Detection and recovery of hydrolytic enzymes from spent compost of four mushroom species

To evaluate the potential of using the enzymes from spent mushroom compost (SMC) as an industrial enzyme, the production of alpha-amylase, cellulase, beta-glucosidase, laccase, and xylanase was determined from the SMC of four edible mushroom species (Pleurotus ostreatus, Lentinula edodes, Flammulina velutipes and Hericium erinaceum). Among the tested SMC, the SMC of L. edodes showed the highest enzyme activity in alpha-amylase (229 nkat/g), cellulase (759 nkat/g) and beta-glucosidase (767 nkat/g) in 0.5% Triton X-100, and that of P. ostreatus showed the highest activity in laccase (1452 nkat/g) in phosphate-buffered 0.2% Triton X-100. The highest xylanase activity (119 nkat/g) was found in the SMC of F. velutipes.     

Synthesis of electroconductive polyaniline using immobilized laccase

A new method for synthesis of the conductive complex between polyaniline (PANI) and poly(2-acrylamido-2-methyl-1-propanosulfonic acid) (PAMPS) was proposed; in this method, the immobilized laccase from the basidiomycete Trametes hirsuta is used as a biocatalyst for aniline oxidative polymerization. The conditions for laccase immobilization on CM cellulose by bifunctional Woodward’s reagent were optimized. The catalytic properties of immobilized and native laccases were compared. The immobilized laccase appeared an efficient catalyst for the oxidative radical polymerization of aniline on polysulfonic acid matrix at 4°C. It was demonstrated that the immobilized enzyme could be repeatedly used for enzymatic synthesis of this polymer. Several spectral characteristics of the PANI/PAMPS complexes synthesized at various pH values were studied. The conductance of PANI specimens produced using immobilized laccase as a catalyst was 13 mS/cm.     

Enhanced activity by poly(ethylene glycol) modification of Coriolopsis gallica laccase

We are studying the enzymatic modification of polycyclic aromatic hydrocarbons (PAHs) by the laccase from Coriolopsis gallica UAMH 8260. The enzyme was produced during growth in a stirred tank reactor to 15 units ml⁻¹, among the highest levels described for a wild-type fungus; the enzyme was the major protein produced under these conditions. After purification, it exhibited characteristics typical of a white rot fungal laccase. Fifteen azo and phenolic compounds at 1 mM concentration were tested as mediators in the laccase oxidation of anthracene. Higher anthracene oxidation was obtained with the mediator combination of ABTS and HBT, showing a correlation between the oxidation rate and the mediator concentration. Reactions with substituted phenols and anilines, conventional laccase substrates, and PAHs were compared using the native laccase and enzyme preparations chemically modified with 5000 MW-poly(ethylene glycol). Chemically modified laccase oxidized a similar range of substituted phenols as the native enzyme but with a higher catalytic efficiency. The k _cat increase by the chemical modification may be as great as 1300 times for syringaldazine oxidation. No effect was found of chemical modification on mediated PAH oxidation. Both unmodified and PEG-modified laccases increased PAH oxidation up to 1000 times in the presence of radical mediators. Thus, a change of the protein surface improves the mediator oxidation efficiency, but does not affect non-enzymatic PAH oxidation by oxidized mediators. Received 10 December 2001/ Accepted in revised form 20 July 2002     

A green 2,4-pentadienoyl-CoA reductase from Clostridium aminovalericum

2,4-Pentadienoyl-CoA reductase from Clostridium aminovalericum was purified to homogeneity (170-182 kDa). PAGE in the presence of SDS revealed a single band (44 kDa) indicating a homotetrameric structure. The native enzyme had a green colour and contained 0.4 mol FAD/subunit. Its unusual ultraviolet/visible-spectrum showed absorption maxima at 270, 402 and 715 nm as well as shoulders at 278, 360, 450 and 500 nm. Removal of the prosthetic group at pH 2 in the presence of salt and charcoal yielded a colourless and completely inactive apoenzyme, which could be reconstituted with FAD (not with FMN) to an active holoenzyme showing a normal flavoprotein spectrum (peaks at 369 nm and 436 nm). Thereby the FAD content increased to 0.9 mol/subunit with a concomitant rise in activity to 200% of the original value. Anaerobic reduction of the green enzyme by dithionite and reoxidation by air afforded a green preparation with a spectrum similar to that of the native enzyme. Addition of excess FAD to the green reductase also increased the activity by a factor of two. The green enzyme catalysed the oxidation of (E)-3-pentenoyl-CoA or (E)-3-hexenoyl-CoA to 2,4-pentadienoyl-CoA or 2,4-hexenoyl-CoA, respectively. 2-Pentenoyl-CoA or 4-pentenoyl-CoA were not oxidised. Meldola blue (8-dimethylamino-2,3-benzophenoxazine) and 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyltetrazolium chloride (V = 26 nkat/mg protein) or ferricenium hexafluorophosphate (V = 1900 nkat/mg), but not NAD(P), served as electron acceptors. Reduction of 2,4-pentadienoyl-CoA (V = 370 nkat/mg) was observed with reduced benzyl viologen, but not with NAD(P)H as an electron donor. Although the enzyme had some pentenoyl-CoA delta-isomerase activity (1.2 nkat/mg), the only product of the reduction was 3-pentenoyl-CoA rather than 2-pentenoyl-CoA.     

Stimulation of ligninolytic enzyme production in Phanerochaete chrysosporium by polyoxyalkanes

AIMS: Poly(ethylene glycol) (PEG) and some substances similar to PEG in chemical structure were tested as stimulators of ligninolytic enzyme production in shaken culture of Phanerochaete chrysosporium. METHODS AND RESULTS: The substances that caused high enzymatic activity were linear polymers [poly(ethylene glycol), poly(propylene glycol), poly(butylene glycol) and poly(vinyl alcohol)] and cyclic polymers (crown ether). They can have terminal groups other than -OH [PEG (di)methyl ether, PEG sulphate, PEG derivative with the amino group and xanthate]. The maximum lignin peroxidase activities were compared with the surface pressure caused by the stimulator. Addition of polymers composed of charged monomer units did not increase the enzymatic activity and the fungi did not grow at all on addition of polymers having a fixed positive charge. CONCLUSIONS: Lignin peroxidase activity was increased after the addition of polymers with uncharged monomer units. It was higher and its maximum was reached in a shorter time on addition of polymers with higher molecular weights. SIGNIFICANCE AND IMPACT OF STUDY: Beside Tweens there are several polymers that stimulate ligninolytic enzyme production in shaken culture of P. chrysosporium. Their characteristics are: similarity to PEG in chemical structure, having uncharged monomer units and high molecular weight.     

Increased production of laccase by <Emphasis Type="Italic">Cerrena unicolor</Emphasis> in submerged liquid cultures

The wood-degrading basidiomycete Cerrena unicolor C-139 has been suggested as a potential producer of the industrially important enzyme laccase. Basic culture parameters influencing the enzyme synthesis in shaken-flask and aerated bioreactor cultures were evaluated to improve the yields of the process. Production of extracellular laccase was considerably enhanced by the addition of Cu²⁺ in the micromolar range to a carbon-sufficient and nitrogen-sufficient culture medium (C/N = 16.69). When an optimised medium containing glucose (10 g/L) and l-asparagine (1.5 g/L) was used, and enzyme synthesis was stimulated by addition of 10 μM Cu²⁺ to the culture medium on days 3, 6 and 9, maximal laccase productivity obtained after 17 days’ cultivation in shaken flask cultures was above 100,000 nkat/L. In fermenter fungal cultures, the influence of stabilisation of medium pH on laccase activity was additionally studied. The use of a bioreactor with an automatic pH control set at pH 6.5 after 48-h incubation resulted in the enzyme activity of 65,000 nkat/L after 8 days’ cultivation.     

Self-assembled micelles of biodegradable triblock copolymers based on poly(ethyl ethylene phosphate) and poly(-caprolactone) as drug carriers

A series of novel amphiphilic triblock copolymers of poly(ethyl ethylene phosphate) and poly(-caprolactone) (PEEP-PCL-PEEP) with various PEEP and PCL block lengths were synthesized and characterized. These triblock copolymers formed micelles composed of a hydrophobic core of poly(-caprolactone) (PCL) and a hydrophilic shell of poly(ethyl ethylene phosphate) (PEEP) in aqueous solution. The micelle morphology was spherical, determined by transmission electron microscopy. It was found that the size and critical micelle concentration values of the micelles depended on both hydrophobic PCL block length and PEEP hydrophilic block length. The in vitro degradation characteristics of the triblock copolymers were investigated in micellar form, showing that these copolymers were completely biodegradable under enzymatic catalysis of Pseudomonas lipase and phosphodiesterase I. These triblock copolymers were used for paclitaxel (PTX) encapsulation to demonstrate the potential in drug delivery. PTX was successfully loaded into the micelles, and the in vitro release profile was found to be correlative to the polymer composition. These biodegradable triblock copolymer micelles are potential as novel carriers for hydrophobic drug delivery.     

Enzyme action in polymer and salt solutions. I. Stability of penicillin acylase in poly(ethylene glycol) and potassium phosphate solutions in relation to water activity

The stability of penicillin acylase (penicillin aminohydrolase, EC 3.5.1.11) was studied in poly(ethylene glycol) and potassium phosphate solutions. Enzyme stability measured as the half-life of the enzymatic activity and the transition temperature determined by differential scanning calorimetry, correlated well. The enzyme stability could not be related to the water activity as a measure of solute-solvent interaction. It seems to be related more to the concentration of the solutes and much less to the molecular weight of poly(ethylene glycol). The stabilizing effect of poly(ethylene glycol) is also discussed in terms of poly(ethylene glycol)-protein interactions.     

Highly efficient production of laccase by the basidiomycete Pycnoporus cinnabarinus

An efficient transformation and expression system was developed for the industrially relevant basidiomycete Pycnoporus cinnabarinus. This was used to transform a laccase-deficient monokaryotic strain with the homologous lac1 laccase gene placed under the regulation of its own promoter or that of the SC3 hydrophobin gene or the glyceraldehyde-3-phosphate dehydrogenase (GPD) gene of Schizophyllum commune. SC3-driven expression resulted in a maximal laccase activity of 107 nkat ml(-1) in liquid shaken cultures. This value was about 1.4 and 1.6 times higher in the cases of the GPD and lac1 promoters, respectively. lac1-driven expression strongly increased when 25 g of ethanol liter(-1) was added to the medium. Accordingly, laccase activity increased to 1,223 nkat ml(-1). These findings agree with the fact that ethanol induces laccase gene expression in some fungi. Remarkably, lac1 mRNA accumulation and laccase activity also strongly increased in the presence of 25 g of ethanol liter(-1) when lac1 was expressed behind the SC3 or GPD promoter. In the latter case, a maximal laccase activity of 1,393 nkat ml(-1) (i.e., 360 mg liter(-1)) was obtained. Laccase production was further increased in transformants expressing lac1 behind its own promoter or that of GPD by growth in the presence of 40 g of ethanol liter(-1). In this case, maximal activities were 3,900 and 4,660 nkat ml(-1), respectively, corresponding to 1 and 1.2 g of laccase per liter and thus representing the highest laccase activities reported for recombinant fungal strains. These results suggest that P. cinnabarinus may be a host of choice for the production of other proteins as well.     

Chitosan nanogels by template chemical cross-linking in polyion complex micelle nanoreactors

Chitosan covalent nanogels cross-linked with genipin were prepared by template chemical cross-linking of chitosan in polyion complex micelle (PIC) nanoreactors. By using this method, we were able to prepare chitosan nanogels using only biocompatible materials without organic solvents. PIC were prepared by interaction between chitosan (X(n) = 23, 44, and 130) and block copolymer poly(ethylene oxide)-block-poly[sodium 2-(acrylamido)-2-methylpropanesulfonate] (PEO-b-PAMPS) synthesized by single-electron transfer-living radical polymerization (SET-LRP). PIC with small size (diameter about 50 nm) and low polydispersity were obtained up to 5 mg/mL. After cross-linking of chitosan with genipin, the nanoreactors were dissociated by adding NaCl. The dissociation of the nanoreactors and the formation of the nanogels were confirmed by (1)H NMR, DLS, and TEM. The size of the smallest nanogels was about 50 nm in the swollen state and 20 nm in the dry state. The amount of genipin used during reticulation was an important parameter to modulate the size of the nanogels in solution.     

Conformational studies of polymers and copolymers of L-aspartate esters. I. Preparation and solution studies

An alcoholysis method is described for the modification of high molecular weight poly(β-benzyl L -asparatate); by this method the benzyl groups in the polypeptide have been replaced by methyl, ethyl, isopropyl, n-propyl, and phenethyl groups to give a series of copolymers of each of the corresponding aspartate esters with benzyl L -aspartate. By repeating the reactions, replacement of better than 99% has been achieved in some cases to give in effect the homopolymer. Optical rotatory dispersion studies show that of all the systems studied only poly(β-methyl L -aspartate) has the left-handed helix sense, the others are right-handed. It is shown further that the helix sense is not an intrinsic property of the nature of the aspartate side chain. Raising the temperature of chloroform solutions of the right-handed form of the copolymers of benzyl L -aspartate and ethyl L -aspartate results in a transition to the left-handed helix, the temperature of the transition being dependent on the composition of the copolymer. Also poly(β-n-propyl L -aspartate) undergoes a transition from the right- to the left-handed helix form at 59°C. These results suggest a general pattern of behavior of poly(aspartate esters) and that with suitable conditions of solvent and temperature they may be in either the right- or left-handed helical form.     

Preparative synthesis of GDP-beta-L-fucose by recombinant enzymes from enterobacterial sources

The 6-deoxyhexose L-fucose is an important and characteristic element in glycoconjugates of bacteria (e.g., lipopolysaccharides), plants (e.g., xyloglucans) and animals (e.g., glycolipids, glycoproteins, and oligosaccharides). The biosynthetic pathway of GDP-L-fucose starts with a dehydration of GDP-D-mannose catalyzed by GDP-D-mannose 4,6-dehydratase (Gmd) creating GDP-4-keto-6-deoxymannose which is subsequently converted by the GDP-4-keto-6-deoxy-D-mannose 3,5-epimerase-4-reductase (WcaG; GDP-beta-L-fucose synthetase) to GDP-beta-L-fucose. Both biosynthetic genes gmd and wcaG were cloned from Escherichia coli K12 and the enzymes overexpressed under control of the T7 promoter in the expression vectors pET11a and pET16b, yielding both native and N-terminal His-tag fusion proteins, respectively. The activities of the Gmd and WcaG were analyzed. The enzymatic conversion from GDP-D-mannose to GDP-beta-L-fucose was optimized and the final product was purified. The formation of GDP-beta-L-fucose by the recombinant enzymes was verified by HPLC and NMR analyses. The His-tag fusion variants of the Gmd and WcaG proteins were purified to near homogeneity. The His-tag Gmd recombinant enzyme was inactive, whereas His-tag WcaG showed very similar enzymatic properties relative to the native GDP-beta-L-fucose synthetase. With the purified His-tag WcaG Km and Vmax values, respectively, of 40 microM and 23 nkat/mg protein for the substrate GDP-4-keto-6-deoxy-D-mannose and of 21 microM and 10 nkat/mg protein for the cosubstrate NADPH were obtained; a pH optimum of 7.5 was determined and the enzyme was stimulated to equal extend by the divalent cations Mg2+ and Ca2+. The Gmd enzyme showed a strong feedback inhibition by GDP-beta-L-fucose.     

Synthesis and biopharmaceutical characterisation of new poly(hydroxyethylaspartamide) copolymers as drug carriers.

Four new poly(hydroxyethylaspartamide)-based copolymers bearing (a) poly(ethylene glycol) 2000, (b) poly(ethylene glycol) 5000, (c) poly(ethylene glycol) 2000 and hexadecylalkyl, (d) poly(ethylene glycol) 5000 and hexadecylalkyle, as pendant groups were synthesised. The copolymers were obtained by partial aminolysis of polysuccinimide with poly(ethylene glycol) and hexadecylalkyl amino derivatives followed by reaction with ethanolamine. Naked polyhydroxyaspartamide was obtained by polysuccinimide reaction with ethanolamine. The nuclear magnetic resonance, infrared, light scattering and elemental analysis allowed for the extensive physico-chemical characterisation of the carriers. The molecular mass of all the polymers was in the range of 27000-34000 Da, and the polydispersivity was in the range of 1.5-1.7. By intravenous injection to mice bearing a solid tumour, all the polymeric carriers displayed a bi-compartmental pharmacokinetic behaviour. Both the poly(ethylene glycol) and the hexadecylalkyle conjugation prolonged and enhanced the distribution phase of poly(hydroxyethylaspartamide). The poly(ethylene glycol) conjugation was found to promote the carrier elimination by kidney ultrafiltration and to prevent partially the accumulation in the spleen and in the liver. The poly(ethylene glycol)/hexadecylalkyle conjugates localised preferentially in the liver were over 30% of the dose/g of tissue was determined after 144 h from administration. In the tumour all the polymers displayed a relevant accumulation that significantly increased throughout the time to reach high concentrations after 24 h. In particular, the poly(ethylene glycol)/hexadecylalkyle conjugates achieved a concentration of 15-25% of the dose/g of tissue after 24 h from administration that was maintained up to 144 h.     

Immunological properties of uricase conjugated to neutral soluble polymers.

For a comparative study of immunological properties of protein-polymer conjugates, uricase was modified with (a) poly(N-vinylpyrrolidone) 6000 Da, (b) poly(N-acriloylmorpholine) 6000 Da, (c) branched monomethoxypoly(ethylene glycol) 10000 Da, and (d) linear monomethoxypoly(ethylene glycol) 5000 Da. Spectroscopic studies performed by UV, fluorescence, and circular dichroism did not show any relevant difference in protein conformation among the native and the conjugates. Immunological studies showed that both uricase antigenicity and immunogenicity were altered by polymer conjugation to an extent that depended upon the polymer composition; in particular, monomethoxypoly(ethylene glycol) 10000 Da remarkably reduced the protein antigenicity, while unexpectedly, the poly(N-vinylpyrrolidone) derivative presented higher antigenicity than the native protein. In Balb/c mice, the native protein elicited a rapid and intense immunoresponse whereas all the conjugates induced a lower production of anti-native uricase antibodies. The rank order of immunogenicity was native uricase > uricase-poly(N-vinylpyrrolidone) > or = uricase-poly(N-acriloylmorpholine) > uricase-monomethoxypoly(ethylene glycol) 5000 Da > uricase-monomethoxypoly(ethylene glycol) 10000 Da. The four conjugates also induced anti polymer immunoresponse. Anti poly(N-vinylpyrrolidone) and anti poly(N-acriloylmorpholine) antibodies were generated from the first immunization while low levels of anti polymer antibodies were found with both poly(ethylene glycol) conjugates only after the second immunization.     

Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations

New high-molecular-weight hydrophobic/hydrophilic segmented copolymers of poly(ester ether carbonate) structure, containing poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) segments in their main chain, were synthesized and characterized. These copolymers were obtained by a two-step chain-extension reaction carried out in the presence of alpha,omega-dihydroxy-oligoPCL of molecular weight 1250 and PEG samples of molecular weight 150, 400, 600, 1000, and 2000. The molecular structures of all synthesized materials were characterized by means of (1)H NMR and (13)C NMR spectroscopy, their molecular weights were determined by means of size exclusion chromatography, and their thermal properties were obtained by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The poly(ester ether carbonate)s of this study are partly or totally miscible at least up to 50 wt % with poly(vinyl chloride) (PVC) and could be used to produce flexible PVC formulations. The miscibility between PVC and the poly(ester ether carbonate)s reported in this paper was investigated by means of DSC and DMA analysis. PVC blends were also analyzed by determining their swellability and the amount of extractables in aqueous media. By comparison purposes, the chain-extension product of PCL1250, that is, PCL polycarbonate, was also synthesized and characterized. The results obtained demonstrated that the copolymers with shortest PEG segment length, i.e. PEG150, 400, and 600, give the best results in terms of miscibility with PVC and lead to blends with maximum resistance to extraction by water. Therefore, they represent, in principle, good substitutes for low-molecular-weight, leachable PVC plasticizers, such as di(ethylhexyl) phthalate.     

Coloured and low conductive fabrics by in situ laccase-catalysed polymerization

Coloured and conductive fabrics were obtained through “in situ” laccase polymerization of catechol and p-phenylenediamine under high-pressure homogenization. Both monomers, catechol and p-phenylenediamine, were polymerized by different laccase forms, namely native, PEGylated and Epoxy-PEGylated. All the catalysts were placed inside a textile fabric bag which served simultaneously as enzyme support and as substrate for coating with the newly produced polymers. The PEGylated laccase forms gave rise to a higher amount of oligomers/polymers and higher colouration level of polyethylene terephthalate (PET), cotton and wool fabrics compared to native laccase. Both functional polymers were able to confer conductivity to the substrates however in a different extent. Fabrics coated with poly(p-phenylenediamine) present higher conductivity, rather due to its polymerized structure than to the amount of polymer produced by enzyme catalysis. Herein a green approach was presented to produce polyphenols with increased fixation onto different textile substrates. These substrates reach high levels of colouration and good fastness behaviour after washing.     

Enzymatic removal of plant residues from wool: Application of experimental design techniques for optimization parameters

This study was undertaken to find the optimum conditions of a new enzymatic process to remove plant residues from wool. Commercial enzymatic preparations of Celluclast 1.5 L and Pectinex Ultra SP-L were selected in order to hydrolyze the polysaccharides in primary plant cell walls and middle lamella, resulting into more fragile residues easier to be removed. Since it was intended to define the optimal conditions for enzyme application, a four-factor central composite design was selected to study the effects of pH, temperature, enzyme concentration and wetting agent concentration, on the two selected responses, i.e., soluble reducing sugars (RS) and alkali solubility (AS) of wool to detect plant degradation and to evaluate wool quality, respectively. Results demonstrated that enzyme concentration was the most significant effect in plant residues degradation. A total enzyme concentration loading of 20 mL of both diluted enzymatic preparations in equal parts per 1 L of incubation solution (42.970 U/L of Celluclast preparation and PG 29.3 nkat/L + PME 2.537 nkat/L of Pectinex preparation), yielded an equivalent amount of 240.127 mg of glucose per 1.0 g of plant residue, at the optimal conditions: 40.56 °C, pH 4.0 and 1 mL Plurafac/L. SEM analysis has indicated an identical and important degradation of the plant residues, when compared to the conventional carbonization process, and wool quality has been preserved.     

Synthesis of biocompatible PEG-Based star polymers with cationic and degradable core for siRNA delivery

Star polymers with poly(ethylene glycol) (PEG) arms and a degradable cationic core were synthesized by the atom transfer radical copolymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate macromonomer (PEGMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), and a disulfide dimethacrylate (cross-linker, SS) via an "arm-first" approach. The star polymers had a diameter ~15 nm and were degraded under redox conditions by glutathione treatment into individual polymeric chains due to cleavage of the disulfide cross-linker, as confirmed by dynamic light scattering. The star polymers were cultured with mouse calvarial preosteoblast-like cells, embryonic day 1, subclone 4 (MC3T3-E1.4) to determine biocompatibility. Data suggest star polymers were biocompatible, with ≥ 80% cell viability after 48 h of incubation even at high concentration (800 μg/mL). Zeta potential values varied with N/P ratio confirming complexation with siRNA. Successful cellular uptake of the star polymers in MC3T3-E1.4 cells was observed by confocal microscopy and flow cytometry after 24 h of incubation.     

Soybean hull peroxidase immobilization on macroporous glycidyl methacrylates with different surface characteristics

Soybean hull peroxidase (SHP, E.C. 1.11.1.7) was immobilized by a glutaraldehyde and periodate method onto series of macroporous copolymers of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA), poly(GMA-co-EGDMA) with various surface characteristics and pore size diameters ranging from 44 to 200 nm. Glutaraldehyde immobilization method and poly(GMA-co-EGDMA) named SGE 20/12 with pore sizes of 120 nm gave immobilized enzyme with highest specific activity of 25 U/g. Deactivation studies showed that immobilization increased stability of SHP and that surface characteristics of the used copolymer had a major influence on a stability of immobilized enzyme at high temperatures and in an organic solvent. The highest thermostability was obtained using the copolymer SGE 20/12 with pore size of 120 nm, while the highest stability in dioxane had SHP immobilized onto copolymer SGE 10/4 with pore size of 44 nm. Immobilized SHP showed a wider pH optimum as compared to the native enzyme especially at alkaline pH values and 3.2 times increased K _m value for pyrogallol. After 6 cycles of repeated use in batch reactor, immobilized SHP retained 25 % of its original activity. Macroporous copolymers with different surface characteristics can be used for fine tuning of activity and stability of immobilized SHP to obtain a biocatalyst suitable for phenol oxidation or polymer synthesis in organic solvents.     

Enzymatic catalysis in microemulsions: enzyme reuse and product recovery

A technique for enzyme reuse and product recovery from enzymatic catalysis in microemulsions is demonstrated. The enzymatic reaction is performed in a homogeneous isotropic microemulsion; AOT (sodium bis-(2-ethyl- hexyl)sulfosuccinate)/isooctane/buffer or C(12)E(5)(penta ethylene glycol dodecyl ether)/heptane/buffer. By small temperature changes the systems are shifted to two phase regions, where an oil-rich phase, containing the product, coexists with a water-rich phase containing surfactant and enzyme. The oil-rich phase may be replaced by an oil solution containing new substrate. Thus, the reaction may be continued and the enzyme reused. This procedure was repeated nine times in the present study. Data on phase behavior in presence and in absence of protein, partitioning of the components and a radioactive-labelled protein between the phases, and the repeated use of horse liver alcohol dehydrogenase (HLADH) in the microemulsions are presented.