Dimer initiation sequence of HIV-1Lai genomic RNA: NMR solution structure of the extended duplex.

The genome of all retrovirus consists of two copies of genomic RNA which are noncovalently linked near their 5' end. A sequence localized immediately upstream from the splice donor site inside the HIV-1 psi-RNA region was identified as the domain responsible for the dimerization initiation. It was shown that a kissing complex and a stable dimer are both involved in the HIV-1Lai RNA dimerization process in vitro. The NCp7 protein activates the dimerization by converting a transient loop-loop complex into a more stable dimer. The structure of this transitory loop-loop complex was recently elucidated by Mujeeb et al. In work presented here, we use NMR spectroscopy to determine the stable extended dimer structure formed from a 23 nucleotides RNA fragment, part of the 35 nucleotides SL1 sequence. By heating to 90 degrees C, then slowly cooling this sequence, we were able to show that an extended dimer is formed. We present evidence for the three dimensional structure of this dimer. NMR data yields evidence for a zipper like motif A8A9.A16 existence. This motif enables the surrounding bases to be positioned more closely and permit the G7 and C17 bases to be paired. This is different to other related sequences where only the kissing complex is observed, we suggest that the zipper like motif AA.A could be an important stabilization factor of the extended duplex.     

On the stability of different experimental dimeric structures of the SL1 sequence from the genomic RNA of HIV-1 in solution: a molecular dynamics simulation and electrophoresis study

SL1 is a stem-loop RNA sequence from the genome of HIV-1 thought to be the initiation site for the dimerization of the retroviral genomic RNA. The aim of this study is to check the stability in solution of different experimental dimeric structures available in the literature. Two kinds of dimer have been evidenced: an extended duplex looking like a double helix with two internal bulges and a kissing complex in which the monomers with a stem/loop conformation are linked by intermolecular loop-loop interactions. Two divergent experimental structures of the kissing complex from the Lai isolate are reported in the literature, one obtained from NMR (Mujeeb et al., Nature Structural Biology, 1998, Vol. 5, pp. 432-436) and the other one from x-ray crystallography (Ennifar et al., Nature Structural Biology, 2001, Vol. 8, pp. 1064-1068). A crystallographic structure of the Mal isolate was also reported (Ennifar et al., Nature Structure Biology, 2001, Vol. 8, pp. 1064-1068). Concerning the extended duplex, a NMR structure is available for Lai (Girard et al., Journal of Biomolecular Structure and Dynamics, 1999, Vol. 16, pp. 1145-1157) and a crystallographic structure for Mal (Ennifar et al., Structure, 1999, Vol. 7, pp. 1439-1449). Using a molecular dynamics technique, all these experimental structures have been simulated in solution with explicit water and counterions. We show that both extended duplex structures are stable. On the contrary, the crystallographic structures of the Lai and Mal kissing complexes are rapidly destabilized in aqueous environment. Finally, the NMR structure of the Lai loop-loop kissing complex remains globally stable over a 20 ns MD simulation, although large rearrangements occur at the level of the stem/loop junctions that are flexible, as shown from free energy calculations. These results are compared to electrophoresis experiments on dimer formation.     

HIV-1(Lai) genomic RNA: combined used of NMR and molecular dynamics simulation for studying the structure and internal dynamics of a mutated SL1 hairpin

The genome of all retroviruses consists of two identical copies of an RNA sequence associated in a non-covalent dimer. A region upstream from the splice donor (SL1) comprising a self-complementary sequence is responsible for the initiation of the dimerization. This region is able to dimerize in two conformations: a loop-loop complex or an extended duplex. Here, we solve by 2D NMR techniques the solution structure of a 23-nucleotide sequence corresponding to HIV-1 SL1(Lai) in which the mutation G12-->A12 is included to prevent dimerization. It is shown that this monomer adopts a stem-loop conformation with a seven base pairs stem and a nine nucleotide loop containing the G10 C11 A12 C13 G14 C15 sequence. The stem is well structured in an A-form duplex, while the loop is more flexible even though elements of structure are evident. We show that the structure adopted by the stem can be appreciably different from its relaxed structure when the adenines A8, A9 and A16 in the loop are mechanically constrained. This point could be important for the efficiency of the dimerization. This experimental study is complemented with a 10 ns molecular dynamics simulation in the presence of counterions and explicit water molecules. This simulation brings about information on the flexibility of the loop, such as a hinge motion between the stem and the loop and a labile lattice of hydrogen bonds in the loop. The bases of the nucleotides G10 to C15 were found outside of the loop during a part of the trajectory, which is certainly necessary to initiate the dimerization process of the genuine SL1(Lai) sequence.     

Base pairing at the stem-loop junction in the SL1 kissing complex of HIV-1 RNA: a thermodynamic study probed by molecular dynamics simulation

The thermodynamics of the opening/closure process of a GC base pair located at the stem-loop junction of the SL1 sequence from HIV-1(Lai) genomic RNA was investigated in the context of a loop-loop homodimer (or kissing complex) using molecular dynamics simulation. The free energy, enthalpy and entropy changes for the closing reaction are 0 kcal x mol(-1), -11 kcal x mol(-1) and -0.037 kcal x mol(-1) x K(-1) at 300 degrees K respectively. Furthermore it is found that the free energy change is the same for the formation of a 11 nucleotide loop closed with UG and for the formation of a 9 nucleotide loop closed with GC. Our study evidences the high flexibility of the nucleotides at the stem-loop junction explaining the weak stability of this structure.     

Molecular dynamics simulation for probing the flexibility of the 35 nucleotide SL1 sequence kissing complex from HIV-1Lai genomic RNA

The SL1 stem-loop located in the encapsidation domain is responsible for initiating the dimerisation of HIV-1 genomic RNA by means of a loop-loop interaction known as Kissing Complex (KC). The SL1 secondary structure has been predicted as a 35 nucleotides [K. G. Murti, M. Bondurant, and A. Tereba. J Virol 37, 411-419 (1981)] stem-loop composed of a 4 base pairs (bp) terminal duplex, a 4 nt asymmetrical internal loop, a 7 bp internal duplex, and a 9 nt apical loop. Several high resolution structures of the monomer and of KC of a 23 nt sequence containing only the internal duplex and the apical loop of SL1 are available in the literature. No experimental high resolution structure of the complete native SL1 sequence has been reported so far, either for the monomer or for KC. The asymmetrical internal loop has been described from NMR studies of different monomeric hairpin sequences, leading to divergent results, which suggests its high flexibility. In this work, we built a SL1(35) KC model which was submitted to a 31 ns molecular dynamics simulation (MD). Our results allows to describe the internal dynamics of SL1(35) KC and the differences of behavior of the different parts of the dimer. Thus, we could show the stability of the interactions between the two apical loops and of the terminal duplexes, the destabilization of the internal duplexes and the high flexibility of the asymmetrical internal loops.     

NMR structure of the full-length linear dimer of stem-loop-1 RNA in the HIV-1 dimer initiation site

The packaging signal of HIV-1 RNA contains a stem-loop structure, SL1, which serves as the dimerization initiation site for two identical copies of the genome and is important for packaging of the RNA genome into the budding virion and for overall infectivity. SL1 spontaneously dimerizes via a palindromic hexanucleotide sequence in its apical loop, forming a metastable kissing dimer form. Incubation with nucleocapsid protein causes this form to refold to a thermodynamically stable mature linear dimer. Here, we present an NMR structure of the latter form of the full-length SL1 sequence of the Lai HIV-1 isolate. The structure was refined using nuclear Overhauser effect and residual dipolar coupling data. The structure presents a symmetric homodimer of two RNA strands of 35 nucleotides each; it includes five stems separated by four internal loops. The central palindromic stem is surrounded by two symmetric adenine-rich 1-2 internal loops, A-bulges. All three adenines in each A-bulge are stacked inside the helix, consistent with the solution structures of shorter SL1 constructs determined previously. The outer 4-base pair stems and, proximal to them, purine-rich 1-3 internal loops, or G-bulges, are the least stable parts of the molecule. The G-bulges display high conformational variability in the refined ensemble of structures, despite the availability of many structural restraints for this region. Nevertheless, most conformations share a similar structural motif: a guanine and an adenine from opposite strands form a GA mismatch stacked on the top of the neighboring stem. The two remaining guanines are exposed, one in the minor groove and another in the major groove side of the helix, consistent with secondary structure probing data for SL1. These guanines may be recognized by the nucleocapsid protein, which binds tightly to the G-bulge in vitro.     

Molecular Dynamics Simulation for Probing the Flexibility of the 35 Nucleotide SL1 Sequence Kissing Complex from HIV-1Lai Genomic RNA

Abstract

The SL1 stem-loop located in the encapsidation domain is responsible for initiating the dimerisation of HIV-1 genomic RNA by means of a loop-loop interaction known as Kissing Complex (KC). The SL1 secondary structure has been predicted as a 35 nucleotides [K. G. Murti, M. Bondurant, and A. Tereba. J Virol 37, 411–419 (1981)] stem-loop composed of a 4 base pairs (bp) terminal duplex, a 4 nt asymmetrical internal loop, a 7 bp internal duplex, and a 9 nt apical loop. Several high resolution structures of the monomer and of KC of a 23 nt sequence containing only the internal duplex and the apical loop of SL1 are available in the literature. No experimental high resolution structure of the complete native SL1 sequence has been reported so far, either for the monomer or for KC. The asymmetrical internal loop has been described from NMR studies of different monomeric hairpin sequences, leading to divergent results, which suggests its high flexibility. In this work, we built a SL1₃₅ KC model which was submitted to a 31 ns molecular dynamics simulation (MD).

Our results allows to describe the internal dynamics of SL1₃₅ KC and the differences of behavior of the different parts of the dimer. Thus, we could show the stability of the interactions between the two apical loops and of the terminal duplexes, the destabilization of the internal duplexes and the high flexibility of the asymmetrical internal loops.     

Solution studies of the dimerization initiation site of HIV-1 genomic RNA.

Dimerization of HIV-1 genomic RNA is an essential step of the viral cycle, initiated at a conserved stem-loop structure which forms a 'kissing complex' involving loop-loop interactions (dimerization initiation site, DIS). A 19mer RNA oligonucleotide (DIS-19) has been synthesized which forms a stable symmetrical dimer in solution at millimolar concentrations. Dimerization does not depend on addition of Mg2+. RNA ligation experiments unambiguously indicate that the formed dimer is a stable kissing complex under the NMR experimental conditions.1H NMR resonance assignments were obtained for DIS-19 at 290 K and pH 6.5. Analysis of the pattern of NOE connectivities reveals that the helix formed by loop-loop base pairing is stacked onto the two terminal stems. Non-canonical base pairs between two essential and conserved adenines are found at the junctions between the two intramolecular and the single intramolecular helices.     

Mechanism of nucleocapsid protein catalyzed structural isomerization of the dimerization initiation site of HIV-1

Dimerization of two homologous strands of genomic RNA is an essential feature of retroviral replication. In the human immunodeficiency virus type 1 (HIV-1), a conserved stem-loop sequence, the dimerization initiation site (DIS), has been identified as the domain primarily responsible for initiation of this aspect of viral assembly. The DIS loop contains an autocomplementary hexanucleotide sequence flanked by highly conserved 5' and 3' purines and can form a homodimer through a loop-loop kissing interaction. In a structural rearrangement activated by the HIV-1 nucleocapsid protein (NCp7) and considered to be associated with viral particle maturation, the DIS dimer converts from an intermediate kissing to an extended duplex isoform. Using 2-aminopurine (2-AP) labeled sequences derived from the DIS(Mal) variant and fluorescence methods, the two DIS dimer isoforms have been unambiguously distinguished, allowing a detailed examination of the kinetics of this RNA structural isomerization and a characterization of the role of NCp7 in the reaction. In the presence of divalent cations, the DIS kissing dimer is found to be kinetically trapped and converts to the extended duplex isoform only upon addition of NCp7. NCp7 is demonstrated to act catalytically in inducing the structural isomerization by accelerating the rate of strand exchange between the two hairpin stem helices, without disruption of the loop-loop helix. Observation of an apparent maximum conversion rate for NCp7-activated DIS isomerization, however, requires protein concentrations in excess of the 2:1 stoichiometry estimated for high-affinity NCp7 binding to the DIS kissing dimer, indicating that transient interactions with additional NCp7(s) may be required for catalysis.     

Melting of model HIV-1 stem-loop 1 RNA dimers monitored by 2-aminopurine fluorescence

Viral maturation of HIV-1 involves refolding of its genomic RNA, which is believed to include a rearrangement of the SL1 stem-loop from a metastable conformation called kissing loop dimer (KD) to a stable one termed extended dimer (ED). To investigate this rearrangement in vitro we have studied the thermal melting of the RNA dimers formed by slightly modified 23-nucleotide SL1 RNA of HIV-1 Mal. Local structural changes in the RNA dimers during the melting were monitored by changes in the fluorescence of 2-aminopurine (2AP) incorporated in predetermined positions of RNA. We have shown that the stem regions of both preformed KD and ED melt in the temperature interval from 75 ° C to 90 ° C. Kissing loop interface of the KD RNA is found to be disrupted at lower temperatures from 20 ° C to 55 ° C, at which the stem regions remain intact. Conversion of the preformed KD to ED overcoming the kinetic barrier occurs between 55 ° C and 65 ° C. The melting of "loop-loop" regions in both preformed and newly formed EDs takes place around 70 ° C. Our finding that thermoinduced KD-to-ED conversion is preceded by transient dissociation of loop-loop interface disagrees with a common idea of strand exchange without disruption of loop-loop-contact.     

Structural requirements for nucleocapsid protein-mediated dimerization of avian leukosis virus RNA

The avian leukosis virus (ALV) belongs to the alpha group of retroviruses that are widespread in nature. The 5'-untranslated region of ALV genome contains the L3 element that is important for virus infectivity and the formation of an unstable RNA dimer in vitro. The L3 sequence is predicted to fold into a long stem-loop structure with two internal loops and an apical one. Phylogenetic analysis predicts that the L3 stem-loop is conserved in alpharetroviruses. Furthermore, a significant selection mechanism maintains a palindrome in the apical loop. The nucleocapsid protein of the alpharetroviruses (NCp12) is required for RNA dimer formation and replication in vivo. It is not known whether L3 can be an NCp12-mediated RNA dimerization site able to bind NCp12 with high affinity. Here, we report that NCp12 chaperones formation of a stable ALV RNA dimer through L3. To investigate the NCp12-mediated L3 dimerization reaction, we performed site-directed mutagenesis, gel retardation and heterodimerization assays and analysis of thermostability of dimeric RNAs. We show that the affinity of NCp12 for L3 is lower than its affinity for the microPsi RNA packaging signal. Results show that conservation of a long stem-loop structure and a loop-loop interaction are not required for NCp12-mediated L3 dimerization. We show that the L3 apical stem-loop is sufficient to form an extended duplex and the whole stem-loop L3 cannot be converted by NCp12 into a duplex extending throughout L3. Three-dimensional modelling of the stable L3 dimer supports the notion that the extended duplex may represent the minimal dimer linkage structure found in the genomic RNA.     

Nucleocapsid protein-mediated maturation of dimer initiation complex of full-length SL1 stemloop of HIV-1: sequence effects and mechanism of RNA refolding

Specific binding of HIV-1 viral protein NCp7 to a unique 35-base RNA stem-loop SL1 is critical for formation and packaging of the genomic RNA dimer found within HIV-1 virions. NCp7 binding stimulates refolding of SL1 from a metastable kissing dimer (KD) into thermodynamically stable linear dimer (LD). Using UV melting, gel electrophoresis and heteronuclear NMR, we investigated effects of various site-specific mutations within the full-length SL1 on temperature- or NCp7-induced refolding in vitro. Refolding involved intramolecular melting of SL1 stems but not dissociation of the intermolecular KD interface. Refolding required only two NCp7 molecules per KD but was limited by the amount of NCp7 present, implying that the protein does not catalytically promote refolding. Efficient refolding depended strictly on the presence and, to a lesser degree, on sequence of a highly conserved G-rich internal loop that normally limits thermal stability of the SL1 stem. Adding two base pairs to the lower stem created a hyperstable SL1 mutant that failed to refold, even when bound by NCp7at high stoichiometries. NMR analysis of these kinetically trapped mutant RNA–protein complexes indicated that NCp7 initiates refolding by dissociating base pairs in the upper stem of SL1. This study illuminates structural transitions critical for HIV-1 assembly and replication.     

197 Modeling the maturation pathway of the HIV-1 5’-UTR RNA dimer

HIV-1 genomic RNA is packaged as a dimer into the virions. The initial metastable RNA dimer is believed to be formed by virtue of “kissing interactions” between two copies of the palindromic apical loops of stem-loop SL1 of the 5’-untranslated region (5’-UTR) of the genomic RNA. Viral nucleocapsid protein NCp7 promotes maturation of the RNA dimer into more stable form, which involves extended or linear form of SL1 dimer (reviewed in Paillart et al., 2004; Moore & Hu, 2009; Lu et al., 2011). In vitro experiments have shown that this conversion occurs at stoichiometric amounts of NCp7 without breaking interactions between the two copies of the SL1 apical loops (Mujeeb et al., 2007). We have proposed a hypothetical pathway and calculated models of the intermediate structures for the SL1 stem-loop dimer maturation that does not require simultaneous dissociation of all base pairs in SL1 stems; this pathway involves formation of an RNA analog of the Holliday junction intermediate between the two stems of the SL1 dimer and a following branch migration towards the palindromic duplex (Ulyanov et al., 2011). Here, we extend these models to the dimer of the 1–344 fragment of HIV-1 RNA, which includes all of the 5’-UTR and the gag start AUG codon region, and show that the branch-migration mechanism of the dimer maturation is also feasible for the full 5’-UTR RNA. All RNA models have been calculated with the miniCarlo program (Zhurkin et al., 1991).     

The SL1-SL2 (stem-loop) domain is the primary determinant for stability of the gamma retroviral genomic RNA dimer

Retroviral genomes are assembled from two sense-strand RNAs by noncovalent interactions at their 5' ends, forming a dimer. The RNA dimerization domain is a potential target for antiretroviral therapy and represents a compelling RNA folding problem. The fundamental dimerization unit for the Moloney murine sarcoma gamma retrovirus spans a 170-nucleotide minimal dimerization active sequence. In the dimer, two self-complementary sequences, PAL1 and PAL2, form intermolecular duplexes, and an SL1-SL2 (stem-loop) domain forms loop-loop base pairs, mediated by GACG tetraloops, and extensive tertiary interactions. To develop a framework for assembly of the retroviral RNA dimer, we quantified the stability of and established nucleotide resolution secondary structure models for sequence variants in which each motif was compromised. Base pairing and tertiary interactions between SL1-SL2 domains contribute a large free energy increment of -10 kcal/mol. In contrast, even though the PAL1 and PAL2 intermolecular duplexes span 10 and 16 bp in the dimer, respectively, they contribute only -2.5 kcal/mol to stability, roughly equal to a single new base pair. First, these results emphasize that the energetic costs for disrupting interactions in the monomer state nearly balance the PAL1 and PAL2 base pairing interactions that form in the dimer. Second, intermolecular duplex formation plays a biological role distinct from simply stabilizing the structure of the retroviral genomic RNA dimer.     

Elements located upstream and downstream of the major splice donor site influence the ability of HIV-2 leader RNA to dimerize in vitro

An essential step in the replication cycle of all retroviruses is the dimerization of genomic RNA prior to or during budding and maturation of the viral particle. In HIV-1, a 5' leader region site termed stem-loop 1 (SL1) promotes RNA dimerization in vitro and influences dimerization in vivo. In HIV-2, two sequences promote dimerization of RNA fragments in vitro: the 5'-end of the primer-binding site (PBS) and a stem-loop region homologous to the HIV-1 SL1 sequence. Because HIV-2 RNA constructs of different lengths use these two dimerization signals disproportionately, we hypothesized that other sequences could modulate their relative utilization. Here, we characterized the influence of sequences upstream and downstream of the major splice donor site on the formation of HIV-2 RNA dimers in vitro using a variety of RNA constructs and dimerization and electrophoresis protocols. We first assayed the formation of loose or tight dimers for 1-444 and 1-561 model RNAs. Although both RNAs could form PBS-dependent loose dimers, the 1-561 RNA was unable to make SL1-dependent tight dimers. Using RNAs truncated at their 5'- and/or 3'-ends and by making compensatory base substitutions, we found that two elements interfere with the formation of SL1-dependent tight dimers. The cores of these elements are located at nucleotides 189-196 and 543-550. Our results suggest that base pairing between these sequences prevents the formation of SL1-dependent tight dimers, probably by sequestering SL1 in a stable intramolecular arrangement. Moreover, we found that nucleotides downstream of SL1 decreased the rate of tight dimerization. Interestingly, dimerization at 37 degrees C in the presence of nucleocapsid protein increased the yield of SL1-mediated tight dimerization in vitro, even in the presence of the two interfering elements, suggesting a relationship between the nucleocapsid protein and activation of the SL1 dimerization signal in vivo.     

Conformational pathway for the kissing complex-->extended dimer transition of the SL1 stem-loop from genomic HIV-1 RNA as monitored by targeted molecular dynamics techniques

HIV-1 retroviral genomic RNA dimerization is initiated by loop-loop interactions between the SL1 stem-loops of two identical RNA molecules. The SL1-SL1 unstable resulting kissing complex (KC) then refolds irreversibly into a more stable complex called extended dimer (ED). Although the structures of both types of complex have been determined, very little is known about the conformational pathway corresponding to the transition, owing to the difficulty of observing experimentally intermediate conformations. In this study, we applied targeted molecular dynamics simulation techniques (TMD) to the phosphorus atoms for monitoring this pathway for the backbone, and a two-step strategy was adopted. In a first step, called TMD(-1), the dimer structure was constrained to progressively move away from KC without indicating the direction, until the RMSD from KC reaches 36A. A total of 20 TMD(-1) simulations were performed under different initial conditions and different simulation parameters. For RMSD ranging between 0 and 22A, the whole set of TMD(-1) simulations follows a similar pathway, then divergences are observed. None of the simulations leads to the ED structure. At RMSD=22A, the dimers look like two parallel Us, still linked by the initial loop-loop interaction, but the strands of the stems (the arms of the Us) are positioned in such a manner that they can form intramolecular as well as intermolecular Watson-Crick base-pairs. This family of structure is called UU. In a second step (TMD simulations), 18 structures were picked up along the pathways generated with TMD(-1) and were constrained to move toward ED by decreasing progressively their RMSD from ED. We found that only structures from the UU family are able to easily reach ED-like conformations of the backbones without exhibiting a large constraint energy.     

Convergence of natural and artificial evolution on an RNA loop-loop interaction: the HIV-1 dimerization initiation site

Loop-loop interactions among nucleic acids constitute an important form of molecular recognition in a variety of biological systems. In HIV-1, genomic dimerization involves an intermolecular RNA loop-loop interaction at the dimerization initiation site (DIS), a hairpin located in the 5' noncoding region that contains an autocomplementary sequence in the loop. Only two major DIS loop sequence variants are observed among natural viral isolates. To investigate sequence and structural constraints on genomic RNA dimerization as well as loop-loop interactions in general, we randomized several or all of the nucleotides in the DIS loop and selected in vitro for dimerization-competent sequences. Surprisingly, increasing interloop complementarity above a threshold of 6 bp did not enhance dimerization, although the combinations of nucleotides forming the theoretically most stable hexanucleotide duplexes were selected. Noncanonical interactions contributed significantly to the stability and/or specificity of the dimeric complexes as demonstrated by the overwhelming bias for noncanonical base pairs closing the loop and covariations between flanking and central loop nucleotides. Degeneration of the entire loop yielded a complex population of dimerization-competent sequences whose consensus sequence resembles that of wild-type HIV-1. We conclude from these findings that the DIS has evolved to satisfy simultaneous constraints for optimal dimerization affinity and the capacity for homodimerization. Furthermore, the most constrained features of the DIS identified by our experiments could be the basis for the rational design of DIS-targeted antiviral compounds.     

Identification of the in vitro HIV-2/SIV RNA dimerization site reveals striking differences with HIV-1

Although their genomes cannot be aligned at the nucleotide level, the HIV-1/SIVcpz and the HIV-2/SIVsm viruses are closely related lentiviruses that contain homologous functional and structural RNA elements in their 5'-untranslated regions. In both groups, the domains containing the trans-activating region, the 5'-copy of the polyadenylation signal, and the primer binding site (PBS) are followed by a short stem-loop (SL1) containing a six-nucleotide self-complementary sequence in the loop, flanked by unpaired purines. In HIV-1, SL1 is involved in the dimerization of the viral RNA, in vitro and in vivo. Here, we tested whether SL1 has the same function in HIV-2 and SIVsm RNA. Surprisingly, we found that SL1 is neither required nor involved in the dimerization of HIV-2 and SIV RNA. We identified the NarI sequence located in the PBS as the main site of HIV-2 RNA dimerization. cis and trans complementation of point mutations indicated that this self-complementary sequence forms symmetrical intermolecular interactions in the RNA dimer and suggested that HIV-2 and SIV RNA dimerization proceeds through a kissing loop mechanism, as previously shown for HIV-1. Furthermore, annealing of tRNA(3)(Lys) to the PBS strongly inhibited in vitro RNA dimerization, indicating that, in vivo, the intermolecular interaction involving the NarI sequence must be dissociated to allow annealing of the primer tRNA.