4',6-Diamidino-2-phenylindole, a fluorescent probe for tubulin and microtubules

A new fluorophor for tubulin which has permitted the monitoring of microtubule assembly in vitro is reported. DAPI (4',6-diamidino-2-phenylindole), a fluorophor already known as a DNA intercalator, was shown to bind specifically to a unique tubulin site as a dimer (KD(app) = 43 +/- 5 microM at 37 degrees C) or to tubulin associated in microtubules (KD(app) = 6 +/- 2 microM at 37 degrees C) with the same maximum enhancement in fluorescence. When tubulin polymerization was induced with GTP, the change in DAPI affinity for tubulin resulted in an enhancement of DAPI binding and, consequently, of fluorescence intensity. DAPI, whose binding site is different from that of colchicine, vinblastine, or taxol, did not interfere greatly with microtubule polymerization. It induced a slight diminution of the critical concentration for tubulin assembly due to a decrease in the depolymerizing rate constant. Moreover, DAPI did not interfere with GTP hydrolysis correlated with tubulin polymerization, but it decreased the GTPase activity at the steady state of tubulin assembly. Even at substoichiometric levels DAPI can be used to follow the kinetics of microtubule assembly.     

Regeneration of mirror symmetrical limbs in the axolotl

Measurements of tubulin exchange into and from bovine brain microtubules at steady state in vitro were made with 3H-GTP as a marker for tubulin addition to or loss from microtubules. Tubulin has an exchangeable GTP binding site that becomes nonexchangeable in the microtubule. We found that tubulin addition to and loss from microtubules under steady state conditions occurred at equivalent rates, that loss and gain were linear, and that exchange rates (percentage of total tubulin in microtubules lost or gained per hour) were dependent upon microtubule length. Furthermore, we found that podophyllotoxin blocked steady state assembly, but did not alter the rate of steady state tubulin loss. When the assembling microtubule end was pulsed with 3H-GTP at steady state, the label was almost completely retained during a subsequent chase. We conclude that the microtubule assembly-disassembly "equilibrium" is a steady state summation of two different reactions which occur at opposite ends of the microtubule, and that assembly and disassembly occur predominantly and perhaps exclusively at the opposite ends under steady state conditions in vitro.     

Regulation of the microtubule steady state in vitro by ATP.

ATP increases microtubule steady state assembly and disassembly rates in vitro in a concentration-dependent manner. Bovine brain microtubules, composed of 75% tubulin and 25% high molecular weight microtubule-associated proteins (MAPs), were purified by three cycles of assembly and disassembly in the absence of ATP. When assembled to steady state, these microtubules add dimers at one end and lose them at the other in a unidirectional assembly-disassembly process. In the presence of 1.0 mM ATP the unidirectional flow of tubulin from one end of the microtubules to the other increases as much as 20 fold, as revealed by loss of 3H-GTP from uniformly labeled microtubules under GTP chase conditions and by the rate of disassembly following addition of 50 microM podophyllotoxin. UTP, CTP and 5' adenylylimidodiphosphate (AMP-PNP) cannot substitute for ATP in producing this effect. Furthermore, the increase in steady state flow rate persists afer ATP is removed. Thus microtubules assembled in ATP and centrifuged through sucrose cushions to separate them from nucleotides continue to exhibit increased rates in the next assembly cycle in the absence of ATP. It is possible that an ATP-dependent microtubule protein kinase is responsible for the observed increase in tubulin flow rate. A kinase activity associated with brain MAPs has been reported to be cAMP-dependent (Sloboda et al., 1975). We have found an adenylate cyclase activity associated with these microtubules. Whether the adenylate cyclase is a contaminant or due to a specific microtubules-associated protein, and whether its activity is functionally linked to the increased rate of assembly and disassembly in the presence of ATP, remain to be determined.     

Effect of tubulin self-association on GTP hydrolysis and nucleotide exchange reactions

We investigated how the self-association of isolated tubulin dimers affects the rate of GTP hydrolysis and the equilibrium of nucleotide exchange. Both reactions are relevant for microtubule (MT) dynamics. We used HPLC to determine the concentrations of GDP and GTP and thereby the GTPase activity of SEC-eluted tubulin dimers in assembly buffer solution, free of glycerol and tubulin aggregates. When GTP hydrolysis was negligible, the nucleotide exchange mechanism was studied by determining the concentrations of tubulin-free and tubulin-bound GTP and GDP. We observed no GTP hydrolysis below the critical conditions for MT assembly (either below the critical tubulin concentration and/or at low temperature), despite the assembly of tubulin 1D curved oligomers and single-rings, showing that their assembly did not involve GTP hydrolysis. Under conditions enabling spontaneous slow MT assembly, a slow pseudo-first-order GTP hydrolysis kinetics was detected, limited by the rate of MT assembly. Cryo-TEM images showed that GTP-tubulin 1D oligomers were curved also at 36 °C. Nucleotide exchange depended on the total tubulin concentration and the molar ratio between tubulin-free GDP and GTP. We used a thermodynamic model of isodesmic tubulin self-association, terminated by the formation of tubulin single-rings to determine the molar fractions of dimers with exposed and buried nucleotide exchangeable sites (E-sites). Our analysis shows that the GDP to GTP exchange reaction equilibrium constant was an order-of-magnitude larger for tubulin dimers with exposed E-sites than for assembled dimers with buried E-sites. This conclusion may have implications on the dynamics at the tip of the MT plus end.     

Role of DAPI in microtubule reactions at steady-state

The new fluorophor for tubulin, DAPI, is shown to bind to a site different from the exchangeable nucleotide binding site (E site) and to inhibit GTP hydrolysis by the tubulin-colchicine complex within an uncompetitive scheme. Moreover the dissociation rate constant of tubulin for microtubule ends at 32 degrees C was found largely decreased in the presence of saturating amounts of the probe while the association rate constant was little affected. These data on the kinetic parameters of tubulin interactions in the presence of DAPI, together with the inhibition of GTP hydrolysis by microtubules at the steady state are understood as the main cause for microtubule stabilization at steady-state by DAPI.     

Intrinsically slow dynamic instability of HeLa cell microtubules in vitro

The dynamic behavior of mammalian microtubules has been extensively studied, both in living cells and with microtubules assembled from purified brain tubulin. To understand the intrinsic dynamic behavior of mammalian nonneural microtubules, we purified tubulin from cultured HeLa cells. We find that HeLa cell microtubules exhibit remarkably slow dynamic instability, spending most of their time in an attenuated state. The tempered dynamics contrast sharply with the dynamics of microtubules prepared from purified bovine brain tubulin under similar conditions. In accord with their minimal dynamic instability, assembled HeLa cell microtubules displayed a slow treadmilling rate and a low guanosine-5'-triphosphate hydrolysis rate at steady state. We find that unlike brain tubulin, which consists of a heterogeneous mixture of beta-tubulin isotypes (beta(II), beta(III), and beta(IV) and a low level of beta(I)), HeLa cell tubulin consists of beta(I) tubulin ( approximately 80%) and a minor amount of beta(IV) tubulin ( approximately 20%). The slow dynamic behavior of HeLa cell microtubules in vitro differs strikingly from the dynamic behavior of microtubules in living cultured mammalian cells, supporting the idea that accessory factors create the robust dynamics that occur in cells.     

Mechanism of the microtubule GTPase reaction

The rate of GTP hydrolysis by microtubules has been measured at tubulin subunit concentrations where microtubules undergo net disassembly. This was made possible by using microtubules stabilized against disassembly by reaction with ethylene glycol bis-(succinimidylsuccinate) (EGS) as sites for the addition of tubulin-GTP subunits. The tubulin subunit concentration was varied from 25 to 90% of the steady state concentration, and there was no net elongation of stabilized microtubule seeds. The GTPase rate with EGS microtubules was linearly proportional to the tubulin-GTP subunit concentration when this concentration was varied by dilution and by using GDP to compete with GTP for the tubulin E-site. The linear dependence of the rate is consistent with a GTP mechanism in which hydrolysis is coupled to the tubulin-GTP subunit addition to microtubule ends. It is inconsistent with reaction schemes in which: microtubules are capped by a single tubulin-GTP subunit, which hydrolyzes GTP when a tubulin-GTP subunit adds to the end; hydrolysis occurs primarily in subunits at the interface of a tubulin-GTP cap and the tubulin-GDP microtubule core; hydrolysis is not coupled to subunit addition and occurs randomly in subunits in a tubulin-GTP cap. It was also found that GDP inhibition of the microtubule GTPase rate results from GDP competition for GTP at the tubulin subunit E-site. There is no additional effect of GDP on the GTPase rate resulting from exchange into tubulin subunits at microtubule ends.     

Changes in the hydrodynamic properties of microtubules induced by taxol

Microtubule assembly was followed and monitored by (1) the turbidity at 350 nm, (2) the weight of the pelleted microtubules, (3) linear dichroism, LD tau, of the turbidity upon flow orientation, (4) the specific viscosity, eta spec, and (5) electron microscopy. These five methods showed the same features for normal microtubule assembly, but were different in the presence of taxol, a drug which binds to tubulin. The The apparent steady state of microtubule assembly in the presence of taxol as found by turbidity or the weight of pelleted polymer did not represent a stable state, as both LD tau and eta spec continued to change for a much longer time. Microtubules assembled in the presence of taxol from microtubule proteins as well as from purified tubulin were difficult to orient, as high flow gradients were needed and the maximal LD tau value represented only 20% of the LD tau for normal microtubules. In contrast to the slow relaxation of normal microtubules, rapid relaxation to random orientation was found in the presence of taxol. Low orientability was also indicated by electron micrographs, in which pelleted microtubules were seen to be randomly oriented in the presence of taxol. Taxol induced a very high eta spec, 4-times the steady-state value in the initial phase of assembly, which slowly declined again to a steady state, an effect which was also found for assembly of purified tubulin assembled in the absence of the microtubule-associated proteins. The presence of taxol did not change the relative amount and composition of the microtubule-associated proteins in the assembled microtubules. The results therefore suggest that taxol alters the hydrodynamic properties of the microtubules due to its interaction with tubulin and that this alteration is not an effect of the microtubule-associated proteins.     

Direct observation of steady-state microtubule dynamics

Different types of unusual dynamic behavior have been reported for steady-state microtubules. While almost all earlier reports relied on kinetic measurements of bulk polymerization, we have directly visualized the steady-state addition of subunits to individual microtubules through the use of tubulin derivitized with biotin. Biotinylated tubulin was used both as an internal "seed" for polymerization and as a marker for assembly onto the ends of microtubules composed of purified tubulin. Biotinylated segments were distinguished from unmodified tubulin by double-label immunofluorescence. Microtubule lengths, number concentrations, and segment lengths have been monitored with time at steady state under two buffer conditions. The results indicate that the microtubule steady state under these conditions is a balance between a majority of slowly growing microtubules and a minority of rapidly depolymerizing ones as described by the "dynamic instability" model (Mitchison T., and M. Kirschner, 1984, Nature (Lond.)., 312:232-242). Microtubules show no evidence of treadmilling; instead most show progressive growth off both ends at steady state. Although solvent conditions markedly influence the growth rates, qualitatively the behavior is unchanged.     

Stoichiometry and role of GTP hydrolysis in bovine neurotubule assembly

A method is given for preparing tubulin with 1 mol of exchangeably bound [gamma-32P]GTP/mol of 6 S dimer. Bovine tubulin is shown to hydrolyze 1 mol of GTP/mol of 6 S dimer added to assembling microtubules at 37 degrees. Hydrolysis and assembly occur at the same rate and to the same extent. When microtubule-associated proteins (MAPs) are removed, both hydrolysis and assembly fail to occur. Readdition of the MAPs restores both activities. Tubulin with exchangeable GDP will co-assemble with GTP.tubulin even at equimolar levels. Exchangeability is demonstrated by pulse-chase experiments with GDP or GTP. GDP is also a potent inhibitor of assembly under these conditions, and the rate of assembly is reduced by 50% at 10 micron GDP. One mole of inorganic phosphate is released to the solvent per mole of exchangeable GTP hydrolyzed. An assembly mechanism is proposed in which exchangeable GTP is hydrolyzed without intermediate transphosphorylation of nonexchangeable GDP.     

Differentiation between dynamic instability and end-to-end annealing models for length changes of steady-state microtubules

Short microtubules can be formed by shearing a sample at polymerization steady state of microtubules formed by glycerol-induced assembly of pure tubulin dimer. Such short microtubules show a rapid increase in mean length. The rate of this increase is too fast to be accounted for by statistical redistribution of subunits between microtubules. We propose that the fast length changes are a result of the end-to-end annealing of microtubules demonstrated by Rothwell et al. (Rothwell, S. W., Grasser, W. A., and Murphy, D. B. (1986) J. Cell Biol. 102, 619-627). This proposal has been tested by measuring the rate of annealing of free microtubules to Tetrahymena axonemes under conditions identical to those used for the lengthening of sheared microtubules. That free microtubules anneal to axonemal microtubules is indicated by the following observations. Axonemes elongate at both ends in the presence of steady state microtubules, as predicted for a symmetrical annealing process; under conditions where the microtubule number concentration is greater than that for axonemes, the initial rate of axoneme elongation is more rapid with a low concentration of long microtubules at steady state than with a high number concentration of short microtubules at steady state. These observations are inconsistent with the predictions of a model based on microtubule dynamic instability (Mitchison, T., and Kirschner, M. (1984) Nature 312, 237-242). The annealing rate observed with axonemes can account for the rate of elongation of sheared steady state microtubules.     

Rate-limiting guanosine 5'-triphosphate hydrolysis during nucleotide turnover by FtsZ, a prokaryotic tubulin homologue involved in bacterial cell division

FtsZ is a prokaryotic tubulin homologue that polymerizes into a dynamic ring during cell division. GTP binding and hydrolysis provide the energy for FtsZ dynamics. However, the precise role of hydrolysis in polymer assembly and turnover is not understood, limiting our understanding of how FtsZ functions in the cell. Here we investigate GTP hydrolysis during the FtsZ polymerization cycle using several complementary approaches that avoid technical caveats of previous studies. We find that at steady state approximately 80% of FtsZ polymer subunits are bound to GTP. In addition, we use pre-steady-state, single turnover assays to directly measure the rate of hydrolysis. Hydrolysis was found to occur at approximately 8/min and to be a rate-limiting step in GTP turnover; phosphate release rapidly followed. These results clarify previously conflicting results in the literature and suggest that pure FtsZ polymers, unlike microtubules, may not be able to undergo dynamic instability or to store energy in the polymer for force production.     

Stimulation of Tubulin-Dependent ATPase Activity in Microtubule Proteins from Porcine Brain by Taxol

Taxol, an antimitotic agent that induces microtubule assembly, stimulated tubulin-dependent Mg2+-ATPase activity of microtubule-associated proteins (MAPs). A concentration-dependent increase in the rate of ATP hydrolysis was observed. Taxol acted through its binding to the tubulin molecule on MAP ATPase, and maximal stimulation, which was found at approximately equal concentrations of taxol and tubulin, reached about 140% of the original level in the absence of taxol. Taxol enhanced ATP hydrolysis by a mixture of MAPs and tubulin, and this continued at a steady linear rate even when the polymerization had approached a plateau. In the presence of taxol, a large portion of ATPase activity and protein was recovered in the pellet after centrifugation at 70,000 g for 60 min at 25 degrees C. Both colchicine and podophyllotoxin inhibited taxol-stimulated ATPase activity via the same mechanism by which they inhibited taxol-induced microtubule polymerization. The stimulation by taxol was not found in the presence of Ca2+ alone but required Mg2+. We conclude that tubulin effectively stimulates Mg2+-ATPase activity of MAPs under conditions that induce tubulin polymerization.     

Kinetic analysis of tubulin exchange at microtubule ends at low vinblastine concentrations

We have investigated the effects of vinblastine at micromolar concentrations and below on the dynamics of tubulin exchange at the ends of microtubule-associated-protein-rich bovine brain microtubules. The predominant behavior of these microtubules at polymer-mass steady state under the conditions examined was tubulin flux, i.e., net addition of tubulin at one end of each microtubule, operationally defined as the assembly or A end, and balanced net loss at the opposite (disassembly or D) end. No dynamic instability behavior could be detected by video-enhanced dark-field microscopy. Addition of vinblastine to the microtubules at polymer-mass steady state resulted in an initial concentration-dependent depolymerization predominantly at the A ends, until a new steady-state plateau at an elevated critical concentration was established. Microtubules ultimately attained the same stable polymer-mass plateau when vinblastine was added prior to initiation of polymerization as when the drug was added to already polymerized microtubules. Vinblastine inhibited tubulin exchange at the ends of the microtubules at polymer-mass steady state, as determined by using microtubules differentially radiolabeled at their opposite ends. Inhibition of tubulin exchange occurred at concentrations of vinblastine that had very little effect on polymer mass. Both the initial burst of incorporation that occurs in control microtubule suspensions following a pulse of labeled GTP and the relatively slower linear incorporation of label that follows the initial burst were inhibited in a concentration-dependent manner by vinblastine. Both processes were inhibited to the same extent at all vinblastine concentrations examined. If the initial burst of label incorporation represents a low degree of dynamic instability (very short excursions of growth and shortening of the microtubules at one or both ends), then vinblastine inhibits both dynamic instability and flux to similar extents. The ability of vinblastine to inhibit tubulin exchange at microtubule ends in the micromolar concentration range appeared to be mediated by the reversible binding of vinblastine to tubulin binding sites exposed at the polymer ends. Determination by dilution analysis of the effects of vinblastine on the apparent dissociation rate constants for tubulin loss at opposite microtubule ends indicated that a principal effect of vinblastine is to decrease the dissociation rate constant at A ends (i.e., it produces a kinetic cap at A ends), whereas it has no effect on the D-end dissociation rate constant.     

The conversion of tubulin carboxyl groups to amides has a stabilizing effect on microtubules.

In a recent study, we demonstrated that the conversion of carboxyl residues in the C-termini of tubulin to neutral amides with glycine ethyl ester enhanced the ability of the protein to assemble into microtubules and decreased its interaction with microtubule-associated proteins (MAPs). In this work, we investigated the effects of carboxyl modification on the dynamic behavior of microtubules at polymer mass steady state. After steady state, microtubules assembled from unmodified tubulin were sheared, and the mean polymer lengths decreased to 5 microns and then increased to 29 microns within 130 min. In contrast, lengths of sheared microtubules polymerized from tubulin containing 23 modified carboxyl groups increased by only 2-fold. Stabilization of polymer lengths was also observed directly by video-enhanced light microscopy of microtubules grown off of axonemes. Rapid shortening was seen in microtubules composed of unmodified but not modified tubulin. Further evidence for the less dynamic behavior of microtubules as a result of carboxyl modification was obtained from kinetic studies of the elongation phase during assembly which showed a 3-fold lower off-rate constant, k-, for modified microtubules. Another effect of the modification was a 12-fold reduction in the steady-state rate constant for GTP hydrolysis (165 s-1 for unmodified and 14 s-1 for modified). These results suggest that reduction of the negative charges in the C-termini by modification of the acidic residues stabilizes microtubules against depolymerization. MAPs may stabilize microtubules in an analogous manner.     

Polymerization of Ftsz, a bacterial homolog of tubulin. is assembly cooperative?

FtsZ is a bacterial homolog of tubulin that is essential for prokaryotic cytokinesis. In vitro, GTP induces FtsZ to assemble into straight, 5-nm-wide polymers. Here we show that the polymerization of these FtsZ filaments most closely resembles noncooperative (or "isodesmic") assembly; the polymers are single-stranded and assemble with no evidence of a nucleation phase and without a critical concentration. We have developed a model for the isodesmic polymerization that includes GTP hydrolysis in the scheme. The model can account for the lengths of the FtsZ polymers and their maximum steady state nucleotide hydrolysis rates. It predicts that unlike microtubules, FtsZ protofilaments consist of GTP-bound FtsZ subunits that hydrolyze their nucleotide only slowly and are connected by high affinity longitudinal bonds with a nanomolar K(D).     

Dilution of individual microtubules observed in real time in vitro: evidence that cap size is small and independent of elongation rate

Although the mechanism of microtubule dynamic instability is thought to involve the hydrolysis of tubulin-bound GTP, the mechanism of GTP hydrolysis and the basis of microtubule stability are controversial. Video microscopy of individual microtubules and dilution protocols were used to examine the size and lifetime of the stabilizing cap. Purified porcine brain tubulin (7-23 microM) was assembled at 37 degrees C onto both ends of isolated sea urchin axoneme fragments in a miniature flow cell to give a 10-fold variation in elongation rate. The tubulin concentration in the region of microtubule growth could be diluted rapidly (by 84% within 3 s of the onset of dilution). Upon perfusion with buffer containing no tubulin, microtubules experienced a catastrophe (conversion from elongation to rapid shortening) within 4-6 s on average after dilution to 16% of the initial concentration, independent of the predilution rate of elongation and length. Based on extrapolation of catastrophe frequency to zero tubulin concentration, the estimated lifetime of the stable cap after infinite dilution was less than 3-4 s for plus and minus ends, much shorter than the approximately 200 s observed at steady state (Walker, R. A., E. T. O'Brien, N. K. Pryer, M. Soboeiro, W. A. Voter, H. P. Erickson, and E. D. Salmon. 1988. J. Cell Biol. 107:1437-1448.). We conclude that during elongation, both plus and minus ends are stabilized by a short region (approximately 200 dimers or less) and that the size of the stable cap is independent of 10-fold variation in elongation rate. These results eliminate models of dynamic instability which predict extensive "build-up" stabilizing caps and support models which constrain the cap to the elongating tip. We propose that the cell may take advantage of such an assembly mechanism by using "catastrophe factors" that can promote frequent catastrophe even at high elongation rates by transiently binding to microtubule ends and briefly inhibiting GTP-tubulin association.     

Taxol assembles tubulin in the absence of exogenous guanosine 5'-triphosphate or microtubule-associated proteins

Taxol increases the rate and extent of microtubule assembly in vitro and stabilizes microtubules in vitro and in cells [Schiff, P. B., Fant, J., & Horwitz, S. B. (1979) Nature (London) 277, 665-667; Schiff, P. B., & Horwitz, S. B. (1980) Proc. Natl. Acad. Sci. U.S.A. 77, 1561-1565]. We report herein that taxol has the ability to promote microtubule assembly in the absence of microtubule-associated proteins, rings, and added guanosine 5'-triphosphate (GTP or organic buffer. The drug enhances additional microtubule assembly when added to microtubules at apparent steady state. This additional assembly can be attributed to both elongation of existing microtubules and spontaneous nucleation of new microtubules. Taxol-treated microtubules have depressed dissociation reactions as determined by dilution experiments. The drug does not inhibit the binding of GTP or the hydrolysis of GTP or guanosine 5'-diphosphate (GDP) in our microtubule protein preparations. Taxol does not competitively inhibit the binding of colchicine to tubulin.     

On the role of the tubulin nonexchangeable GTP site in bovine neurotubule assembly.

A procedure for radiolabeling the terminal phosphoryl group of the tubulin nonexchangeable GTP site using bacterial acetate kinase and acetyl-32P is described. Warming such samples to 37 degrees results in microtubule assembly and hydrolysis of the nonexchangeable site GTP in a parallel fashion. Removal of the microtubule-associated protein fraction from lebeled tubulin prevents hydrolysis and assembly, and recombination of these components restores both processes again in a parallel fashion. These and other experiments indicate that the nonexchangeable site GTP hydrolysis and assembly are intimately linked. The experiments also demonstrate that GRP is not required at the exchangeable nucleotide site for assembly to occur.     

Role of GTP hydrolysis in microtubule polymerization: evidence for a coupled hydrolysis mechanism

The relationship between GTP hydrolysis and microtubule assembly has been investigated by using a rapid filtration method. Microtubules assembled from phosphocellulose-purified tubulin, double-labeled with [gamma-32P]- and [3H]GTP, were trapped and washed free of unbound nucleotide on glass fiber filters. The transient accumulation of microtubule-bound GTP predicted by uncoupled GTP hydrolysis models [Carlier & Pantaloni (1981) Biochemistry 20, 1918-1924; Carlier et al. (1987) Biochemistry 26, 4428-4437] during the rapid assembly of microtubules was not detectable under our experimental conditions. By calculating hypothetical time courses for the transient accumulation of microtubule-bound GTP, we demonstrate that microtubule-bound GTP would have been detectable even if the first-order rate constant for GTP hydrolysis were 4-5 times greater than the pseudo-first-order rate constant for tubulin subunit addition to microtubules. In a similar manner, we demonstrate that if GTP hydrolysis were uncoupled from microtubule assembly but were limited to the interface between GTP subunits and GDP subunits (uncoupled vectorial hydrolysis), then microtubule-bound GTP would have been detectable if GTP hydrolysis became uncoupled from microtubule assembly at less than 50 microM free tubulin, 5 times the steady-state tubulin concentration of our experimental conditions. In addition, during rapid microtubule assembly, we have not detected any microtubule-bound Pi, which has been proposed to form a stabilizing cap at the ends of microtubules [Carlier et al. (1988) Biochemistry 27, 3555-3559]. Also, several conditions that could be expected to increase the degree of potential uncoupling between GTP hydrolysis and microtubule assembly were examined, and no evidence of uncoupling was found. Our results are consistent with models that propose cooperative mechanisms that limit GTP hydrolysis to the terminal ring of tubulin subunits [e.g., O'Brien et al. (1987) Biochemistry 26, 4148-4156]. The results are also consistent with the hypothesis that a slow conformational change in tubulin subunits after GTP hydrolysis and Pi release occurs that results in destabilized microtubule ends when such subunits become exposed at the ends.