Technical note: An in vitro study of dental microwear formation using the BITE Master II chewing machine

Dental microwear has been used for decades to reconstruct the diets of fossil hominins and bioarchaeological populations. The basic theory has been that hard‐brittle foods (e.g., nuts, bone) require crushing and leave pits as they are pressed between opposing cheek‐tooth surfaces, whereas soft‐tough foods (e.g., grass blades, meat) require shearing and leave scratches as they are dragged along opposing surfaces that slide past one another. However, recent studies have called into question the efficacy of microwear as an indicator of diet. One issue has been the limited number of in vitro studies providing empirical evidence for associations between microwear pattern and chewing behavior. We here describe a new study using a chewing simulator, the BITE Master II, to examine the effects of angle of approach between opposing teeth and food consistency on microwear surface texture. Results indicate that opposing teeth that approach one another: 1) perpendicular to the occlusal plane (crushing) result in pits; 2) parallel to the occlusal plane (shearing) result in striations in the direction of movement; and 3) oblique to the occlusal plane (45°) result in both striations and pits. Results further suggest that different food types and abrasive loads affect the propensity to accumulate microwear features independent of feature shapes. Am J Phys Anthropol 158:769–775, 2015. © 2015 Wiley Periodicals, Inc.     

Relationships between femoral fracture loads for two load configurations

Studies of proximal femoral strength usually involve one of two types of loading conditions, loading similar to joint loading during single-limb stance or loading simulating impact from a fall. When interpreting the results of studies involving only one of these load configurations, the question arises as to their applicability to the other configuration. In addition, it is desirable to know whether, for an individual bone, fracture load for one load configuration is indicative of fracture load for the other configuration. In this study, the relationship between proximal femoral fracture loads for single-limb stance loading and loading simulating impact from a type of fall was determined from mechanical testing of 17 matched pairs of human proximal femora. Fracture loads for these two configurations were found to be linearly related (r = 0.901, p < 0.001). However, the correlation between fracture loads is not notably stronger than correlations currently available between fracture load and measures of bone density and geometry. In addition, the regression results indicate that 81% of the variance in fracture load for one loading condition is accounted for by fracture load for the other loading condition. Thus, 19% of the variance remains unexplained, indicating that the results of studies involving only one load configuration are not necessarily indicative of those that would be found for another configuration.     

Non-occlusal dental microwear variability in a sample of Middle and Late Pleistocene human populations from Europe and the Near East

Non-occlusal, buccal tooth microwear variability has been studied in 68 fossil humans from Europe and the Near East. The microwear patterns observed suggest that a major shift in human dietary habits and food processing techniques might have taken place in the transition from the Middle to the Late Pleistocene populations. Differences in microwear density, average length, and orientation of striations indicate that Middle Pleistocene humans had more abrasive dietary habits than Late Pleistocene populations. Both dietary and cultural factors might be responsible for the differences observed. In addition, the Middle Paleolithic Neanderthal specimens studied show a highly heterogeneous pattern of microwear when compared to the other samples considered, which is inconsistent with a hypothesis of all Neanderthals having a strictly carnivorous diet. The high density of striations observed in the buccal surfaces of several Neanderthal teeth might be indicative of the inclusion of plant foods in their diet. The buccal microwear variability observed in the Neanderthals is compatible with an overall exploitation of both plant and meat foods on the basis of food availability. A preliminary analysis of the relationship between buccal microwear density and climatic conditions prevailing in Europe during the Late Pleistocene has been attempted. Cold climatic conditions, as indicated by oxygen isotope stage data, seem to be responsible for higher densities of microwear features, whereas warmer periods could correspond to a reduced pattern of scratch density. Such a relationship would be indicative of less abrasive dietary habits, perhaps more meat dependent, during warmer periods.     

Wear striations on the incisors of ceropithecid monkeys as an index of diet and habitat preference

Wear striations on the incisors of Old World monkeys were examined in order to determine associations between the distributions of striations, diet, and habitat preference. Significant differences exist between the Cercopithe-cinae and the Colobinae in respect to the orientation of incisor wear striations. In the Colobinae striations are oriented in a predominantly mesiodistal direction. In the Cercopithecinae striations usually have a labiolingual orientation. Comparisons of terrestrial and arboreal genera indicate that significant differences exist between the two groups in respect to the density of striations on the oc-clusal wear facets of maxillary central incisors. Arboreal and terrestrial monkeys also differ in the frequency of individual incisor wear facets completely devoid of wear striations.     

Wear striation direction on primate teeth: a scanning electron microscope examination.

Two experimental methods were used to produce wear striations in one direction on unworn teeth. These include: (1) sliding 22 American Indian (Juntunen site, Michigan; Late Woodland) newly erupted incisors, by hand, across a flat grass surface covered with fine loose sand; and (2) using a unidirectional motor driven mechanical wear machine to draw 56 modern human dental extractions across a flat glass surface covered with silicon carbide powder of different grit sizes. A scanning electron microscope examination of individual wear striation morphology indicates that these wear striations begin with broad pits and have extending grooves that become narrower; characteristics that indicate the motion of wear. Patterns of wear striations on the worn dentitions of American Indians (Juntunen site) and the paleocene primate Phenacolemur pagei show similar characteristics and correspond to the buccal phase of mastication when the mandible is drawn upward, forward and slightly medially into centric occlusion. The data provided by this study can be used to test competing hypotheses concerning the direction of mandibular movement during mastication and food preparation.     

A critical distance study of stress concentrations in bone

The Theory of Critical Distances (TCD) is a method used to study the failure of material in situations where stress concentrations, such as holes and notches, are present. This method uses two material constants: a critical length and a critical stress. The elastic stress field close to the stress concentration is examined, applying a fracture criterion. The TCD has been applied to predict brittle fracture in various different materials and various types of notches but it has not previously been applied to bone. Since bone fails by brittle fracture with limited plasticity, it is expected that the TCD will be applicable. Experimental data were obtained from the literature on the effects of sharp notches and holes loaded in various ways (tension, torsion and bending). These tests were modelled using finite element analysis. It was found that the TCD could be successfully applied to predict the load required for brittle fracture as a function of the type and size of the stress concentration feature. The critical distance was found to be almost constant, about 0.3-0.4mm, for all types of bone studied: the critical stress was found to be related to the material's ultimate tensile strength by a constant factor of T=1.33. The results of this study will be of practical value in the assessment of stress concentration features introduced during surgery and of naturally occurring bone defects.     

Intraindividual and intragroup variability of buccal tooth striation pattern

Intrapopulational tooth striation variability has been studied in a sample of 99 individuals from the medieval agriculturalist population of La Olmeda (Palencia, Spain). The number, length, and orientation of all observed striations were recorded using a scanning electron microscope and an image analyzer system. Tooth striations were observed at 100 × magnification on the buccal surface of Pm4 and M1 teeth. The results obtained for the adult age group indicate that the buccal striation pattern is a characteristic trait which does not vary significantly among teeth for each individual. Agegroup variability suggests that buccal tooth striations accumulate over quite long periods of time. The characteristic striation pattern for the population is completely attained in the subadult age group. For the analyzed population, seasonal changes in dietary habits apparently did not affect the buccal striation pattern. Weaning of children in the population from La Olmeda seems to have occurred long before 2–5 years of age. Infants had a highly abrasive diet, and subadult and adult individuals would have had a slightly softer diet, perhaps due to a higher meat intake. The buccal striation pattern as a dietary indicator seems to be of great reliability, allowing for quantitative analysis of intrapopulation and interpopulation variability. © 1994 Wiley-Liss, Inc.     

Directed cortical information flow during human object recognition: analyzing induced EEG gamma-band responses in brain's source space

The increase of induced gamma-band responses (iGBRs; oscillations >30 Hz) elicited by familiar (meaningful) objects is well established in electroencephalogram (EEG) research. This frequency-specific change at distinct locations is thought to indicate the dynamic formation of local neuronal assemblies during the activation of cortical object representations. As analytically power increase is just a property of a single location, phase-synchrony was introduced to investigate the formation of large-scale networks between spatially distant brain sites. However, classical phase-synchrony reveals symmetric, pair-wise correlations and is not suited to uncover the directionality of interactions. Here, we investigated the neural mechanism of visual object processing by means of directional coupling analysis going beyond recording sites, but rather assessing the directionality of oscillatory interactions between brain areas directly. This study is the first to identify the directionality of oscillatory brain interactions in source space during human object recognition and suggests that familiar, but not unfamiliar, objects engage widespread reciprocal information flow. Directionality of cortical information-flow was calculated based upon an established Granger-Causality coupling-measure (partial-directed coherence; PDC) using autoregressive modeling. To enable comparison with previous coupling studies lacking directional information, phase-locking analysis was applied, using wavelet-based signal decompositions. Both, autoregressive modeling and wavelet analysis, revealed an augmentation of iGBRs during the presentation of familiar objects relative to unfamiliar controls, which was localized to inferior-temporal, superior-parietal and frontal brain areas by means of distributed source reconstruction. The multivariate analysis of PDC evaluated each possible direction of brain interaction and revealed widespread reciprocal information-transfer during familiar object processing. In contrast, unfamiliar objects entailed a sparse number of only unidirectional connections converging to parietal areas. Considering the directionality of brain interactions, the current results might indicate that successful activation of object representations is realized through reciprocal (feed-forward and feed-backward) information-transfer of oscillatory connections between distant, functionally specific brain areas.     

Kinematic parameters inferred from enamel microstructure: new insights into the diet of Australopithecus anamensis

The dietary adaptations of Australopithecus anamensis are contentious, with suggestions that range from soft fruits to hard, brittle, tough, and abrasive foods. It is unlikely that all propositions are equally valid, however. Here we extend recent finite element (FE) analyses of enamel microstructure (Shimizu and Macho, 2008) to enquire about the range of loading directions (i.e., kinematics) to which A. anamensis enamel microstructure/molars could safely be subjected. The rationale underlying this study is the observation that hard brittle foods are broken down in crush, while tough foods require shear. The findings are compared with those of Pan and Gorilla.Eighteen detailed FE models of enamel microstructure were created and analysed. The results highlight the uniqueness of A. anamensis dental structure and imply that mastication in this species included a greater shear component than in Pan, as well as a wider range of loading directions; it is similar to that in Gorilla in this respect. These findings are in accord with microwear studies (Grine et al., 2006a). Unlike either of the great apes, however, enamel microstructure of A. anamensis was found to be poorly equipped to withstand loading parallel to the dentino-enamel junction; such loading regimes are associated with mastication of soft fleshy fruits. This, together with broader morphological considerations, raises doubts as to whether A. anamensis was essentially a frugivore that expanded its dietary niche as a result of fluctuations in environmental conditions, e.g., during seasonal food shortages. Instead, it is more parsimonious to conclude that the habitual diet of A. anamensis differed considerably from that of either of the extant African great apes.     

Suppression of Radixin and Moesin Alters Growth Cone Morphology,Motility, and Process Formation In Primary Cultured Neurons

In this study we have examined the cellular functions of ERM proteins in developing neurons. The results obtained indicate that there is a high degree of spatial and temporal correlation between the expression and subcellular localization of radixin and moesin with the morphological development of neuritic growth cones. More importantly, we show that double suppression of radixin and moesin, but not of ezrin–radixin or ezrin–moesin, results in reduction of growth cone size, disappearance of radial striations, retraction of the growth cone lamellipodial veil, and disorganization of actin filaments that invade the central region of growth cones where they colocalize with microtubules. Neuritic tips from radixin–moesin suppressed neurons displayed high filopodial protrusive activity; however, its rate of advance is 8–10 times slower than the one of growth cones from control neurons. Radixin–moesin suppressed neurons have short neurites and failed to develop an axon-like neurite, a phenomenon that appears to be directly linked with the alterations in growth cone structure and motility. Taken collectively, our data suggest that by regulating key aspects of growth cone development and maintenance, radixin and moesin modulate neurite formation and the development of neuronal polarity.     

High Active Material Loading in All‐Solid‐State Battery Electrode via Particle Size Optimization

Low active material loading in the composite electrode of all‐solid‐state batteries (SSBs) is one of the main reasons for the low energy density in current SSBs. In this work, it is demonstrated with both modeling and experiments that in the regime of high cathode loading, the utilization of cathode material in the solid‐state composite is highly dependent on the particle size ratio of the cathode to the solid‐state conductor. The modeling, confirmed by experimental data, shows that higher cathode loading and therefore an increased energy density can be achieved by increasing the ratio of the cathode to conductor particle size. These results are consistent with ionic percolation being the limiting factor in cold‐pressed solid‐state cathode materials and provide specific guidelines on how to improve the energy density of composite cathodes for solid‐state batteries. By reducing solid electrolyte particle size and increasing the cathode active material particle size, over 50 vol% cathode active material loading with high cathode utilization is able to be experimentally achieved, demonstrating that a commercially‐relevant, energy‐dense cathode composite is achievable through simple mixing and pressing method.     

Are the ratios of bill crossing morphs in crossbills the result of frequency-dependent selection?

Summary The direction the lower mandible curves in crossbills (Loxia) is an example of a discrete polymorphism. The lower mandible crosses with equal frequency to the left and to the right in several crossbill populations. I hypothesize that the 1:1 ratio results from negative frequency-dependent selection favouring the rarer morph. A crossbill always orients toward closed conifer cones so that its lower mandible is directed towards the cone axis. Thus, only part of the cone can be reached easily when crossbills have few perch sites and the cone cannot be removed from the branch or otherwise turned round. Since crossbills may visit cones which have previously been foraged on by other individuals, an equal frequency of left-to-right mandible crossings may minimize overlap in the use of cones and enhance foraging efficiency. Experimental data support this hypothesis. Moreover, the variation in the ratio of mandible crossing directions among crossbill populations is consistent with this hypothesis.     

Axon guidance: push and pull with ephrins and GDNF

The pathfinding of motor axons is an important model system for understanding binary axon guidance decisions. Recent work has shown that GDNF attracts motor neuron growth cones, and interacts synergistically with ephrinAs on growth cone directionality.     

Hand preferences in chimpanzees (Pan troglodytes), bonobos (Pan paniscus), and orangutans (Pongo pygmaeus) in food-reaching and other daily activities

We observed 36 captive great apes [31 chimpanzees (Pan troglodytes),2 bonobos (Pan paniscus), and3 orangutans (Pongo pygmaeus)]reaching for items of food and engaging in other spontaneous behaviors. We consider circumstantial factors that could influence the preferred choice of one hand or the other. Most of the subjects (81%) showed a significant hand preference in food reaching that is consistent in directionality with the hand preferences that they showed during other spontaneous behaviors. The results show that the postural adjustment required when carrying out an action seems to influence directly the expression of manual laterality in individuals. Moreover, the results indicate the possible existence of a relationship between maturational factors and persistence in directionality of hand preferences.     

Heterozygosity and its unexpected correlations with hybrid sterility

In general, heterozygosity is considered to be advantageous, primarily because it masks the effects of deleterious recessive alleles. However, there is usually a reduction in fitness in individuals that are heterozygous due to the pairing of two species (heterospecific). Because the parental alleles arose along separate evolutionary paths, they may not function properly when brought together within an individual. The formation of these unfit interspecies hybrids is one of the mechanisms that maintains species isolation. Interestingly, it has been observed that later-generation individuals resulting from a backcross to one parent are more often sterile than those resulting from a backcross to the other parent, but the mechanism underlying this trend is unknown. Here, I show that one direction of backcross produces offspring with more heterospecific genome, and that this is correlated with the directionality seen in backcross hybrid sterility. Therefore, the directionality in sterility is likely due to the different amounts of heterospecific genome present in the two backcrosses. Surprisingly, in spite of the potential fitness consequences, I also find that interspecies laboratory backcrosses in general yield an excess of heterospecific individuals, and that this trend is consistent across multiple taxa.     

Can deterministic mechanical size effects contribute to fracture and microdamage accumulation in trabecular bone?

Failure of bone under monotonic and cyclic loading is related to the bone mineral density, the quality of the bone matrix, and the evolution of microcracks. The theory of linear elastic fracture mechanics has commonly been applied to describe fracture in bone. Evidence is presented that bone failure can be described through a non-linear theory of fracture. Thereby, deterministic size effects are introduced. Concepts of a non-linear theory are applied to discern how the interaction among bone matrix constituents (collagen and mineral), microcrack characteristics, and trabecular architecture can create distinctively differences in the fracture resistance at the bone tissue level. The non-linear model is applied to interpret pre-clinical data concerning the effects of anti-osteoporotic agents on bone properties. The results show that bisphosphonate (BP) treatments that suppress bone remodeling will change trabecular bone in ways such that the size of the failure process zone relative to the trabecular thickness is reduced. Selective estrogen receptor modulators (SERMs) that suppress bone remodeling will change trabecular bone in ways such that the size of the failure process zone relative to the trabecular thickness is increased. The consequences of these changes are reflected in bone mechanical response and predictions are consistent with experimental observations in the animal model which show that BP treatment is associated with more brittle fracture and microcracks without altering the average length of the cracks, whereas SERM treatments lead to a more ductile fracture and mainly increase crack length with a smaller increase in microcrack density. The model suggests that BPs may be more effective in cases in which bone mass is very low, whereas SERMS may be more effective when milder osteoporotic symptoms are present.     

Tensioning technique and fixator stability of a circular external fixator with threaded fine wires

Hybrid external fixators have become more popular over recent years, and although biomechanical tests show varying results from paper to paper, a consistent finding is shear motion occurring at the fracture/osteotomy site during loading. This can be reduced to some extent by frame configuration, and with the use of olive stop wires, but both of these have limitations. We have investigated the use of threaded fine wires in a circular hybrid fixator. A reliable tensioning method is described which minimises movement at the wire-bone interface during tensioning, and threaded wires are seen to offer a significant improvement in fracture site shear stiffness when compared to smooth fine wires.     

Predicting the structural integrity of bone defects repaired using bone graft materials

Bone defects create stress concentrations which can cause fracture under impact or cyclic loading. Defects are often repaired by filling them with a bone graft material; this will reduce the stress concentration, but not completely, because these materials have lower stiffness than bone. The fracture risk decreases over time as the graft material is replaced by living bone. Many new bone graft materials are being developed, using tissue engineering and other techniques, but currently there is no rational way to compare these materials and predict their effectiveness in repairing a given defect. This paper describes, for the first time, a theoretical model which can be used to predict failure by brittle fracture or fatigue, initiating at the defect. Preliminary results are presented, concentrating on the prediction of stress fracture during the crucial post-operative period. It is shown that the likelihood of fracture is strongly influenced by the shape of the defect as well as its size, and also by the level of post-operative exercise. The most important finding is that bone graft materials can be successful in preventing fracture even when their mechanical properties are greatly inferior to those of bone. Future uses of this technique include pre-clinical assessment of bone replacement materials and pre-operative planning in orthopaedic surgery.