Production of endoxylanase with enhanced thermostability by a novel polyextremophilic Bacillus halodurans TSEV1 and its applicability in waste paper deinking

The screening and selection of the culture variables followed by optimization using statistical approaches led to a 23-fold enhancement in thermo-alkali-stable xylanase production by the polyextremophilic Bacillus halodurans TSEV1. The optimization of crucial parameters involved in the extraction of xylanase from the bacterial bran led to a high enzyme recovery. The purified xylanase produced in submerged fermentation (SmF) and solid state fermentation (SSF) was visualized as a single band on SDS-PAGE with a molecular mass of 40 kDa. The SSF-xylanase is optimally active at 78 °C and pH 9.0 and stable in the pH range between 7.0 and 12.0 with a T_1/2 of 65 min at 90 °C, which is higher than that of SmF-xylanase. The higher activation energy, enthalpy of deactivation (ΔH*), free energy change of deactivation (ΔG*) and T_1/2 of SSF-xylanase than these of SmF xylanase further confirmed higher thermostability of the former than the latter. The combination of commercial cellulase and TSEV1 xylanase was highly effective in deinking of waste paper at alkaline pH and elevated temperatures.     

Production and characterization of Penicillium brasilianum pectinases with regard to industrial application

The objective of this study was to evaluate the production of pectinase by an isolated strain of Penicillium brasilianum in a bioreactor and to consider its potential for industrial applications (i.e. fruit juice). The optimization of production was achieved through experimental design. The maximum exo-polygalacturonase (Exo-PG) production in the bioreactor was 53.8?U mL^?1 under the conditions of 180?rpm, an aeration rate of 1.5 vvm, 30?°C, pH_initial of 5.5, 5?×?10⁶ spores mL^?1, 32?g L^?1 pectin, 10?g L^?1 of yeast extract and 0.5?g L^?1 magnesium sulfate and bioproduction for 36?h. The production of Exo-PG in the bioreactor was 1.3 times higher than that obtained in shake flasks, with aeration (1.5 vvm) and agitation (180?rpm) control. The crude enzyme complex, beyond the pectinolytic activity of Exo-PG (53.8?U mL^?1), also contained activity pectin methylesterase (6.0?U mL^?1) and pectin lyase (6.61?U mL^?1). At a crude enzyme complex with a concentration of 0.5% (v/v), viscosity of peach juice was reduced by 11.66%, turbidity was reduced by 13.71% and clarification was increased by 26.92%. Based on the present results, we can conclude that the new strain of isolated P. brasilianum produced high amounts of pectinases in a bioreactor with mechanical agitation, and has the potential to be applied to in the clarification of juices.     

A multi-tolerant low molecular weight mannanase from Bacillus sp. CSB39 and its compatibility as an industrial biocatalyst

Bacillus sp. CSB39, isolated from popular traditional Korean food (Kimchi), produced a low molecular weight, thermostable mannanase (MnCSB39); 571.14 U/mL using locust bean gum galactomannan as a major substrate. It was purified to homogeneity using a simple and effective two-step purification strategy, Sepharose CL-6B and DEAE Sepharose Fast Flow, which resulted in 25.47% yield and 19.32-fold purity. The surfactant-, NaCl-, urea-, and protease-tolerant monomeric protein had a mass of ∼30 kDa as analyzed by SDS-PAGE and galactomannan zymography. MnCSB39 was found to have optimal activity at pH 7.5 and temperature of 70 °C. The enzyme showed ˃55% activity at 5.0–15% (w/v) NaCl, and ˃93% of the initial activity after incubation at 37 °C for 60 min. Trypsin and proteinase K had no effect on MnCBS39. The enzyme showed ˃80% activity in up to 3 M urea. The N-terminal amino acid sequence, ALKGDGX, did not show identity with reported mannanases, which suggests the novelty of our enzyme. Activation energy for galactomannan hydrolysis was 26.85 kJmol⁻¹ with a K_cat of 142.58 × 10⁴ s⁻¹. MnCSB39 had K_m and V_max values of 0.082 mg/mL and 1099 ± 1.0 Umg⁻¹, respectively. Thermodynamic parameters such as ΔH, ΔG, ΔS, Q₁₀, ΔG_E-S, and ΔG_E-T supported the spontaneous formation of products and the high hydrolytic efficiency and feasibility of the enzymatic reaction, which strengthen its novelty. MnCSB39 activity was affected by metal ions, modulators, chelators, and detergents. Mannobiose was the principal end-product of hydrolysis. Bacillus subtilis CSB39 produced a maximum of 1524.44 U mannanase from solid state fermentation of 1 g wheat bran. MnCSB39 was simple to purify, was active at a wide pH and temperature range, multi-stress tolerant and catalyzes a thermodynamically possible reaction, characteristics that suggests its suitability for application as an industrial biocatalyst.     

Effective technological pectinases by Aspergillus carneus NRC1 utilizing the Egyptian orange juice industry scraps

The production of a notable and highly effective pectinase by the local fungal strain Aspergillus carneus NRC1 utilizing the abundant Egyptian orange peels and pulps (OPP) scraps excluded in the orange juice and canning industry was achieved in 5-day submerged fermentation (SMF) cultures, at temperature and pH ranges of 30–55 °C and 5.0–5.5, respectively. Fresh or thawed OPP (6%, w/v) were the most preferable sole carbon source. Pectinase activity was dramatically stimulated by ammonium sulphate as the sole nitrogen source, and at the same time strongly inhibited the production of the other tested enzymes, i.e., cellulases and hemicellulases. The lyophilized enzyme preparation was free from any ochra or aflatoxins. The optimum conditions of this methodology including enzyme and substrate (citrus pectin) concentrations were 40 mg ml^?1 and 7% (w/v), respectively, with pH and temperature of 4.0 and 55 °C, respectively.     

Thermodynamic and kinetic studies for environmentaly friendly Ni(II) biosorption using waste pomace of olive oil factory

The objective of this study is to assess the environmentaly friendly Ni(II) adsorption from synthetic wastewater using waste pomace of olive oil factory (WPOOF). Batch kinetic studies were performed in order to investigate the adsorbent and adsorbate dose, solution pH, agitating speed and temperature. The maximum Ni(II) adsorption was obtained at pH 4.0. The equilibrium nature of Ni(II) adsorption at different temperature was described by the Freundlich, Langmuir and Temkin isotherms. The equilibrium data fit well the Temkin and Langmuir isotherm. The monolayer adsorption capacities of WPOOF as obtained from Langmuir isotherm at 60 °C was found to be 14.80 mg/g. The adsorption mechanism was examined by the FTIR technique. The results of the thermodynamic investigations indicated that the adsorption reactions were spontaneous (ΔG < 0), slightly endothermic (ΔH > 0) and irreversible (ΔS > 0). The pseudo first-order, pseudo second-order, Elovich and intraparticle diffusion kinetic models were used to describe the kinetic data.     

Effects of thermal treatments on pectinesterase activity determined in blood oranges juices

The citrus processing industry aims to maintain turbidity and attractive colour of the juice obtained from Sicilian blood oranges. Nevertheless, the presence of pectinesterase (PE, E.C. 3.1.1.11) causes the loss of these peculiar characteristics, due to precipitation of colloids and very fine pieces of pulp in suspension, with negative effects on colour and clarification of the juices. This study compares total PE activity of Sicilian blood oranges (Sanguinello, Moro, Tarocco) with the blonde cultivar Navel, checking enzyme stability with various pasteurisation times and temperatures conditions. Decimal reduction time and temperature (D and z) as well as the kinetic constant (k) were established to optimise and increase the shelf-life of the pasteurised juice. Finally, a heat treatment (85 °C × 3 min) of both microbiological and enzymatic efficacy has been developed that does not compromise anthocyanin stability; this treatment could be used by the citrus fruit processing industry as a valid alternative in the production of blood orange juices.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.     

Operation of a fixed-bed bioreactor in batch and fed-batch modes for production of inulinase by solid-state fermentation

This work is focused on the inulinase production by solid-state fermentation (SSF) in a fixed-bed reactor (34 cm diameter and 50 cm height) with working capacity of 2-kg of dry substrate operated in batch and fed-batch modes. It was investigated different strategies for feeding the inlet air in the bioreactor (saturated and unsaturated air) as alternative to remove the metabolic heat generated during the microbial growth by evaporative cooling. The kinetic evaluation of the process carried out in batch mode using unsaturated air showed that the evaporative cooling decreasing the mean temperature of the solid-bed, although the enzyme production was lower than that obtained using saturated air. Results showed that maximum enzyme activity (586 ± 63 U gds⁻¹) was obtained in the fed-batch mode using saturated air after 24 h of fermentation. The enzymatic extract obtained by fed-batch mode was characterized and presented optimum temperature and pH in the range of 52–57 °C and 4.8–5.2, respectively. For a temperature range from 40 to 70 °C the enzyme presented decimal reduction time, D-value, ranging from 5748 to 47 h, respectively. For a pH range from 3.5 to 5.5 the enzyme showed good stability, presenting D-values higher than 2622 h. In terms of Michaelis–Mentem parameters were demonstrated that the crude inulinase activity presented higher affinity for substrate sucrose compared to inulin.     

Calcium dependent,alkaline detergent-stable trypsin from the viscera of Goby (Zosterisessor ophiocephalus): Purification and characterization

An alkaline calcium dependent trypsin from the viscera of Goby (Zosterisessor ophiocephalus) was purified to homogeneity with a 16-fold increase in specific activity and 20% recovery. The purified trypsin appeared as a single band on sodium dodecyl sulphate-polyacrylamide gel (SDS-PAGE) and native-PAGE. The enzyme had an estimated molecular weight of 23.2 kDa.The optimum pH was 9.0, and the enzyme was extremely stable in various pH buffers between pH 7.0 and 11.0. The optimum temperature for enzyme activity was 60 °C, and the activity and stability of trypsin was highly dependent on the presence of calcium ion. At 60 °C, Ca²⁺ (5 mM) stimulated the protease activity by 220%. The trypsin kinetic constants, K_m and k_cat, were 0.312 mM and 2.03 s^?1.The enzyme showed high stability towards non-ionic surfactants and oxidizing agent. In addition, the enzyme showed excellent stability and compatibility with some commercial solid and liquid detergents.     

Characterization and use of a bacterial lignin peroxidase with an improved manganese-oxidative activity

Peroxidases are well-known biocatalysts produced by all organisms, especially microorganisms, and used in a number of biotechnological applications. The enzyme DypB from the lignin-degrading bacterium Rhodococcus jostii was recently shown to degrade solvent-obtained fractions of a Kraft lignin. In order to promote the practical use, the N246A variant of DypB, named Rh_DypB, was overexpressed in E. coli using a designed synthetic gene: by employing optimized conditions, the enzyme was fully produced as folded holoenzyme, thus avoiding the need for a further time-consuming and expensive reconstitution step. By a single chromatographic purification step, > 100 mg enzyme/L fermentation broth with a > 90% purity was produced. Rh_DypB shows a classical peroxidase activity which is significantly increased by adding Mn²⁺ ions: kinetic parameters for H₂O₂, Mn²⁺, ABTS, and 2,6-DMP were determined. The recombinant enzyme shows a good thermostability (melting temperature of 63–65 °C), is stable at pH 6–7, and maintains a large part of the starting activity following incubation for 24 h at 25–37 °C. Rh_DypB activity is not affected by 1 M NaCl, 10% DMSO, and 5% Tween-80, i.e., compounds used for dye decolorization or lignin-solubilization processes. The enzyme shows broad dye-decolorization activity, especially in the presence of Mn²⁺, oxidizes various aromatic monomers from lignin, and cleaves the guaiacylglycerol-β-guaiacyl ether (GGE), i.e., the Cα-Cβ bond of the dimeric lignin model molecule of β-O-4 linkages. Under optimized conditions, 2 mM GGE was fully cleaved by recombinant Rh_DypB, generating guaiacol in only 10 min, at a rate of 12.5 μmol/min mg enzyme.

     

Significance of metal ion supplementation in the fermentation medium on the structure and anti-tumor activity of Tuber polysaccharides produced by submerged culture of Tuber melanosporum

The significance of metal ion supplementation in the fermentation medium on the structure and anti-tumor activity of Tuber polysaccharides was systematically studied in the submerged fermentation of Tuber melanosporum. The lowest weight-average molecular weight (M_w) (i.e., 115.3 × 10⁴ g/mol) of intracellular polysaccharides (IPS) was obtained when Mg²⁺ and K⁺ was added in the fermentation medium. The IPS with the lower M_w exhibited a higher inhibition ratio against S-180 tumor cells. The compact conformation of extracellular polysaccharides (EPS) was formed when only K⁺ was supplied in the fermentation medium. Interestingly, EPS with compact conformation exhibited a higher inhibition ratio (i.e., 59.2%) than EPS with branched polymer chain (i.e., 9.2%) against A549 tumor cells. The highest inhibition ratio for EPS with α-glycosidic linkages against the tumor cell line HepG2 reached 32.2% when Mg²⁺ or K⁺ was supplied in the fermentation medium. The addition of metal ion Mg²⁺, K⁺, and their combination to the fermentation medium is a vital factor affecting the structures of Tuber polysaccharides, which further determine their anti-tumor activities. The information obtained in this work will be useful for the efficient and directed production of polysaccharides with anti-tumor activities by the submerged fermentation of edible fungi mycelium.     

Purification and characterization of a novel thermostable α-l-arabinofuranosidase (α-l-AFase) from Chaetomium sp.

The purification and characterization of an extracellular α-l-arabinofuranosidase (α-l-AFase) from Chaetomium sp. was investigated in this report. The α-l-AFase was purified to homogeneity with a purification fold of 1030. The purified α-l-AFase had a specific activity of 20.6 U mg^?1. The molecular mass of the enzyme was estimated to be 52.9 kDa and 51.6 kDa by SDS–PAGE and gel filtration, respectively. The optimal pH and temperature of the enzyme were pH 5.0 and 70 °C, respectively. The enzyme was stable over a broad pH range of 4.0–10.0 and also exhibited excellent thermostability, i.e., the residual activities reached 75% after treatment at 60 °C for 1 h. The enzyme showed strict substrate specificity for the α-l-arabinofuranosyl linkage. The K_m and V_max values for p-nitrophenyl (pNP)-α-l-arabinofuranoside were calculated to be 1.43 mM and 68.3 μmol min^?1 mg^?1 protein, respectively. Furthermore, the gene encoding α-l-AFase was cloned and sequenced and found to contain a catalytic domain belonging to the glycoside hydrolase (GH) family 43 α-l-AFase. The deduced amino acid sequence of the gene showed the highest identity (67%) to the putative α-l-AFase from Neurospora crassa. This is the first report on the purification, characterization and gene sequence of an α-l-AFase from Chaetomium sp.     

Immobilization of α-galactosidase on galactose-containing polymeric beads

Industrial application of α-galactosidase requires efficient methods to immobilize the enzyme, yielding a biocatalyst with high activity and stability compared to free enzyme. An α-galactosidase from tomato fruit was immobilized on galactose-containing polymeric beads. The immobilized enzyme exhibited an activity of 0.62 U/g of support and activity yield of 46%. The optimum pH and temperature for the activity of both free and immobilized enzymes were found as pH 4.0 and 37 °C, respectively. Immobilized α-galactosidase was more stable than free enzyme in the range of pH 4.0–6.0 and more than 85% of the initial activity was recovered. The decrease in reaction rate of the immobilized enzyme at temperatures above 37 °C was much slower than that of the free counterpart. The immobilized enzyme shows 53% activity at 60 °C while free enzyme decreases 33% at the same temperature. The immobilized enzyme retained 50% of its initial activity after 17 cycles of reuse at 37 °C. Under same storage conditions, the free enzyme lost about 71% of its initial activity over a period of 7 months, whereas the immobilized enzyme lost about only 47% of its initial activity over the same period. Operational stability of the immobilized enzyme was also studied and the operational half-life (t_1/2 was determined as 6.72 h for p-nitrophenyl α-d-galactopyranoside (PNPG) as substrate. The kinetic parameters were determined by using PNPG as substrate. The K_m and V_max values were measured as 1.07 mM and 0.01 U/mg for free enzyme and 0.89 mM and 0.1 U/mg for immobilized enzyme, respectively. The synthesis of the galactose-containing polymeric beads and the enzyme immobilization procedure are very simple and also easy to carry out.     

Structural characterization of thermostable,solvent tolerant,cytosafe tannase from Bacillus subtilis PAB2

Tannase production by Bacillus subtilis PAB2, was investigated under solid state fermentation using tamarind seed as sole carbon source and it was found as the highest titer (73.44 U/gds). The enzyme was purified to homogeneity, which showed the molecular mass around 52 kDa (K_m = 0.445 mM, V_max = 125.8 mM/mg/min and K_cat = 2.88 min^–1). The enzyme was found stable in a range of pH (3.0–8.0) and temperature (30–70 °C) with an optimal activity at pH 5.0, pI of 4.4 and at 40 °C temperature. It exhibited half-life (t_1/2) of 4.5 h at 60 °C. The enzyme comprised a typical secondary structure containing α-helix (9.3%), β-pleated sheet (33.6%) and β-turn (17.2%). The native conformation of the enzyme was alike a 44 nm spherical nanoparticle upon aggregation. Thermodynamic parameters of tannase revealed that it was stable at 40 °C and showed Q₁₀, ΔG_d and ΔS_d values of 2.08, 99.37 KJ/mol and 252.38 J mol⁻¹ K⁻¹, respectively. Organic solvents were stimulatory with regard to enzyme activity. Moreover, the altered enzyme activity was determined to be correlated with the changes in structural conformation in presence of inducer and inhibitor. Tannase was explored to have no cytotoxicity on Vero cell line as well as rat model study.     

Screening,selection and development of Bacillus subtilis apr-IBL04 for hyper production of macromolecule alkaline protease

Bacillus subtilis microbe is commonly found in soil and produces proteases on nitrogen and carbon-containing sources and increases the fertility rate by degrading nitrogenous organic materials. The present study was aimed to develop hyper producing mutant strain of B. subtilis for the production of proteases, to improve the process variables by the response surface methodology (RSM) under central composite design (CCD) and the production of protease by the particular mutant strain in a liquid state fermentation media. The mutation of the strain was carried out using ethidium bromide. Pure B. subtilis strain was collected and screened for hyper-production of protease. The production of protease by mutant B. subtilis strain was optimized by varying temperature, inoculum size, pH and incubation time under liquid state fermentation. The CCD model were found to be reliable with r² of 0.999. The maximum enzyme activity of B. subtilis IBL-04 mutant with 3 mL/100 mL inoculum size, 72 h fermentation time, pH 8, and 45 °C temperature was developed with enzyme activity 631.09 U/mL, indicates 1–7-fold increase in enzyme activity than the parent strain having 82.32 U/mL activity. These characteristics render its potential use in industries for pharmaceutical and dairy formulation.     

Characterization and optimization of β-galactosidase immobilization process on a mixed-matrix membrane

β-Galactosidase is an important enzyme catalyzing not only the hydrolysis of lactose to the monosaccharides glucose and galactose but also the transgalactosylation reaction to produce galacto-oligosaccharides (GOS). In this study, β-galactosidase was immobilized by adsorption on a mixed-matrix membrane containing zirconium dioxide. The maximum β-galactosidase adsorbed on these membranes was 1.6 g/m², however, maximal activity was achieved at an enzyme concentration of around 0.5 g/m². The tests conducted to investigate the optimal immobilization parameters suggested that higher immobilization can be achieved under extreme parameters (pH and temperature) but the activity was not retained at such extreme operational parameters. The investigations on immobilized enzymes indicated that no real shift occurred in its optimal temperature after immobilization though the activity in case of immobilized enzyme was better retained at lower temperature (5 °C). A shift of 0.5 unit was observed in optimal pH after immobilization (pH 6.5 to 7). Perhaps the most striking results are the kinetic parameters of the immobilized enzyme; while the Michaelis constant (K_m) value increased almost eight times compared to the free enzyme, the maximum enzyme velocity (V_max) remained almost constant.     

Characterization,purification, and temperature/pressure stability of polyphenol oxidase extracted from plums (Prunus domestica)

In this study, polyphenol oxidase (PPO) was extracted from Prunus domestica and partially purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and ion exchange chromatography. The final purification step revealed a 32.81-fold purification, and the molecular mass was estimated to be 65 kDa by SDS-PAGE. The purified PPO showed enzymatic activity mainly toward five substrates, namely catechol, catechin, 4-methyl catechol, chlorogenic acid, and L-3,4-dihydroxyphenylalanine, whereas it showed no activity toward caffeic acid, ferulic acid, p-coumaric acid, p-cresol, and l-tyrosine. The optimum pH and temperature values were 6.0 and 25 °C, respectively. The enzyme showed high stability in the pH range of 5.0–7.0 and in the temperature range of 25–65 °C. The most effective inhibitors of this enzyme were found to be ascorbic acid and l-cysteine. The thermal inactivation followed a first-order kinetic model, with activation energy of E_a 150.46 ± 1.29 kJ/mol. PPO extracted from plum showed stability at high pressure, with enzyme activation at 500 MPa.     

Pre and post cloning characterization of a β-1,4-endoglucanase from <Emphasis Type="Italic">Bacillus</Emphasis> sp.

Consistent with its precloning characterization from the cellulolytic Bacillus sp., β-1,4-endoglucanase purified from the recombinant E. coli exhibited maximum activity at 60°C and pH 7.0. It was highly specific for CMC hydrolysis, with stability up to 70°C and over a pH range of 6.0–8.0. The K _m and V _max values for CMCase activity of the enzyme were 4.1 mg/ml and 25 μmole/ml min⁻¹, respectively. The purified enzyme was a monomer of 65 kDa, as determined by SDS-PAGE. The presence of sucrose and IPTG in fermentation media increased the endoglucanase activity of the recombinant enzyme to 5.2-folds as compared with that of the actual one.     

Sucrose Synthase in Wild Tomato, Lycopersicon chmielewskii, and Tomato Fruit Sink Strength

Here it is reported that sucrose synthase can be readily measured in growing wild tomato fruits (Lycopersicon chmielewskii) when suitable methods are adopted during fruit extraction. The enzyme also was present in fruit pericarp tissues, in seeds, and in flowers. To check for novel characteristics, the wild tomato fruit sucrose synthase was purified, by (NH₄)₂SO₄ fraction and chromatography with DE-32, Sephadex G-200, and PBA-60, to one major band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The following characteristics were obtained: native protein relative molecular weight 380,000; subunit relative molecular weight 89,000; K_m values with: sucrose 53 millimolar, UDP 18.9 micromolar, UDP-glucose 88 micromolar, fructose 8.4 millimolar; pH optima between 6.2 to 7.3 for sucrose breakdown and 7 to 9 for synthesis; and temperature optima near 50°C. The enzyme exhibited a high affinity and a preference for uridylates. The enzyme showed more sensitivity to divalent cations in the synthesis of sucrose than in its breakdown. Sink strength in tomato fruits also was investigated in regard to sucrose breakdown enzyme activities versus fruit weight gain. Sucrose synthase activity was consistently related to increases in fruit weight (sink strength) in both wild and commercial tomatoes. Acid and neutral invertases were not, because the published invertase activity values were too variable for quantitative analyses regarding the roles of invertases in tomato fruit development. In rapidly growing fruits of both wild and commercially developed tomato plants, the activity of sucrose synthase per growing fruit, i.e. sucrose synthase peak activity X fruit size, was linearly related to final fruit size; and the activity exceeded fruit growth and carbon import rates by at least 10-fold. In mature, nongrowing fruits, sucrose synthase activities approached nil values. Therefore, sucrose synthase can serve as an indicator of sink strength in growing tomato fruits.