Electrochemical optical waveguide lightmode spectroscopy (EC-OWLS): a pilot study using evanescent-field optical sensing under voltage control to monitor polycationic polymer adsorption onto indium tin oxide (ITO)-coated waveguide chips

A new technique has been developed that combines evanescent-field optical sensing with electrochemical control of surface adsorption processes. This new technique, termed "electrochemical optical waveguide lightmode spectroscopy" (EC-OWLS), proved efficient in monitoring molecular surface adsorption and layer thickness changes of an adsorbed polymer layer examined in situ as a function of potential applied to a waveguide in a pilot study. For optical sensing, a layer of indium tin oxide (ITO) served as both a high-refractive-index waveguide and a conductive electrode. In addition, an electrochemical flow-through fluid cell was provided, which incorporated working, reference, and counter electrodes, and was compatible with the constraints of optical sensing. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) served as a model, polycation adsorbate. Adsorption of PLL-g-PEG from aqueous buffer solution increased from 125 to 475 ng/cm(2 )along a sigmoidal path as a function of increasing potential between 0 and 1.5 V versus the Ag reference electrode. Upon buffer rinse, adsorption was partially reversible when a potential of >/=0.93 V was maintained on the ITO waveguide. However, reducing the applied potential back to 0 V before rinsing resulted in irreversible polymer adsorption. PLL-g-PEG modified with biotin demonstrated similar adsorption characteristics, but subsequent streptavidin binding was independent of biotin concentration. Applying positive potentials resulted in increased adsorbed mass, presumably due to polymer chain extension and reorganization in the molecular adlayer.     

Stable stealth function for hollow polyelectrolyte microcapsules through a poly(ethylene glycol) grafted polyelectrolyte adlayer

Prospective biomedical applications of hollow polyelectrolyte microcapsules, for example, as drug delivery systems, require surface modifications that help to escape clearance by the mononuclear phagocytic system (MPS). Layer-by-layer assembled microcapsules that were alternatingly composed of polystyrene sulfonate (PSS) and polyallylamine hydrochloride (PAH) were coated with adlayers of poly(ethylene glycol) (PEG)-grafted poly-L-lysine (PLL-g-PEG) and poly-L-glutamic acid (PGA-g-PEG). Their effects on MPS recognition were studied in primary cell cultures of human monocyte derived dendritic cells and macrophages. PGA-g-PEG coatings had no significant effect on cellular recognition, which may be explained by insufficient PEG density of the adlayer. Contrary, PLL-g-PEG effectively blocked phagocytosis of coated microcapsules. In addition, PLL-g-PEG coatings showed efficient adlayer stability for at least 3 weeks, and PAH/PSS microcapsules did not impair phagocyte viability. Our results demonstrate that layer-by-layer assembled polyelectrolyte microcapsules coated with a PEG-grafted polyelectrolyte, PLL-g-PEG, represent a promising platform for a drug delivery system that escapes fast clearance by the MPS.     

Immobilization of homooligonucleotide probe layers onto Si/SiO(2) substrates: characterization by electrochemical impedance measurements and radiolabelling

Radiolabelling and electrochemical impedance measurements were used to characterize the immobilization of single stranded homooligonucleotides onto silica surfaces and their subsequent hybridization with complementary strands. The immobilization procedure consists of grafting an epoxysilane onto microelectronic grade Si/SiO(2) substrates, and coupling oligonucleotides bearing a hexylamine linker onto the epoxy moiety. Radiolabelling was used as a reference method to quantify the amount of immobilized and hybridized oligonucleotides. These results show that the Si/SiO(2) substrates modified with an epoxysilane yield a surface concentration of approximately 10(11) strands/cm(2) for the immobilized oligonucleotides, after vigorous washings, and that approximately 36% of these undergo hybridization with complementary strands. The impedance measurements, which provide a direct means of detecting variations in electrical charge accumulation across the semiconductor/oxide/electrolyte structure when the oxide surface is chemically modified, show that the semiconductor's flat band potential undergoes reproducible shifts of -150 and -100 mV following the immobilization and the hybridization step, respectively. These results demonstrate that electrochemical impedance measurements using chemically modified semiconductor/oxide/electrolyte structures of this type offer a viable alternative for the direct detection of complementary DNA strands upon hybridization.     

An endothelial cell compatible biosensor fabricated using optically thin indium tin oxide silicon nitride electrodes

This study describes the fabrication and performance of an endothelial cell compatible, optically thin, indium tin oxide (ITO) microimpedance biosensor. The biosensor was constructed by sputtering a thin insulating layer of silicon nitride (Si(3)N(4)) onto a 100 nm thick ITO layer. Indium tin oxide electrodes were formed by chemically etching 250 or 500 microm diameter holes through the Si(3)N(4) insulating layer. The exposed ITO electrode was electrically connected to an ITO counter electrode, approximately 2 cm(2) in area, via a 400 microL well containing cell culture media. A lock-in amplifier circuit monitored the impedance of porcine pulmonary artery endothelial cells (PPAECs) cultivated on the electrodes as a function of frequency, between 10 and 100 kHz, and as a function of time, at 5.62 kHz. The ITO-Si(3)N(4) microelectrodes provided consistent and repeatable impedance measurements to the attachment and spreading of PPAECs. In addition, the ITO-Si(3)N(4) electrodes were recyclable, robust, resistant to ethanol sterilization, and had a high optical transmittance. Most importantly, the ITO-Si(3)N(4) electrodes allowed optical access for dynamic cellular attachment imaging. The 5.62 kHz time dependent cellular impedance response to the drug Cytochalasin D further demonstrated the feasibility of using this electrode configuration for dynamic cellular impedance studies.     

Prospective theoretical and experimental study towards electrochemically grafted poly(N-vinyl-2-pyrrolidone) films on metallic surfaces

Quantum chemistry calculations of equilibrium geometry, atomic charges, dipole moment, and frontier orbital energies are carried out on model N-vinyl-2-pyrrolidone, its radical anion and cation, and three protonated derivatives. Attempts to obtain poly(N-vinyl-2-pyrrolidone) films grafted on nickel and platinum electrodes, respectively by cathodic and anodic polarizations, are reported. A thin, covering and insulating film is obtained on the Pt anode, as indicated by surface characterizations carried out with UPS and IRRAS spectroscopies. The fact that the film remains adherent to the metallic surface in spite of a permanent contact with an acetonitrile solution in which poly(N-vinyl-2-pyrrolidone) is soluble suggests that chemisorption has indeed been achieved.     

Electrocatalytic oxidation and determination of deferasirox and deferiprone on a nickel oxyhydroxide-modified electrode

The electrocatalytic oxidation of two orally administered iron chelator drugs (deferiprone, CP20, and deferasirox, ICL670) was investigated on a nickel oxyhydroxide-modified nickel electrode in alkaline solution. The oxidation process involved and its kinetics were investigated using cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy techniques, as well as steady-state polarization measurements. Voltammetric studies indicated that in the presence of the drugs under study, the anodic peak current of low-valence nickel species increased, followed by a decrease in the corresponding cathodic current. This result indicates that the drugs were oxidized via oxyhydroxide species immobilized on the electrode surface via an EC' mechanism. A mechanism based on the electrochemical generation of Ni(III) active sites and their subsequent consumption by the drugs in question was also investigated. The corresponding rate law under the control of charge transfer was developed, and kinetic parameters were derived. In this context, the charge-transfer resistance accessible both theoretically and through impedancemetry was used as a criterion. The rate constants of the catalytic oxidation of the drugs and the electron-transfer coefficients are reported. A sensitive, simple, and time-saving amperometric procedure was developed for the analysis of deferasirox and deferiprone, with detection limits of 28 and 19 microM, respectively. The electrode was used for the direct assay of deferasirox and deferiprone tablets.     

Chemisorption of proteins and their thiol derivatives onto gold surfaces: characterization based on electrochemical nonlinearity

This study was conducted to monitor the electrochemical responses of two proteins (bovine serum albumin (BSA) and gelatin) and their thiol derivatives adsorbed onto gold (Au) electrodes, which were analyzed by a "nonlinear" impedance method. A sinusoidal voltage is applied to a protein-containing aqueous solution and the waveform of the output current is analyzed by fast Fourier transformation (FFT). The intensities of the higher harmonics in the FFT varied with the species of protein and their thiol derivatives, and with time. From the higher harmonics, voltage-dependent capacitance and conductance were quantitatively evaluated to differentiate the state of adsorbed protein. Adsorption and desorption characteristics of BSA and its thiol derivative on the Au surface were continuously measured by a quartz crystal microbalance (QCM) in situ. The microscopic state of thiol-derivatized BSA adsorbed onto the Au surface was imaged by atomic force microscopy (AFM). In general, thiol-derivatized proteins were tightly adsorbed on the Au surface and showed no desorption. The present electrochemical measurements clearly differentiated adsorption characteristics of physically adsorbed (physisorbed) and chemically adsorbed (chemisorbed) proteins on Au surfaces.     

Optimisation of an asymmetric polymerase chain reaction assay for the amplification of single-stranded DNA from Wuchereria bancrofti for electrochemical detection

Single-stranded DNA (ssDNA) is a prerequisite for electrochemical sensor-based detection of parasite DNA and other diagnostic applications. To achieve this detection, an asymmetric polymerase chain reaction method was optimised. This method facilitates amplification of ssDNA from the human lymphatic filarial parasite Wuchereria bancrofti. This procedure produced ssDNA fragments of 188 bp in a single step when primer pairs (forward and reverse) were used at a 100:1 molar ratio in the presence of double-stranded template DNA. The ssDNA thus produced was suitable for immobilisation as probe onto the surface of an Indium tin oxide electrode and hybridisation in a system for sequence-specific electrochemical detection of W. bancrofti. The hybridisation of the ssDNA probe and target ssDNA led to considerable decreases in both the anodic and the cathodic currents of the system''s redox couple compared with the unhybridised DNA and could be detected via cyclic voltammetry. This method is reproducible and avoids many of the difficulties encountered by conventional methods of filarial parasite DNA detection; thus, it has potential in xenomonitoring.     

Poly(methyl metacrylate) conductive fiber optic transducers as dual biosensor platforms

Herein the development of an alternative optic-conductive fiber configuration applied for the construction of biosensing platforms. This new approach is based on applying the chemical polymerization of pyrrole onto the surface of polymethyl metacrylate (PMMA) fibers to create a polymer—a conductive surface, onto which an additional photoactive polypyrrole-benzophenone (PpyBz) film is electrochemically generated upon the fiber surface. Irradiation of the benzophenone groups embedded in the Ppy films with UV radiation (350 nm) formed active radicals that allowed the covalent attachment of the desired bioreceptors. Characterization of the amperometric biosensing matrix was accomplished by using a model Urease (Urs) through electrochemical impedance spectroscopy (EIS) and amperometry. Both techniques have shown a low charge transfer resistance (340 kΩ) and a high sensitivity (12.3 μA mM⁻¹ cm⁻²). Thereafter, the construction of an optical biosensing matrix based on horseradish peroxidase (HRP) production of photons was carried out. The high signal to noise (S/N) ratio (1600) indicated clearly that this approach can serve as a new platform to replace glass optical fibers based on biosensors.     

Increase in the effectiveness of microbial absorption on activated charcoal upon sorbent polarization

The effect of Staphylococcus albus and the contact time on hydrolytic adsorption of ions on activated charcoal SKN-2K in the physiological solution (0.9% NaCl) was investigated. Experiments were performed without polarization or with cathodic and anodic polarization of the adsorbent. The adsorbed microorganisms decreased the rate of electrolyte ion adsorption, especially in case of cathodic polarization. When activate charcoal was at negative potential (-0.2 V), up to 95% of active microorganisms was adsorbed at the initial concentration of 5.75.10(6) microorganisms per ml, while in case of anodic polarization only 43-44% of microorganisms was adsorbed.     

A Practical Anodic and Cathodic Curve Intersection Model to Understand Multiple Corrosion Potentials of Fe-Based Glassy Alloys in OH- Contained Solutions

A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curve and an imaginary cathodic line, was proposed to explain multiple corrosion potentials occurred in potentiodynamic polarization curves of Fe-based glassy alloys in alkaline solution. The apparent anodic curve was selected from the measured anodic curves. The imaginary cathodic line was obtained by linearly fitting the differences of anodic curves and can be moved evenly or rotated to predict the number and value of corrosion potentials.     

Enhancement of analyte ionization in desoprtion/ionization on porous silicon (DIOS)-mass spectrometry (MS)

Desorption/ionization on silicon mass spectrometry (DIOS-MS) is a relatively new laser desorption/ionization technique for mass spectrometry without employing an organic matrix. This present study was carried to survey the experimental factors to improve the efficiency of DIOS-MS through electrochemical etching condition in structure and morphological properties of the porous silicon. The porous structure of silicon structure and its properties are crucial for the better performance of DIOS-MS and they can be controlled by the suitable selection of electrochemical conditions. The fabrication of porous silicon and ion signals on DIOS-MS were examined as a function of silicon orientation, etching time, etchant, current flux, irradiation, pore size, and pore depth. We have also examined the effect of pre- and post-etching conditions for their effect on DIOS-MS. Finally, we could optimize the electrochemical conditions for the efficient performance of DIOS-MS in the analysis of small molecule such as amino acid, drug and peptides without any unknown noise or fragmentation.     

Electrochemical impedance spectroscopy for study of amyloid beta-peptide interactions with (-) nicotine ditartrate and (-) cotinine

Immobilization of amyloid beta (Abeta) (1-40) peptide on Au-colloid modified gold electrodes has been studied. Colloidal Au was self-assembled onto gold electrodes through the thiol groups of 1,6-hexanedithiol monolayer. Next, buffered aqueous solution of Abeta (1-40) peptide existing in the beta-sheet structure in the acidic media was dropped on the electrode surface. Each step of electrode modification has been confirmed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The changes of the resistance of the layer with deposited Abeta (1-40) peptide, occurred under stimulation by different concentration of (-) nicotine ditartrate and (-) cotinine were measured with EIS and were used for the calculation of association constants. The gentle measuring conditions applied in electrochemical impedance spectroscopy, together with suitable environment for biomolecules immobilization created by Au-colloid, might be recommended as the analytical tool for assessing the effectiveness of potential drugs used in Alzheimer's disease (AD) therapy.     

Electrochemical immunoanalysis of cardiac myoglobin

Methods of myoglobin determination based on electrochemical analysis by means of analysis of electrochemical parameters of modified electrodes have been proposed. The method of direct detection is based on interaction of myoglobin with anti-myoglobin with subsequent electrochemical registration of this hemoprotein. The electrode surface was modified by a membrane-like synthetic didodecyldimethylammonium bromide (DDAB), gold nanoparticles and antibodies to human cardiac myoglobin the electrochemical reduction of myoglobin heme was registered provided that the antigen (myoglobin) was present in the samples. The reaction of myoglobin binding to antibodies immobilized on the electrode surface was also registered using electrochemical impedance spectroscopy. The study of electro analytical characteristics revealed high specificity and sensitivity of the developed method. The biosensor was characterized by low detection limit and a high working range of the detected concentrations from 17.8 to 1780 ng/ml (from 1 to 100 nM). The method of myoglobin determination based on a signal of gold nanoparticles has also been proposed. The signal was detected with stripping voltammetry. There was a change in the cathodic peak area and the peak height of gold oxide reduction for the electrodes with antibodies and the electrodes with the antibody-myoglobin complex.     

Impedimetric nanoimmunosensor platform for aflatoxin B1 detection in peanuts

This article developed a novel electrochemical immunosensor for the specific detection of aflatoxin B1 (AFB1). Amino-functionalized iron oxide nanoparticles (Fe₃O₄-NH₂) were synthesized. Fe₃O₄-NH₂ were chemically bound on self-assembly monolayers (SAMs) of mercaptobenzoic acid (MBA). Finally, polyclonal antibodies (pAb) were immobilized on Fe₃O₄-NH₂-MBA. The sensor system was evaluated through atomic force microscopy (AFM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). A reduction in the anodic and cathodic peak currents was observed after the assembly of the sensor platform. The charge transfer resistance (R_ct) was increased due to the electrically insulating bioconjugates. Then, the specific interaction between the sensor platform and AFB1 blocks the electron transfer of the [Fe(CN)₆]^3−/4− redox pair. The nanoimmunosensor showed a linear response range estimated from 0.5 to 30 μg/mL with a limit of detection (LOD) of 9.47 μg/mL and a limit of quantification (LOQ) of 28.72 μg/mL for AFB1 identification in a purified sample. In addition, a LOD of 3.79 μg/mL, a LOQ of 11.48 μg/mL, and a regression coefficient of 0.9891 were estimated for biodetection tests on peanut samples. The proposed immunosensor represents a simple alternative, successfully applied in detecting AFB1 in peanuts, and therefore, represents a valuable tool for ensuring food safety.     

Differences in Caco-2 cell attachment, migration on collagen and fibronectin coated polyelectrolyte surfaces

Metastasis mechanisms depend on cell metabolism changes, migration and adhesion to different tissues. To understand their choice of interaction site, the tumoral cell adhesion to model surfaces was studied. The response of Caco-2 tumoral cells cultured on polyelectrolyte film-functionalized surfaces with or without adhesion proteins (fibronectin or collagen IV) was analyzed. Using the layer-by- layer method, multilayer films were prepared with cationic poly(allylamine hydrochloride) and anionic poly(sodium 4-styrenesulfonate) polyelectrolytes. Film surface wettability was evaluated. The electrochemical impedance spectroscopy analyses were carried out to control the elaborated surfaces on which Caco-2 tumoral cells were cultured. The cell velocity was studied by video-microscopy and a cell colorimetric assay (WST-1) was used to quantify cell viability. The film surface parameters as well as the protein nature and localization in the film were found to modulate cell response. Results demonstrated that the cancer cell motility and proliferation were higher when cultured onto pure collagen located above the polyelectrolyte film and that the reverse surprisingly was observed when proteins were inserted into the polyelectrolyte film. Data also showed that cell motility was correlated with a high charge transfer resistance (Rct) and a low surface free energy (SFE) polar component (electron donor character). This relationship was valid only for pure external proteins. Thus, fibronectin exhibited a low Rct and a high SFE polar component, which decreased cell motility and proliferation.     

Electrochemical reactions of horse heart cytochrome c at graphite electrodes

The interaction of cytochrome c with a paraffin-wax-impregnated spectroscopic graphite electrode (WISGE) was studied in a medium consisting of 0.1 M potassium phosphate, pH 7.0, by means of differential pulse and cyclic voltammetry. Ferricytochrome c yields on voltammograms a single cathodic peak C around a potential of -0.3 V (vs. Ag/AgCl) and two anodic peaks AI and AII around the potentials of 0.66 and 0.89 V, respectively. Cathodic peak C corresponds to a catalytic reaction during which ferricytochrome c is reduced to ferrocytochrome c: ferricytochrome c is then regenerated by chemical oxidation of ferrocytochrome c by oxygen adsorbed at the WISGE surface. The first, more negative anodic peak AI corresponds to anodic electrochemical oxidation of tyrosine residues, whereas the second, more positive anodic peak (peak AII) corresponds to an anodic reaction of haemin. Voltammetry at a WISGE may provide a valuable technique for obtaining data about cytochrome c properties on electrically charged surface.     

Advanced Composite 2D Energy Materials by Simultaneous Anodic and Cathodic Exfoliation

Composite materials based on graphene and other 2D materials are of considerable interest in the fields of catalysis, electronics, and energy conversion and storage because of the unique structural features and electronic properties of each component and the synergetic effects brought about by the compositing. Approaches to the mass production of 2D materials and their composites in a facile and affordable way are urgently needed to enable their implementation in practical applications. Here a novel electrochemical exfoliation approach to prepare 2D composites is proposed, which combines simultaneous anodic exfoliation of graphite and cathodic exfoliation of other 2D materials (namely MoS₂, MnO₂, and graphitic carbon nitride). The synthesis is carried out in a single‐compartment electrochemical cell to in situ produce functional 2D composite materials. Applications of the as‐prepared 2D composites are demonstrated as (i) effective hydrogen evolution catalysts and (ii) supercapacitor electrode materials. The method enables the compositing of semiconductive, or even insulating, 2D materials with conductive graphene in an easy, cheap, ecofriendly, yet efficient way, liberating the intrinsic functions of 2D materials, which are usually hindered by their poor conductivity. The method is believed to be widely applicable to the family of 2D materials.     

多孔硅适配子生物传感器的电化学研究

构建1种用于快速检测四环素的新型电化学纳米多孔硅(PS)生物传感器。通过脉冲腐蚀法制得多孔硅基片,将适配子固定于其上,这种四环素适配子能够特异性识别四环素分子,并引起阻抗值的变化。利用电化学交流阻抗法比较固定适配子前后硅片表面阻抗值的变化,以及在体系中加入不同浓度四环素后阻抗谱的变化。选择1个合适的等效电路对测得的阻抗数据进行拟合,获得了四环素浓度与阻抗值的变化规律。传感器的线性检测范围为2.079~62.37 nmol/L,检测限为2.079 7 nmol/L。     

Label-free impedance detection of oligonucleotide hybridisation on interdigitated ultramicroelectrodes using electrochemical redox probes

The direct detection of oligodeoxynucleotide (ODN) hybridisation using electrochemical impedance spectroscopy was made on interdigitated array (IDA) gold (Au) ultramicroelectrodes manufactured by silicon technology. The immobilisation of single stranded ODNs (ssODNs) was accomplished by self-assembling of thiol-modified ODNs onto an Au-electrode surface. Faradaic impedance was measured in the presence of K(3)[Fe(CN)(6)]. Double strand formation was identified by a decrease of approximately 50% in impedance in the low frequency region in the presence of K(3)[Fe(CN)(6)], compared to the spectrum of single stranded ODN. The frequency dependent diffusion of Fe(CN)(6)(3-) ions through defects in the ODN monolayer determines the impedance of Au-ssODN surface. The influence of DNA intercalator methylene blue on the impedance of both, single and double strands, was examined along with K(3)[Fe(CN)(6)] and confirmed by cyclic voltammetry. The layer densities and the hybridisation have been further corroborated by chronoamperometric redox recycling of para-aminophenol (p-AP) in ELISA like experiments. It can be concluded, that a performed impedance spectroscopy did not change the layer density. The impedance spectroscopy at ultramicroelectrodes combined with faradaic redox reactions enhances the impedimetric detection of DNA hybridisation on IDA platforms.