Efficacy of UV treatment in the management of bacterial adhesion on hard surfaces

The efficacy of UV treatment to control bacterial adhesion onto hard surfaces was investigated in laboratory conditions. The major characteristics necessary for biofilm formation like extracellular polymeric substance (EPS) production, carbohydrate and protein concentration in EPS, and adhesion ability onto hard surface were studied using two bacterial strains isolated from marine biofilms. The results showed that there was a considerable difference between the control and UV treated bacterial cultures in their viability, production of EPS, and adhesion ability. The protein and carbohydrate concentration of the EPS and the adhesion of bacterial cells to surface were also considerably reduced due to UV treatment. This study indicates that treatment of water with UV light may be used to control biofilm development on hard surfaces.     

N-acetyl-L-cysteine affects growth,extracellular polysaccharide production,and bacterial biofilm formation on solid surfaces

N-Acetyl-L-cysteine (NAC) is used in medical treatment of patients with chronic bronchitis. The positive effects of NAC treatment have primarily been attributed to the mucus-dissolving properties of NAC, as well as its ability to decrease biofilm formation, which reduces bacterial infections. Our results suggest that NAC also may be an interesting candidate for use as an agent to reduce and prevent biofilm formation on stainless steel surfaces in environments typical of paper mill plants. Using 10 different bacterial strains isolated from a paper mill, we found that the mode of action of NAC is chemical, as well as biological, in the case of bacterial adhesion to stainless steel surfaces. The initial adhesion of bacteria is dependent on the wettability of the substratum. NAC was shown to bind to stainless steel, increasing the wettability of the surface. Moreover, NAC decreased bacterial adhesion and even detached bacteria that were adhering to stainless steel surfaces. Growth of various bacteria, as monocultures or in a multispecies community, was inhibited at different concentrations of NAC. We also found that there was no detectable degradation of extracellular polysaccharides (EPS) by NAC, indicating that NAC reduced the production of EPS, in most bacteria tested, even at concentrations at which growth was not affected. Altogether, the presence of NAC changes the texture of the biofilm formed and makes NAC an interesting candidate for use as a general inhibitor of formation of bacterial biofilms on stainless steel surfaces.     

Bacterial biofilms and surface fouling

Bacteria are attracted to surfaces. Their surface adhesion, with subsequent binary fission and exopolymer production, leads to the formation of biofilms. Such biofilms consist of bacterial cells in a matrix of their own exopolysaccharide glycocalyces. In addition to the bulk fluid and the surface, biofilms constitute a third physical phase. The close proximity of the bacterial cells in the biofilm matrices assists the formation of metabolically dependent consortia. The chemical and physical activities of these microbial communities produces a heterogeneous system at the colonised surface. Metabolites, produced at specific points on the surface, can lead to the development of effective anodes and cathodes at adjoining locations on the surface. In this way the fouling of a surface by bacterial biofilm development facilitates focal attack on that surface. This pit formation is characteristic of bacterial surface activities as diverse as dental decay and metal corrosion. In this review, we examine bacterial adhesion, biofilm formation and several instances of focal bacterial attack on colonised surfaces. However, pathogenic biofilms and the fouling of biological surfaces, with the exception of caries formation, is outside the scope of this paper.     

细菌生物被膜基质的研究进展

细菌生物被膜(biofilm)附着在生物或者非生物表面,由细菌及其分泌的糖、蛋白质和核酸等多种基质组成的细菌群落,是造成病原细菌持续性感染、毒力和耐药性的重要原因之一.细菌的生物被膜基质由复杂的胞外聚合物(extracellular polymeric substances,EPS)构成,影响生物被膜的结构和功能.本文...     

Bacterial biofilms as a natural form of existence of bacteria in the environment and host organism

Advances in microscopic analysis and molecular genetics research methods promoted the acquisition of evidence that natural bacteria populations exist predominately as substrate attached biofilms. Bacteria in biofilms are able to exchange signals and display coordinated activity that is inherent to multicellular organisms. Formation of biofilm communities turned out to be one of the main survival strategies of bacteria in their ecological niche. Bacteria in attached condition in biofilm are protected from the environmental damaging factors and effects of antibacterial substances in the environment and host organism during infection. According to contemporary conception, biofilm is a continuous layer of bacterial cells that are attached to a surface and each other, and contained in a biopolymer matrix. Such bacterial communities may be composed of bacteria of one or several species, and composed of actively functioning cells as well as latent and uncultured forms. Particular attention has recently been paid to the role of biofilms in the environment and host organism. Microorganisms form biofilm on any biotic and abiotic surfaces which creates serious problems in medicine and various areas of economic activity. Currently, it is established that biofilms are one of the pathogenetic factors of chronic inflection process formation. The review presents data on ubiquity of bacteria existence as biofilms, contemporary methods of microbial community analysis, structural-functional features of bacterial biofilms. Particular attention is paid to the role of biofilm in chronic infection process formation, heightened resistance to antibiotics of bacteria in biofilms and possible mechanisms of resistance. Screening approaches for agents against biofilms in chronic infections are discussed.     

Microbial population dynamics and proteomics in membrane bioreactors with enzymatic quorum quenching

Quorum sensing gives rise to biofilm formation on the membrane surface, which in turn causes a loss of water permeability in membrane bioreactors (MBRs) for wastewater treatment. Enzymatic quorum quenching was reported to successfully inhibit the formation of biofilm in MBRs through the decomposition of signal molecules, N-acyl homoserine lactones (AHLs). The aim of this study was to elucidate the mechanisms of quorum quenching in more detail in terms of microbial population dynamics and proteomics. Microbial communities in MBRs with and without a quorum quenching enzyme (acylase) were analyzed using pyrosequencing and compared with each other. In the quorum quenching MBR, the rate of transmembrane pressure (TMP) rise-up was delayed substantially, and the proportion of quorum sensing bacteria with AHL-like autoinducers (such as Enterobacter, Pseudomonas, and Acinetobacter) also decreased in the entire microbial community of mature biofilm in comparison to that in the control MBR. These factors were attributed to the lower production of extracellular polymeric substances (EPS), which are known to play a key role in the formation of biofilm. Proteomic analysis using the Enterobacter cancerogenus strain ATCC 35316 demonstrates the possible depression of protein expression related to microbial attachments to solid surfaces (outer membrane protein, flagellin) and the agglomeration of microorganisms (ATP synthase beta subunit) with the enzymatic quorum quenching. It has been argued that changes in the microbial population, EPS and proteins via enzymatic quorum quenching could inhibit the formation of biofilm, resulting in less biofouling in the quorum quenching MBR.     

Mechanisms of Bacillus cereus biofilm formation: an investigation of the physicochemical characteristics of cell surfaces and extracellular proteins

Microbial biofilms contribute to biofouling in a wide range of processes from medical implants to processed food. The extracellular polymeric substances (EPS) are implicated in imparting biofilms with structural stability and resistance to cleaning products. Still, very little is known about the structural role of the EPS in Gram-positive systems. Here, we have compared the cell surface and EPS of surface-attached (biofilm) and free-floating (planktonic) cells of Bacillus cereus, an organism routinely isolated from within biofilms on different surfaces. Our results indicate that the surface properties of cells change during biofilm formation and that the EPS proteins function as non-specific adhesions during biofilm formation. The physicochemical traits of the cell surface and the EPS proteins give us an insight into the forces that drive biofilm formation and maintenance in B. cereus.     

Characterisation of the Physical Composition and Microbial Community Structure of Biofilms within a Model Full-Scale Drinking Water Distribution System

Within drinking water distribution systems (DWDS), microorganisms form multi-species biofilms on internal pipe surfaces. A matrix of extracellular polymeric substances (EPS) is produced by the attached community and provides structure and stability for the biofilm. If the EPS adhesive strength deteriorates or is overcome by external shear forces, biofilm is mobilised into the water potentially leading to degradation of water quality. However, little is known about the EPS within DWDS biofilms or how this is influenced by community composition or environmental parameters, because of the complications in obtaining biofilm samples and the difficulties in analysing EPS. Additionally, although biofilms may contain various microbial groups, research commonly focuses solely upon bacteria. This research applies an EPS analysis method based upon fluorescent confocal laser scanning microscopy (CLSM) in combination with digital image analysis (DIA), to concurrently characterize cells and EPS (carbohydrates and proteins) within drinking water biofilms from a full-scale DWDS experimental pipe loop facility with representative hydraulic conditions. Application of the EPS analysis method, alongside DNA fingerprinting of bacterial, archaeal and fungal communities, was demonstrated for biofilms sampled from different positions around the pipeline, after 28 days growth within the DWDS experimental facility. The volume of EPS was 4.9 times greater than that of the cells within biofilms, with carbohydrates present as the dominant component. Additionally, the greatest proportion of EPS was located above that of the cells. Fungi and archaea were established as important components of the biofilm community, although bacteria were more diverse. Moreover, biofilms from different positions were similar with respect to community structure and the quantity, composition and three-dimensional distribution of cells and EPS, indicating that active colonisation of the pipe wall is an important driver in material accumulation within the DWDS.     

Impact of an extracellular polymeric substance (EPS) precoating on the initial adhesion of Burkholderia cepacia and Pseudomonas aeruginosa

Extracellular polymeric substances (EPS) significantly influence bacterial adhesion to solid surfaces, but it is difficult to elucidate the role of EPS on bacterial adhesion due to their complexity and variability. In the present study, the effect of EPS on the initial adhesion of B. cepaciaepacia PC184 and P. aeruginosa PAO1 on glass slides with and without an EPS precoating was investigated under three ionic strength conditions. The surface roughness of EPS coated slides was evaluated by atomic force microscopy (AFM), and its effect on initial bacterial adhesion was found to be trivial. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the elemental surface compositions of bacterial cells and substrata. The results showed that an EPS precoating hindered bacterial adhesion on solid surfaces, which was largely attributed to the presence of proteins in the EPS. This observation can be attributed to the increased steric repulsion at high ionic strength conditions. A steric model for polymer brushes that considers the combined influence of steric effects and DLVO interaction forces is shown to adequately describe bacterial adhesion behaviors.     

细菌菌膜的成分、调控及其与植物的关系

菌膜是细菌群落发展的一种高度组织化的群体状态。在菌膜形成过程中,细菌胞外物质EPS(Exopolysaccharides)、eDNA(Extracellular DNA)、胞外蛋白等都参与菌膜的形成,它们为菌膜提供机械稳定性,帮助细菌粘附到物体表面,促进菌膜中不同细菌间物质的循环及基因的水平转移。菌膜形成涉及到群体感应、C-di-GMP(Cyclic diguanylate monophosphate)和sRNA等一系列调控机制。土壤环境中栖息着大量的微生物,许多土壤微生物定殖于植物根际,从而与植物发生着密切的相互作用;菌膜的形成是细菌稳定定殖于植物根际的关键因素,有助于植物促生菌或致病菌在根际更好的生存。本文就菌膜的成分、调控及其与植物的关系等三个方面的内容进行综述。     

Exopolysaccharide Biosynthesis Enables Mature Biofilm Formation on Abiotic Surfaces by Herbaspirillum seropedicae

H. seropedicae associates endophytically and epiphytically with important poaceous crops and is capable of promoting their growth. The molecular mechanisms involved in plant colonization by this microrganism are not fully understood. Exopolysaccharides (EPS) are usually necessary for bacterial attachment to solid surfaces, to other bacteria, and to form biofilms. The role of H. seropedicae SmR1 exopolysaccharide in biofilm formation on both inert and plant substrates was assessed by characterization of a mutant in the espB gene which codes for a glucosyltransferase. The mutant strain was severely affected in EPS production and biofilm formation on glass wool. In contrast, the plant colonization capacity of the mutant strain was not altered when compared to the parental strain. The requirement of EPS for biofilm formation on inert surface was reinforced by the induction of eps genes in biofilms grown on glass and polypropylene. On the other hand, a strong repression of eps genes was observed in H. seropedicae cells adhered to maize roots. Our data suggest that H. seropedicae EPS is a structural component of mature biofilms, but this development stage of biofilm is not achieved during plant colonization.     

Evolution of biofilms during the colonization process of pyrite by Acidithiobacillus thiooxidans

We have applied epifluorescence principles, atomic force microscopy, and Raman studies to the analysis of the colonization process of pyrite (FeS₂) by sulfuroxidizing bacteria Acidithiobacillus thiooxidans after 1, 15, 24, and 72 h. For the stages examined, we present results comprising the evolution of biofilms, speciation of S_n²⁻/S⁰ species, adhesion forces of attached cells, production and secretion of extracellular polymeric substances (EPS), and its biochemical composition. After 1 h, highly dispersed attached cells in the surface of the mineral were observed. The results suggest initial non-covalent, weak interactions (e.g., van der Waal’s, hydrophobic interactions), mediating an irreversible binding mechanism to electrooxidized massive pyrite electrode (eMPE), wherein the initial production of EPS by individual cells is determinant. The mineral surface reached its maximum cell cover between 15 to 24 h. Longer biooxidation times resulted in the progressive biofilm reduction on the mineral surface. Quantification of attached cell adhesion forces indicated a strong initial mechanism (8.4 nN), whereas subsequent stages of mineral colonization indicated stability of biofilms and of the adhesion force to an average of 4.2 nN. A variable EPS (polysaccharides, lipids, and proteins) secretion at all stages was found; thus, different architectural conformation of the biofilms was observed during 120 h. The main EPS produced were lipopolysaccharides which may increase the hydrophobicity of A. thiooxidans biofilms. The highest amount of lipopolysaccharides occurred between 15–72 h. In contrast with abiotic surfaces, the progressive depletion of S_n²⁻/S⁰ was observed on biotic eMPE surfaces, indicating consumption of surface sulfur species. All observations indicated a dynamic biooxidation mechanism of pyrite by A. thiooxidans, where the biofilms stability and composition seems to occur independently from surface sulfur species depletion.     

Reproducible Biofilm Cultivation of Chemostat-Grown Escherichia coli and Investigation of Bacterial Adhesion on Biomaterials Using a Non-Constant-Depth Film Fermenter

Biomaterials-associated infections are primarily initiated by the adhesion of microorganisms on the biomaterial surfaces and subsequent biofilm formation. Understanding the fundamental microbial adhesion mechanisms and biofilm development is crucial for developing strategies to prevent such infections. Suitable in vitro systems for biofilm cultivation and bacterial adhesion at controllable, constant and reproducible conditions are indispensable. This study aimed (i) to modify the previously described constant-depth film fermenter for the reproducible cultivation of biofilms at non-depth-restricted, constant and low shear conditions and (ii) to use this system to elucidate bacterial adhesion kinetics on different biomaterials, focusing on biomaterials surface nanoroughness and hydrophobicity. Chemostat-grown Escherichia coli were used for biofilm cultivation on titanium oxide and investigating bacterial adhesion over time on titanium oxide, poly(styrene), poly(tetrafluoroethylene) and glass. Using chemostat-grown microbial cells (single-species continuous culture) minimized variations between the biofilms cultivated during different experimental runs. Bacterial adhesion on biomaterials comprised an initial lag-phase I followed by a fast adhesion phase II and a phase of saturation III. With increasing biomaterials surface nanoroughness and increasing hydrophobicity, adhesion rates increased during phases I and II. The influence of materials surface hydrophobicity seemed to exceed that of nanoroughness during the lag-phase I, whereas it was vice versa during adhesion phase II. This study introduces the non-constant-depth film fermenter in combination with a chemostat culture to allow for a controlled approach to reproducibly cultivate biofilms and to investigate bacterial adhesion kinetics at constant and low shear conditions. The findings will support developing and adequate testing of biomaterials surface modifications eventually preventing biomaterial-associated infections.     

Bacterial adhesion: From mechanism to control

Bacterial adhesion is the initial step in colonization and biofilm formation. Biofilms can, on the one hand, be detrimental to both human life and industrial processes, for example, causing infection, pathogen contamination, and slime formation, while on the other hand, be beneficial in environmental technologies and bioprocesses. For control and utilization of bacterial adhesion and biofilms, adhesion mechanisms must be elucidated. Conventional physicochemical approaches based on Lifshitz-van der Waals, electrostatic and acid–base interactions provide important models of bacterial adhesion but have a limited capacity to provide a complete understanding of the complex adhesion process of real bacterial cells. In conventional approaches, bacterial cells, whose surfaces are structurally and chemically heterogeneous, are often described from the viewpoint of their overall cellular properties. Cell appendages such as polysaccharide chains and proteinous nanofibers have an important function bridging between cells and the substratum in conventional adhesion models, but sometimes cause deviation from the models of cell adhesion. In reality, cell appendages are responsible for specific and nonspecific cell adhesion to biotic and abiotic surfaces. This paper reviews conventional physicochemical models and cell appendage-mediated cell adhesion. State-of-the-art technologies for controlling microbial adhesion and biofilm formation are also described. These technologies are based on the adhesion mechanisms.     

Exopolysaccharide production is required for development of Escherichia coli K-12 biofilm architecture

Although exopolysaccharides (EPSs) are a large component of bacterial biofilms, their contribution to biofilm structure and function has been examined for only a few organisms. In each of these cases EPS has been shown to be required for cellular attachment to abiotic surfaces. Here, we undertook a genetic approach to examine the potential role of colanic acid, an EPS of Escherichia coli K-12, in biofilm formation. Strains either proficient or deficient in colanic acid production were grown and allowed to adhere to abiotic surfaces and were then examined both macroscopically and microscopically. Surprisingly, we found that colanic acid production is not required for surface attachment. Rather, colanic acid is critical for the formation of the complex three-dimensional structure and depth of E. coli biofilms.     

DNA Builds and Strengthens the Extracellular Matrix in Myxococcus xanthus Biofilms by Interacting with Exopolysaccharides

One intriguing discovery in modern microbiology is the extensive presence of extracellular DNA (eDNA) within biofilms of various bacterial species. Although several biological functions have been suggested for eDNA, including involvement in biofilm formation, the detailed mechanism of eDNA integration into biofilm architecture is still poorly understood. In the biofilms formed by Myxococcus xanthus, a Gram-negative soil bacterium with complex morphogenesis and social behaviors, DNA was found within both extracted and native extracellular matrices (ECM). Further examination revealed that these eDNA molecules formed well organized structures that were similar in appearance to the organization of exopolysaccharides (EPS) in ECM. Biochemical and image analyses confirmed that eDNA bound to and colocalized with EPS within the ECM of starvation biofilms and fruiting bodies. In addition, ECM containing eDNA exhibited greater physical strength and biological stress resistance compared to DNase I treated ECM. Taken together, these findings demonstrate that DNA interacts with EPS and strengthens biofilm structures in M. xanthus.     

The role of exopolysaccharides in dual species biofilm development

A plasmid encoding the green fluorescent protein (GFP) of Aequorea victoria was transformed into a biofilm-forming strain of Enterobacter agglomerans originally isolated from an industrial environment. The transformed strain, EntGFP, could then be identified in dual species biofilms by direct visualization, plate counts and quantitiative fluorescence measurements. A variety of cell constituents and products may be involved in the adhesion and accumulation process and exopolysaccharides (EPS) represent one of these factors. The involvement of EPS in the initial adhesion events and the role in dual species biofilm development was investigated. Cells of EntGFP and Klebsiella pneumoniae Gl interact forming biofilms more successfully in a mixture than in isolation. The co-resistance results in enhanced biofilm formation and increased resistance to disinfection. Microscopic examination showed that the two species were often closely juxtaposed in microcolonies, suggesting the interactions involve surface-associated macromolecules. Fluorescence was used to measure the adhesion of EntGFP cells to Kleb, pneumoniae Gl (Gl) EPS. The results showed EntGFP adhered better to Gl EPS that Ent EPS. Polysaccharde depolymerases isolated from a bacteriophage for Ent. agglomerans were used to degrade Ent EPS specifically. Following polysaccharase treatment, the adhaesion of EntGFP to Gl cells was reduced. This suggests both types of EPS mediate adhesion. The two types of EPS were dissolved in dimethylsulphoxide and when mixed, their viscosity increased, reaching a maximum after ～+40 min. This may partially explain the increased protection of dual species biofilms from disinfectants. The depolymerases were used to treat dual species biofilms and this resulted in the effective removal of both species from the surface. This may suggest Ent contributes more EPS to the biofilm matrix. The EPS play an important role in EntGFP and Gl dual species biofilm formation both as adhesins and as the EPS interact, changing their physical properties.     

Three-Dimensional Numerical Simulations of Biofilm Dynamics with Quorum Sensing in a Flow Cell

We develop a multiphasic hydrodynamic theory for biofilms taking into account interactions among various bacterial phenotypes, extracellular polymeric substance (EPS), quorum sensing (QS) molecules, solvent, and antibiotics. In the model, bacteria are classified into down-regulated QS, up-regulated QS, and non-QS cells based on their QS ability. The model is first benchmarked against an experiment yielding an excellent fit to experimental measurements on the concentration of QS molecules and the cell density during biofilm development. It is then applied to study development of heterogeneous structures in biofilms due to interactions of QS regulation, hydrodynamics, and antimicrobial treatment. Our 3D numerical simulations have confirmed that (i). QS is beneficial for biofilm development in a long run by building a robust EPS population to protect the biofilm; (ii). biofilms located upstream can induce QS downstream when the colonies are close enough spatially; (iii). QS induction may not be fully operational and can even be compromised in strong laminar flows; (v). the hydrodynamic stress alters the biofilm morphology. Through further numerical investigations, our model suggests that (i). QS-regulated EPS production contributes to the structural formation of heterogeneous biofilms; (ii) QS down-regulated cells tend to grow at the surface of the biofilm while QS up-regulated ones tend to grow in the bulk; (iii) when nutrient supply is sufficient, QS induction might be more effective upstream than downstream; (iv) QS may be of little benefit in a short timescale in term of fighting against invading strain/species; (v) the material properties of biomass (bacteria and EPS) have strong impact on the dilution of QS molecules under strong shear flow. In addition, with this modeling framework, hydrodynamic details and rheological quantities associated with biofilm formation under QS regulation can be resolved.     

Discrimination between random and non-random processes in early bacterial colonization on biomaterial surfaces: application of point pattern analysis

The dynamics of adhesion and growth of bacterial cells on biomaterial surfaces play an important role in the formation of biofilms. The surface properties of biomaterials have a major impact on cell adhesion processes, eg the random/non-cooperative adhesion of bacteria. In the present study, the spatial arrangement of Escherichia coli on different biomaterials is investigated in a time series during the first hours after exposure. The micrographs are analyzed via an image processing routine and the resulting point patterns are evaluated using second order statistics. Two main adhesion mechanisms can be identified: random adhesion and non-random processes. Comparison with an appropriate null-model quantifies the transition between the two processes with statistical significance. The fastest transition to non-random processes was found to occur after adhesion on PTFE for 2–3 h. Additionally, determination of cell and cluster parameters via image processing gives insight into surface influenced differences in bacterial micro-colony formation.