Expressing accessory proteins in cellulolytic <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> to improve the conversion yield of recalcitrant cellulose

Background

A recently constructed cellulolytic Yarrowia lipolytica is able to grow efficiently on an industrial organosolv cellulose pulp, but shows limited ability to degrade crystalline cellulose. In this work, we have further engineered this strain, adding accessory proteins xylanase II (XYNII), lytic polysaccharide monooxygenase (LPMO), and swollenin (SWO) from Trichoderma reesei in order to enhance the degradation of recalcitrant substrate.

Results

The production of EG I was enhanced using a promoter engineering strategy. This provided a new cellulolytic Y. lipolytica strain, which compared to the parent strain, exhibited higher hydrolytic activity on different cellulosic substrates. Furthermore, three accessory proteins, TrXYNII, TrLPMOA and TrSWO, were individually expressed in cellulolytic and non-cellulolytic Y. lipolytica. The amount of rhTrXYNII and rhTrLPMOA secreted by non-cellulolytic Y. lipolytica in YTD medium during batch cultivation in flasks was approximately 62 and 52 mg/L, respectively. The purified rhTrXYNII showed a specific activity of 532 U/mg-protein on beechwood xylan, while rhTrLPMOA exhibited a specific activity of 14.4 U/g-protein when using the Amplex Red/horseradish peroxidase assay. Characterization of rhTrLPMOA revealed that this protein displays broad specificity against β-(1,4)-linked glucans, but is inactive on xylan. Further studies showed that the presence of TrLPMOA synergistically enhanced enzymatic hydrolysis of cellulose by cellulases, while TrSWO1 boosted cellulose hydrolysis only when it was applied before the action of cellulases. The presence of rTrXYNII enhanced enzymatic hydrolysis of an industrial cellulose pulp and of wheat straw. Co-expressing TrXYNII and TrLPMOA in cellulolytic Y. lipolytica with enhanced EG I production procured a novel engineered Y. lipolytica strain that displayed enhanced ability to degrade both amorphous (CIMV-cellulose) and recalcitrant crystalline cellulose in complex biomass (wheat straw) by 16 and 90%, respectively.

Conclusions

This study has provided a potent cellulose-degrading Y. lipolytica strain that co-expresses a core set of cellulolytic enzymes and some accessory proteins. Results reveal that the tuning of cellulase production and the production of accessory proteins leads to optimized performance. Accordingly, the beneficial effect of accessory proteins for cellulase-mediated degradation of cellulose is underlined, especially when crystalline cellulose and complex biomass are used as substrates. Findings specifically underline the benefits and specific properties of swollenin. Although in our study swollenin clearly promoted cellulase action, its use requires process redesign to accommodate its specific mode of action.

     

Mechanisms of laccase-mediator treatments improving the enzymatic hydrolysis of pre-treated spruce

Background

The recalcitrance of softwood to enzymatic hydrolysis is one of the major bottlenecks hindering its profitable use as a raw material for platform sugars. In softwood, the guaiacyl-type lignin is especially problematic, since it is known to bind hydrolytic enzymes non-specifically, rendering them inactive towards cellulose. One approach to improve hydrolysis yields is the modification of lignin and of cellulose structures by laccase-mediator treatments (LMTs).

Results

LMTs were studied to improve the hydrolysis of steam pre-treated spruce (SPS). Three mediators with three distinct reaction mechanisms (ABTS, HBT, and TEMPO) and one natural mediator (AS, that is, acetosyringone) were tested. Of the studied LMTs, laccase-ABTS treatment improved the degree of hydrolysis by 54%, while acetosyringone and TEMPO increased the hydrolysis yield by 49% and 36%, respectively. On the other hand, laccase-HBT treatment improved the degree of hydrolysis only by 22%, which was in the same order of magnitude as the increase induced by laccase treatment without added mediators (19%). The improvements were due to lignin modification that led to reduced adsorption of endoglucanase Cel5A and cellobiohydrolase Cel7A on lignin. TEMPO was the only mediator that modified cellulose structure by oxidizing hydroxyls at the C6 position to carbonyls and partially further to carboxyls. Oxidation of the reducing end C1 carbonyls was also observed. In contrast to lignin modification, oxidation of cellulose impaired enzymatic hydrolysis.

Conclusions

LMTs, in general, improved the enzymatic hydrolysis of SPS. The mechanism of the improvement was shown to be based on reduced adsorption of the main cellulases on SPS lignin rather than cellulose oxidation. In fact, at higher mediator concentrations the advantage of lignin modification in enzymatic saccharification was overcome by the negative effect of cellulose oxidation. For future applications, it would be beneficial to be able to understand and modify the binding properties of lignin in order to decrease unspecific enzyme binding and thus to increase the mobility, action, and recyclability of the hydrolytic enzymes.

     

Lignin triggers irreversible cellulase loss during pretreated lignocellulosic biomass saccharification

Background

Non-productive binding of enzymes to lignin is thought to impede the saccharification efficiency of pretreated lignocellulosic biomass to fermentable sugars. Due to a lack of suitable analytical techniques that track binding of individual enzymes within complex protein mixtures and the difficulty in distinguishing the contribution of productive (binding to specific glycans) versus non-productive (binding to lignin) binding of cellulases to lignocellulose, there is currently a poor understanding of individual enzyme adsorption to lignin during the time course of pretreated biomass saccharification.

Results

In this study, we have utilized an FPLC (fast protein liquid chromatography)-based methodology to quantify free Trichoderma reesei cellulases (namely CBH I, CBH II, and EG I) concentration within a complex hydrolyzate mixture during the varying time course of biomass saccharification. Three pretreated corn stover (CS) samples were included in this study: Ammonia Fiber Expansion^a (AFEX?-CS), dilute acid (DA-CS), and ionic liquid (IL-CS) pretreatments. The relative fraction of bound individual cellulases varied depending not only on the pretreated biomass type (and lignin abundance) but also on the type of cellulase. Acid pretreated biomass had the highest levels of non-recoverable cellulases, while ionic liquid pretreated biomass had the highest overall cellulase recovery. CBH II has the lowest thermal stability among the three T. reesei cellulases tested. By preparing recombinant family 1 carbohydrate binding module (CBM) fusion proteins, we have shown that family 1 CBMs are highly implicated in the non-productive binding of full-length T. reesei cellulases to lignin.

Conclusions

Our findings aid in further understanding the complex mechanisms of non-productive binding of cellulases to pretreated lignocellulosic biomass. Developing optimized pretreatment processes with reduced or modified lignin content to minimize non-productive enzyme binding or engineering pretreatment-specific, low-lignin binding cellulases will improve enzyme specific activity, facilitate enzyme recycling, and thereby permit production of cheaper biofuels.

     

Heterologous expression of <Emphasis Type="Italic">Talaromyces emersonii</Emphasis> cellobiohydrolase Cel7A in <Emphasis Type="Italic">Trichoderma reesei</Emphasis> increases the efficiency of corncob residues saccharification

Objective

Improve the hydrolysis efficiency of the Trichoderma reesei cellulase system by heterologously expressing cellobiohydrolase Cel7A (Te-Cel7A) from the thermophilic fungus Talaromyces emersonii.

Results

Te-Cel7A was expressed in T. reesei under control of the cdna1 promoter and the generated transformant QTC14 could successfully secrete Te-Cel7A into the supernatant using glucose as carbon source. The recombinant Te-Cel7A had a temperature optimum at 65 °C and an optimal pH of 5, which were similar to those from the native host. The culture supernatant of QTC14 exhibited a 28.8% enhancement in cellobiohydrolase activity and a 65.2% increase in filter paper activity relative to that of the parental strain QP4. Moreover, the QTC14 cellulase system showed higher thermal stability than that of the parental strain QP4. In the saccharification of delignified corncob residue, the cellulose conversion of QTC14 showed 13.9% higher than that of QP4 at the end of reaction.

Conclusions

The thermophilic fungus-derived cellulases could be efficiently expressed by T. reesei and the recombinant cellulases had potential applications for biomass conversion.

     

Lipopeptide produced from <Emphasis Type="Italic">Bacillus</Emphasis> sp. W112 improves the hydrolysis of lignocellulose by specifically reducing non-productive binding of cellulases with and without CBMs

Background

Surfactants have attracted increasing interest for their capability to improve the enzymatic hydrolysis of lignocellulosic biomass. Compared to chemical surfactants, biosurfactants have a broader prospect for industrial applications because they are more environmentally friendly and more effective in some researches. Commercial cellulase preparations are mainly composed of endoglucanases (EGs) and cellobiohydrolases (CBHs) that possess carbohydrate-binding modules (CBMs). However, the effects of lipopeptide-type biosurfactants on enzymatic saccharification of lignocellulose and adsorption behaviors of cellulases with CBMs remain unclear.

Results

In this study, we found that Bacillus sp. W112 could produce a lipopeptide-type biosurfactant from untreated biomass, such as wheat bran and Jerusalem artichoke tuber. The lipopeptide could enhance the enzymatic hydrolysis of dilute acid pretreated Giant Juncao grass (DA-GJG) by fungal and bacterial enzymes. The enhancement increased over a range of temperatures from 30 to 50 °C. Lipopeptide was shown to be more effective in promoting DA-GJG saccharification than chemical surfactants at low dosages, with a best stimulatory degree of 20.8% at 2% loading of the substrates (w/w). Lipopeptide increased the thermostability of EG and CBH in commercial cellulase cocktails. Moreover, the dual effects of lipopeptide on the adsorption behaviors of cellulases were found. It specifically lowered the non-productive binding of cellulases to lignin and increased the binding of cellulases to cellulose. In addition, we investigated the influence of lipopeptide on the adsorption behaviors of CBHs with CBMs for the first time. Our results showed that lipopeptide reduced the adsorption of CBM-deleted CBH to DA-GJG to a greater extent than that of intact CBH while the non-productive binding of intact CBH to lignin was reduced more, indicating that lipopeptide decreased the binding of CBMs onto lignin but not their combination with cellulose.

Conclusions

In this study, we found that lipopeptide from Bacillus sp. W112 promoted the enzymatic hydrolysis of DA-GJG at relative low loadings. The stimulatory effect could be attributed to increasing the cellulase thermostability, reducing non-productive adsorption of cellulases with CBMs caused by lignin and enhancing the binding of cellulases to cellulose.

     

Altering the linker in processive GH5 endoglucanase 1 modulates lignin binding and catalytic properties

Background

The non-productive adsorption of cellulases onto lignin in biomass is a key issue for the biofuel process economy. It would be helpful to reduce the inhibitory effect of lignin on enzymatic hydrolysis by engineering weak lignin-binding cellulases. Cellulase linkers are highly divergent in their lengths, compositions, and glycosylations. Numerous studies have revealed that linkers can facilitate optimal interactions between structured domains. Recently, efforts have focused on the contributions and mechanisms of carbohydrate-binding modules and catalytic domains that affect lignin affinity and processivity of cellulases, but our understanding of the effects of the linker regions on lignin adsorption and processivity of GH5 processive endoglucanases is still limited.

Results

Eight GH5 endoglucanase 1 variants of varying length, flexibility, and sequence in the linker region were constructed. Their characteristics were then compared to the wild-type enzyme (EG1). Remarkably, significant differences in the lignin adsorption profiles and processivities were observed for EG1 and other variants. Our studies suggest that either the length or the specific amino acid composition of the linker has a prominent influence on the lignin-binding affinity of the enzymes. Comparatively, the processivity may depend primarily on the length of the linker and less so on the specific amino acid composition. EG1-ApCel5A, a variant with better performance in enzymatic hydrolysis in the presence of lignin, was obtained by replacing a longer, flexible linker. In total, up to between 28.2 and 30.1% more reducing sugars were generated from filter paper by EG1-ApCel5A in the presence of lignin compared to EG1.

Conclusions

Our results highlight the relevance of the linker region in the lignin adsorption and processivity of a processive endoglucanase. Our findings suggest that the linker region may be used as a target for the design of more active and weaker lignin-binding cellulases.

     

Lignocellulose conversion for biofuel: a new pretreatment greatly improves downstream biocatalytic hydrolysis of various lignocellulosic materials

Background

Lignocellulosic biomass is an attractive renewable resource for future liquid transport fuel. Efficient and cost-effective production of bioethanol from lignocellulosic biomass depends on the development of a suitable pretreatment system. The aim of this study is to investigate a new pretreatment method that is highly efficient and effective for downstream biocatalytic hydrolysis of various lignocellulosic biomass materials, which can accelerate bioethanol commercialization.

Results

The optimal conditions for the hydrogen peroxide–acetic acid (HPAC) pretreatment were 80 °C, 2 h, and an equal volume mixture of H₂O₂ and CH₃COOH. Compared to organo-solvent pretreatment under the same conditions, the HPAC pretreatment was more effective at increasing enzymatic digestibility. After HPAC treatment, the composition of the recovered solid was 74.0 % cellulose, 20.0 % hemicelluloses, and 0.9 % lignin. Notably, 97.2 % of the lignin was removed with HPAC pretreatment. Fermentation of the hydrolyzates by S. cerevisiae resulted in 412 mL ethanol kg^?1 of biomass after 24 h, which was equivalent to 85.0 % of the maximum theoretical yield (based on the amount of glucose in the raw material).

Conclusion

The newly developed HPAC pretreatment was highly effective for removing lignin from lignocellulosic cell walls, resulting in enhanced enzymatic accessibility of the substrate and more efficient cellulose hydrolysis. This pretreatment produced less amounts of fermentative inhibitory compounds. In addition, HPAC pretreatment enables year-round operations, maximizing utilization of lignocellulosic biomass from various plant sources.

     

Properties important for solid–liquid separations change during the enzymatic hydrolysis of pretreated wheat straw

Objectives

The biochemical conversion of lignocellulosic biomass into renewable fuels and chemicals provides new challenges for industrial scale processes. One such process, which has received little attention, but is of great importance for efficient product recovery, is solid–liquid separations, which may occur both after pretreatment and after the enzymatic hydrolysis steps. Due to the changing nature of the solid biomass during processing, the solid–liquid separation properties of the biomass can also change. The objective of this study was to show the effect of enzymatic hydrolysis of cellulose upon the water retention properties of pretreated biomass over the course of the hydrolysis reaction.

Results

Water retention value measurements, coupled with ¹H NMR T₂ relaxometry data, showed an increase in water retention and constraint of water by the biomass with increasing levels of cellulose hydrolysis. This correlated with an increase in the fines fraction and a decrease in particle size, suggesting that structural decomposition rather than changes in chemical composition was the most dominant characteristic.

Conclusions

With increased water retained by the insoluble fraction as cellulose hydrolysis proceeds, it may prove more difficult to efficiently separate hydrolysis residues from the liquid fraction with improved hydrolysis.

     

New perspective on glycoside hydrolase binding to lignin from pretreated corn stover

Background

Non-specific binding of cellulases to lignin has been implicated as a major factor in the loss of cellulase activity during biomass conversion to sugars. It is believed that this binding may strongly impact process economics through loss of enzyme activities during hydrolysis and enzyme recycling scenarios. The current model suggests glycoside hydrolase activities are lost though non-specific/non-productive binding of carbohydrate-binding domains to lignin, limiting catalytic site access to the carbohydrate components of the cell wall.

Results

In this study, we have compared component enzyme affinities of a commercial Trichoderma reesei cellulase formulation, Cellic CTec2, towards extracted corn stover lignin using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and p-nitrophenyl substrate activities to monitor component binding, activity loss, and total protein binding. Protein binding was strongly affected by pH and ionic strength. β-d-glucosidases and xylanases, which do not have carbohydrate-binding modules (CBMs) and are basic proteins, demonstrated the strongest binding at low ionic strength, suggesting that CBMs are not the dominant factor in enzyme adsorption to lignin. Despite strong adsorption to insoluble lignin, β-d-glucosidase and xylanase activities remained high, with process yields decreasing only 4–15 % depending on lignin concentration.

Conclusion

We propose that specific enzyme adsorption to lignin from a mixture of biomass-hydrolyzing enzymes is a competitive affinity where β-d-glucosidases and xylanases can displace CBM interactions with lignin. Process parameters, such as temperature, pH, and salt concentration influence the individual enzymes’ affinity for lignin, and both hydrophobic and electrostatic interactions are responsible for this binding phenomenon. Moreover, our results suggest that concern regarding loss of critical cell wall degrading enzymes to lignin adsorption may be unwarranted when complex enzyme mixtures are used to digest biomass.

     

Impacts of long-term plant biomass management on soil phosphorus under temperate grassland

Aims

We assessed and quantified the cumulative impact of 20 years of biomass management on the nature and bioavailability of soil phosphorus (P) accumulated from antecedent fertiliser inputs.

Methods

Soil (0–2.5, 2.5–5, 5–10 cm) and plant samples were taken from replicate plots in a grassland field experiment maintained for 20 years under contrasting plant biomass regimen- biomass retained or removed after mowing. Analyses included dry matter production and P uptake, root biomass, total soil carbon (C), total nitrogen (N), total P, soil P fractionation, and ³¹P NMR spectroscopy.

Results

Contemporary plant production and P uptake were over 2-fold higher for the biomass retained compared with the biomass removed regimes. Soil C, total P, soluble and labile forms of inorganic and organic soil P were significantly higher under biomass retention than removal.

Conclusions

Reserves of soluble and labile inorganic P in soil were significantly depleted in response to continued long-term removal of P in plant biomass compared to retention. However, this was only sufficient to sustain plant production at half the level observed for the biomass retention after 20 years, which was partly attributed to limited mobilisation of organic P in response to P removal.

     

Biomass digestibility is predominantly affected by three factors of wall polymer features distinctive in wheat accessions and rice mutants

Background

Wheat and rice are important food crops with enormous biomass residues for biofuels. However, lignocellulosic recalcitrance becomes a crucial factor on biomass process. Plant cell walls greatly determine biomass recalcitrance, thus it is essential to identify their key factors on lignocellulose saccharification. Despite it has been reported about cell wall factors on biomass digestions, little is known in wheat and rice. In this study, we analyzed nine typical pairs of wheat and rice samples that exhibited distinct cell wall compositions, and identified three major factors of wall polymer features that affected biomass digestibility.

Results

Based on cell wall compositions, ten wheat accessions and three rice mutants were classified into three distinct groups each with three typical pairs. In terms of group I that displayed single wall polymer alternations in wheat, we found that three wall polymer levels (cellulose, hemicelluloses and lignin) each had a negative effect on biomass digestibility at similar rates under pretreatments of NaOH and H₂SO₄ with three concentrations. However, analysis of six pairs of wheat and rice samples in groups II and III that each exhibited a similar cell wall composition, indicated that three wall polymer levels were not the major factors on biomass saccharification. Furthermore, in-depth detection of the wall polymer features distinctive in rice mutants, demonstrated that biomass digestibility was remarkably affected either negatively by cellulose crystallinity (CrI) of raw biomass materials, or positively by both Ara substitution degree of non-KOH-extractable hemicelluloses (reverse Xyl/Ara) and p-coumaryl alcohol relative proportion of KOH-extractable lignin (H/G). Correlation analysis indicated that Ara substitution degree and H/G ratio negatively affected cellulose crystallinity for high biomass enzymatic digestion. It was also suggested to determine whether Ara and H monomer have an interlinking with cellulose chains in the future.

Conclusions

Using nine typical pairs of wheat and rice samples having distinct cell wall compositions and wide biomass saccharification, Ara substitution degree and monolignin H proportion have been revealed to be the dominant factors positively determining biomass digestibility upon various chemical pretreatments. The results demonstrated the potential of genetic modification of plant cell walls for high biomass saccharification in bioenergy crops.

     

Enhanced rates of enzymatic saccharification and catalytic synthesis of biofuel substrates in gelatinized cellulose generated by trifluoroacetic acid

Background

The crystallinity of cellulose is a principal factor limiting the efficient hydrolysis of biomass to fermentable sugars or direct catalytic conversion to biofuel components. We evaluated the impact of TFA-induced gelatinization of crystalline cellulose on enhancement of enzymatic digestion and catalytic conversion to biofuel substrates.

Results

Low-temperature swelling of cotton linter cellulose in TFA at subzero temperatures followed by gentle heating to 55 °C dissolves the microfibril structure and forms composites of crystalline and amorphous gels upon addition of ethanol. The extent of gelatinization of crystalline cellulose was determined by reduction of birefringence in darkfield microscopy, loss of X-ray diffractability, and loss of resistance to acid hydrolysis. Upon freeze-drying, an additional degree of crystallinity returned as mostly cellulose II. Both enzymatic digestion with a commercial cellulase cocktail and maleic acid/AlCl₃-catalyzed conversion to 5-hydroxymethylfurfural and levulinic acid were markedly enhanced with the low-temperature swollen cellulose. Only small improvements in rates and extent of hydrolysis and catalytic conversion were achieved upon heating to fully dissolve cellulose.

Conclusions

Low-temperature swelling of cellulose in TFA substantially reduces recalcitrance of crystalline cellulose to both enzymatic digestion and catalytic conversion. In a closed system to prevent loss of fluorohydrocarbons, the relative ease of recovery and regeneration of TFA by distillation makes it a potentially useful agent in large-scale deconstruction of biomass, not only for enzymatic depolymerization but also for enhancing rates of catalytic conversion to biofuel components and useful bio-products.

     

Optimization of fecal sample preparation for untargeted LC-HRMS based metabolomics

Introduction

Collecting feces is easy. It offers direct outcome to endogenous and microbial metabolites.

Objectives

In a context of lack of consensus about fecal sample preparation, especially in animal species, we developed a robust protocol allowing untargeted LC-HRMS fingerprinting.

Methods

The conditions of extraction (quantity, preparation, solvents, dilutions) were investigated in bovine feces.

Results

A rapid and simple protocol involving feces extraction with methanol (1/3, M/V) followed by centrifugation and a step filtration (10 kDa) was developed.

Conclusion

The workflow generated repeatable and informative fingerprints for robust metabolome characterization.

     

An NIRS-based assay of chemical composition and biomass digestibility for rapid selection of Jerusalem artichoke clones

Background

High-throughput evaluation of lignocellulosic biomass feedstock quality is the key to the successful commercialization of bioethanol production. Currently, wet chemical methods for the determination of chemical composition and biomass digestibility are expensive and time-consuming, thus hindering comprehensive feedstock quality assessments based on these biomass specifications. To find the ideal bioethanol feedstock, we perform a near-infrared spectroscopic (NIRS) assay to rapidly and comprehensively analyze the chemical composition and biomass digestibility of 59 Jerusalem artichoke (Helianthus tuberosus L., abbreviated JA) clones collected from 24 provinces in six regions of China.

Results

The distinct geographical distribution of JA accessions generated varied chemical composition as well as related biomass digestibility (after soluble sugars extraction and mild alkali pretreatment). Notably, the soluble sugars, cellulose, hemicellulose, lignin, ash, and released hexoses, pentoses, and total carbohydrates were rapidly and perfectly predicted by partial least squares regression coupled with model population analyses (MPA), which exhibited significantly higher predictive performance than controls. Subsequently, grey relational grade analysis was employed to correlate chemical composition and biomass digestibility with feedstock quality score (FQS), resulting in the assignment of tested JA clones to five feedstock quality grades (FQGs). Ultimately, the FQGs of JA clones were successfully classified using partial least squares-discriminant analysis model coupled with MPA, attaining a significantly higher correct rate of 97.8% in the calibration subset and 91.1% in the validation subset.

Conclusions

Based on the diversity of JA clones, the present study has not only rapidly and precisely examined the biomass composition and digestibility with MPA-optimized NIRS models but has also selected the ideal JA clones according to FQS. This method provides a new insight into the selection of ideal bioethanol feedstock for high-efficiency bioethanol production.

     

A lost opportunity for science: journals promote data sharing in metabolomics but do not enforce it

Introduction

Data sharing is being increasingly required by journals and has been heralded as a solution to the ‘replication crisis’.

Objectives

(i) Review data sharing policies of journals publishing the most metabolomics papers associated with open data and (ii) compare these journals’ policies to those that publish the most metabolomics papers.

Methods

A PubMed search was used to identify metabolomics papers. Metabolomics data repositories were manually searched for linked publications.

Results

Journals that support data sharing are not necessarily those with the most papers associated to open metabolomics data.

Conclusion

Further efforts are required to improve data sharing in metabolomics.

     

Chemical changes in organic matter after fungal colonization in a nitrogen fertilized and unfertilized Norway spruce forest

Background and aims

Mineralization of soil organic matter (SOM) constitutes a major carbon flux to the atmosphere. The carbon use efficiency (CUE) of the saprotrophic microorganisms mineralizing SOM is integral for soil carbon dynamics. Here we investigate how the CUE is affected by temperature, metabolic conditions, and the molecular complexity of the substrate.

Methods

We incubated O-horizon soil samples (with either ¹³C–glucose or ¹³C–cellulose) from a boreal coniferous forest at 4, 9, 14, and 19 °C, and calculated CUEs based on the amount of ¹³C–CO₂ and ¹³C–labelled microbial biomass produced. The effects of substrate, temperature, and metabolic conditions (representing unlimited substrate supply and substrate limitation) on CUE were evaluated.

Results

CUE from metabolizing glucose was higher as compared to cellulose. A slight decrease in CUE with increasing temperature was observed in glucose amended samples (but only in the range 9–19 °C), but not in cellulose amended samples. CUE differed significantly with metabolic conditions, i.e. CUE was higher during unlimited growth conditions as compared to conditions with substrate limitation.

Conclusions

We conclude that it is integral to account for both differences in CUE during different metabolic phases, as well as complexity of substrate, when interpreting temperature dependence on CUE in incubation studies.

     

Nitrogen fertilization affects bacteria utilizing plant-derived carbon in the rhizosphere of beech seedlings

Background and aims

Variation in fire intensity within an ecosystem is likely to moderate fire effects on plant and soil properties. We tested the effect of fire intensity on grassland biomass, soil microbial biomass, and soil nutrients. Additional tests determined plant-microbe, plant-nutrient, and microbe-nutrient associations.

Methods

A replicated field experiment produced a fire intensity gradient. We measured plant and soil microbial biomasses at peak plant productivity the first growing season after fire. We concurrently measured flux in 11 soil nutrients and soil moisture.

Results

Fire intensity positively affected soil nitrogen, phosphorus (P), and zinc but did not appreciably affect plant biomass, microbial biomass, and other soil nutrients. Plant biomass was seemingly (co-)limited by boron, manganese, and P. Microbial biomass was (co-)limited mainly by P and also iron.

Conclusions

In the Northern Great Plains, plant and soil microbial biomasses were limited mainly by P and some micronutrients. Fire intensity affected soil nutrients, however, pulsed P (due to fire) did not result in appreciable fire intensity effects on plant and microbial biomasses. Variable responses in plant productivity to fire are common and indicate the complexity of factors that regulate plant production after fire.

     

Pranlukast,a novel binding ligand of human Raf1 kinase inhibitory protein

Objectives

To study the binding of pranlukast to hRKIP and its regulatory role in the Raf1/MEK/ERK signal pathway.

Results

NMR and fluorescence experiments demonstrated hRKIP could bind pranlukast with a binding constant of 1016 mM^?1. Residues (Y81, S109 and Y181) on the conserved ligand-binding pocket of hRKIP played a crucial role in binding pranlukast, and their mutations reduced the binding affinity more than 85 %. Furthermore, 25 μM pranlukast could up-regulate the ERK phosphorylation by about 17 %.

Conclusion

Pranlukast may be used as a potential drug precursor for treating hRKIP involved diseases.

     

Inter- and intra-species intercropping of barley cultivars and legume species,as affected by soil phosphorus availability

Aims

Intercropping can improve plant yields and soil phosphorus (P) use efficiency. This study compares inter- and intra-species intercropping, and determines whether P uptake and shoot biomass accumulation in intercrops are affected by soil P availability.

Methods

Four barley cultivars (Hordeum vulgare L.) and three legume species (Trifolium subterreneum, Ornithopus sativus and Medicago truncatula) were selected on the basis of their contrasting root exudation and morphological responses to P deficiency. Monocultures and barley-barley and barley-legume intercrops were grown for 6 weeks in a pot trial at very limiting, slightly limiting and excess available soil P. Above-ground biomass and shoot P were measured.

Results

Barley-legume intercrops had 10–70% greater P accumulation and 0–40% greater biomass than monocultures, with the greatest gains occurring at or below the sub-critical P requirement for barley. No benefit of barley-barley intercropping was observed. The plant combination had no significant effect on biomass and P uptake observed in intercropped treatments.

Conclusions

Barley-legume intercropping shows promise for sustainable production systems, especially at low soil P. Gains in biomass and P uptake come from inter- rather than intra-species intercropping, indicating that plant diversity resulted in decreased competition between plants for P.