Regulation of microvillus structure: calcium-dependent solation and cross-linking of actin filaments in the microvilli of intestinal epithelial cells

The bundle of filaments within microvilli of intestinal epithelial cells contains five major proteins including actin, calmodulin, and subunits of 105-, 95-, and 70-kdaltons. It has been previously shown (Howe, C. L., M. S. Mooseker, and T. A. Graves. 1980. Brush-border calmodulin: a major component of the isolated microvillus core. J. Cell Biol. 85: 916-923) that the addition of Ca++ (> 10(-6) M) to microvillus cores causes a rapid, drastic, but at least partially reversible disruption of this actin filament bundle. High-speed centrifugation of microvillus cores treated with Ca++ indicates that several core proteins are solubilized, including 30-50% of the actin and calmodulin, along with much of the 95- and 70-kdalton subunits. Gel filtration of such Ca++ extracts in the presence and absence of Ca++ indicates that microvillar actin "solated" by Ca++ is in an oligomeric state probably complexed with the 95-kdalton subunit. Removal of Ca++ results in the reassembly of F-actin, probably still complexed with 95- kdalton subunit, as determined by gel filtration, cosedimentation, viscometry, and electron microscopy. The 95-kdalton subunit (95K) was purified from Ca++ extracts by DEAE-Sephadex chromatography and its interaction with actin characterized by viscometry, cosedimentation, and EM in the presence and absence of Ca++. In the presence, but not absence, of Ca++, 95K inhibits actin assembly (50% inhibition at 1:50- 60 95K to actin) and also reduces the viscosity of F-actin solutions. Similarly, sedimentation of actin is inhibited by 95K, but a small, presumably oligomeric actin- 95K complex formed in the presence of Ca++ is pelletable after long-term centrifugation. In the absence of Ca++, 95K cosediments with F-actin. EM of 95K-actin mixtures reveals that 95K "breaks" actin into small, filamentous fragments in the presence of Ca++. Reassembly of filaments occurs once Ca++ is removed. In the absence of Ca++, 95K has no effect on filament structure and, at relatively high ratios (1:2-6) of 95K to actin, this core protein will aggregate actin filaments into bundles.     

The structure of cortical cytoplasm

Actin-rich cortical cytoplasm of phagocytic leucocytes forms pseudopodia and controls cell shape and movement by generating directional propulsive and contractile forces. Proteins purified from leucocytes form and deform an actin matrix. Actin-binding protein (ABP) cross-links actin filaments into a three-dimensional lattice with perpendicular branches. This structure, which can be visualized in the electron microscope, is consistent with physical properties of actin-ABP matrices. Gelsolin binds one end of actin filaments with high affinity in the presence of calcium; acumentin, another protein, constitutively binds the other end with low affinity. Together these proteins can control actin filament length and thereby regulate expansion (propulsion) or collapse of the actin network. The assembly state of the network also controls myosin-based contractile forces. A tug-of-war decides the direction of lattice movement, regions of lesser structure tending to move toward regions of greater structure.     

Affinity of alpha-actinin for actin determines the structure and mechanical properties of actin filament gels.

Proteins that cross-link actin filaments can either form bundles of parallel filaments or isotropic networks of individual filaments. We have found that mixtures of actin filaments with alpha-actinin purified from either Acanthamoeba castellanii or chicken smooth muscle can form bundles or isotropic networks depending on their concentration. Low concentrations of alpha-actinin and actin filaments form networks indistinguishable in electron micrographs from gels of actin alone. Higher concentrations of alpha-actinin and actin filaments form bundles. The threshold for bundling depends on the affinity of the alpha-actinin for actin. The complex of Acanthamoeba alpha-actinin with actin filaments has a Kd of 4.7 microM and a bundling threshold of 0.1 microM; chicken smooth muscle has a Kd of 0.6 microM and a bundling threshold of 1 microM. The physical properties of isotropic networks of cross-linked actin filaments are very different from a gel of bundles: the network behaves like a solid because each actin filament is part of a single structure that encompasses all the filaments. Bundles of filaments behave more like a very viscous fluid because each bundle, while very long and stiff, can slip past other bundles. We have developed a computer model that predicts the bundling threshold based on four variables: the length of the actin filaments, the affinity of the alpha-actinin for actin, and the concentrations of actin and alpha-actinin.     

Regulation of water flow by actin-binding protein-induced actin gelatin.

Actin filaments inhibit osmotically driven water flow (Ito, T., K.S. Zaner, and T.P. Stossel. 1987. Biophys. J. 51: 745-753). Here we show that the actin gelation protein, actin-binding protein (ABP), impedes both osmotic shrinkage and swelling of an actin filament solution and reduces markedly the concentration of actin filaments required for this inhibition. These effects depend on actin filament immobilization, because the ABP concentration that causes initial impairment of water flow by actin filaments corresponds to the gel point measured viscometrically and because gelsolin, which noncovalently severs actin filaments, solates actin gels and restores water flow in a solution of actin cross-linked by ABP. Since ABP gels actin filaments in the periphery of many eukaryotic cells, such actin networks may contribute to physiological cell volume regulation.     

Building distinct actin filament networks in a common cytoplasm

Eukaryotic cells generate a diversity of actin filament networks in a common cytoplasm to optimally perform functions such as cell motility, cell adhesion, endocytosis and cytokinesis. Each of these networks maintains precise mechanical and dynamic properties by autonomously controlling the composition of its interacting proteins and spatial organization of its actin filaments. In this review, we discuss the chemical and physical mechanisms that target distinct sets of actin-binding proteins to distinct actin filament populations after nucleation, resulting in the assembly of actin filament networks that are optimized for specific functions.     

Filamentous actin organization in the unfertilized sea urchin egg cortex

We have investigated the organization of filamentous actin in the cortex of unfertilized eggs of the sea urchins Strongylocentrotus purpuratus and Lytechinus variegatus. Rhodamine phalloidin and anti-actin immunofluorescent staining of isolated cortices reveal a punctate pattern of fluorescent sources. Comparison of this pattern with SEM images of microvillar morphology and distribution indicates that filamentous actin in the cortex is predominantly localized in the microvilli. Thin-section TEM and quick-freeze deep-etch ultrastructure of isolated cortices demonstrates that this microvillar-associated actin is in a novel organizational state composed of very short filaments arranged in a tight network and that these filament networks form mounds that extend beyond the plane of the plasma membrane. Actin filaments within the networks do not exhibit free ends and make end-on attachments with the membrane only within the region of the evaginating microvilli. Myosin S-1 dissociable crosslinks, 2-3 nm in diameter, are observed between network filaments and between network filaments and the membrane. A second population of long, individual actin filaments is observed in close lateral association with the plasma membrane and frequently complexes with the microvillar actin networks. The filamentous actin of the unfertilized egg cortex may participate in establishing the mechanical properties of the egg surface and may function in nucleating the assembly of cortical actin following fertilization.     

Ultrastructure of BHK-21 cells treated with dopamine

The ultrastructure of a suspension or of adhered BHK-21 cells exposed to dopamine has been studied. It was found that ultrastructural modifications were observed mainly in cellular regions enriched in actin, including in intercellular desmosome-like contacts, microvilli, and under the membrane cortical layer. Desmosome-like contacts are hypertrophied with increased electron density and fibrillar bridges that appear in specialized contacts. Microvilli fused with each other and with plasma membrane of neighboring cells or were split up and penetrated by fibrils. The cytoplasm is filled with randomly arranged F-actin filaments and has a blotchy appearance. The effect of dopamine is more pronounced in nonattached cells with undifferentiated actin cytoskeletons than in spread cells with stress fibers. The blockage of the D2 receptor with haloperidol does not affect the ultrastructure of BHK-21 or dopamine induced modifications. The data obtained suggest direct interactions between dopamine and the actin cytoskeleton.     

Arabidopsis actin depolymerizing factor4 modulates the stochastic dynamic behavior of actin filaments in the cortical array of epidermal cells

Actin filament arrays are constantly remodeled as the needs of cells change as well as during responses to biotic and abiotic stimuli. Previous studies demonstrate that many single actin filaments in the cortical array of living Arabidopsis thaliana epidermal cells undergo stochastic dynamics, a combination of rapid growth balanced by disassembly from prolific severing activity. Filament turnover and dynamics are well understood from in vitro biochemical analyses and simple reconstituted systems. However, the identification in living cells of the molecular players involved in controlling actin dynamics awaits the use of model systems, especially ones where the power of genetics can be combined with imaging of individual actin filaments at high spatial and temporal resolution. Here, we test the hypothesis that actin depolymerizing factor (ADF)/cofilin contributes to stochastic filament severing and facilitates actin turnover. A knockout mutant for Arabidopsis ADF4 has longer hypocotyls and epidermal cells when compared with wild-type seedlings. This correlates with a change in actin filament architecture; cytoskeletal arrays in adf4 cells are significantly more bundled and less dense than in wild-type cells. Several parameters of single actin filament turnover are also altered. Notably, adf4 mutant cells have a 2.5-fold reduced severing frequency as well as significantly increased actin filament lengths and lifetimes. Thus, we provide evidence that ADF4 contributes to the stochastic dynamic turnover of actin filaments in plant cells.     

The organization and regulation of the macrophage actin skeleton

To move, leukocytes extend portions of their cortical cytoplasm as pseudopods. These pseudopods are filled with a three-dimensional actin filament skeleton, the reversible assembly of which in response to receptor stimulation is thought to play a major role in providing the mechanical force for these protrusive movements. The organization of this actin skeleton occurs at different levels within the cell, and a number of macrophage proteins have been isolated and shown to affect the architecture, assembly, stability, and length of actin filaments in vitro. The architecture of cytoplasmic actin is regulated by proteins that cross-link filaments in higher-order structures. Actin-binding protein plays a major role in defining network structure by cross-linking actin filaments into orthogonal networks. Gelsolin may have a central role in regulating network structure. It binds to the sides of actin filaments and severs them, and binds the "barbed" filament end, thereby blocking monomer addition at this end. Gelsolin is activated to bind actin filaments by microM calcium. Dissociation of gelsolin bound on filament ends occurs in the presence of the polyphosphoinositides, PIP and PIP2. Calcium and PIP2 have been shown to be intracellular messengers of cell stimulation.     

Membrane-associated actin filaments in the cortical cytoplasm of the rat mast cell

Cytoplasmic microfilaments are regular constituents of the cortical cytoplasm of rat mast cells. Heavy meromyosin binding to the microfilaments in glycerinated mast cells indicates that they represent actin filaments. Many of the actin filaments were found to be attached to spots of increased density of the plasma membrane. The actin filaments, possibly as part of an actomyosin system, may be involved in exocytosis of mast cell granules.     

Cytochalasin B and the structure of actin gels

We analyzed the structure of gels formed when macrophage actin-binding protein crosslinks skeletal muscle actin polymers and the effect of the fungal metabolite cytochalasin B on this structure. Measurement of the actin filament length distribution permitted calculation of the critical concentration of crosslinker theoretically required for gelation of actin polymer networks. The experimentally determined critical concentration of actin-binding protein agreed sufficiently with the theoretical to conclude that F-actin-actin-binding protein gels are networks composed of isotropically oriented filaments crosslinked at intervals. The effects of cytochalasin B on these actin networks fits this model. Cytochalasin B (1) bound to F-actin (but not to actin-binding protein), (2) decreased the length of actin filaments without increasing the quantity of monomeric actin, (3) decreased the rigidity of actin networks both in the presence and absence of crosslinking proteins and (4) increased the critical concentration of actin-binding protein required for incipient gelation by a magnitude predicted from network theory if filaments were divided and shortened by the extents observed. The effects of cytochalasin B on gelation were highly dependent on actin concentration and were inhibited by the actin-stabilizing agent phalloidin. Therefore, cytochalasin B diminishes actin gel structure by severing actin filaments at limited sites. The demonstration of gel-sol transformations in actin networks caused by limited actin filament cleavage suggests a new mechanism for the control of cytoplasmic structure.     

Organization of actin in the leading edge of cultured cells: influence of osmium tetroxide and dehydration on the ultrastructure of actin meshworks

The ordered structure of the leading edge (lamellipodium) of cultured fibroblasts is readily revealed in cells extracted briefly in Triton X- 100-glutaraldehyde mixtures, fixed further in glutaraldehyde, and then negatively stained for electron microscopy. By this procedure, the leading edge regions show a highly organised, three-dimensional network of actin filaments together with variable numbers of radiating actin filament bundles or microspikes. The use of Phalloidin after glutaraldehyde fixation resulted in a marginal improvement in filament order. Processing of the cytoskeletons though the additional steps generally employed for conventional electron microscopy resulted in a marked deterioration or complete disruption of the order of the actin filament networks. In contrast, the actin filaments of the stress fiber bundles were essentially unaffected. Thus, postfixation in osmium tetroxide (1% for 7 min at room temperature) transformed the networks to a reticulum of kinked fibers, resembling those produced by the exposure of muscle F-actin to OsO4 in vitro (P. Maupin-Szamier and T. D. Pollard. 1978. J. Cell Biol. 77:837--852). While limited exposure to OsO4 (0.2+ for 20 min at 0 degrees C) obviated this destruction, dehydration in acetone or ethanol, with or without post-osmication, caused a further and unavoidable disordering and aggregation of the meshwork filaments. The meshwork regions of the leading edge then showed a striking resemblance to the networks hitherto described in critical point-dried preparations of cultured cells. I conclude that much of the "microtrabecular lattice" described by Wolosewick and Porter (1979. J. Cell Biol. 82:114--139) in the latter preparations constitutes actin meshworks and actin filament arrays, with their associated components, that have been distorted and aggregated by the preparative procedures employed.     

Actin in triton-treated cortical preparations of unfertilized and fertilized sea urchin eggs

Triton-treated cortical fragments of unfertilized and fertilized sea urchin eggs prepared in the presence of greater than or equal to 5 mM EGTA contain 15-30% of the total egg actin. However, actin filaments are not readily apparent by electron microscopy on the cortical fragments of unfertilized eggs but are numerous on those of fertilized eggs. The majority of the actin associated with cortical fragments of unfertilized eggs is solubilized by dialysis against a low ionic strength buffer at pH 7.5. This soluble actin preparation (less than 50% pure actin) does not form proper filaments in 0.1 M KCl and 3 mM MgCl2, whereas actin purified from this preparation does, as judged by electron microscopy. Optical diffraction analysis reveals that these purified actin filaments have helical parameters very similar to those of muscle actin. Furthermore, the properties of the purified actin with regard to activation of myosin ATPase are similar to those of actin from other cell types. The possibility that actin is maintained in a nonfilamentous form on the inner surface of the unfertilized egg plasma membrane and is induced to assemble upon fertilization is discussed.     

Spatial organization and fine structure of the cortical filament layer in normal locomoting Amoeba proteus

Summary The fine structural organization of a cortical filament layer in normal locomoting Amoeba proteus was demonstrated using improved fixation and embedding techniques. Best results were obtained after application of PIPES-buffered glutaraldehyde in connection with substances known to prevent the depolymerization of F-actin, followed by careful dehydration and freeze-substitution.The filament layer is continuous along the entire surface; it exhibits a varying thickness depending on the cell polarity, measuring several nm in advancing regions and 0.5–1 m in retracting ones. Two different types of filaments are responsible for the construction of the layer: randomly distributed thin (actin) filaments forming an unordered meshwork beneath the plasma membrane, and thick (myosin) filaments mostly restricted to the uroid region in close association with F-actin.The cortical filament layer generates the motive force for amoeboid movement by contraction at posterior cell regions and induces a pressure flow that continues between the uroid with a high hydrostatic pressure and advancing pseudopodia with a low one. The local destabilization of the cell surface as a precondition for the formation of pseudopodia is enabled by the detachment of the cortical filament layer from the plasma membrane. This results in morphological changes by the active separation of peripheral hyaloplasmic and central granuloplasmic regions.     

Electron microscopic localization of myosin II and ABP-120 in the cortical actin matrix of Dictyostelium amoebae using IgG-gold conjugates

To narrow the field of possible functions of an actin-binding protein (ABP-120) and myosin II, we have used high resolution immunocytochemistry with IgG-colloidal gold conjugates to identify the types of actin containing structures with which these proteins are associated in the isolated cell cortex. Staining for myosin II and ABP-120 is associated with distinct regions of the actin cytoskeleton in isolated cortices. Myosin II is localized to lateral arrays of filaments, where it is clustered and has a density that is unrelated to distance from the plasma membrane. Staining for myosin II is associated also with unidentified cytoplasmic vesicles. However, staining for ABP-120 is concentrated in dense networks of branched microfilaments that are adjacent to the plasma membrane or in surface projections (residual pseudopods and lamellopods). These results are consistent with a role for ABP-120 in the formation of filament networks in vivo and further suggest that networks of branched microfilaments are unlikely to participate in motility that is mediated by myosin II.     

Cytoskeleton in vitro: preparation of isolated cytoskeletons with three-dimensional architecture

Cytoskeletons with three-dimensional architecture were isolated from cultured normal rat kidney cells. The preparation procedure consisted of Triton-demembranization of suspended cells followed by differential and sucrose density gradient centrifugation. By using higher (0.5%) and lower (0.1%) Triton concentrations for demembranization, two kinds of isolated cytoskeletons (CSK), called H-CSK and L-CSK, respectively, were prepared. H-CSK and L-CSK displayed unique morphology and protein composition. Three classes of cytoskeletal filaments, microfilaments, intermediate filaments, and microtubules were shown to be major components in the electron microscopic images of the H-CSK. Stereoscopic electron microscopy of the H-CSK, dried by the critical point method, revealed that the cytoskeletal filaments are arranged in three-dimensional configurations even after isolation in vitro. Two-dimensional gel electrophoresis demonstrated that the H-CSK was composed mainly of actin, tubulin, and vimentin, reflecting its basic architecture. Electron microscopic images of L-CSK were more intricate than images of the H-CSK and showed, in addition to the filament types discussed above, anastomosing networks of short filamentous structures. These short filaments, with diameters of 3-8 nm and lengths of 30-150 nm, seemed to cross-link other elements of the cytoskeleton. The morphology of these short filaments resembles that of microtrabeculae observed in situ. Two-dimensional gels of the L-CSK showed over 100 protein spots when the gels were stained by the silver method. Subsequent treatment of the L-CSK with 0.5% Triton removed the microtrabeculae-like materials leaving as a residue the basic cytoskeleton similar to the H-CSK. Our observations indicate that microtrabeculae are composed of heterogenous proteins associated, in some instances, with a core structure of actin.     

An 18K protein from ascites hepatoma cell depolymerizes actin filaments rapidly

Several actin binding proteins were isolated from ascites hepatoma cells AH7974 by DNase I affinity chromatography. Among them, a protein having a molecular weight of 18,000 was further purified by DEAE cellulose and hydroxyapatite column chromatographies and gel filtration on a Sephadex G-75 column. The 18K protein not only inhibits actin polymerization but also depolymerizes actin filaments. This conclusion was supported by viscosity and fluorescence intensity measurements and the DNase I inhibition assay. A chemical cross-linking experiment suggested that the 18K protein binds to monomeric actin and forms and 18K-actin 1:1 complex. The net depolymerization rate by the 18K protein measured by the DNase I inhibition assay was slower than the rapid reduction of the fluorescence intensity of pyrene-labeled F-actin upon addition of the 18K protein. This result suggests that the 18K protein not only binds to monomeric actin but also binds to actin filaments directly. The sedimentation assay showed that a part of the 18K protein was cosedimented with actin filaments. Electron microscopic observations demonstrated that the 18K protein decreased the amount of actin filaments and the remaining filaments appeared to be decorated and distorted by the 18K protein. The 18K protein had no Ca2+ ion sensitivity and exhibited the same effect on both this tumor actin and muscle actin.     

Actin-Binding Proteins in Plant Cells

Abstract: Actinoccurs in all plant cells, as monomers, filaments and filament assemblies. In interphase, actin filaments form a cortical network, co-align with cortical microtubules, and extend throughout the cytoplasm functioning in cytoplasmic streaming. During mitosis, they co-align with microtubules in the preprophase band and phragmoplast and are indispensa ble for cell division. Actin filaments continually polymerise and depolymerise from a pool of monomers, and signal transduction pathways affecting cell morphogenesis modify the actin cytoskeleton. The interactions of actin monomers and filaments with actin-binding proteins (ABP5) control actin dynamics. By binding to actin monomers, ABPs, such as profilin, regulate the pool of monomers available for polymerisation. By breaking filaments or capping filament ends, ABPs, such as actin depoly-merising factor (ADF), prevent actin filament elongation or loss of monomers from filament ends. By bivalent cross-linking to actin filaments, ABPs, such as fimbrin and other members of the spectrin family, produce a variety of higher order assemblies, from bundles to networks. The motor protein ABPs,. which are not covered in this review, move organelles along ac tin filaments. The large variety of ABPs share a number of functional modules. A plant representative of ABPs with particular modules, and therefore particular functions, is treated in this review.     

Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three- dimensional network resembling the peripheral cytoskeleton of motile cells.     

Action of cytochalasin D on cytoskeletal networks

Extraction of SC-1 cells (African green monkey kidney) with the detergent Triton X-100 in combination with stereo high-voltage electron microscopy of whole mount preparations has been used as an approach to determine the mode of action of cytochalasin D on cells. The cytoskeleton of extracted BSC-1 cells consists of substrate-associated filament bundles (stress fibers) and a highly cross-linked network of four major filament types extending throughout the cell body; 10-nm filaments, actin microfilaments, microtubules, and 2- to 3-nm filaments. Actin filaments and 2- to 3-nm filaments form numerous end- to-side contacts with other cytoskeletal filaments. Cytochalasin D treatment severely disrupts network organization, increases the number of actin filament ends, and leads to the formation of filamentous aggregates or foci composed mainly of actin filaments. Metabolic inhibitors prevent filament redistribution, foci formation, and cell arborization, but not disorganization of the three-dimensional filament network. In cells first extracted and then treated with cytochalasin D, network organization is disrupted, and the number of free filament ends is increased. Supernates of preparations treated in this way contain both short actin filaments and network fragments (i.e., actin filaments in end-to-side contact with other actin filaments). It is proposed that the dramatic effects of cytochalasin D on cells result from both a direct interaction of the drug with the actin filament component of cytoskeletal networks and a secondary cellular response. The former leads to an immediate disruption of the ordered cytoskeletal network that appears to involve breaking of actin filaments, rather than inhibition of actin filament-filament interactions (i.e., disruption of end-to-side contacts). The latter engages network fragments in an energy-dependent (contractile) event that leads to the formation of filament foci.