Visualization of RNA crystal growth by atomic force microscopy.

The crystallization of transfer RNA (tRNA) was investigated using atomic force microscopy (AFM) over the temperature range from 4 to 16 degrees C, and this produced the first in situ AFM images of developing nucleic acid crystals. The growth of the (110) face of hexagonal yeast tRNAPhe crystals was observed to occur at steps on vicinal hillocks generated by multiple screw dislocation sources in the temperature range of 13.5-16 degrees C. Two-dimensional nucleation begins to dominate at 13.5 degrees C, with the appearance of three-dimensional nuclei at 12 degrees C. The changes in growth mechanisms are correlated with variations in supersaturation which is higher in the low temperature range. Growth of tRNA crystals was characterized by a strong anisotropy in the tangential step movement and transformation of growth modes on single crystals were directly observed by AFM over the narrow temperature range utilized. Finally, lattice resolution images of the molecular structure of surface layers were recorded. The implications of the strong temperature dependence of tRNAPhe crystal growth are discussed in view of improving and better controlling crystallization of nucleic acids.     

In situ observation of elementary growth processes of protein crystals by advanced optical microscopy

To start systematically investigating the quality improvement of protein crystals, the elementary growth processes of protein crystals must be first clarified comprehensively. Atomic force microscopy (AFM) has made a tremendous contribution toward elucidating the elementary growth processes of protein crystals and has confirmed that protein crystals grow layer by layer utilizing kinks on steps, as in the case of inorganic and low-molecular-weight compound crystals. However, the scanning of the AFM cantilever greatly disturbs the concentration distribution and solution flow in the vicinity of growing protein crystals. AFM also cannot visualize the dynamic behavior of mobile solute and impurity molecules on protein crystal surfaces. To compensate for these disadvantages of AFM, in situ observation by two types of advanced optical microscopy has been recently performed. To observe the elementary steps of protein crystals noninvasively, laser confocal microscopy combined with differential interference contrast microscopy (LCM-DIM) was developed. To visualize individual mobile protein molecules, total internal reflection fluorescent (TIRF) microscopy, which is widely used in the field of biological physics, was applied to the visualization of protein crystal surfaces. In this review, recent progress in the noninvasive in situ observation of elementary steps and individual mobile protein molecules on protein crystal surfaces is outlined.     

Localization and force analysis at the single virus particle level using atomic force microscopy

Atomic force microscopy (AFM) is a vital instrument in nanobiotechnology. In this study, we developed a method that enables AFM to simultaneously measure specific unbinding force and map the viral glycoprotein at the single virus particle level. The average diameter of virus particles from AFM images and the specificity between the viral surface antigen and antibody probe were integrated to design a three-stage method that sets the measuring area to a single virus particle before obtaining the force measurements, where the influenza virus was used as the object of measurements. Based on the purposed method and performed analysis, several findings can be derived from the results. The mean unbinding force of a single virus particle can be quantified, and no significant difference exists in this value among virus particles. Furthermore, the repeatability of the proposed method is demonstrated. The force mapping images reveal that the distributions of surface viral antigens recognized by antibody probe were dispersed on the whole surface of individual virus particles under the proposed method and experimental criteria; meanwhile, the binding probabilities are similar among particles. This approach can be easily applied to most AFM systems without specific components or configurations. These results help understand the force-based analysis at the single virus particle level, and therefore, can reinforce the capability of AFM to investigate a specific type of viral surface protein and its distributions.     

Chemoselective modification of turnip yellow mosaic virus by Cu(I) catalyzed azide-alkyne 1,3-dipolar cycloaddition reaction and its application in cell binding

Turnip yellow mosaic virus (TYMV) is an icosahedral plant virus with a diameter of 28-30 nm that can be isolated in gram quantities from turnip or Chinese cabbage inexpensively. In this study, TYMV combined with spatially addressable surface chemistries was selected as a prototype bionanoparticle for modulating patterns of cell adhesion, morphology, and proliferation. We exploited the chemical reactivity of TYMV using the mild conditions of Cu(I) catalyzed azide-alkyne cycloaddition (CuAAC) reaction, the best example of "click" chemistry. Oligo-ethylene glycol (OEG) short chain, coumarintriazole, and RGD-containing peptide were grafted on the surface of TYMV via carbodiimide activation and CuAAC reaction. The bioconjugation to intact viral particles was confirmed by MS, TEM, FPLC, and SDS-PAGE with fluorescence visualization analysis. Therefore, this method is a generally useful means of incorporating various types of functionalities onto the TYMV surface. Further studies were done to learn the behavior of NIH-3T3 fibroblast cells on the modified or unmodified TYMV surfaces. OEG-modified TYMV surfaces retarded cell attachment and growth, while cell adhesion, spreading, and proliferation were dramatically enhanced on RGD-modified TYMV surfaces. Compared with RGD immobilized 3-aminopropyltriethoxysilane-coated glass surface, the cells are more ready to spread fully and proliferate on TYMV-RGD coated surface, which thus provides a more cell-friendly environment with nanometer-scale surface features. This illustrates the potential application of plant virus based materials in tissue engineering, drug delivery, and biosensing.     

Preliminary X-ray diffraction analysis of crystals of turnip yellow mosaic virus (TYMV)

Turnip yellow mosaic virus (TYMV) was purified from Chinese cabbage and crystallized in a form that permits high resolution structural analysis using X-ray diffraction. The crystals have a hexagonal bipyramidal morphology and often achieve dimensions of 1.0 × 1.0 × 0.5 mm. The crystals appear to be of hexagonal space group P6₂22 with a = b = 525 Å, c=315 Å, but we cannot strictly rule out the possibility that the space group is P622. They appear different than any crystals of TYMV previously reported. There are three T = 3 virus particles in the unit cell, which implies that one quarter of the particle, or 45 protein subunits, comprises the asymmetric unit of the crystal. Native data have been collected using synchrotron radiation to a resolution of 3.2 Å. © 1995 Wiley-Liss, Inc.     

Molecular resolution imaging of macromolecular crystals by atomic force microscopy.

Atomic force microscopy (AFM) images at the molecular level have been obtained for a number of different protein and virus crystals. They can be utilized in some special cases to obtain information useful to crystal structure analyses by x-ray diffraction. In particular, questions of space group enantiomer, the packing of molecules within a unit cell, the number of molecules per asymmetric unit, and the dispositions of multiple molecules within the asymmetric unit may be resolved. In addition, because of the increasing sensitivity and resolution of the AFM technique, some molecular features of very large asymmetric units may be within reach. We describe here high-resolution studies, using AFM, to visualize individual molecules and viruses in their crystal lattices. These investigations included fungal lipase, lysozyme, thaumatin, canavalin, and satellite tobacco mosaic virus (STMV).     

Turnip yellow mosaic virus as a chemoaddressable bionanoparticle

Viruses and virus-like particles (VLPs) have been demonstrated to be robust scaffolds for the construction of nanomaterials. In order to develop new nanoprobes for time-resolved fluoroimmuno assays as well as to investigate the two-dimensional self-assembly of viruses and VLPs, the icosahedral turnip yellow mosaic virus (TYMV) was investigated as a potential building block in our study. TYMV is an icosahedral plant virus with an average diameter of 28 nm that can be isolated inexpensively in gram quantities from turnips or Chinese cabbage. There are 180 coat protein subunits per TYMV capsid. The conventional N-hydroxysuccinimide-mediated amidation reaction was employed for the chemical modification of the viral capsid. Tryptic digestion with sequential MALDI-TOF MS analysis identified that the amino groups of K32 of the flexible N-terminus made the major contribution for the reactivity of TYMV toward N-hydroxysuccinimide ester (NHS) reagents. The reactivity was also monitored with UV-vis absorbance and fluorescence, which revealed that approximately 60 lysines per particle could be addressed. We hypothesized that the flexible A chain contains the reactive lysine because the crystal structure of TYMV has shown that chain A is much more flexible compared to B and C, especially at the N-terminal region where the Lys-32 located. In addition, about 90 to 120 carboxyl groups, located in the most exposed sequence, could be modified with amines catalyzed with 1-(3-dimethylaminopropyl-3-ethylcarbodiimide) hydrochloride (EDC) and sulfo-NHS. TYMV was stable to a wide range of reaction conditions and maintained its integrity after the chemical conjugations. Therefore, it can potentially be employed as a reactive scaffold for the display of a variety of materials for applications in many areas of nanoscience.     

Repair of impurity-poisoned protein crystal surfaces

The surface morphology of Bence-Jones protein (BJP) crystals was investigated during growth and dissolution by using in situ atomic force microscopy (AFM). It was shown that over a wide supersaturation range, impurities adsorb on the crystalline surface and ultimately form an impurity adsorption layer that prevents further growth of the crystal. At low undersaturations, this impurity adsorption layer prevents dissolution. At greater undersaturation, dissolution takes place around large particles incorporated into the crystal, leading to etch pits with impurity-free bottoms. On restoration of supersaturation conditions, two-dimensional nucleation takes place on the impurity-free bottoms of these etch pits. After new growth layers fill in the etch pits, they cover the impurity-poisoned top layer of the crystal face. This leads to the resumption of its growth. Formation of an impurity-adsorption layer can explain the termination of growth of macromolecular crystals that has been widely noted. Growth-dissolution-growth cycles could be used to produce larger crystals that otherwise would have stopped growing because of impurity poisoning.     

Growth and disorder of macromolecular crystals: insights from atomic force microscopy and X-ray diffraction studies

The growth processes and defect structures of protein and virus crystals have been studied in situ by atomic force microscopy (AFM), X-ray diffraction topography, and high-resolution reciprocal space scanning. Molecular mechanisms of macromolecular crystallization were visualized and fundamental kinetic and thermodynamic parameters, which govern the crystallization process of a number of macromolecular crystals, have been determined. High-resolution AFM imaging of crystal surfaces provides information on the packing of macromolecules within the unit cell and on the structure of large macromolecular assemblies. X-ray diffraction techniques provide a bulk probe with poorer spatial resolution but excellent sensitivity to mosaicity and strain. Defect structures and disorder created in macromolecular crystals during growth, seeding, and post-growth treatments including flash cooling were characterized and their impacts on the diffraction properties of macromolecular crystals have been analyzed. The diverse and dramatic effects of impurities on growth and defect formation have also been studied. Practical implications of these fundamental insights into the improvement of macromolecular crystallization protocols are discussed.     

Incorporation of microcrystals by growing protein and virus crystals

In the course of time-lapse video and atomic force microscopy (AFM) investigations of macromolecular crystal growth, we frequently observed the sedimentation of microcrystals and three-dimensional nuclei onto the surfaces of much larger, growing protein or virus crystals. This was followed by the direct incorporation over time of the smaller crystals into the bulk of the larger crystals. In some cases, clear indications were present that upon absorption of the small crystal onto the surface of the larger, there was proper alignment of the respective lattices, and consolidation proceeded without observable defect formation, i.e., the two lattices knitted together without discontinuity. In the case of at least one virus crystal, cubic satellite tobacco mosaic virus (STMV), addition of three-dimensional nuclei and subsequent expansion provided the principal growth mechanism at high supersaturation. This process has not been reported for growth from solution of conventional crystals. In numerous other instances, the lattices of the small and larger crystals were obviously misaligned, and incorporation occurred with the formation of some defect. This phenomenon of small crystals physically embedded in larger crystals could only degrade the overall diffraction and materials properties of macromolecular crystals.     

Cell surface labelling of mononuclear cells with antisera associated to turnip yellow mosaic virus or alphalpha mosaic virus particles. A freeze-etch study

Synopsis Turnip yellow mosaic virus (TYMV) and alphalpha mosaic virus (AMV) were used as immuno-electron microscopical markers to detect cell surface receptors on mononuclear cells in freeze-etch replicas. TYMV particles were conjugated with vacuum-distilled glutaraldehyde to rabbit IgG anti-mouse immunoglobulins (TYMV-RAMIg conjugate) or to rabbit IgG anti-mouse antigen (TYMV-RAMTh conjugate). B-lymphocytes incubated with TYMV-RAMIg conjugate showed either randomly distributed particles or patches of virus particles on the etched surface of the cell membrane. Mouse thymocytes incubated with TYMV-RAMTh conjugate, however, showed only a random distribution of the virus particles. Human mononuclear cells incubated with rabbit IgG anti-AMV and AMV for the demonstration of the receptors for the Fc fragment of IgG showed the oblong shape of the AMV particles on the etched cell membrane. Fc receptors were either randomly distributed or aggregrated into patches. It is concluded that both types of virus particles are useful markers for the demonstration of membrane receptors in freeze-etch replicas of labelled cells.     

Annealing and melting behavior of poly(l-lactic acid) single crystals as revealed by in situ atomic force microscopy

In situ annealing and melting of folded-chain single crystals of poly(l-lactic acid) (PLLA) was examined by temperature-controlled atomic force microscopy (AFM). Prominent changes in the crystal appearance during annealing could be followed in real time by the AFM at temperatures above the original crystallization temperature. Thickening of the crystal edges could be occasionally observed, and this indicates that the crystal edges are less perfect than the central, well-ordered regions. At higher annealing temperatures, melting of the unthickened part started. The melting of the unthickened region progressed from the boundaries of the thickened portion normal to the growth face, rather than to the folding surfaces. In addition, it is suggested that melting also initiates at defective or distorted sites in the crystal as revealed by transmission electron microscopy (TEM) and AFM.     

Adsorption and hydrolysis reactions of poly(hydroxybutyric acid) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum onto poly[(R)-3-hydroxybutyric acid

Reaction processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) with two types of poly(hydroxybutyric acid) (PHB) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum were characterized by means of atomic force microscopy (AFM) and quartz crystal microbalance (QCM). The PHB depolymerase from R. pickettii T1 consists of catalytic, linker, and substrate-binding domains, whereas the one from P. funiculosum lacks a substrate-binding domain. We succeeded in observing the adsorption of single molecules of the PHB depolymerase from R. pickettii T1 onto P(3HB) single crystals and the degradation of the single crystals in a phosphate buffer solution at 37 degrees C by real-time AFM. On the contrary, the enzyme molecule from P. funiculosum was hardly observed at the surface of P(3HB) single crystals by real-time AFM, even though the enzymatic degradation of the single crystals was surely progressed. On the basis of the AFM observations in air of the P(3HB) single crystals after the enzymatic treatments, however, not only the PHB depolymerase from R. pickettii T1 but also that from P. funiculosum adsorbed onto the surface of P(3HB) crystals, and both concentrations of the enzymes on the surface were nearly identical. This means both enzymes were adsorbed onto the surface of P(3HB) single crystals. Moreover, QCM measurements clarified quantitatively the differences in detachment behavior between two types of PHB depolymerases, namely the enzyme from R. pickettii T1 was hardly detached but the enzyme from P. funiculosum was released easily from the surface of P(3HB) crystals under an aqueous condition.     

In situ observation of crystal growth for poly[(S)-lactide] by temperature-controlled atomic force microscopy

The crystallization behavior and crystalline morphologies of poly[(S)-lactide] (P[(S)-LA]) in thin films crystallized isothermally at over 160 degrees C were characterized by transmission electron microscopy and atomic force microscopy (AFM). The dendritic crystal and hexagonal crystal were formed in thin film with thicknesses below 30 nm or over 50 nm, respectively. The crystal structures of dendritic and hexagonal crystals were identical, suggesting that the crystalline morphology of P[(S)-LA] is strongly dependent upon the film thickness. In situ observation of the crystal growth in the P[(S)-LA] thin film at 165 degrees C from the melt was carried out by using temperature-controlled AFM equipped with a heating stage. The initial stage of crystallization and development of lamellae were successfully observed during isothermal crystallization at 165 degrees C. The first forming crystal showed the edge-on orientation, and grew to S-shaped edge-on lamellae. Dendritic flat-on crystals were developed from the S-shaped edge-on lamellae. The growth rates of flat-on and edge-on lamellae were almost identical.     

The Pro/Hel region is indispensable for packaging non-replicating turnip yellow mosaic virus RNA, but not replicating viral RNA

Turnip yellow mosaic virus (TYMV) is a spherical plant virus that has a single 6.3 kb positive strand RNA. The genomic RNA has a tRNA-like structure (TLS) at the 3′-end. The 3′-TLS and hairpins in the 5′-untranslated region supposedly serve as packaging signals; however, recent studies have shown that they do not play a role in TYMV RNA packaging. In this study, we focused on packaging signals by examining a series of deletion mutants of TYMV. Analysis of encapsidated viral RNA after agroinfiltration of the deletion constructs into Nicotiana benthamiana showed that the mutant RNA lacking the protease (Pro)/helicase (Hel) region was not encapsidated by the coat proteins provided in trans, implicating that a packaging signal lies in the Pro/Hel region. Examination of two Pro⁻Hel⁻ mutants showed that protein activity from the Pro/Hel domains was dispensable for the packaging of the non-replicating TYMV RNA. In contrast, the mutant TYMV RNA lacking the Pro/Hel region was efficiently encapsidated when the mutant TYMV was co-introduced with a wild-type TYMV, suggesting that packaging mechanisms might differ depending on whether the virus is replicating or not.     

The neuraminidase of influenza virus

It is the enzyme neuraminidase, projecting from the surface of influenza virus particles, which allows the virus to leave infected cells and spread in the body. Antibodies which inhibit the enzyme limit the infection, but antigenic variation of the neuraminidase renders it ineffective in a vaccine. This article describes the crystal structure of influenza virus neuraminidase, information about the active site which may lead to development of specific and effective inhibitors of the enzyme, and the structure of epitopes (antigenic determinants) on the neuraminidase. The 3-dimensional structure of the epitopes was obtained by X-ray diffraction methods using crystals of neuraminidase complexed with monoclonal antibody Fab fragments. Escape mutants, selected by growing virus in the presence of monoclonal antibodies to the neuraminidase, possess single amino acid sequence changes. The crystal structure of two mutants showed that the change in structure was restricted to that particular sidechain, but the change in the epitope was sufficient to abolish antibody binding even though it is known in one case that 21 other amino acids on the neuraminidase are in contact with the antibody.     

Replication and packaging of Turnip yellow mosaic virus RNA containing Flock house virus RNA1 sequence

Turnip yellow mosaic virus (TYMV) is a spherical plant virus that has a single 6.3 kb positive strand RNA as a genome. In this study, RNA1 sequence of Flock house virus (FHV) was inserted into the TYMV genome to test whether TYMV can accommodate and express another viral entity. In the resulting construct, designated TY-FHV, the FHV RNA1 sequence was expressed as a TYMV subgenomic RNA. Northern analysis of the Nicotiana benthamiana leaves agroinfiltrated with the TY-FHV showed that both genomic and subgenomic FHV RNAs were abundantly produced. This indicates that the FHV RNA1 sequence was correctly expressed and translated to produce a functional FHV replicase. Although these FHV RNAs were not encapsidated, the FHV RNA having a TYMV CP sequence at the 3’-end was efficiently encapsidated. When an eGFP gene was inserted into the B2 ORF of the FHV sequence, a fusion protein of B2-eGFP was produced as expected. [BMB Reports 2014; 47(6): 330-335]     

Resolving structure and mechanical properties at the nanoscale of viruses with frequency modulation atomic force microscopy

Structural Biology (SB) techniques are particularly successful in solving virus structures. Taking advantage of the symmetries, a heavy averaging on the data of a large number of specimens, results in an accurate determination of the structure of the sample. However, these techniques do not provide true single molecule information of viruses in physiological conditions. To answer many fundamental questions about the quickly expanding physical virology it is important to develop techniques with the capability to reach nanometer scale resolution on both structure and physical properties of individual molecules in physiological conditions. Atomic force microscopy (AFM) fulfills these requirements providing images of individual virus particles under physiological conditions, along with the characterization of a variety of properties including local adhesion and elasticity. Using conventional AFM modes is easy to obtain molecular resolved images on flat samples, such as the purple membrane, or large viruses as the Giant Mimivirus. On the contrary, small virus particles (25-50 nm) cannot be easily imaged. In this work we present Frequency Modulation atomic force microscopy (FM-AFM) working in physiological conditions as an accurate and powerful technique to study virus particles. Our interpretation of the so called "dissipation channel" in terms of mechanical properties allows us to provide maps where the local stiffness of the virus particles are resolved with nanometer resolution. FM-AFM can be considered as a non invasive technique since, as we demonstrate in our experiments, we are able to sense forces down to 20 pN. The methodology reported here is of general interest since it can be applied to a large number of biological samples. In particular, the importance of mechanical interactions is a hot topic in different aspects of biotechnology ranging from protein folding to stem cells differentiation where conventional AFM modes are already being used.     

Structure of intracellular mature vaccinia virus visualized by in situ atomic force microscopy

Vaccinia virus, the basis of the smallpox vaccine, is one of the largest viruses to replicate in humans. We have used in situ atomic force microscopy (AFM) to directly visualize fully hydrated, intact intracellular mature vaccinia virus (IMV) virions and chemical and enzymatic treatment products thereof. The latter included virion cores, core-enveloping coats, and core substructures. The isolated coats appeared to be composed of a highly cross-linked protein array. AFM imaging of core substructures indicated association of the linear viral DNA genome with a segmented protein sheath forming an extended approximately 16-nm-diameter filament with helical surface topography; enclosure of this filament within a 30- to 40-nm-diameter tubule which also shows helical topography; and enclosure of the folded, condensed 30- to 40-nm-diameter tubule within the core by a wall covered with peg-like projections. Proteins observed attached to the 30- to 40-nm-diameter tubules may mediate folding and/or compaction of the tubules and/or represent vestiges of the core wall and/or pegs. An accessory "satellite domain" was observed protruding from the intact core. This corresponded in size to isolated 70- to 100-nm-diameter particles that were imaged independently and might represent detached accessory domains. AFM imaging of intact virions indicated that IMV underwent a reversible shrinkage upon dehydration (as much as 2.2- to 2.5-fold in the height dimension), accompanied by topological and topographical changes, including protrusion of the satellite domain. As shown here, the chemical and enzymatic dissection of large, asymmetrical virus particles in combination with in situ AFM provides an informative complement to other structure determination techniques.