Isomerization and biodegradation of beta-cypermethrin by Pseudomonas aeruginosa CH7 with biosurfactant production

Pseudomonas aeruginosa CH7, isolated from activated sludge, was able not only to isomerize and degrade beta-cypermethrin but also to utilize it as the sole source of carbon and energy for growth and produce biosurfactant. The strain effectively degraded beta-cypermethrin with inocula biomass of 0.1-0.2 g L⁻¹ at 25-35 °C, pH 6-9, and a final concentration of beta-cypermethrin 25-900 mg L⁻¹. Via response surface methodology analysis, we found the optimal condition was 29.4 °C, pH 7.0, and inocula biomass of 0.15 g L⁻¹; under these conditions, about 90% of the beta-cypermethrin could be degraded within 12 days. Noticeably, biosurfactant was detected in the MSM culture of strain CH7, suggesting that the biosurfactant (rhamnolipid) could potentially enhance the degradation of beta-cypermethrin by promoting the dissolution, adsorption, and absorption of the hydrophobic compounds. Therefore, CH7 may serve as a promising strain in the bioremediation of wastewater and soil polluted by beta-cypermethrin.     

Influence of ammonium sulphate feeding time on fed-batch Arthrospira (Spirulina) platensis cultivation and biomass composition with and without pH control

Previous work demonstrated that a mixture of NH₄Cl and KNO₃ as nitrogen source was beneficial to fed-batch Arthrospira (Spirulina) platensis cultivation, in terms of either lower costs or higher cell concentration. On the basis of those results, this study focused on the use of a cheaper nitrogen source mixture, namely (NH₄)₂SO₄ plus NaNO₃, varying the ammonium feeding time (T = 7-15 days), either controlling the pH by CO₂ addition or not. A. platensis was cultivated in mini-tanks at 30 °C, 156 μmol photons m⁻² s⁻¹, and starting cell concentration of 400 mg L⁻¹, on a modified Schlösser medium. T = 13 days under pH control were selected as optimum conditions, ensuring the best results in terms of biomass production (maximum cell concentration of 2911 mg L⁻¹, cell productivity of 179 mg L⁻¹ d⁻¹ and specific growth rate of 0.77 d⁻¹) and satisfactory protein and lipid contents (around 30% each).     

Ecology of aquatic Ranunculus communities under the Mediterranean climate

The Iberian Peninsula encompasses more than 80% of the species richness of European aquatic ranunculi. The floristic diversity of the phytocoenosis characterised by aquatic Ranunculus and the main physical–chemical factors of the water were studied in 43 localities of the central Iberian Peninsula. Four aquatic Ranunculus communities are found in most of the aquatic environments. These are species-poor and have an uneven distribution: three species of Batrachium are heterophyllous and their communities are distributed in different aquatic ecosystems on silicated substrates; one species is homophyllous and its community occurs in various aquatic ecosystems with carbonated waters. In the Mediterranean climate, Ranunculus species are present in different habitats, as shown by the results of all the statistical analyses. Ranunculus trichophyllus communities occur in base-rich waters with a high buffering capacity (2273.44 ± 794.57 mg CaCO₃ L⁻¹) and a high concentration of cations (Ca²⁺, 121 ± 33.12 mg L⁻¹; Mg²⁺, 71.64 ± 82.77 mg L⁻¹), nitrates (2.89 ± 4.80 mg L⁻¹), ammonium (2.19 ± 1.36 mg L⁻¹) and sulphates (216.25 ± 218.54 mg L⁻¹). Ranunculus penicillatus communities are found in flowing waters with a high concentration of phosphates (0.48 ± 0.6 mg L⁻¹) and intermediate buffering capacity (683.66 ± 446.76 mg CaCO₃ L⁻¹). Both Ranunculus pseudofluitans and Ranunculus peltatus communities grow in waters with low buffering capacity (R. pseudofluitans, 385.91 ± 209.2 mg CaCO₃ L⁻¹; R. peltatus, 263.3 ± 180.36 mg CaCO₃ L⁻¹), and a low concentration of cations (R. pseudofluitans: Ca²⁺, 12.57 ± 9.42 mg L⁻¹; Mg²⁺, 3.42 ± 1.67 mg L⁻¹; R. peltatus: Ca²⁺, 15 ± 18.26 mg L⁻¹; Mg²⁺, 6.26 ± 8.89 mg L⁻¹) and nutrients (R. pseudofluitans: nitrates, 0.23 ± 0.2 mg L⁻¹; phosphates, 0.09 ± 0.1 mg L⁻¹; R. peltatus: nitrates, 0.19 ± 0.21 mg L⁻¹; phosphates, 0.09 ± 0.12 mg L⁻¹); the first in flowing waters, the latter in still waters.     

Isolation and characterization of a fungus able to degrade pyrethroids and 3-phenoxybenzaldehyde

Fungal strain HU, isolated from activated sludge and identified as a member of the genus Cladosporium based on morphology and sequencing of 28S rRNA, was shown to degrade 90% of fenvalerate, fenpropathrin, β-cypermethrin, deltamethrin, bifenthrin, and permethrin (100 mg L⁻¹) within 5 days. Fenvalerate was utilized as sole carbon and energy source and co-metabolized in the presence of sucrose. Degradation of fenvalerate occurred at pH 5-10 at 18-38 °C. The fungus first hydrolyzed the carboxylester linkage to produce α-hydroxy-3-phenoxy-benzeneacetonitrile and 3-phenoxybenzaldehyde, and subsequently degraded these two compounds with a q_max, K_s and K_i of 1.73 d⁻¹, 99.20 mg L⁻¹ and 449.75 mg L⁻¹, respectively. Degradation followed first-order kinetics. These results show that the fungal strain may possess potential to be used in bioremediation of pyrethroid-contaminated environments.     

Microbial treatment of high-strength perchlorate wastewater

To treat wastewater containing high concentrations of perchlorate, a perchlorate reducing-bacterial consortium was obtained by enrichment culture grown on high-strength perchlorate (1200 mg L⁻¹) feed medium, and was characterized in a sequence batch reactor (SBR) over a long-time operation. The consortium removed perchlorate in the SBR with high reduction rates (35-90 mg L⁻¹ h⁻¹) and stable removal efficiency over 200-day operations. The maximum specific perchlorate reduction rate (q_max), half saturation constant (K_s), and optimal pH range were 0.67 mg-perchlorate mg-dry cell weight⁻¹ h⁻¹, 193.8 mg-perchlorate L⁻¹, and pH 7-9, respectively. The perchlorate reduction yield was 0.48 mol-perchlorate mol-acetate⁻¹. A clone library prepared using the amplicons of cld gene encoding chlorate dismutase showed that the dominant (per)chlorate reducing bacteria in the consortium were Dechlorosoma sp. (53%), Ideonella sp. (28%), and Dechloromonas sp. (19%).     

Ecofriendly degradation of sulfonated diazo dye C.I. Reactive Green 19A using Micrococcus glutamicus NCIM-2168

Micrococcus glutamicus NCIM-2168 exhibited complete decolorization and degradation of C.I. Reactive Green 19A (an initial concentration of 50 mg l⁻¹) within 42 h at temperature 37 °C and pH 8, under static condition. Extent of mineralization was determined with total organic carbon (TOC) and chemical oxygen demand (COD) measurement, showing a satisfactory reduction of TOC (72%) and COD (66%) within 42 h. Enzyme studies shows involvement of oxidoreductive enzymes in decolorization/degradation process. Analytical studies of the extracted metabolites confirmed the significant degradation of Reactive Green 19A into various metabolites. The microbial toxicity and phytotoxicity assay revealed that the degradation of Reactive Green 19A produced nontoxic metabolites. In addition, the M. glutamicus strain was applied to decolorize a mixture of ten reactive dyes showing a 63% decolorization (in terms of decrease in ADMI value) within 72 h, along with 48% and 42% reduction in TOC and COD under static condition.     

Biodegradation of phenanthrene and pyrene by Ganoderma lucidum

Biodegradation of two polycyclic aromatic hydrocarbons (PAHs), phenanthrene and pyrene, by a white rot fungus, Ganoderma lucidum, in broth cultures was investigated. It was found that the biomass of the organism decreased with the increase of PAH concentration in the cultures. In the cultures with 2 to 50 mg l⁻¹ PAHs, the degradation rate constants (k₁) increased with the PAH concentration, whereas, at the level of 100 mg l⁻¹, the degradation rate constants decreased. In the presence of 20 mg l⁻¹ PAHs, the highest degradation rates of both PAHs occurred in cultures with an initial pH of 4.0 at 30 °C. The addition of CuSO₄, citric acid, gallic acid, tartaric acid, veratryl alcohol, guaiacol, 2,2′-azino-bis-(3- ethylbenzothazoline-6-sulfonate) (ABTS) enhanced the degradation of both PAHs and laccase activities; whereas the supplement of oxalate, di-n-butyl phthalate (DBP), and nonylphenol (NP) decreased the degradation of both PAHs and inhibited laccase production. In conclusion, G. lucidum is a promising white rot fungus to degrade PAHs such as phenanthrene and pyrene in the environment.     

A batch decolorization and kinetic study of Reactive Black 5 by a bacterial strain Enterobacter sp. GY-1

An Enterobacter strain (GY-1) with high activity of decolorization of Reactive Black 5 (RB 5) was isolated from textile wastewater treating sludge. The kinetic characteristics of dye decolorization by the strain GY-1 were determined quantitatively using the diazo dye, RB 5. Effects of different operation parameters (inoculum size, pH, temperature and salinity) and various electron donors on decolorization of the azo dye by GY-1 were systematically investigated to reveal the primary factors that determine the performance of the azo dye decolorization. The decolorization of RB 5 was attributed to extracellular enzymes. A kinetic model was established giving the dependence of decolorization rate on cell mass concentration (first order). Decolorization rate increased with increasing temperature from 20 to 35 °C, which can be predicted by Arrhenius equation with the activation energy (E_a) of 8.50 kcal mol⁻¹ and the frequency factor (A₀) of 6.28 × 10⁷ mg l g MLSS⁻¹ h⁻¹. Michaelis-Menten kinetics and Eadie-Hofstee plot were used to determine V_max, 1.05 mg l⁻¹ h⁻¹ and K_m, 24.06 mg l⁻¹.     

Evaluation of selenite bioremoval from liquid culture by Enterococcus species

The genus Enterococcus belong to the genera of bacteria that produce lactic acid and can confer health benefits to living organisms. Selenium (Se) is an essential micronutrient for humans and animals. Thirty-six Enterococcus species isolated from dairy products were screened for Se(IV) sorption capacity for use as a probiotics in animal nutrition. Several isolates grew luxuriantly and significantly removed Se(IV) from Se(IV) amended medium. Two isolates, LAB 14 and LAB 18, identified by 16S rRNA gene sequence analysis as Enterococcus faecalis (98% nucleotide sequence similarity) and Enterococcus faecium (97% nucleotide sequence similarity), respectively, were selected for further studies. The two isolates grew optimally and removed selenium at initial pH 7.0. Optimum removal of Se(IV) from the medium was recorded at 25 °C. Time course studies showed that after 8 h of incubation LAB 14 and LAB 18 cultures displayed the highest biomass production and Se(IV) bioremoval and most selenite in culture depleted in 24 h. At initial concentrations of 10 mg L⁻¹ and 60 mg L⁻¹, E. faecium (LAB 18) removed 9.91 mg L⁻¹ and 59.70 mg L⁻¹, respectively after 24 h. Similar Se(IV) bioremoval capacity was recorded with E. faecalis (LAB 14). Substantial amount of Se was detected in biomass of E. faecium (0.4599 mg g⁻¹ of dry weight) and E. faecalis (0.4759 mg g⁻¹ of dry weight). The significant uptake and transformation of Se(IV) by the Enterococcus species observed in this study suggest that they can be used to deliver dietary Se through feed augmentation with Se(IV)-enriched Enterococcus biomass.     

Impacts of chlorination and heat shocks on growth, pigments and photosynthesis of Phaeodactylum tricornutum (Bacillariophyceae)

The main impacts of cooling water from thermal (nuclear) power plants on aquatic organisms were caused by chlorination and temperature increase. In this study, we investigated the impacts of residual chlorine and short-term heat shocks on growth, pigment contents and photosynthesis of Phaeodactylum tricornutum. Growth of P. tricornutum was completely inhibited; Chlorophyll a and carotenoids contents deceased about 63.3% and 61.4% in 24 h treated with 0.2 mg L^− 1 chlorine. The negative effects of chlorination increased with enhanced concentration and prolonged exposure time. Relative electrode transfer rate (rETR) of P. tricornutum was significantly suppressed when treated with 0.2 mg L^− 1 residual chlorine for 24 h. Furthermore, the effective quantum yield (F_v'/F_m') decreased first but then recovered with prolonged exposure when residual chlorine ranged between 0.1 and 0.2 mg L^− 1. The cells were less sensitive to heat shocks compared with chlorination: the rETR and F_v'/F_m' was suppressed only when the temperature exceeded 35 °C for 1 h. When P. tricornutum was exposed to chlorination combined with heat shocks, the rETR was further inhibited at 35 °C. It indicated that both chlorination and heat shocks had negative impacts on the primary producers living in discharging coastal waters; furthermore, there were synergistic effects of heat shocks on chlorination toxicity.     

Aerobic debromination of deca-BDE: Isolation and characterization of an indigenous isolate from a PBDE contaminated sediment

The environmental safety of decabromodiphenyl ether (deca-BDE) has been the topic of controversial discussions during the recent years. Reductive debromination of deca-BDE in the environment was proved to be a significant source of lower-brominated Polybrominated diphenyl ethers (PBDEs) to the ecosystem. Currently, very little is known about the susceptibility of deca-BDE to aerobic biotransformation. Lysinibacillus fusiformis strain DB-1, an aerobic bacterium capable of debromination of deca-BDE, was isolated from sediments of LianjiangRiver, Guiyu in Guangdong of China. DB-1 can efficiently transform deca-BDE to lower brominated BDEs using carbon sources such as lactate, pyruvate and acetate, respectively. In liquid cultures, free bromide concentration accumulated to 1220 ??g L⁻¹ with 6 mg L⁻¹ of the nominal initial concentration of deca-BDE after 72 h aerobic incubation. The resting cell activity tests showed that debromination of deca-BDE by DB-1 was an aerobic process. This is the first report for biotransformation of deca-BDE by an indigenous bacterium isolated from PBDEs contaminated environment.     

Autotrophic denitrification using hydrogen generated from metallic iron corrosion

Hydrogenotrophic denitrification was demonstrated using hydrogen generated from anoxic corrosion of metallic iron. For this purpose, a mixture of hydrogenated water and nitrate solution was used as reactor feed. A semi-batch reactor with nitrate loading of 2000 mg m⁻³ d⁻¹ and hydraulic retention time (HRT) of 50 days produced effluent with nitrate concentration of 0.27 mg N L⁻¹ (99% nitrate removal). A continuous flow reactor with nitrate loading of 28.9 mg m⁻³ d⁻¹ and HRT of 15.6 days produced effluent with nitrate concentration of ∼0.025 mg N L⁻¹ (95% nitrate removal). In both cases, the concentration of nitrate degradation by-products, viz., ammonia and nitrite, were below detection limits. The rate of denitrification in the reactors was controlled by hydrogen availability, and hence to operate such reactors at higher nitrate loading rates and/or lower HRT than reported in the present study, hydrogen concentration in the hydrogenated water must be significantly increased.     

Accumulation of lead by free and immobilized cyanobacteria with special reference to accumulation factor and recovery

Lead accumulation by free and immobilized cyanobacteria, Lyngbya majuscula and Spirulina subsalsa was studied. Exponentially growing biomass was exposed to 1-20 mg L⁻¹ of Pb(II) solution at pH 6, 7 and 8 for time periods ranging from 10 min to 48 h. L. majuscula accumulated 10 times more Pb (13.5 mg g⁻¹) than S. subsalsa (1.32 mg g⁻¹) at pH 6 within 3 h of exposure to 20 mg L⁻¹ Pb(II) solution and 76% of the Pb could be recovered using 0.1 M EDTA. This chelator (2 μM) did not influence Pb accumulation whereas 100 μM citrate increased that of S. subsalsa 6- to 8-fold. L. majuscula filaments enmeshed in a glass wool packed in a column removed 95.8% of the Pb from a 5 mg L⁻¹ Pb solution compared to free and dead biomass which removed 64 and 33.6% Pb respectively. A 92.5% recovery of accumulated Pb from the immobilized biomass suggests that repeated absorption-desorption is possible.     

Effects of eutrophic water flooding on nitrate concentrations in mine wastes

Salt marshes near urban, industrial and mining areas are often affected both by heavy metals and by eutrophic water. The aim of this study was to assess and evaluate the main processes involved in the decrease of nitrate concentration in pore water of mine wastes flooded with eutrophic water, considering the presence or absence of plant rhizhosphere. Basic (pH ∼ 7.8) carbonated loam mine wastes and free-carbonated acidic (pH ∼ 6.2) sandy-loam mine wastes were collected from polluted coastal salt marshes of SE Spain which regularly receive nutrient-enriched water. The wastes were put in pots and flooded for 15 weeks with eutrophic water (dissolved organic carbon ∼26 mg L⁻¹, PO₄³⁻ ∼23 mg L⁻¹, NO₃⁻ ∼180 mg L⁻¹). Three treatments were assayed for each type of waste: pots with Sarcocornia fruticosa, pots with Phragmites australis and unvegetated pots. Soluble organic carbon, nitrate, soluble Cd, Pb and Zn, pH and Eh were monitored. But the 2nd day of flooding, nitrate concentrations had decreased between 70% and 90% (equivalent to 1.01-1.12 g N-NO₃⁻ m⁻² day⁻¹) with respect to the content in the water used for flooding, except in unvegetated pots with acidic wastes. Denitrification was the main mechanism associated with the removal of nitrate. The role of vegetation in improving the rhizospheric environment was relevant in the acidic wastes because higher sand content, lower pH and higher soluble metal concentrations might strongly hinder microbial activity Hence, revegetation of salt marshes polluted by acidic sandy mining wastes might improve the capacity of this type of environment to act as a green filter against excessive nitrate contents flowing through them.     

Vertical tubular photobioreactor for semicontinuous culture of Cyanobium sp

We evaluated the kinetic culture characteristics of the microalgae Cyanobium sp. grown in vertical tubular photobioreactor in semicontinuous mode. Cultivation was carried out in vertical tubular photobioreactor for 2 L, in 57 d, at 30 °C, 3200 Lux, and 12 h light/dark photoperiod. The maximum specific growth rate was found as 0.127 d⁻¹, when the culture had blend concentration of 1.0 g L⁻¹, renewal rate of 50%, and sodium bicarbonate concentration of 1.0 g L⁻¹. The maximum values of productivity (0.071 g L⁻¹ d⁻¹) and number of cycles (10) were observed in blend concentration of 1.0 g L⁻¹, renewal rate of 30%, and bicarbonate concentration of 1.0 g L⁻¹. The results showed the potential of semicontinuous cultivation of Cyanobium sp. in closed tubular bioreactor, combining factors such as blend concentration, renewal rate, and sodium bicarbonate concentration.     

Biosorption of Acid Black 172 and Congo Red from aqueous solution by nonviable Penicillium YW 01: Kinetic study, equilibrium isotherm and artificial neural network modeling

The main objective of this work was to investigate the biosorption performance of nonviable Penicillium YW 01 biomass for removal of Acid Black 172 metal-complex dye (AB) and Congo Red (CR) in solutions. Maximum biosorption capacities of 225.38 and 411.53 mg g⁻¹ under initial dye concentration of 800 mg L⁻¹, pH 3.0 and 40 °C conditions were observed for AB and CR, respectively. Biosorption data were successfully described with Langmuir isotherm and the pseudo-second-order kinetic model. The Weber-Morris model analysis indicated that intraparticle diffusion was the limiting step for biosorption of AB and CR onto biosorbent. Analysis based on the artificial neural network and genetic algorithms hybrid model indicated that initial dye concentration and temperature appeared to be the most influential parameters for biosorption process of AB and CR onto biosorbent, respectively. Characterization of the biosorbent and possible dye-biosorbent interaction were confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy.     

Phenol removal from hypersaline wastewaters in a Membrane Biological Reactor (MBR): operation and microbiological characterisation

In this study, two Membrane Biological Reactors (MBR) with submerged flat membranes, one at lab-scale conditions and the other at pilot-plant conditions, were operated at environmental temperature to treat an industrial wastewater characterised by low phenol concentrations (8-16 mg L⁻¹) and high salinity (∼150-160 mS cm⁻¹). During the operation of both reactors, the phenol loading rate was progressively increased and less than 1 mg phenol L⁻¹ was detected even at very low HRTs (0.5-0.7 days). Membrane fouling was minimized by the cross flow aeration rate inside the MBRs and by intermittent permeation. Microbial community analysis of both reactors revealed that members of the genera Halomonas and Marinobacter (gammaproteobacteria) were major components. Growth-linked phenol degradation by pure cultures of Marinobacter isolates demonstrated that this bacterium played a major role in the removal of phenol from the bioreactors.     

Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500

The acid biocoagulants produced from non-sterile lactic acid fermentation by Lactobacillus casei TISTR 1500 were used to settle colloidal protein, mainly casein, at the isoelectric point in dairy effluent prior to secondary treatment. High concentration of azo dye (Ponceau 4R) in the dairy wastewater and the stress of starvation decreased the efficiencies of the micro-aerobic SBR. Consequently, low casein recovery obtained and organic removal suffered a decline. The number of lactic acid bacteria (LAB) also declined from log 7.4 to log 5.30 in the system fed with 400 mg L⁻¹ of the dye containing wastewater. The recovery of the system, however, showed that 25,000 mg COD L⁻¹ influent with 200 mg L⁻¹ of the dye maintained the growth of LAB in the range of log 7.74–8.12, with lactic and acetic production (2597 and 197 mg L⁻¹) and 83% protein removal. The results in this study suggested that the inhibitory effects were compensated with high organic content feeding.     

Bioconversion of crude glycerol to glycolipids in Ustilago maydis

Ustilago maydis is known to produce glycolipid-type biosurfactants. Here, we show that U. maydis is able to efficiently convert biodiesel-derived crude glycerol to glycolipids. We have optimized the medium composition and environmental factors for bioconversion of crude glycerol to glycolipids. The synthetic medium (MinCG) contains 50 g L⁻¹ crude glycerol and 20.3 mg L⁻¹ ammonium citrate as the carbon and nitrogen sources, respectively. The supplementation of trace amount of amino acids, Group-B vitamins and precursors of glycolipids, mannose and erythritol, also improved the final yield. At pH 4.0 and 30 °C, 32.1 g L⁻¹ total glycolipids was produced in a 8.2-day fed-batch bioprocess. Methanol at 2% or above severely inhibited cell growth and production of glycolipids. Our results suggest that U. maydis is an excellent host for the bioconversion of crude glycerol to value-added products.     

Ethanol degradation and the benefits of incremental priming in pilot-scale constructed wetlands

There has been significant global growth in the use of constructed wetlands for wastewater treatment. The fundamental microbial processes involved in the biodegradation of organic wastewater pollutants determine the range of design and operational parameters relevant to individual constructed wetlands. In this study, the biodegradation and mineralization of ethanol by acclimated and non-acclimated microbial populations in pilot-scale constructed wetlands were compared. By increasing the pollutant concentration at incremental intervals (incremental priming), the biodegradative capacity of a sand-filled constructed wetland was significantly enhanced. At an influent COD concentration of 15,800 mg L⁻¹, no volatile fatty acids were detected in the effluent of an incrementally primed system and the maximum effluent COD concentration was 180 mg L⁻¹. In contrast, an identical, unprimed system, amended with a lower concentration of COD (7587 mg L⁻¹), exhibited a maximum effluent COD concentration of 1400 mg L⁻¹, with the anaerobic metabolites, butyrate and propionate accounting for up to 83% of the effluent COD. It was demonstrated that the use of incremental priming, together with a vertical subsurface flow mode of operation enhanced long-term function of constructed wetlands. Future research should focus on determining the concentration gradients and incremental intervals necessary for optimal microbial acclimation to a range of organic pollutants and/or wastewaters, in order to minimize start-up times without significantly impairing the benefits derived from incremental priming.