coll)-graphite-Teflon biosensor exhibited suitable amperometric responses at -0.10 V for the different phenolic compounds tested (catechol; phenol; 3,4-dimethylphenol; 4-chloro-3-methylphenol; 4-chlorophenol; 4-chloro-2-methylphenol; 3-methylphenol and 4-methylphenol). The limits of detection obtained were 3 nM for catechol, 3.3 microM for 4-chloro-2-methylphenol, and approximately 20 nM for the rest of phenolic compounds. The presence of colloidal gold into the composite matrix gives rise to enhanced kinetics of both the enzyme reaction and the electrochemical reduction of the corresponding o-quinones at the electrode surface, thus allowing the achievement of a high sensitivity. The biosensor exhibited an excellent renewability by simple polishing, with a lifetime of at least 39 days without apparent loss of the immobilized enzyme activity. The usefulness of the biosensor for the analysis of real samples was evaluated by performing the estimation of the content of phenolic compounds in water samples of different characteristics.     

Amperometric glucose biosensor based on self-assembly hydrophobin with high efficiency of enzyme utilization

Hydrophobins are a family of natural self-assembling proteins with high biocompability, which are apt to form strong and ordered assembly onto many kinds of surfaces. These physical-chemical and biological properties make hydrophobins suitable for surface modification and biomolecule immobilization purposes. A class II hydrophobin HFBI was used as enzyme immobilization matrix on platinum electrode to construct amperometric glucose biosensor. Permeability of HFBI self-assembling film was optimized by selecting the proper HFBI concentration for electrode modification, in order to allow H₂O₂ permeating while prevent interfering compounds accessing. HFBI self-assembly and glucose oxidase (GOx) immobilization was monitored by quartz crystal microbalance (QCM), and characterization of the modified electrode surface was obtained by scanning electron microscope (SEM). The resulting glucose biosensors showed rapid response time within 6 s, limits of detection of 0.09 mM glucose (signal-to-noise ratio = 3), wide linear range from 0.5 to 20 mM, high sensitivity of 4.214 × 10⁻³ A M⁻¹ cm⁻², also well selectivity, reproducibility and lifetime. The all-protein modified biosensor exhibited especially high efficiency of enzyme utilization, producing at most 712 μA responsive current for per unit activity of GOx. This work provided a promising new immobilization matrix with high biocompatibility and adequate electroactivity for further research in biosensing and other surface functionalizing.     

Enzyme field effect transistor (ENFET) for estimation of triglycerides using magnetic nanoparticles

Ion-selective field effect transistor (ISFET) is a robust platform to develop biosensors. A variety of methods are used including covalent attachment or polymer entrapment, to associate enzymes or antibodies to the gate surface of a FET. We have employed a novel method of retaining the enzyme molecules at the gate surface by immobilizing the enzyme on magnetic nickelferrite nanoparticles and applying a permanent magnet below the gate of the FET. We were able to estimate the triglyceride concentrations in the range of 0.1–1.5% by immobilizing a thermostable lipase on nanoparticles. Tributyrin, trioctanoate and triolein have given similar results. The reaction volume could be scaled down to 0.2 ml without a loss in slope or sensitivity. Ionic strength (>150 mM NaCl) has a strong influence on the sensitivity of the measurement. The advantages of this configuration of enzyme biosensor are reduction of mass transfer problems, increasing the amount of enzyme at the gate surface besides providing an opportunity to use a single FET device for multiple analyte detection.