Rapid detection of viable Bacillus pumilus SAFR-032 encapsulated spores using novel propidium monoazide-linked fluorescence in situ hybridization

The survival of Bacillus pumilus SAFR-032 spores to standard industrial clean room sterilization practices necessitates the development of rapid molecular diagnostic tool(s) for detection and enumeration of viable bacterial spores in industrial clean room environments. This is of importance to maintaining the sterility of clean room processing products. This paper describes the effect of propidium monoazide (PMA) on fluorescence in situ hybridization (FISH) for detecting and enumerating B. pumilus SAFR-032 viable spores having been artificially encapsulated within poly(methylmethacrylate) (Lucite, Plexiglas) and released via an organic solvent (PolyGone-500). The results of the PMA-FISH experiments discussed herein indicate that PMA was able to permeate only the compromised coat layers of non-viable spores, identifying PMA treatment of bacterial spores prior to FISH analysis as a novel method for selecting out the fraction of the spore population that is non-viable from fluorescence detection. The ability of novel PMA-FISH to selectively distinguish and enumerate only the living spores present in a sample is of potential significance for development of improved strategies to minimize spore-specific microbial burden in a given environment.     

Estimating the Abundance of Endospores of Sulfate-Reducing Bacteria in Environmental Samples by Inducing Germination and Exponential Growth

It is a challenge to quantitatively distinguish active from dormant microbial populations in environmental samples. Here we present an approach for estimating the abundance of dormant sulfate-reducing bacteria (SRB), present as viable endospores in environmental samples. This is achieved by inducing endospores to germinate and grow exponentially. We demonstrate this approach for thermophilic SRB in temperate sediment from Aarhus Bay, Denmark. The approach is based on measuring bulk sulfate reduction rates (SRRs) in pasteurized sediment and calculating associated cell-specific SRRs based on average values for SRB growth yield and cell size known from exponentially growing pure cultures. The method presented is a faster bioassay than most probable number enumerations and has the potential to distinguish between slow- and fast-growing SRB populations in the same sample. This bioassay is attractive given the challenges posed by endospores with respect to cell permeabilization and lysis, which are prerequisite in quantitative microscopy- and nucleic acid extraction-based strategies. These molecular approaches additionally rely on designing target-appropriate oligonucleotide probes, whereas the method presented here considers the trait of interest more broadly. This strategy thus presents a useful complement to other methods in ecological investigations of microbial biogeography and for specific industrial applications such as reservoir souring and corrosion risk assessments in the oil and gas sector.     

Endospore production of Bacillus spp. for industrial use

The increased occurrence of antibiotic resistance and the harmful use of pesticides are a major problem of modern times. A ban on the use of antibiotics as growth promoters in animal breeding has put a focus on the probiotics market. Probiotic food supplements are versatile and show promising results in animal and human nutrition. Chemical pesticides can be substituted by biopesticides, which are very effective against various pests in plants due to increased research. What these fields have in common is the use of spore-forming bacteria. The endospore-forming Bacillus spp. belonging to this group offer an effective solution to the aforementioned problems. Therefore, the biotechnological production of sufficient qualities of such endospores has become an innovative and financially viable field of research. In this review, the production of different Bacillus spp. endospores will be reviewed. For this purpose, the media compositions, cultivation conditions and bioprocess optimization methods of the last 20 years are presented and reflected.     

International Space Station environmental microbiome — microbial inventories of ISS filter debris

Despite an expanding array of molecular approaches for detecting microorganisms in a given sample, rapid and robust means of assessing the differential viability of the microbial cells, as a function of phylogenetic lineage, remain elusive. A propidium monoazide (PMA) treatment coupled with downstream quantitative polymerase chain reaction (qPCR) and pyrosequencing analyses was carried out to better understand the frequency, diversity, and distribution of viable microorganisms associated with debris collected from the crew quarters of the International Space Station (ISS). The cultured bacterial counts were more in the ISS samples than cultured fungal population. The rapid molecular analyses targeted to estimate viable population exhibited 5-fold increase in bacterial (qPCR-PMA assay) and 25-fold increase in microbial (adenosine triphosphate assay) burden than the cultured bacterial population. The ribosomal nucleic acid-based identification of cultivated strains revealed the presence of only four to eight bacterial species in the ISS samples, however, the viable bacterial diversity detected by the PMA-pyrosequencing method was far more diverse (12 to 23 bacterial taxa) with the majority consisting of members of actinobacterial genera (Propionibacterium, Corynebacterium) and Staphylococcus. Sample fractions not treated with PMA (inclusive of both live and dead cells) yielded a great abundance of highly diverse bacterial (94 to 118 taxa) and fungal lineages (41 taxa). Even though deep sequencing capability of the molecular analysis widened the understanding about the microbial diversity, the cultivation assay also proved to be essential since some of the spore-forming microorganisms were detected only by the culture-based method. Presented here are the findings of the first comprehensive effort to assess the viability of microbial cells associated with ISS surfaces, and correlate differential viability with phylogenetic affiliation.     

Life cycle and spore resistance of spore-forming Bacillus atrophaeus

Bacillus endospores have a wide variety of important medical and industrial applications. This is an overview of the fundamental aspects of the life cycle, spore structure and factors that influence the spore resistance of spore-forming Bacillus. Bacillus atrophaeus was used as reference microorganism for this review because their spores are widely used to study spore resistance and morphology. Understanding the mechanisms involved in the cell cycle and spore survival is important for developing strategies for spore killing; producing highly resistant spores for biodefense, food and pharmaceutical applications; and developing new bioactive molecules and methods for spore surface display.     

Isolation and characterization of bacteria capable of tolerating the extreme conditions of clean room environments

In assessing the bacterial populations present in spacecraft assembly, spacecraft test, and launch preparation facilities, extremophilic bacteria (requiring severe conditions for growth) and extremotolerant bacteria (tolerant to extreme conditions) were isolated. Several cultivation approaches were employed to select for and identify bacteria that not only survive the nutrient-limiting conditions of clean room environments but can also withstand even more inhospitable environmental stresses. Due to their proximity to spacefaring objects, these bacteria pose a considerable risk for forward contamination of extraterrestrial sites. Samples collected from four geographically distinct National Aeronautics and Space Administration clean rooms were challenged with UV-C irradiation, 5% hydrogen peroxide, heat shock, pH extremes (pH 3.0 and 11.0), temperature extremes (4 degrees C to 65 degrees C), and hypersalinity (25% NaCl) prior to and/or during cultivation as a means of selecting for extremotolerant bacteria. Culture-independent approaches were employed to measure viable microbial (ATP-based) and total bacterial (quantitative PCR-based) burdens. Intracellular ATP concentrations suggested a viable microbial presence ranging from below detection limits to 10(6) cells/m(2). However, only 0.1 to 55% of these viable cells were able to grow on defined culture medium. Isolated members of the Bacillaceae family were more physiologically diverse than those reported in previous studies, including thermophiles (Geobacillus), obligate anaerobes (Paenibacillus), and halotolerant, alkalophilic species (Oceanobacillus and Exiguobacterium). Non-spore-forming microbes (alpha- and beta-proteobacteria and actinobacteria) exhibiting tolerance to the selected stresses were also encountered. The multiassay cultivation approach employed herein enhances the current understanding of the physiological diversity of bacteria housed in these clean rooms and leads us to ponder the origin and means of translocation of thermophiles, anaerobes, and halotolerant alkalophiles into these environments.     

Screening and selection of novel animal probiotics isolated from bovine chyme

Probiotics, gut-colonizing microorganisms capable of conferring a number of health benefits to their hosts, are highly desirable as animal feed supplements. Members of the Gram-positive genus Bacillus are often utilized as probiotics, since endospores formed by those bacteria render them highly resistant to environmental extremes and therefore capable of surviving gastrointestinal tract conditions. In this study, 84 distinct bacterial colonies were obtained from bovine chyme and 29 isolates were determined as Bacillus species. These isolates were principally screened for their antimicrobial activity against a group of two Gram-positive and four Gram-negative bacteria, including known human and animal pathogens such as Salmonella enterica, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus. Seven strains displaying strong antimicrobial activity against the test cohort were further evaluated for other properties desirable from animal probiotics, including high spore-forming capacity and adhesiveness, resistance to pH extremes and ability to form biofilms. The isolates were found to resist simulated gastrointestinal conditions and most of the antibiotics tested. In addition, plasmid presence was checked and cytotoxicity tests were performed to evaluate the potential risks of antibiotic resistance transfer and unintended pathogenic effects on host, respectively. We propose that the bacterial isolates are suitable for use as animal probiotics.     

Application of bacteria as self-healing agent for the development of sustainable concrete

The application of concrete is rapidly increasing worldwide and therefore the development of sustainable concrete is urgently needed for environmental reasons. As presently about 7% of the total anthropogenic atmospheric CO₂ emission is due to cement production, mechanisms that would contribute to a longer service life of concrete structures would make the material not only more durable but also more sustainable. One such mechanism that receives increasing attention in recent years is the ability for self-repair, i.e. the autonomous healing of cracks in concrete. In this study we investigated the potential of bacteria to act as self-healing agent in concrete, i.e. their ability to repair occurring cracks. A specific group of alkali-resistant spore-forming bacteria related to the genus Bacillus was selected for this purpose. Bacterial spores directly added to the cement paste mixture remained viable for a period up to 4 months. A continuous decrease in pore size diameter during cement stone setting probably limited life span of spores as pore widths decreased below 1 μm, the typical size of Bacillus spores. However, as bacterial cement stone specimens appeared to produce substantially more crack-plugging minerals than control specimens, the potential application of bacterial spores as self-healing agent appears promising.     

Potential for Misidentification of a Spore-Forming Paenibacillus polymyxa Isolate as an Endophyte by Using Culture-Based Methods

While Paenibacillus polymyxa strain Pw-2 has been identified as an endophyte of lodgepole pine (M. Shishido, B. M. Loeb, and C. P. Chanway, Can. J. Microbiol. 41:707-713, 1995), P. polymyxa strain L6 has not, a distinction that could be explained by the differential abilities of these isolates to form spores, rather than the differential abilities to colonize the interior tissues of lodgepole pine. Chemical disinfection was used to destroy bacteria on the root exterior, but bacterial endospores are known for their ability to withstand chemical disinfection, and strain Pw-2 was found to produce 300 to 11,000 times more germinating endospores than strain L6 under the experimental conditions used by Shishido et al. (Can. J. Microbiol. 41:707-713, 1995). Attempts to identify strain Pw-2 within lodgepole pine root tissues by using confocal microscopy techniques failed. We discuss the possibility that spore-forming bacteria can be mistakenly identified as endophytes when culture-based methods alone are used.     

Isolation and Characterization of Bacteria Capable of Tolerating the Extreme Conditions of Clean Room Environments

In assessing the bacterial populations present in spacecraft assembly, spacecraft test, and launch preparation facilities, extremophilic bacteria (requiring severe conditions for growth) and extremotolerant bacteria (tolerant to extreme conditions) were isolated. Several cultivation approaches were employed to select for and identify bacteria that not only survive the nutrient-limiting conditions of clean room environments but can also withstand even more inhospitable environmental stresses. Due to their proximity to spacefaring objects, these bacteria pose a considerable risk for forward contamination of extraterrestrial sites. Samples collected from four geographically distinct National Aeronautics and Space Administration clean rooms were challenged with UV-C irradiation, 5% hydrogen peroxide, heat shock, pH extremes (pH 3.0 and 11.0), temperature extremes (4°C to 65°C), and hypersalinity (25% NaCl) prior to and/or during cultivation as a means of selecting for extremotolerant bacteria. Culture-independent approaches were employed to measure viable microbial (ATP-based) and total bacterial (quantitative PCR-based) burdens. Intracellular ATP concentrations suggested a viable microbial presence ranging from below detection limits to 10⁶ cells/m². However, only 0.1 to 55% of these viable cells were able to grow on defined culture medium. Isolated members of the Bacillaceae family were more physiologically diverse than those reported in previous studies, including thermophiles (Geobacillus), obligate anaerobes (Paenibacillus), and halotolerant, alkalophilic species (Oceanobacillus and Exiguobacterium). Non-spore-forming microbes (α- and β-proteobacteria and actinobacteria) exhibiting tolerance to the selected stresses were also encountered. The multiassay cultivation approach employed herein enhances the current understanding of the physiological diversity of bacteria housed in these clean rooms and leads us to ponder the origin and means of translocation of thermophiles, anaerobes, and halotolerant alkalophiles into these environments.     

Biosynthetic Enhancement of the Detection of Bacteria by the Polymerase Chain Reaction

Molecular viability testing (MVT) was previously reported to specifically detect viable bacterial cells in complex samples. In MVT, brief nutritional stimulation induces viable cells, but not non-viable cells, to produce abundant amounts of species-specific ribosomal RNA precursors (pre-rRNA). Quantitative polymerase chain reaction (qPCR) is used to quantify specific pre-rRNAs in a stimulated aliquot relative to a non-stimulated control. In addition to excluding background signal from non-viable cells and from free DNA, we report here that MVT increases the analytical sensitivity of qPCR when detecting viable cells. Side-by-side limit-of-detection comparisons showed that MVT is 5-fold to >10-fold more sensitive than standard (static) DNA-targeted qPCR when detecting diverse bacterial pathogens (Aeromonas hydrophila, Acinetobacter baumannii, Listeria monocytogenes, Mycobacterium avium, and Staphylococcus aureus) in serum, milk, and tap water. Sensitivity enhancement may come from the elevated copy number of pre-rRNA relative to genomic DNA, and also from the ratiometric measurement which reduces ambiguity associated with weak or borderline signals. We also report that MVT eliminates false positive signals from bacteria that have been inactivated by moderately elevated temperatures (pasteurization), a condition that can confound widely-used cellular integrity tests that utilize membrane-impermeant compounds such as propidium iodide (PI) or propidium monoazide (PMA) to differentiate viable from inactivated bacteria. MVT enables the sensitive and specific detection of very small numbers of viable bacteria in complex matrices.     

Sensitive quantification of dipicolinic acid from bacterial endospores in soils and sediments

Endospore-forming bacteria make up an important and numerically significant component of microbial communities in a range of settings including soils, industry, hospitals and marine sediments extending into the deep subsurface. Bacterial endospores are non-reproductive structures that protect DNA and improve cell survival during periods unfavourable for bacterial growth. An important determinant of endospores withstanding extreme environmental conditions is 2,6-pyridine dicarboxylic acid (i.e. dipicolinic acid, or DPA), which contributes heat resistance. This study presents an improved HPLC-fluorescence method for DPA quantification using a single 10-min run with pre-column Tb³⁺ chelation. Relative to existing DPA quantification methods, specific improvements pertain to sensitivity, detection limit and range, as well as the development of new free DPA and spore-specific DPA proxies. The method distinguishes DPA from intact and recently germinated spores, enabling responses to germinants in natural samples or experiments to be assessed in a new way. DPA-based endospore quantification depends on accurate spore-specific DPA contents, in particular, thermophilic spores are shown to have a higher DPA content, meaning that marine sediments with plentiful thermophilic spores may require spore number estimates to be revisited. This method has a wide range of potential applications for more accurately quantifying bacterial endospores in diverse environmental samples.     

Potential for misidentification of a spore-forming Paenibacillus polymyxa isolate as an endophyte by using culture-based methods

While Paenibacillus polymyxa strain Pw-2 has been identified as an endophyte of lodgepole pine (M. Shishido, B. M. Loeb, and C. P. Chanway, Can. J. Microbiol. 41:707-713, 1995), P. polymyxa strain L6 has not, a distinction that could be explained by the differential abilities of these isolates to form spores, rather than the differential abilities to colonize the interior tissues of lodgepole pine. Chemical disinfection was used to destroy bacteria on the root exterior, but bacterial endospores are known for their ability to withstand chemical disinfection, and strain Pw-2 was found to produce 300 to 11,000 times more germinating endospores than strain L6 under the experimental conditions used by Shishido et al. (Can. J. Microbiol. 41:707-713, 1995). Attempts to identify strain Pw-2 within lodgepole pine root tissues by using confocal microscopy techniques failed. We discuss the possibility that spore-forming bacteria can be mistakenly identified as endophytes when culture-based methods alone are used.     

Fungal biosynthesis of gold nanoparticles: mechanism and scale up

Gold nanoparticles (AuNPs) are a widespread research tool because of their oxidation resistance, biocompatibility and stability. Chemical methods for AuNP synthesis often produce toxic residues that raise environmental concern. On the other hand, the biological synthesis of AuNPs in viable microorganisms and their cell-free extracts is an environmentally friendly and low-cost process. In general, fungi tolerate higher metal concentrations than bacteria and secrete abundant extracellular redox proteins to reduce soluble metal ions to their insoluble form and eventually to nanocrystals. Fungi harbour untapped biological diversity and may provide novel metal reductases for metal detoxification and bioreduction. A thorough understanding of the biosynthetic mechanism of AuNPs in fungi is needed to reduce the time of biosynthesis and to scale up the AuNP production process. In this review, we describe the known mechanisms for AuNP biosynthesis in viable fungi and fungal protein extracts and discuss the most suitable bioreactors for industrial AuNP biosynthesis.     

The enumeration of Leptospira interrogans serovar pomona by a bioluminescence ATP assay

A rapid method for enumerating viable Leptospira interrogans serovar pomona cells was investigated using a bacterial adenosine triphosphate (ATP) assay. The ATP was assayed by the luciferin-luciferase bioluminescence reaction. Samples of serovar pomona grown in liquid polysorbate 80-bovine albumin (P80-BA) medium for 1-3 days were analysed for ATP content, culture density (nephelometry), direct cell count and most probable number of viable cells (MPNVC) as determined by the dilution tube technique. A linear relationship was found between ATP content and the number of viable cells over the range of 4 X 10(8) to 8 X 10(9) leptospires/ml. Over this range the correlation coefficient for ATP content versus viable cells (0.96) was similar to the coefficient for culture density versus the number of viable cells. The coefficient for direct counts versus the number of viable cells was smaller. The bioluminescence assay of bacterial ATP is a promising method for enumerating viable leptospires in pure culture.     

Distribution and Downward Movement of Pasteuria penetrans in Field Soil

Endospores of Pasteuria penetrans were evaluated for their vertical distribution in field soil and their downward movement through soil in the laboratory. In the field trial, the number of endospores attached to second-stage juveniles (J2) of Meloidogyne arenaria race 1 varied greatly in different soil depths. There were higher percentages of J2 with endospores attached in former weed fallow plots during the first 3 years of growing peanut than in former bahiagrass and rhizomal peanut plots (P ≤ 0.05). In weed fallow plots a higher average number of endospores per J2 were maintained in all depths, upper three depths, and upper four depths in 1999, 2000, and 2001, respectively (P ≤ 0.05). However, in 2002, there were no differences in the percentages of J2 with endospores attached and in the average of the numbers of endospores per J2 among the treatments (P > 0.05). In laboratory trials, P. penetrans endospores were observed to move throughout the soil through the percolation of water. After one application of water, some endospores were detected 25 to 37.5 cm deep. Endospores were present at the greatest depth, 37.5 to 50 cm, after the third application of water. These results indicate that rain or water applications by irrigation are likely to move endospores to deeper levels of the soil, but the majority of endospores remain in the upper 0-to-30-cm depth.     

Molecular bacterial community analysis of clean rooms where spacecraft are assembled

Molecular bacterial community composition was characterized from three geographically distinct spacecraft-associated clean rooms to determine whether such populations are influenced by the surrounding environment or the maintenance of the clean rooms. Samples were collected from facilities at the Jet Propulsion Laboratory (JPL), Kennedy Space Flight Center (KSC), and Johnson Space Center (JSC). Nine clone libraries representing different surfaces within the spacecraft facilities and three libraries from the surrounding air were created. Despite the highly desiccated, nutrient-bare conditions within these clean rooms, a broad diversity of bacteria was detected, covering all the main bacterial phyla. Furthermore, the bacterial communities were significantly different from each other, revealing only a small subset of microorganisms common to all locations (e.g. Sphingomonas, Staphylococcus). Samples from JSC assembly room surfaces showed the greatest diversity of bacteria, particularly within the Alpha- and Gammaproteobacteria and Actinobacteria. The bacterial community structure of KSC assembly surfaces revealed a high presence of proteobacterial groups, whereas the surface samples collected from the JPL assembly facility showed a predominance of Firmicutes. Our study presents the first extended molecular survey and comparison of NASA spacecraft assembly facilities, and provides new insights into the bacterial diversity of clean room environments .     

Applications of a rapid endospore viability assay for monitoring UV inactivation and characterizing arctic ice cores

We have developed a rapid endospore viability assay (EVA) in which endospore germination serves as an indicator for viability and applied it to (i) monitor UV inactivation of endospores as a function of dose and (ii) determine the proportion of viable endospores in arctic ice cores (Greenland Ice Sheet Project 2 [GISP2] cores; 94 m). EVA is based on the detection of dipicolinic acid (DPA), which is released from endospores during germination. DPA concentrations were determined using the terbium ion (Tb3+)-DPA luminescence assay, and germination was induced by L-alanine addition. The concentrations of germinable endospores were determined by comparison to a standard curve. Parallel EVA and phase-contrast microscopy experiments to determine the percentage of germinable spores yielded comparable results (54.3% +/- 3.8% and 48.9% +/- 4.5%, respectively), while only 27.8% +/- 7.6% of spores produced CFU. EVA was applied to monitor the inactivation of spore suspensions as a function of UV dose, yielding reproducible correlations between EVA and CFU inactivation data. The 90% inactivation doses were 2,773 J/m2, 3,947 J/m2, and 1,322 J/m2 for EVA, phase-contrast microscopy, and CFU reduction, respectively. Finally, EVA was applied to quantify germinable and total endospore concentrations in two GISP2 ice cores. The first ice core contained 295 +/- 19 germinable spores/ml and 369 +/- 36 total spores/ml (i.e., the percentage of germinable endospores was 79.9% +/- 9.3%), and the second core contained 131 +/- 4 germinable spores/ml and 162 +/- 17 total spores/ml (i.e., the percentage of germinable endospores was 80.9% +/- 8.8%), whereas only 2 CFU/ml were detected by culturing.     

The high-resolution architecture and structural dynamics of Bacillus spores

The capability to image single microbial cell surfaces at nanometer scale under native conditions would profoundly impact mechanistic and structural studies of pathogenesis, immunobiology, environmental resistance, and biotransformation. Here, using in vitro atomic force microscopy, we have directly visualized high-resolution native structures of bacterial endospores, including the exosporium and spore coats of four Bacillus species in air and water environments. Our results demonstrate that the mechanisms of spore coat self-assembly are similar to those described for inorganic and macromolecular crystallization. The dimensions of individual Bacillus atrophaeus spores decrease reversibly by 12% in response to a change in the environment from fully hydrated to air-dried state, establishing that the dormant spore is a dynamic physical structure. The interspecies distributions of spore length and width were determined for four species of Bacillus spores in water and air environments. The dimensions of individual spores differ significantly depending upon species, growth regimes, and environmental conditions. These findings may be useful in the reconstruction of environmental and physiological conditions during spore formation and for modeling the inhalation and dispersal of spores. This study provides a direct insight into molecular architecture and structural variability of bacterial endospores as a function of spatial and developmental organizational scales.     

Species differentiation of a diverse suite of Bacillus spores by mass spectrometry-based protein profiling

In this study, we demonstrate the versatility of matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOFMS) protein profiling for the species differentiation of a diverse suite of Bacillus spores. MALDI-TOFMS protein profiles of 11 different strains of Bacillus spores, encompassing nine different species, were evaluated. Bacillus species selected for MALDI-TOFMS analysis represented the spore-forming bacterial diversity of typical class 100K clean room spacecraft assembly facilities. A one-step sample treatment and MALDI-TOFMS preparation were used to minimize the sample preparation time. A library of MALDI-TOFMS spectra was created from these nine Bacillus species, the most diverse protein profiling study of the genus reported to date. Linear correlation analysis was used to successfully differentiate the MALDI-TOFMS protein profiles from all strains evaluated in this study. The MALDI-TOFMS protein profiles were compared with 16S rDNA sequences for their bacterial systematics and molecular phylogenetic affiliations. The MALDI-TOFMS profiles were found to be complementary to the 16S rDNA analysis. Proteomic studies of Bacillus subtilis 168 were pursued to identify proteins represented by the biomarker peaks in the MALDI-TOFMS spectrum. Four small, acid-soluble proteins (A, B, C, and D), one DNA binding protein, hypothetical protein ymf J, and four proteins associated with the spore coat and spore coat formation (coat JB, coat F, coat T, and spoIVA) were identified. The ability to visualize higher-molecular-mass coat proteins (10 to 25 kDa) as well as smaller proteins (<10 kDa) with MALDI-TOFMS profiling is critical for the complete and effective species differentiation of the Bacillus genus.