Study of the thermal behavior of azidohetarenes with differential scanning calorimetry

Thermal properties of azidohetarenes without reactive ortho-substituents, obtained by DSC analysis, were compared with the DSC data of ortho-phenyl and ortho-acyl substituted azidohetarenes, which give ring closure reactions either to indoles or to five-membered heterocycles such as isoxazoles. The reaction temperatures and reaction enthalpies give both information to prepare the reaction conditions and important safety information and were, in addition, used to find out relations between the temperatures or enthalpies with the three different reaction mechanisms.     

A new enzymatic method of nitrile synthesis by Rhodococcus sp. strain YH3-3

The substrate specificity of a novel aldoxime dehydratase from E-pyridine-3-aldoxime assimilating bacterium, Rhodococcus sp. strain YH3-3, was examined. The enzyme catalyzed a dehydration reaction of various aryl- and alkyl-aldoximes to form the corresponding nitriles, but did not act on arylalkyl- and substituted alkyl-aldoximes. Of various aldoximes tested, E-pyridine-3-aldoxime was the most suitable substrate for the enzyme. E-Pyridine-3-aldoxime analogs such as O-acetyl-E-pyridine-3-aldoxime, Z-pyridine-3-aldoxime, and E/Z-pyridine-3-aldehyde-hydrazone also acted as substrates and were converted to 3-cyanopyridine. Heat-treatment of the cells increased the accumulation of 3-cyanopyridine from E-pyridine-3-aldoxime because the nitrile degrading enzyme, nitrile hydratase was inactivated. Under the optimized reaction conditions (pH 7.0, 30°C), various nitriles were synthesized from the corresponding aldoximes in preparative scales with heat-treated cells of the strain. This is the first report on the microbial synthesis of nitriles from aldoximes.     

Determination of the oxidative stability by DSC of vegetable oils from the Amazonian area

Differential scanning calorimetry (DSC) and a Rancimat method apparatus were applied to evaluate the oxidative stability of buriti pulp oil (Mauritia flexuosa Mart), rubber seed oil (Hevea brasiliensis), and passion fruit oil (Passiflora edulis). The Rancimat measurements taken for the oxidative induction times were performed under isothermal conditions at 100 °C and in an air atmosphere. The DSC technique involved the oxidation of oil samples in an oxygen-flow DSC cell. The DSC cell temperature was set at five different isothermal temperatures: 100, 110, 120, 130 and 140 °C. During the oxidation reaction, an increase in heat was observed as a sharp exothermic curve. The value T₀ represents the oxidative induction time, which is determined from the downward extrapolated DSC oxidative curve verses the time axis. These curves indicate a good correlation between the DSC T₀ and oxidative stability index (OSI) values. The DSC method is useful because it consumes less time and less sample.     

Synthesis of glycosyl halides and glycosides via 1-O-sulfonyl derivatives

The reaction of an aldose derivative containing a free anomeric hydroxyl group with trifluoromethanesulfonic anhydride or methanesulfonic anhydride, in the presence of halide ion and s-collidine, furnishes a glycosyl halide; if an alcohol is then introduced, glycoside synthesis is effected in an overall, “one-pot” reaction. Several α-d-glucopyranosides, including disaccharides, have been prepared in high yield by using 2,3,4,6-tetra-O-benzyl-d-glucose as the aldose, and generating the corresponding glycosyl bromide(s) in situ. As a halide-exchange step is incorporated in the reaction sequence, orthoacetate formation was favored in reactions of 2,3,4,6-tetra-O-acetyl-d-glucose, such as occurs with per-O-acetylglycosyl halides. Methanesulfonic anhydride promotes glycosidation or orthoester formation in the absence of halide ion, as well as in its presence, whereas formation of an intermediate glycosyl halide appears to be necessary in order to moderate the more vigorous reactions of the trifluoro derivative. The analogous reaction of methanesulfonyl chloride with an aldose provides a ready route to glycosyl chlorides. Under the conditions employed for these various syntheses, acid-sensitive protecting groups may be used, including cyclic and acyclic acetals and O-trityl substituents.     

Resolution of racemic ketoprofen in organic solvents by lipase from Burkholderia cepacia G63

A lipase from the Burkholderia cepacia strain G63 immobilized on resin was used for the resolution of ketoprofen. To study its catalytic properties in enantioselective esterication, different alcohols and solvents were tested to select the most suitable acyl acceptor and reaction medium. Compared with the low activity of the free lipase, the enzyme activity and E value of the immobilized lipase were significantly enhanced. The enantioselectivity of the immobilized lipase could also be markedly improved by adding a small amount of 18-crown-6. RSM was employed to optimize the reaction parameters. The optimal reaction conditions were: reaction time 22.50 h, additives dosage 0.4322 g (0.33 mmol/mL), and substrate molar ratio 54.11:1. Under optimal conditions, the maximal E value was up to 10.01, which exhibited a better enantioselectivity than some commercial lipases, such as Novozym 435, Lipozyme RM IM and LipozymeTL IM.     

A proposed mechanism for the thermal denaturation of a recombinant Bacillus halmapalus α-amylase—the effect of calcium ions

The thermal stability of a recombinant α-amylase from Bacillus halmapalus α-amylase (BHA) has been investigated using circular dichroism spectroscopy (CD) and differential scanning calorimetry (DSC). This α-amylase is homologous to other Bacillus α-amylases where crystallographic studies have identified the existence of three calcium binding sites in the structure. Denaturation of BHA is irreversible with a T_m of approximately 89 °C and DSC thermograms can be described using a one-step irreversible model. A 5 °C increase in T_m in the presence of 10-fold excess CaCl₂ was observed. However, a concomitant increase in the tendency to aggregate was also observed. The presence of 30–40-fold excess calcium chelator (ethylenediaminetetraacetic acid (EDTA) or ethylene glycol-bis[β-aminoethyl ether] N,N,N′,N′-tetraacetic acid (EGTA)) results in a large destabilization of BHA, corresponding to about 40 °C lower T_m as determined by both CD and DSC. Ten-fold excess EGTA reveals complex DSC thermograms corresponding to both reversible and irreversible transitions, which probably originate from different populations of BHA/calcium complexes. Combined interpretation of these observations and structural information on homologous α-amylases forms the basis for a suggested mechanism underlying the inactivation mechanism of BHA. The mechanism includes irreversible thermal denaturation of different BHA/calcium complexes and the calcium binding equilibria. Furthermore, the model accounts for a temperature-induced reversible structural change associated with calcium binding.     

Evaluation of Structural Changes Induced by High Hydrostatic Pressure in Leuconostoc mesenteroides

Scanning electron microcopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) were used to evaluate structural changes in Leuconostoc mesenteroides cells as a function of high-hydrostatic-pressure treatment. This bacterium usually grows in chains of cells, which were increasingly dechained at elevated pressures. High-pressure treatments at 250 and 500 MPa also caused changes in the external surface and internal structure of cells. Dechaining and blister formation on the surface of cells increased with pressure, as observed in SEM micrographs. TEM studies showed that cytoplasmic components of the cells were affected by high-pressure treatment. DSC studies of whole cells showed increasing denaturation of ribosomes with pressure, in keeping with dense compacted regions in the cytoplasm of pressure-treated cells observed in TEM micrographs. Apparent reduction of intact ribosomes observed in DSC thermograms was related to the reduction in number of viable cells. The results indicate that inactivation of L. mesenteroides cells is mainly due to ribosomal denaturation observed as a reduction of the corresponding peak in DSC thermograms and condensed interior regions of cytoplasm in TEM micrographs.     

Thermal Stability and Decomposition Kinetic Studies of Acyclovir and Zidovudine Drug Compounds

Investigations on thermal behavior of drug samples such as acyclovir and zidovudine are interesting not only for obtaining stability information for their processing in pharmaceutical industry but also for predicting their shelf lives and suitable storage conditions. The present work describes thermal behaviors and decomposition kinetics of acyclovir and zidovudine in solid state, studied by some thermal analysis techniques including differential scanning calorimetry (DSC) and simultaneous thermogravimetry–differential thermal analysis (TG/DTA). TG analysis revealed that thermal degradation of the acyclovir and zidovudine is started at the temperatures of 400°C and 190°C, respectively. Meanwhile, TG–DTA analysis of acyclovir indicated that this drug melts at about 256°C. However, melting of zidovudine occurred at 142°C, which is 100°C before starting its decomposition (242°C). Different heating rates were applied to study the DSC behavior of drug samples in order to compute their thermokinetic and thermodynamic parameters by non-isothermal kinetic methods. Thermokinetic data showed that both drugs at the room temperature have slow degradation reaction rates and long shelf lives. However, acyclovir is considerably more thermally stable than zidovudine.     

Synthesis and Purification of Iodoaziridines Involving Quantitative Selection of the Optimal Stationary Phase for Chromatography

The highly diastereoselective preparation of cis-N-Ts-iodoaziridines through reaction of diiodomethyllithium with N-Ts aldimines is described. Diiodomethyllithium is prepared by the deprotonation of diiodomethane with LiHMDS, in a THF/diethyl ether mixture, at -78 °Cin the dark. These conditions are essential for the stability of the LiCHI₂ reagent generated. The subsequent dropwise addition of N-Ts aldimines to the preformed diiodomethyllithium solution affords an amino-diiodide intermediate, which is not isolated. Rapid warming of the reaction mixture to 0 °C promotes cyclization to afford iodoaziridines with exclusive cis-diastereoselectivity. The addition and cyclization stages of the reaction are mediated in one reaction flask by careful temperature control.Due to the sensitivity of the iodoaziridines to purification, assessment of suitable methods of purification is required. A protocol to assess the stability of sensitive compounds to stationary phases for column chromatography is described. This method is suitable to apply to new iodoaziridines, or other potentially sensitive novel compounds. Consequently this method may find application in range of synthetic projects. The procedure involves firstly the assessment of the reaction yield, prior to purification, by ¹H NMR spectroscopy with comparison to an internal standard. Portions of impure product mixture are then exposed to slurries of various stationary phases appropriate for chromatography, in a solvent system suitable as the eluent in flash chromatography. After stirring for 30 min to mimic chromatography, followed by filtering, the samples are analyzed by ¹H NMR spectroscopy. Calculated yields for each stationary phase are then compared to that initially obtained from the crude reaction mixture. The results obtained provide a quantitative assessment of the stability of the compound to the different stationary phases; hence the optimal can be selected. The choice of basic alumina, modified to activity IV, as a suitable stationary phase has allowed isolation of certain iodoaziridines in excellent yield and purity.     

Molecular interaction of manganese based carbon monoxide releasing molecule (MnCORM) with human serum albumin (HSA)

In the present study, the interaction between the HSA and MnCORM in vitro under physiological conditions, was investigated through ultraviolet-visible (UV-vis) absorption, fluorescence, time-resolved fluorescence, circular dichroism (CD), Fourier transform infrared (FT-IR) spectroscopic techniques and in silico molecular docking methods. Binding parameters such as the binding constant, number of binding sites and binding force were obtained from the fluorescence data. Thermodynamic interaction revealed that the reaction was spontaneous (ΔG < 0) and hydrogen bond and van der Waals interaction were primarily involved in the binding. The changes induced in the secondary structure conformation due to the MnCORM interaction were monitored using CD and FT-IR spectroscopic techniques. The results showed reduction in α-helix conformation and corresponding increase in β-sheet and unordered structures due to slight unfolding. The time-resolved fluorescence decay confirmed the static quenching mechanism of the MnCORM. The molecular docking studies revealed that the MnCORM interacted at Sudlow’s site II of domain IIIA through hydrogen bond and van der Waals interactions. In order to understand the drug distribution and elimination, studies on the drug molecule interaction with HSA are vital. Therefore, it is evident that MnCORM interacts with HSA through ground state complex formation and thus suitable for in vivo delivery.     

The synthesis of 5-amino-2,6-anhydro-5-deoxy-D-glycero-D-gulo-Heptonic acid and its polycondensation to oligomers

5-Amino-2,6-anhydro-5-deoxy-D-glycero-D-gulo-heptonic acid has been synthesized by conventional introduction of an amino function via azide displacement, starting with a suitable derivative of 2,6-anhydro-D-glycero-L-manno-heptonic acid. The amino acid was converted into the methyl ester hydrochloride which, in methanolic sodium methoxide, gave oligomeric and polymeric amides, depending on the conditions applied. Four oligomeric esters, as well as the corresponding N-(2,4-dinitrophenyl) derivatives of the amino acids, could be separated by paper chromatography. The oligomers could be saponified under mild, basic conditions.     

The Reaction of Pt-Antitumor Drugs with Selected Nucleophiles.: II. Preparation and Characterization of Coordination Compounds of Pt(II) andl-Histidine

Various His-Pt(II) coordination compounds were prepared by reaction of K₂PtCl₄ or cis-[Pt(NH₃)₂Cl₂](cis-DDP) with His and analyzed by ¹H and ¹³C NMR spectroscopy, electrophoresis, and ion-exchange chromatography. His may be coordinated to Pt by the imidazol iminogroup and/or the α-aminogroup; the carboxy group remains always free. Both bidentate as well as monodentate ligands were identified. Cis-DDP reacts with His to give a mixture of compounds where all these possibilities are present: cis-diamine-(histidine-N,N-)Pt(II) and three different types of cis-diammine-bis(histidine). HCl trans cleavage of compounds with bidentate His ligands leads to a mixture of two compounds having His ligated to Pt by an amino or imin group. The methods applied are suitable for analyzing reactions of His with cis-DDP under model conditions similar to physiological conditions.     

Green synthesis of metal oxide nanoparticles and their catalytic activity for the reduction of aldehydes

In the present work, a green synthesis of Metal Oxide nanoparticles was demonstrated using the freshly prepared aqueous extract of the immature fruit of Cocos nucifera and the MO nanoparticles were characterized by the analytical techniques such as UV–vis, FT-IR, XRD, SEM, TEM and EDAX. Characterization techniques confirmed that the biomolecules involved in the formation of nanoparticles and also they stabilized the nanoparticles. The synthesized MO nanoparticles were used as catalysts for the reduction of aromatic aldehydes. The reduction was done at mild reaction conditions using ammonium formate as a green hydrogen donor and the corresponding alcohols were obtained in 2–24 h with excellent yields. The reduction reaction was optimized using various solvents, loading of catalyst and at different temperatures.     

Synthesis of catecholamine conjugates with nitrogen-centered bionucleophiles

The enzymatic (tyrosinase) and chemical (NaIO₄, Ag₂O or Frémys’s salt) oxidation of biologically relevant catecholamines, such as dopamine (DA), N-acetyldopamine (NADA) and the Ecstasy metabolites (α-MeDA and N-Me-α-MeDA) generates the corresponding o-quinone which can be trapped with nitrogen bionucleophiles such as N-acetyl-histidine and imidazole in a regioselective reaction that takes place predominantly at the 6-position of the catecholamine.     

Corn porous starch: preparation, characterization and adsorption property

This study was carried out to develop a new type of modified starch based on α-amylase and glucoamylase. The structural and chemical characteristics of the porous starch were determined by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The potential application of the porous starch as an adsorbent was evaluated using methyl violet as an adsorbed model. The adsorption capacity was optimized by investigating the reaction factors, including the mass ratio of α-amylase to glucoamylase (m_α-amylase/m_glucoamylase), the mass ratio of total amount of enzymes to starch (m_enzyme/m_St), the ratio of liquid volume to starch mass (VH₂O/mSt), pH value of the reaction solution, enzymatic reaction temperature, and enzymatic reaction time. The hydrolysis ratio of each sample was also determined to investigate the effect of different reaction conditions on the hydrolysis degree. The results suggest that the porous starch has a more excellent adsorption capacity than the native starch, and may be expected to have wide potential applications in many fields.     

Trans effects in cell membrane transport

The efflux of a substrate from preloaded cells may be decelerated by an inhibitor in the external medium or accelerated by a compatible substrate in the external medium. The derivations of rate equations for the initial velocity of the zero-trans reaction, trans efflux inhibition, and accelerated exchange diffusion are described for steady state conditions. The rate constants making up the Michaelis constant for the trans inhibition reaction are the same as the corresponding parameters in the zero-trans reaction. The rate constants making up the Michaelis constant for the accelerated exchange reaction, however, are different from the corresponding parameters in the zero-trans reaction. The rate equation for trans inhibition shows that the velocity constant for recovery of the unloaded carrier may be determined with steady state experimental data. It is suggested that the observed recovery constant is independent of the substrates and trans inhibitors chosen for an assay of a particular carrier system. An experiment is briefly described to show a determination of a tentative value for the recovery constant of the unloaded nucleoside carrier in yeast cells and the apparent inhibition constant for a trans inhibitor.     

Modeling and optimization of lipase-catalyzed esterification of policosanols with conjugated linoleic acid by response surface methodology

Abstract

The aim of this study was to model the lipase-catalyzed esterification of policosanols with conjugated linoleic acid (CLA) in a solvent-free system to produce wax esters which had a lower melting point than that of their corresponding policosanol forms and to optimize the reaction conditions by response surface methodology (RSM). Novozym 435 was selected as a suitable biocatalyst for the reaction. The molar ratio of substrates (policosanols to CLA) was 1:2. A well-fitting quadratic polynomial regression model for the degree of esterification (DE) of policosanols with CLA was established with regard to temperature (35–65°C), enzyme loading (1–5% of weight of total substrates), and reaction time (10–50 min). Optimal reaction conditions were 61.3°C for temperature, 3.7% for enzyme loading, and 34.1 min for reaction time, and the DE was ? 95 mol% under these conditions. The policosanols and wax esters synthesized under optimal conditions had melting points of 79°C and 57°C, respectively.     

PEGylation kinetics of recombinant hirudin and its application for the production of PEGylated HV2 species

A critical challenge of PEGylation is the production of the desired PEGylated protein form at a high yield. In this study, a kinetic model was constructed successfully to describe the PEGylation reaction of recombinant hirudin variant-2 (HV2) with monomethoxy-PEG-succinimidyl carbonate (mPEG-SC) by fitting the experimental data. Moreover, PEGylation reaction conditions were investigated using the established model and the corresponding experiments to determine the optimal condition to achieve the mono-PEG-HV2 at the desired yield. The model predictions agreed well with the experimental data. Several important process parameters (maximum theoretical yield of mono-PEG-HV2 (y_max), critical PEG/HV2 molar ratio (m_crit) and reaction time to achieve y_max (t_max)) and their mathematical equations were obtained to determine the optimum reaction conditions. Among reaction conditions affecting the PEGylation rates, pH and temperature displayed little effect on y_max, but y_max increased as PEG size increased. Optimal reaction condition to produce mono-PEG-HV2 was as follows: pH and temperature could vary in a certain range; whereas PEG/HV2 molar ratio should be slightly greater than m_crit and the reaction should be stopped at t_max. The results of this study indicate that the proposed reaction kinetic model can provide a possible mechanism interpretation for real PEGylation reactions and optimize efficiently the PEGylation step.     

去辅基天青蛋白两种天然构象共存的热力学证据 ———差热温度扫描和圆二色的研究

天然态蛋白质能否在溶液中存在多种构象是一个有争议的问题 . 在前报道中已经鉴定出绿脓杆菌去辅基天青蛋白突变体 M121L 可以多种构象共存 . 用差热扫描量热和圆二色性的方法研究了野生型去辅基天青蛋白的热变性 . 结果表明在 pH 从 4.0 到 9.0 的范围内存在着两个摩尔热容最大值 . 较低温度下的去折叠反应在所研究 pH 范围内均部分可逆,而较高温度下的去折叠反应均不可逆 . 蛋白质去折叠的热容变化双峰用可相互转化的两种构象共存模型进行拟合 . 较低温度下能够去折叠的构象在 pH 4.0 时占 64% ,在 pH 9.0 时占 55%. 监测热变性过程中圆二色谱在 219 nm 处的信号变化也可以观测到两个独立的去折叠变化 . 信号变化的比值与在相同条件下差热扫描法测得的两种构象摩尔比一致 . 上述结果进一步支持了前文提出的去辅基天青蛋白在溶液中至少存在着两种构象的设想 .