Domain architecture of the bacteriophage phi29 connector protein.

Viral connectors are essential components of the DNA packaging machinery. They interact with nucleic acids and other viral components to translocate DNA inside the viral head. We have attempted to locate the different structural and functional domains of the phage Phi29 connector using a combination of approaches to generate different antigenic probes. Complexes of native connectors with either monoclonal or monospecific antibodies were studied by immunoelectron microscopy and image averaging methods. The data were merged in a model of the connector domain structure at 2-3 nm resolution. This epitope mapping provides a general outline of the folding architecture of the connector polypeptide, following a complicated threading that places the amino and carboxyl-terminals in close alignment in the narrower domain at 2-3 nm from the top of the connector. The appendages are built up by a long and highly immunogenic sequence (amino acid residues 153 to 206). The RNA binding domain forms part of the top of the narrow conical area of the connector, a flexible region that undergoes structural changes during viral morphogenesis. The DNA binding domain is located not far away, 2-3 nm below, in the outer side of the narrow conical part. The precise location of the functional domains of the connector, as well as their relative positions provide the first experimental framework for understanding the connector function.     

The bacteriophage phi 29 head-tail connector shows 13-fold symmetry in both hexagonally packed arrays and as single particles.

The symmetry of the phi 29 head-tail connector is controversial: several studies of two-dimensional arrays of the connector have found a 12-fold symmetry, while a recent study of isolated particles has found a 13-fold symmetry. To investigate whether a polymorphism of the structure might explain these different results, electron microscopy and image analysis were used to study both isolated connectors and particles in hexagonally packed arrays. The hexagonally packed arrays have a P1 symmetry, and the connectors displayed 13 subunits both in the arrays and as isolated single particles. While we do not observe a polymorphism between connectors in two-dimensional arrays and as isolated particles, data show that the connectors can exist with either 12 or 13 subunits. A three-dimensional reconstruction of our 13-fold connector was generated by combining an averaged side-view projection with the known symmetry. The structure of rosettes of the connectors formed in the presence of phi 29 prohead RNA (pRNA) was also examined. These rosettes contain five connectors arranged about a single connector in the center, and this arrangement may reflect an essential role of the pRNA in mediating a symmetry mismatch between either a 12- or 13-fold symmetric connector and a putative fivefold symmetric prohead portal vertex into which the connector fits.     

The three-dimensional structure of a DNA translocating machine at 10 A resolution.

BACKGROUND: Head-tail connectors are viral substructures that are very important in the viral morphogenetic cycle, having roles in the formation of the precursor capsid (prohead), DNA packaging, tail binding to the mature head and in the infection process. Structural information on the connector would, therefore, help us to understand how this structure is related to a multiplicity of functions. RESULTS: Recombinant bacteriophage phi29 connectors have been crystallized in two-dimensional aggregates. An average projection image and a three-dimensional map have been obtained at 8 A and 10 A resolution, respectively, from untilted and tilted images of vitrified specimens of the two-dimensional crystals. The average projection image reveals a central mass surrounding a channel with 12 appendages protruding from the central mass. The three-dimensional map reveals a wide domain surrounded by 12 appendages that interact with the prohead vertex, and a narrow domain that interacts with the bacteriophage tail. At the junction of the two domains, 12 smaller appendages are visualized. A channel runs along the axis of the connector structure and is sufficiently wide to allow a double-stranded DNA molecule to pass through. CONCLUSIONS: The propeller-like structure of the phi29 connector strengthens the notion of the connector rotating during DNA packaging. The groove formed by the two lanes of large and small appendages may act as a rail to prevent the liberation of the connector from the prohead vertex during rotation.     

Conformational changes in bacteriophage phi 29 connector prevents DNA-binding activity

In vitro DNA packaging activity in a defined system derived from bacteriophage phi 29 depends upon the chemical integrity of the connector protein p10. Proteolytic cleavage of p10 rendered the proheads inactive for DNA packaging. A similar treatment on isolated connectors abolished the DNA-binding activity of the native p10, but the general shape and size of the connector was not changed as revealed by electron microscopy. Analytical ultracentrifugation showed that the proteolyzed connectors had a smaller sedimentation coefficient, while amino acid analysis after dialysis of the proteolyzed p10 confirmed the loss of 16 and 19 amino acids from the amino and carboxy termini, respectively. Low angle X-ray scattering revealed that proteolysis was followed by a small decrease in the radius of gyration and a reorganization of the distal domain of the cylindrical inner part of the connector. Characterization of the cleavage sites in the primary sequence allowed us to propose the location of the DNA-binding domain in the connector model.     

Three-dimensional reconstruction of the connector of bacteriophage phi 29 at 1.8 nm resolution

The three-dimensional reconstruction of the connector of bacteriophage phi 29 has been obtained from tilt series of negatively stained tetragonal ordered aggregates under low-dose conditions and up to a resolution of (1/1.8) nm-1. These connectors are built up as dodecamers of only one structural polypeptide (p10). Two connectors form the crystal unit cell, each one facing in the opposite direction with respect to the plane of the crystal and partially overlapping. The main features of the two connectors that build the unit cell were essentially the same, although they were negatively stained in slightly different ways, probably due to their situations with respect to the carbon-coated support grid. The main features of the phi 29 connector structure revealed by this three-dimensional reconstruction are: the existence of two clearly defined domains, one with a diameter of around 14 nm and the other narrower (diameter approximately equal to 7.5 nm); an inner hole running all along the structure (around 7 to 8 nm in height) with a cylindrical profile and an average diameter of 4 nm; a general 6-fold symmetry along the whole structure and a 12-fold one in the wider domain; a clockwise twist of the more contrasted regions of both domains from the narrower towards the wider domain (the direction of DNA encapsidation). These features are compatible with an active role for the connector in the process of DNA packaging.     

Three-dimensional structure of T3 connector purified from overexpressing bacteria.

The bacteriophage T3 connector has been purified from overexpressed protein in Escherichia coli, harboring a plasmid containing the gene encoding p8 protein. The connector, which is composed of 12 copies of p8, has been crystallized in two-dimensional sheets and studied by electron microscopy from negatively stained specimens. A two-dimensional Fourier filtering and averaging procedure was performed with crystalline specimens. In addition, single particle averaging techniques were used with other preparations. The average images obtained from these two approaches gave similar results. A three-dimensional reconstruction from two-dimensional crystals of T3 connectors was obtained by collecting several sets of tilted views and using standard Fourier procedures. The resolution of the three-dimensional map was 1.65 nm. The reconstructed connector shows two main domains: a wider one with 12 small units in the periphery and with an external diameter of 14.9 nm, and a smaller one with 8.5 nm diameter. The height of the reconstructed connector has been determined to be around 8.5 nm. The reconstruction clearly shows an internal open channel running along the longitudinal axis of the particle and having an average diameter of 3.7 nm.     

The gpQ portal protein of bacteriophage P2 forms dodecameric connectors in crystals

Double-stranded bacteriophages code for a protein called a connector or portal protein that serves as the entry and exit portal for DNA during genome packaging and ejection, as well as the connection point between heads and tails, and possibly as a nucleator for capsid assembly. The gpQ connector protein from bacteriophage P2 has been overexpressed in Escherichia coli and purified by sucrose gradient centrifugation. Negative stain electron microscopy and image analysis revealed a 135 A diameter dodecameric ring structure with a central 25 A hole. The connector showed a strong propensity to aggregate at low ionic strength and would form microcrystalline structures in solution. Consequently, the connectors were crystallized by hanging-drop vapor diffusion against low ionic strength buffer. Two crystal forms were observed: a P4(1)22 form with unit cell parameters a=b=96.33 A and c=454.42 A that diffracted X-rays to 4.5 A resolution and an I222 crystal form with a=168.86 A, b=171.88 A and c=168.68 A that diffracted to 4.1A resolution. Self-rotation functions confirmed the presence of 12-fold symmetry in the crystals.     

Patency Outcomes of Aortic Connectors

OBJECTIVE:: Controlled outcome analysis of mechanical aortic connectors for proximal saphenous vein bypass graft anastomosis is lacking. We report the clinical and angiographic outcome of patients receiving the Symmetry aortic connector (St. Jude Medical, Inc St. Paul, MN, US) within a multicenter, prospective, randomized study. METHODS:: Twenty-five patients at 3 study sites received aortic connectors at the time of coronary artery bypass surgery. Protocol-defined angiographic follow-up was completed in 19 of 25 patients (76%) at time-points up to 14 months postoperatively; 32 connector anastomoses were evaluated in these 19 patients. Beating heart surgery was performed in 17 patients, and 2 were performed with cardiopulmonary bypass. Age was 69.7 ± 8.1 year; all patients were males. RESULTS:: The connector anastomosis patency rate was 15.6% (5/32). There were no deaths during the follow-up period. Four patients (21%) suffered myocardial infarction and 2 additional patients (10.5%) required percutaneous coronary interventions; one of who required 3 percutaneous coronary interventions, the other received one percutaneous coronary intervention. CONCLUSIONS:: In this nonrandomized cohort of patients, occlusion rate with Symmetry connectors was significantly greater than anticipated. Patients who have received these connectors during coronary artery bypass surgery may require closer follow-up and evaluation. While the manufacturer has stopped producing this device, there has been no recall of the product, clinical support remains ongoing, and next generation connectors have now been marketed. Consideration should be given to discontinuation of the clinical use of Symmetry connectors.     

Structure of the connector of bacteriophage T7 at 8A resolution: structural homologies of a basic component of a DNA translocating machinery

The three-dimensional structure of the bacteriophage T7 head-to-tail connector has been obtained at 8A resolution using cryo-electron microscopy and single-particle analysis from purified recombinant connectors. The general morphology of the T7 connector is that of a 12-folded toroidal homopolymer with a channel that runs along the longitudinal axis of the particle. The structure of the T7 connector reveals many structural similarities with the connectors from other bacteriophages. Docking of the atomic structure of the varphi29 connector into the three-dimensional reconstruction of T7 connector reveals that the narrow, distal region of the two oligomers are almost identical. This region of the varphi29 connector has been suggested to be involved in DNA translocation, and is composed of an alpha-beta-alpha-beta-beta-alpha motif. A search for alpha-helices in the same region of the T7 three-dimensional map has located three alpha-helices in approximately the same position as those of the varphi29 connector. A comparison of the predicted secondary structure of several bacteriophage connectors, including among others T7, varphi29, P22 and SPP1, reveals that, despite the lack of sequence homology, they seem to contain the same alpha-beta-alpha-beta-beta-alpha motif as that present in the varphi29 connector. These results allow us to suggest a common architecture related to a basic component of the DNA translocating machinery for several viruses.     

Structure and protein composition of the bacteriophage T2L connector]

Methods of isolating structural bacteriophage T2 fragments containing: 1. a fragment consisting of a connector, tail tube and contracted sheath; 2. a fragment consisting of a free head, a connector and contracted sheath; 3. a fraction of some free tail tube and some free connectors; 4. a fraction of some free tail, free connectors and free fibers. The following parameters of connector consisting from a neck and a sleeve, which in its turn consists of a cap and a leg, are determined by means of electrone microscopy: 1) the length and the diameter of a cap and a sleeve being 45 and 145 A respectively; 2) the length and the diameter of a sleeve leg being 45 and 85 A respectively; 3) the length and the diameter of a connector neck being 85 and 70 A respectively. Polyacrylamide gel electrophoresis revealed in connectors proteins having molecular weight of 14 000, 15 000, 26 000 and 35 000 daltons.     

The influence of the oscillation angle and the neck anteversion of the prosthesis on the cup safe-zone that fulfills the criteria for range of motion in total hip replacements. The required oscillation angle for an acceptable cup safe-zone

A normal hip joint has more than 120 degrees flexion. The reduced range of motion (ROM) of total hip arthroplast leads to frequent prosthetic impingement, subluxation and dislocation. Prosthetic impingement may be more serious for metal-on-metal and ceramic-on-ceramic total hip prosthesis (THP). A larger oscillation angle of THP (OsA) and proper cup and neck positions make a larger theoretical ROM of a patient's artificial hip joint. But what OsA is required and what range of cup positions is kinetically accepted are not clearly understood. A ROM of more than 120 degrees flexion, 45 degrees internal-rotation at 90 degrees flexion, 30 degrees extension and 40 degrees external-rotation was defined as severe criteria for an acceptable ROM. Theoretical cup safe-zones were created that fulfill the severe criteria of ROM for (OsA=110 degrees , 120 degrees , 135 degrees ) by the mathematical formulas. The size of the cup safe-zone mainly depends on the size of the OsA. There is no cup safe-zone for 110 degrees OsA, an extremely small safe-zone for 120 degrees OsA and an acceptable safe-zone for 135 degrees OsA. Each THP has its own OsA, because OsA is the function of head and neck diameter and cup design. More than 135 degrees OsA enlarges the safe-zone of the prosthetic position, so it extends the acceptable range of error that surgeons cannot avoid completely. However, few THPs with more than 135 degrees OsA are currently clinically available. Both surgeons and manufacturers must realize that OsA is as essential as cup and neck orientations for ROM.     

The bacteriophage phi29 head-tail connector imaged at high resolution with the atomic force microscope in buffer solution.

The surfaces of two- and three-dimensional phi29 connector crystals were imaged in buffer solution by atomic force microscopy (AFM). Both topographies show a rectangular unit cell with dimensions of 16.5 nm x 16.5 nm. High resolution images of connectors from the two-dimensional crystal surface show two connectors per unit cell confirming the p42(1)2 symmetry. The height of the connector was estimated to be at least 7.6 nm, a value close to that found in previous studies using different techniques. The 12 subunits of the wide connector domain were clearly resolved and showed a right-handed vorticity. The channel running along the connector had a diameter of 3.7 nm in the wide domain, while it was 1.7 nm in the narrow domain end, thus suggesting a tronco-conical channel shape. Moreover, the narrow connector end appears to be rather flexible. When the force applied to the stylus was between 50 and 100 pN, the connector end was fully extended. At forces of approximately 150 pN, these ends were pushed towards the crystal surface. The complementation of the AFM data with the three-dimensional reconstruction obtained from electron microscopy not only confirmed the model proposed, but also offers new insights that may help to explain the role of the connector in DNA packing.     

A new tandem repeat in bovine fibrinogen Aalpha gene

In this study, we describe intraspecies variation in the alphaC connector region of the bovine fibrinogen Aalpha gene. Sequencing and genotyping of six bovine breeds revealed 7 to 10 tandem repeats in the alphaC connector region. In addition, we observed length differences between B. indicus and B. taurus, with the B. indicus having longer fibrinogen alphaC connectors (10-repeat alleles) than B. taurus (7- and 9-repeats). The difference in tandem repeats may be related to the function of blood coagulation system.     

Co-contraction during static and dynamic knee extensions in ACL deficient subjects.

Co-contraction of the muscles is proposed in the literature as one of the strategies that anterior cruciate ligament deficient (ACLD) subjects can use to compensate the loss of ACL function. This study examined the response of ACLD and control subjects to different shear forces in isometric and slow-dynamic knee extensions. Twelve chronic ACLD and 10 control subjects performed submaximal positioning and slow-dynamic knee extensions (between 45 degrees and 5 degrees of knee flexion) with two external flexion moments both applied at two distances on the lower leg. The shear force was controlled by changing the moment arm without changing the moment. Electromyographic data were collected from knee flexor and extensor muscles. In the analysis of variance, no significant effect of subject group was found in positioning or slow-dynamic tasks across all muscles. The effect of knee angle was significantly different between the subject groups for biceps femoris in positioning and for rectus femoris in slow-dynamic tasks, but these effects were very small and will not have a great impact on the resulting shear forces. There was no interaction between moment arm and subject group. Therefore, the hypothesis that ACLD subjects increase co-contraction in situations with an increased shear load in positioning and slow-dynamic knee extensions could not be confirmed.     

Structural analysis of the bacteriophage T3 head-to-tail connector

The connector protein of bacteriophage T3, p8, has been overexpressed in Escherichia coli. Purification of the oligomers built by several copies of p8 reveals a mixed population of dodecamers and tridecamers. The percentages of these two types of oligomers differ in every culture growth, indicating that assembly of this protein depends upon the conditions of the expression system. Those cultures that generated a majority of dodecamers allowed, after purification of the connectors, the two-dimensional crystallization of the dodecamers in a tetragonal arrangement, while the tridecamers did not form crystals. The processing and averaging of several images of frozen-hydrated crystals and their internal phase comparison shows that the crystals are arranged in a P42(1)2 space group, with cell unit dimensions of 165 x 165 A. The three-dimensional reconstruction generated with images of crystals ranging from 0 degrees to 60 degrees tilt reveals a wide domain surrounded by 12 protrusions and a narrow domain that serves to interact with the tail of the bacteriophage. A channel runs along the connector wide enough to allow the translocation of a double-stranded DNA molecule into the prohead. The general structure of the T3 connector is very similar to those obtained for other nonrelated bacteriophages and strongly suggests that the shape of this important viral structure is intimately related to its function.     

一种新的基于适体和酶切保护分析的超灵敏蛋白质检测方法

以凝血酶适体(aptamer)为例,利用适体和核酸外切酶特性,通过定量PCR扩增建立一种高灵敏的蛋白质检测方法.首先合成3段寡核苷酸序列即凝血酶适体探针,上游连接子和下游连接子.将适体探针与凝血酶温育结合后,再加入核酸外切酶I降解未能结合的探针.接着将保护下来的探针与连接子杂交、连接和对连接产物进行定量PCR .分别建立连接产物标准品浓度与Ct 值的标准曲线和凝血酶浓度与连接产物浓度的标准曲线,通过定量PCR对凝血酶进行定量.结果显示,基于适体的外切酶保护凝血酶检测方法灵敏度较高,连接产物标准品浓度的对数值和Ct 值之间的方程为y =- 2 95x + 33 6 5 (R2 =0. 990 ,P <0 .0 1) ;凝血酶浓度和连接产物浓度对数值之间的方程为y =0 94x - 0 . 2 9(R2 =0 . 998,P <0 . 0 1) ,还对可能影响检测的有关参数举行了探讨.     

The Saanen goat as an animal model for post-laryngectomy research: practical implications

A modern way of voice rehabilitation after total laryngectomy includes the use of shunt valves and tracheostoma valves. Problems of fixation to the surrounding tissue are a major drawback in the use of the shunt valve, heat and moisture exchange (HME) filters and, especially, the tracheostoma valve. To solve these problems different tissue connectors were developed. The main objective was to test the feasibility of these prototypes in a new animal model. Here we discuss the results, problems and complications of the selected Saanen goat model. In this prospective laboratory study, 19 healthy adult female Saanen goats (Capra hircus) were used and observed post-surgically for 12 weeks. Selection criteria such as comparable anatomy to humans and easy handling were used for animal model development. Also a literature search using the Medline and the ISI Web of Science databases was performed. The anatomy of the Saanen goat was investigated in a separate postmortem study. Surgery consisted of a laryngotracheal separation and implantation of a tracheo-oesophageal and tracheostoma tissue connector with fibrin tissue glue. Postoperative care consisted of frequent stoma care, monitoring appetite, weight, vital signs and administration of antibiotics, analgesics and mucolytic agents. All animals survived the surgical procedure. However, postoperative care was extensive, labour intensive and was accompanied by several complications. Eleven animals died spontaneously before the end of the experiment. The tracheostoma tissue connector caused signs of local infection in all cases. There was no evidence of infection around the tracheo-oesophageal tissue connector in 18 cases. It was concluded that the use of goats in this tracheostoma model was associated with major complications and should, therefore, only be used for short-term experiments with intensive care. Additional research is needed to see if clinical application of the tissue connectors is possible in the future.     

Fatty-acid chain tilt angles and directions in dipalmitoyl phosphatidylcholine bilayers.

X-ray diffraction has been applied to determine the various tilt angles and directions (if any) which can be assumed by oriented gel phase multilayers of dipalmitoyl phosphatidylcholine (DPPC) as a function of hydration. We report for the first time that oriented DPPC multilayers with a repeat spacing (d-spacing) of 55.2A at 25 degrees C and 0% relative humidity (RH) have hydrocarbon chains tilted at an angle theta of 21.5 degrees with respect to the bilayer normal. In addition, the chains are tilted along one of the bisectors (omega = 0 degrees) of the hexagonal lattice (8 wide-angle maxima, 2 unique), a phase not previously reported in DPPC studies. At 100% RH, the chain tilt angle and d-spacing increased to approximately 29.0 degrees and 58.9A, respectively. Since at 100% RH only 4 wide-angle maxima are observed, we analyze the data on the assumption that the hydrocarbon chains may rotate independently of the hexagonal lattice (omega = 0-30 degrees), at a fixed chain tilt angle theta (Stamatoff, J.B., et al. 1979. Biophys. J. 25:253-262). The largest observed angle phi made by the wide-angle maxima with the equator is 29.5 degrees corresponding to a theta of approximately 32.6 degrees (omega avg. = 24 degrees) and the sample having a d-spacing of 64.0 A (excess water condition). Finally, theta remains relatively constant (approximately 21.5 degrees) up to a RH of approximately 45% and a d-spacing of 57.8A, after which, with increases in RH, theta increases to a maximum of 32.6 degrees.     

Boundary of pRNA functional domains and minimum pRNA sequence requirement for specific connector binding and DNA packaging of phage phi29.

Bacteriophage phi29 utilizes a viral-encoded 120-base RNA (pRNA) to accomplish dsDNA packaging into a preformed procapsid. Six pRNAs bind to the procapsid and work sequentially. The pRNA contains two functional domains, one for binding to the DNA translocating connector, and the other for interacting with another component of the DNA packaging machinery during DNA translocation. By UV crosslinking, the pRNA was found to bind to the connector specifically and not to the capsid or scaffolding proteins. When purified connectors were incubated with pRNA, rosette-like connector oligomers were observed. These oligomers were found to contain pRNA. A series of deletion mutants of the pRNA were constructed and their ability to perform various tasks involved in phi29 assembly were assayed. The minimum sizes of the pRNA needed for the following activities have been determined: (1) specific binding to procapsid or to connectors; (2) connector or procapsid binding with full efficiency compared with wild-type pRNA; and (3) genomic DNA packaging. In summary, bases 37-91 (55 nt) comprised the minimum sequence required for specific connector binding, although with lower efficiency; bases 6-113 (105 nt with the additional deletion of two nonessential bases, C109 and A106) comprised the minimum sequence required for full connector binding activity; and bases 1-117 comprised the minimum sequence needed for full DNA packaging activity. These data indicate clearly that the helical region composed of bases 1-6 and 113-117 plays a crucial role in DNA translocation, but is dispensable for connector binding. A model for the role of the pRNA in DNA packaging was also presented.     

The PLB measurement for the connector in Phi29 bacteriophage reveals the function of its channel loop

The connector protein, also known as the portal protein, located at the portal vertex in the Phi29 bacteriophage has been found to play a key role in the genome DNA packaging motor. There is a disordered region, composed of 12 sets of 18-residue loops N229–N246, that has been assumed to serve as a “clamp” to retain the DNA within the pressurized capsid when DNA is fully packaged. However, the process remains undefined about how the clamping of DNA occurs and what signal is used to engage the channel loops to clamp the DNA near the end of DNA packaging. In this study, we use the planar lipid bilayer (PLB) membrane technique to study the connector with its loops cleaved. The channel properties are compared with those of the connector with corresponding wild-type loops at different membrane potentials. On the basis of the hypothesis of the Donnan effects in the flashing Brownian ratchet model, we associate the PLB experimental results with the outcomes from the relevant biochemical experiments on the proheads containing the connectors without the loops, which enables us to provide a clear picture about how the DNA clamping occurs. A mathematical relationship between the Donnan potential and the DNA packaging density is established, demonstrating that they are both in essence the same signal that is received and transmitted by the connector to dictate DNA clamping and the termination of DNA packaging. At the end of the study, the PLB technique is proposed as a viral research tool, and its potential use to study the functions of specific domains in a portal protein of the tailed bacteriophages is highlighted.