Cytological study of early stages of regeneration of protoplasts of fungi and Streptomyces

Early stages of Penicillium chrysogenum 51 and Streptomyces lividans 66 protoplast regeneration on solid media were studied microscopically under conditions of microcompartments. It was shown that at the early regeneration stages there were both rapid reversion into the mycelial form and a retarded one. In P. chrysogenum retarded regeneration resulted in formation of hypha-like structures or protoplast breaking into fragments of various sizes. Some of the fragments restored the cell walls and mycelial organization whereas the others lysed. As a result of the breaking and compartmentalization of the viable areas one protoplasts formed several centers of P. chrysogenum colony reversion. Retarded regeneration of protoplasts in S. lividans 66 resulted in their growth and multiplication in the protoplast-like L-form. On media with penicillin, glycine and horse serum there were isolated colonies of S. lividans L-forms subject to passages or reversion depending on the medium composition.     

Induction, growth and antibiotic production of Streptomyces viridifaciens L-form bacteria

AIMS: To induce, cultivate and investigate the characteristics of L-form bacteria derived from the filamentous actinomycete Streptomyces viridifaciens. METHODS AND RESULTS: L-forms were induced in a liquid medium supplemented with lysozyme and penicillin. A stable culture which no longer required inducing agents but could still revert, was obtained by the twelfth subculture. The specific growth rate of stable L-forms was faster (0.751) than unstable L-forms (0.361). After the exponential growth phase, the cell diameter continued to increase, as did the percentage of vacuoles. Morphologically, the L-forms appeared as spherical bodies with no signs of differentiation and were sensitive to osmotic stress, indicating removal of the cell wall. The L-forms produced secondary metabolites although much lower levels of antibiotic were assayed in the L-forms compared with the cell walled forms. CONCLUSION: Stable L-form bacteria were induced from S. viridifaciens and their growth characterized. The L-forms produced secondary metabolites. SIGNIFICANCE AND IMPACT OF THE STUDY: Stable Streptomyces L-forms were induced and have potential as biocontrol agents.     

Mutant strains ofStreptomyces cinnamonensis protoplasts

Mycelium of Streptomyces cinnamonensis mutant strains cultivated in a synthetic medium with glycine produced protoplasts after lysis of cell walls with lysozyme. The protoplast yield was up to 95%. The protoplasts could revert and mycelial forms were thus regenerated. In a sucrose-containing medium the protoplasts stored at 4 degrees C were stable for 2 d.     

Induction and cultivation of a stable L-form of Bacillus subtilis

The induction of L-forms of Bacillus subtilis from protoplasts is described. The method involved the frequent subculture of the unstable L-form on a growth medium supplemented with lysozyme and horse serum. A stable culture, which did not revert when lysozyme and horse serum were omitted from the medium, was obtained after 13 subcultures. This culture could be grown on solid and in liquid medium by routine microbiological methods. Long-term storage of these cells was achieved by freeze drying and maintenance in glycerol at −70°C. The cultural adaptability of the L-form is described and discussed with respect to methods of cultivation and growth.     

Induction and cultivation of a stable L-form of Bacillus subtilis

The induction of L-forms of Bacillus subtilis from protoplasts is described. The method involved the frequent subculture of the unstable L-form on a growth medium supplemented with lysozyme and horse serum. A stable culture, which did not revert when lysozyme and horse serum were omitted from the medium, was obtained after 13 subcultures. This culture could be grown on solid and in liquid medium by routine microbiological methods. Long-term storage of these cells was achieved by freeze drying and maintenance in glycerol at -70 degrees C. The cultural adaptability of the L-form is described and discussed with respect to methods of cultivation and growth.     

Cell fusion between L-forms and protoplasts of Staphylococcus aureus

Mixtures of various combinations of Lysostaphin protoplasts and stable L-forms of Staphylococcus aureus, which have different markers for drug resistance, were treated with polyethylene glycol (PEG) to examine the development of doubly resistant fusion products (fusants). To recover doubly resistant colonies as L-forms, they were incubated in 4.5% NaCl-brain heart infusion (BHI) broth containing penicillin G (PCG) for enrichment culture and cultured in PCG-4.5% NaCl-BHI agar medium (method 1), while to recover doubly resistant fusants as L-forms and coccal forms, they were grown on reversion medium (R medium) which causes reversion of protoplasts or fusants to parent type cells, and then cultured on assay media, i.e., R medium, BHI agar medium or PCG-4.5% NaCl-BHI agar medium (method 2). Under both experimental conditions, doubly resistant fusants developed as L-form cells by PEG treatment of pairs of protoplasts carrying the chloramphenicol (CP)-resistance plasmid and L-forms having chromosomal resistance to streptomycin (SM). In the reverse combinations, i.e., protoplasts showing chromosomal SM-resistance and L-form cells carrying the CP-resistance plasmid, the first method gave no doubly resistant colonies. By the second method, without enrichment culture on R medium, the latter combination gave doubly resistant fusants as L-form, coccal-type and mixed-type colonial forms, while when the PEG-treated mixture was enriched on R medium, fusants were obtained exclusively as the coccal type on either R medium or BHI agar assay medium. Neither of the methods yielded colonies of doubly resistant fusants on PEG-treatment of pairs of protoplasts and L-forms both of which were chromosomal, but with different drug resistances. These results show that PEG-induced cell fusion between protoplasts and L-forms of S. aureus, unlike the fusion between protoplasts or between L-forms, resulted in transfer of the drug resistance controlled by the plasmid to the fusion products. The fusants obtained were L-forms in method 1, and coccal type in the method 2.     

Factors affecting protoplast formation and regeneration by four species of Streptomyces

Four species of Streptomyces, Streptomyces canescens, S. limosus, S. griseus and S. griseolus , were used to study the effects of glycerine and gelatin on the formation and regeneration of protoplasts. For each species efficient protoplast formation with high protoplast concentrations and low levels of non-protoplast units was obtained with mycelia grown in medium without glycerine. The low regeneration frequencies of protoplasts of S. canescens and S. limosus on R2 medium were increased substantially by the addition of 1% gelatin. The use of single colonies, rather than spores, to establish mycelial cultures was found routinely to produce good protoplast preparations.     

High-frequency fusion of Streptomyces parvulus or Streptomyces antibioticus protoplasts induced by polyethylene glycol.

Conditions were established for the regeneration of protoplasts of Streptomyces parvulus and Streptomyces antibioticus to the mycelial form. Regeneration was accomplished with a hypertonic medium that contained sucrose, CaCl2, MgCl2, and low levels of phosphate. High-frequency fusion of protoplasts derived from auxotrophic strains of S. parvulus or S. antibioticus was induced by polyethylene glycol 4,000 (42%, wt/vol). The frequency of genetic transfer by the fusogenic procedure varied with the auxotrophic strains examined. Fusion with auxotrophic strains of S. parvulus resulted in the formation of true prototrophic recombinants. Similar studies with S. antibioticus revealed that both stable prototrophic recombinants and heterokaryons were formed.     

Isolation and regeneration of protoplasts from the yeast and mycelial form of the dimorphic zygomycete Benjaminiella poitrasii: role of chitin metabolism for morphogenesis during regeneration

Experimental parameters for isolation and regeneration of protoplasts from the mycelial and yeast form cells of the dimorphic zygomycete Benjamininiella poitrasii are reported. Using a chitosanase containing preparation from Streptomyces sp. MCl we obtained protoplasts after 5 h incubation with a yield of 2+/-0.3 x 10(6) ml(-1) and 3+/-0.4 x 10(7) ml(-1) for the mycelial and yeast form, respectively. During regeneration under conditions triggering dimorphism the two morphological forms were observed after 36 h. Initially, for 10-12 h only an irregular mass was formed as a result of deregulated cell wall synthesis. Among the tested inhibitors influencing cell wall metabolism, chitin metabolism inhibitors showed distinctive effects on the regeneration of protoplasts suggesting that the respective enzymes significantly contribute to determining the morphogenesis of the dimorphic fungus B. poitrasii.     

Formation and regeneration of protoplasts of Streptomyces hygroscopicus

Techniques are described for the production and regeneration of protoplasts of Streptomyces hygroscopicus and related strains. No single technique was successful in producing protoplasts from all strains. Regeneration of protoplasts to the mycelial growth form was greatly improved by modifying the physical regeneration environment. Protoplast formation and regeneration was achieved in six out of the seven strains studied.     

Stable L-forms of Clostridium perfringens and their growth on glass surfaces.

L-forms of Clostridium perfringens were induced in brain heart infusion broth containing 10% sucrose and 2 units of penicillin. After a few hours of growth, spheroplasts, granules, and elongated bacilli were apparent. At 24-h intervals, serial subcultures were made in the above medium which resulted in a culture composed entirely of spheroplasts (or protoplasts) and granules. Upon the withdrawal of penicillin these L-form cultures grew well and, after 100 passages, there was no reversion to the bacillary form. Sucrose could also be withdrawn from the medium. The effects of centrifugation, osmotic stabilizer, ultraviolet light, temperature, pH, and lyophilization upon stable L-forms were examined. L-forms were found to attach to the walls of culture tubes during trowth and sheets of L-form growth were obtained on cover slips in Leighton tubes and on the sides of medicine bottles.     

L-Form Induction, Morphology, and Development in Two Related Strains of Erysipelothrix rhusiopathiae

Two related strains of Erysipelothrix rhusiopathiae, one the parent and the other an L-form revertant, were studied for their propensity or ability to produce L-forms under the influence of penicillin. The parent strain produced L-forms in nutrient solid media in an osmolarity range between 0.85 and 5.0% NaCl concentration whereas the revertant strain did so between 0.5 and 3.0% NaCl concentration. When various hyperosmolar media were tried without penicillin, recovery of L-forms from the revertant strain was optimal at a salt concentration of 2.0%, whereas the parent strain occasionally produced a few L-forms on 3.0% salt medium only. The process of penicillin-induced transformation from bacteria to L-form followed an unusual morphological sequence, beginning with beading of the bacterial body, followed by disintegration into granules from which the L-form colony derived. No large bodies were seen during the initial process of L-form induction, but they evolved later from the original granules and had the potential to reproduce L-type growth. The spontaneous development of L-forms in hyperosmolar media had a different morphological sequence starting with elongation of the bacteria into filaments which later developed polar and central dilatations from which granules and L-type growth developed. The differences in biological behavior between these related bacterial strains suggest that the revertant strain developed new properties, probably of genetic origin. Consequently, the assumption that L-forms revert to the "parent" bacteria may not always be justified. It can be made only after the biological properties of the parent and the revertant organisms have been properly identified.     

Unlocking Streptomyces spp. for use as sustainable industrial production platforms by morphological engineering

Filamentous actinomycetes are commercially widely used as producers of natural products (in particular antibiotics) and of industrial enzymes. However, the mycelial lifestyle of actinomycetes, resulting in highly viscous broths and unfavorable pellet formation, has been a major bottleneck in their commercialization. Here we describe the successful morphological engineering of industrially important streptomycetes through controlled expression of the morphogene ssgA. This led to improved growth of many industrial and reference streptomycetes, with fragmentation of the mycelial clumps resulting in significantly enhanced growth rates in batch fermentations of Streptomyces coelicolor and Streptomyces lividans. Product formation was also stimulated, with a twofold increase in yield of enzyme production by S. lividans. We anticipate that the use of the presented methodology will make actinomycetes significantly more attractive as industrial and sustainable production hosts.     

细菌L型的厌氧诱导和培养

厌氧条件下以羧卡青霉素诱导金黄色葡萄球菌、大肠杆菌和蜡样芽胞杆菌形成Ｌ型,观察细菌Ｌ型在厌氧条件下的形成、形态、生长及时渗透压的敏感性等特性。结果表明：蜡样芽胞杆菌在厌氧条件下不能形成Ｌ型或其Ｌ型在厌氧条件下亦不能返祖。金黄色葡萄球菌和大肠杆菌在厌氧条件下虽能诱生Ｌ型,但形成丝状体的构成Ｌ型菌落难以传代培养,厌氧培养未见Ｌ型圆球体和典型Ｌ型油煎蛋样菌落。金黄色葡萄球菌Ｌ型在含１％～１０％ＮａＣｌ的Ｌ型培养基上可生长形成Ｌ型菌落或非菌落形式存在的Ｌ型巨形体;大肠杆菌和蜡样芽胞杆菌的Ｌ型在含２％～６％ＮａＣｌ的Ｌ型培养基上可生长形成Ｌ型菌落或非菌落形式存在的Ｌ型巨形体。涂片染色或返祖试验证实细菌Ｌ型在含０．５％ＮａＣｌ的Ｌ型培养基或常规细菌学培养基上亦可生存。非菌落性Ｌ型巨形体和丝形体是细菌Ｌ型在琼脂培养基上广泛的存在形式。     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Effect of the composition of reversion medium on change of Staphylococcus aureus lysostaphin protoplasts to coccal forms and L-forms

The experimental conditions under which protoplasts of Staphylococcus aureus strain MS353 (pCp) are converted to the coccal or L-form were investigated. Protoplasts prepared by treating coccal MS353 (pCp) strain with Lysostaphin formed various types of colonies (coccal form, L-form and mixed types) in about 50% yield when they were plated on reversion (R) medium consisting of 2% brain heart infusion, 0.5M sodium succinate, 0.01% bovine serum albumin, 20 mM MgCl2 and 0.6% agar. The L-form type colonies with a typical fried-egg appearance that developed on the R medium at an early stage gradually reverted to the coccal form through a mixed type stage in which a high density area first appeared in the periphery of the colony and then spread throughout the colony. The use of modified R medium without MgCl2 or R medium in which 0.5M sodium succinate as an osmotic stabilizer was replaced by 7.5% NaCl resulted in marked delay in the appearance of reverted cells. R medium without bovine serum albumin yielded atypical L-form type colonies, which contained masses of coccal cells with very irregular margins. On the other hand, R medium without MgCl2 but with penicillin G supported development of L-form type colonies at high rate (13-15%) from the inoculated protoplasts.     

Transformation ofStreptomyces lincolnensis protoplasts with plasmid vectors

A method for the preparation and regeneration of protoplasts of Streptomyces lincolnensis is described. Mycelium in the early exponential phase appeared to be most suitable for this purpose and yielded up to 25% regenerated intact cells. Transformation of S. lincolnensis protoplasts was achieved using broad-host-range streptomycete plasmid vectors pIJ622, pMP66, pRS410 and pIJ943 constructed from replicons pIJ101, pSLG33 and SCP2. The efficiency of transformation was 3.10(3) transformants per micrograms plasmid DNA when (2-5).10(7) recipient protoplasts were used. Interspecific transformations showed that there is no efficient restriction system in S. lincolnensis that would limit the transfer of genetic information from S. lividans or E. coli.     

The methods of protoplast formation and transformation of Streptomyces strains

Factors influencing formation, regeneration and transformation of protoplasts in streptomyces are described. Conditions for formation and regeneration of protoplasts in 4 industrial strains producing the macrolide antibiotic tylosin were studied. It was demonstrated possible to apply the method for transformation of the S. lividans type culture to 3 industrial strains of S. griseus producing grisin, an antibiotic used as a feed additive. Potential increasing of the efficiency of protoplast transformation and transfection in various actinomycetous strains including industrial ones is discussed. The stimulating effect of lyposomes on transformation of protoplasts in S. lividans 66 with DNA of plasmids pVG101 and pIJ350 as well as transfection with DNA of phages SH10 and KS404 was shown. The tylosin resistance genes in S. fradiae strain B45 were cloned which enabled isolating the cluster of the genes participating in tylosin biosynthesis.     

Cloning and expression of a lignin peroxidase gene from Streptomyces viridosporus in Streptomyces lividans.

A lignin peroxidase gene was cloned from Streptomyces viridosporus T7A into Streptomyces lividans TK64 in plasmid pIJ702. BglII-digested genomic DNA (4-10 kb) of S. viridosporus was shotgun-cloned into S. lividans after insertion into the melanin (mel+) gene of pIJ702. Transformants expressing pIJ702 with insert DNA were selected based upon the appearance of thiostrepton resistant (tsrr)/mel-colonies on regeneration medium. Lignin peroxidase-expressing clones were isolated from this population by screening of transformants on a tsr-poly B-411 dye agar medium. In the presence of H2O2 excreted by S. lividans, colonies of lignin peroxidase-expressing clones decolorized the dye. Among 1000 transformants screened, 2 dye-decolorizing clones were found. One, pIJ702/TK64.1 (TK64.1), was further characterized. TK64.1 expressed significant extracellular 2,4-dichlorophenol (2.4-DCP) peroxidase activity (= assay for S. viridosporus lignin peroxidase). Under the cultural conditions employed, plasmidless S. lividans TK64 had a low background level of 2.4-DCP oxidizing activity. TK64.1 excreted an extracellular peroxidase not observed in S. lividans TK64, but similar to S. viridosporus lignin peroxidase ALip-P3, as shown by activity stain assays on nondenaturing polyacrylamide gels. The gene was located on a 4 kb fragment of S. viridosporus genomic DNA. When peroxidase-encoding plasmid, pIJ702.LP, was purified and used to transform three different S. lividans strains (TK64, TK23, TK24), all transformants tested decolorized poly B-411. When grown on lignocellulose in solid state processes, genetically engineered S. lividans TK64.1 degraded the lignocellulose slightly better than did S. lividans TK64. This is the first report of the cloning of a bacterial gene coding for a lignin-degrading enzyme.