The interactions of cell division protein FtsZ with guanine nucleotides

Prokaryotic cell division protein FtsZ, an assembling GTPase, directs the formation of the septosome between daughter cells. FtsZ is an attractive target for the development of new antibiotics. Assembly dynamics of FtsZ is regulated by the binding, hydrolysis, and exchange of GTP. We have determined the energetics of nucleotide binding to model apoFtsZ from Methanococcus jannaschii and studied the kinetics of 2'/3'-O-(N-methylanthraniloyl) (mant)-nucleotide binding and dissociation from FtsZ polymers, employing calorimetric, fluorescence, and stopped-flow methods. FtsZ binds GTP and GDP with K(b) values ranging from 20 to 300 microm(-1) under various conditions. GTP.Mg(2+) and GDP.Mg(2+) bind with slightly reduced affinity. Bound GTP and the coordinated Mg(2+) ion play a minor structural role in FtsZ monomers, but Mg(2+)-assisted GTP hydrolysis triggers polymer disassembly. Mant-GTP binds and dissociates quickly from FtsZ monomers, with approximately 10-fold lower affinity than GTP. Mant-GTP displacement measured by fluorescence anisotropy provides a method to test the binding of any competing molecules to the FtsZ nucleotide site. Mant-GTP is very slowly hydrolyzed and remains exchangeable in FtsZ polymers, but it becomes kinetically stabilized, with a 30-fold slower k(+) and approximately 500-fold slower k(-) than in monomers. The mant-GTP dissociation rate from FtsZ polymers is comparable with the GTP hydrolysis turnover and with the reported subunit turnover in Escherichia coli FtsZ polymers. Although FtsZ polymers can exchange nucleotide, unlike its eukaryotic structural homologue tubulin, GDP dissociation may be slow enough for polymer disassembly to take place first, resulting in FtsZ polymers cycling with GTP hydrolysis similarly to microtubules.     

Filament Formation of the FtsZ/Tubulin-like Protein TubZ from the Bacillus cereus pXO1 Plasmid

Stable maintenance of low-copy-number plasmids requires partition (par) systems that consist of a nucleotide hydrolase, a DNA-binding protein, and a cis-acting DNA-binding site. The FtsZ/tubulin-like GTPase TubZ was identified as a partitioning factor of the virulence plasmids pBtoxis and pXO1 in Bacillus thuringiensis and Bacillus anthracis, respectively. TubZ exhibits high GTPase activity and assembles into polymers both in vivo and in vitro, and its “treadmilling” movement is required for plasmid stability in the cell. To investigate the molecular mechanism of pXO1 plasmid segregation by TubZ filaments, we determined the crystal structures of Bacillus cereus TubZ in apo-, GDP-, and guanosine 5′-3-O-(thio)triphosphate (GTPγS)-bound forms at resolutions of 2.1, 1.9, and 3.3 Å, respectively. Interestingly, the slowly hydrolyzable GTP analog GTPγS was hydrolyzed to GDP in the crystal. In the post-GTP hydrolysis state, GDP-bound B. cereus TubZ forms a dimer by the head-to-tail association of individual subunits in the asymmetric unit, which is similar to the protofilament formation of FtsZ and B. thuringiensis TubZ. However, the M loop interacts with the nucleotide-binding site of the adjacent subunit and stabilizes the filament structure in a different manner, which indicates that the molecular assembly of the TubZ-related par systems is not stringently conserved. Furthermore, we show that the C-terminal tail of TubZ is required for association with the DNA-binding protein TubR. Using a combination of crystallography, site-directed mutagenesis, and biochemical analysis, our results provide the structural basis of the TubZ polymer that may drive DNA segregation.     

Non-hydrolysable GTP-gamma-S stabilizes the FtsZ polymer in a GDP-bound state

FtsZ, a tubulin homologue, forms a cytokinetic ring at the site of cell division in prokaryotes. The ring is thought to consist of polymers that assemble in a strictly GTP-dependent way. GTP, but not guanosine-5'-O-(3-thiotriphosphate) (GTP-gamma-S), has been shown to induce polymerization of FtsZ, whereas in vitro Ca2+ is known to inhibit the GTP hydrolysis activity of FtsZ. We have studied FtsZ dynamics at limiting GTP concentrations in the presence of 10 mM Ca2+. GTP and its non-hydrolysable analogue GTP-gamma-S bind FtsZ with similar affinity, whereas the non-hydrolysable analogue guanylyl-imidodiphosphate (GMP-PNP) is a poor substrate. Preformed FtsZ polymers can be stabilized by GTP-gamma-S and are destabilized by GDP. As more than 95% of the nucleotide associated with the FtsZ polymer is in the GDP form, it is concluded that GTP hydrolysis by itself does not trigger FtsZ polymer disassembly. Strikingly, GTP-gamma-S exchanges only a small portion of the FtsZ polymer-bound GDP. These data suggest that FtsZ polymers are stabilized by a small fraction of GTP-containing FtsZ subunits. These subunits may be located either throughout the polymer or at the polymer ends, forming a GTP cap similar to tubulin.     

原核生物微管蛋白家族研究进展

自从1992年确定细菌分裂的关键蛋白Fts Z属于微管蛋白家族以来,越来越多的细菌细胞骨架蛋白被发现。原核生物中的微管同源蛋白主要有Fts Z、Cet Z、Tub Z和Btub A/B等。它们与微管蛋白具有相似的三级结构,可以结合鸟嘌呤-5′-三磷酸(Guanosine triphosphate,GTP)自聚合成不同的线状原丝纤维结构:单线状原丝纤维、双螺旋纤维结构或聚集成束状结构,在细菌细胞分裂、维持细胞形态、质粒分离等诸多重要生理功能中起着重要作用。     

Polymerization of nucleotide-free, GDP- and GTP-bound cell division protein FtsZ: GDP makes the difference

Stable, more than 98% nucleotide-free apo-FtsZ was prepared from purified Methanococcus jannaschhi FtsZ. This facilitates the study of the functional mechanisms of this FtsZ, an assembling GTPase, which shares a common fold with eukaryotic tubulin. Apo-FtsZ underwent cooperative magnesium-induced polymerization with a similar critical concentration and morphology related to that of reconstituted GTP-bound FtsZ, suggesting that the binding of GTP contributes insignificantly to the stability of the FtsZ polymers. On the other hand, reconstituted GDP-FtsZ polymerized with a larger critical concentration than GTP-FtsZ, indicating that GDP binding destabilizes FtsZ polymers. Upon GTP hydrolysis by FtsZ polymers, in the absence of a continued GTP supply and under macromolecular crowding conditions enhancing FtsZ polymerization, the straight GTP polymers disappeared and were replaced by characteristic helically curved GDP-bound polymers. These results suggest that the roles of GTP binding and hydrolysis by this archaeal FtsZ are simply to facilitate disassembly. In a physiological situation in GTP excess, GDP-bound FtsZ subunits could again bind GTP, or trigger disassembly, or be recognized by FtsZ filament depolymerizing proteins, allowing the Z-ring dynamics during prokaryotic cell division.     

GTP/GDP binding stabilizes bacterial cell division protein FtsZ against degradation by FtsH protease in vitro

Factors contributing to the stability of bacterial cell division protein FtsZ remain unknown. In order to identify FtsZ-stabilizing factor(s), we exploited FtsH protease-based in vitro FtsZ degradation assay system. Whole cell lysate from an ftsH-null strain of Escherichia coli inhibited degradation of FtsZ by FtsH in vitro. However, activated charcoal-treated lysate did not inhibit degradation. The loss of ability of the activated charcoal-treated lysate to inhibit degradation of FtsZ was restored when it was replenished with GTP, but not when replenished with other NTPs or dNTPs. The lysate did not protect either FtsZ deletion mutants, which do not bind GTP, or FtsH substrates, sigma(32) and cI-108 proteins, against FtsH. GDP and GTPgammaS also stabilized FtsZ against FtsH. Neither GTP nor GDP inhibited proteolytic activity of FtsH per se. These observations demonstrate that binding of GTP/GDP ligands is responsible for the proteolytic stability of FtsZ against FtsH.     

Energetics of the cooperative assembly of cell division protein FtsZ and the nucleotide hydrolysis switch

FtsZ is the first protein recruited to the bacterial division site, where it forms the cytokinetic Z ring. We have determined the functional energetics of FtsZ assembly, employing FtsZ from the thermophilic Archaea Methanococcus jannaschii bound to GTP, GMPCPP, GDP, or GMPCP, under different solution conditions. FtsZ oligomerizes in a magnesium-insensitive manner. FtsZ cooperatively assembles with magnesium and GTP or GMPCPP into large polymers, following a nucleated condensation polymerization mechanism, under nucleotide hydrolyzing and non-hydrolyzing conditions. The effect of temperature on the critical concentration indicates polymer elongation with an apparent heat capacity change of -800 +/- 100 cal mol-1 K-1 and positive enthalpy and entropy changes, compatible with axial hydrophobic contacts of each FtsZ in the polymer, and predicts optimal polymer stability near 75 degrees C. Assembly entails the binding of one medium affinity magnesium ion and the uptake of one proton per FtsZ. Interestingly, GDP- or GMPCP-liganded FtsZ cooperatively form helically curved polymers, with an elongation only 1-2 kcal mol-1 more unfavorable than the straight polymers formed with nucleotide triphosphate, suggesting a physiological requirement for FtsZ polymerization inhibitors. This GTP hydrolysis switch should provide the basic properties for FtsZ polymer disassembly and its functional dynamics.     

Deuterium oxide promotes assembly and bundling of FtsZ protofilaments

The assembly and bundling of FtsZ protofilaments play an important role during bacterial cell division. Deuterium oxide (D2O) is known to have strong stabilization effects on the assembly dynamics of several proteins including tubulin, a homologue of FtsZ. Here, we found that D2O enhanced the light-scattering intensity of the assembly reaction, increased sedimentable polymer mass, and induced bundling of FtsZ protofilaments. D2O also increased the stability of FtsZ polymers under challenged GTP conditions and suppressed dilution-induced disassembly of protofilaments. D2O enhances the assembly parameters of FtsZ and microtubules albeit differently. For example, D2O induced bundling of FtsZ protofilaments, whereas it did not induce bundling of microtubules in vitro. In addition, D2O strongly suppressed the GTP hydrolysis rate of microtubules, but it had no effect on the initial rate of GTP hydrolysis of the FtsZ assembly. D2O (80%) also increased the helical content of FtsZ by 25% compared to the helical content of FtsZ in aqueous buffer. D2O was shown to reduce the binding of 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) to tubulin. In contrast, we found that D2O strongly enhanced the binding of bis-ANS to FtsZ. The results indicated that D2O promotes assembly and bundling of FtsZ protofilaments by increasing hydrophobic interactions between the protofilaments. The results also suggest that the phosphate release rather than the on-site GTP hydrolysis is the rate-limiting step of the GTP turnover reaction.     

Immediate GTP hydrolysis upon FtsZ polymerization

To understand the polymerization dynamics of FtsZ, a bacterial cell division protein similar to tubulin, insight is required into the nature of the nucleotide bound to the polymerized protein. In a previous study, we showed that the FtsZ polymers contain mostly GDP. A recent study challenged this result, suggesting that the polymerized FtsZ is in a GTP-bound state. Here, we show that, when radiolabelled [gamma-32P]-GTP is used to polymerize FtsZ, GTP is hydrolysed instantaneously. The FtsZ polymer contains both GDP and the radiolabelled inorganic phosphate.     

Characterization of Caulobacter crescentus FtsZ protein using dynamic light scattering

The self-assembly of the tubulin homologue FtsZ at the mid-cell is a critical step in bacterial cell division. We introduce dynamic light scattering (DLS) spectroscopy as a new method to study the polymerization kinetics of FtsZ in solution. Analysis of the DLS data indicates that the FtsZ polymers are remarkably monodisperse in length, independent of the concentrations of GTP, GDP, and FtsZ monomers. Measurements of the diffusion coefficient of the polymers demonstrate that their length is remarkably stable until the free GTP is consumed. We estimated the mean size of the FtsZ polymers within this interval of stable length to be between 9 and 18 monomers. The rates of FtsZ polymerization and depolymerization are likely influenced by the concentration of GDP, as the repeated addition of GTP to FtsZ increased the rate of polymerization and slowed down depolymerization. Increasing the FtsZ concentration did not change the size of FtsZ polymers; however, it increased the rate of the depolymerization reaction by depleting free GTP. Using transmission electron microscopy we observed that FtsZ forms linear polymers in solutions which rapidly convert to large bundles upon contact with surfaces at time scales as short as several seconds. Finally, the best studied small molecule that binds to FtsZ, PC190723, had no stabilizing effect on Caulobacter crescentus FtsZ filaments in vitro, which complements previous studies with Escherichia coli FtsZ and confirms that this class of small molecules binds Gram-negative FtsZ weakly.     

Polymerization of Ftsz, a bacterial homolog of tubulin. is assembly cooperative?

FtsZ is a bacterial homolog of tubulin that is essential for prokaryotic cytokinesis. In vitro, GTP induces FtsZ to assemble into straight, 5-nm-wide polymers. Here we show that the polymerization of these FtsZ filaments most closely resembles noncooperative (or "isodesmic") assembly; the polymers are single-stranded and assemble with no evidence of a nucleation phase and without a critical concentration. We have developed a model for the isodesmic polymerization that includes GTP hydrolysis in the scheme. The model can account for the lengths of the FtsZ polymers and their maximum steady state nucleotide hydrolysis rates. It predicts that unlike microtubules, FtsZ protofilaments consist of GTP-bound FtsZ subunits that hydrolyze their nucleotide only slowly and are connected by high affinity longitudinal bonds with a nanomolar K(D).     

Visualization of single Escherichia coli FtsZ filament dynamics with atomic force microscopy

FtsZ, the prokaryotic homologue of tubulin, is an essential cell division protein. In the cell, it localizes at the center, forming a ring that constricts during division. In vitro, it binds and hydrolyzes GTP and polymerizes in a GTP-dependent manner. We have used atomic force microscopy to study the structure and dynamics of FtsZ polymer assembly on a mica surface under buffer solution. The polymers were highly dynamic and flexible, and they continuously rearranged over the surface. End-to-end joining of filaments and depolymerization from internal zones were observed, suggesting that fragmentation and reannealing may contribute significantly to the dynamics of FtsZ assembly. The shape evolution of the restructured polymers manifested a strong inherent tendency to curve. Polymers formed in the presence of non-hydrolyzable nucleotide analogues or in the presence of GDP and AlF(3) were structurally similar but showed a slower dynamic behavior. These results provide experimental evidence supporting the model of single-strand polymerization plus cyclization recently proposed to explain the hydrodynamic behavior of the polymers in solution.     

Rapid in vitro assembly dynamics and subunit turnover of FtsZ demonstrated by fluorescence resonance energy transfer

We have developed an assay for the assembly of FtsZ based on fluorescence resonance energy transfer (FRET). We mutated an innocuous surface residue to cysteine and labeled separate pools with fluorescein (donor) and tetramethylrhodamine (acceptor). When the pools were mixed and GTP was added, assembly produced a FRET signal that was linearly proportional to FtsZ concentration from 0.7 microm (the critical concentration (C(c))) to 3 microm. At concentrations greater than 3 microm, an enhanced FRET signal was observed with both GTP and GDP, indicating additional assembly above this second C(c). This second C(c) varied with Mg(2+) concentration, whereas the 0.7 microm C(c) did not. We used the FRET assay to measure the kinetics of initial assembly by stopped flow. The data were fit by the simple kinetic model used previously: monomer activation, a weak dimer nucleus, and elongation, although with some differences in kinetic parameters from the L68W mutant. We then studied the rate of turnover at steady state by pre-assembling separate pools of donor and acceptor protofilaments. When the pools were mixed, a FRET signal developed with a half-time of 7 s, demonstrating a rapid and continuous disassembly and reassembly of protofilaments at steady state. This is comparable with the 9-s half-time for FtsZ turnover in vivo and the 8-s turnover time of GTP hydrolysis in vitro. Finally, we found that an excess of GDP caused disassembly of protofilaments with a half-time of 5 s. Our new data suggest that GDP does not exchange into intact protofilaments. Rather, our interpretation is that subunits are released following GTP hydrolysis, and then they exchange GDP for GTP and reassemble into new protofilaments, all on a time scale of 7 s. The mechanism may be related to the dynamic instability of microtubules.     

FtsZ polymer-bundling by the Escherichia coli ZapA orthologue, YgfE, involves a conformational change in bound GTP

Cell division is a fundamental process for both eukaryotic and prokaryotic cells. In bacteria, cell division is driven by a dynamic, ring-shaped, cytoskeletal element (the Z-ring) made up of polymers of the tubulin-like protein FtsZ. It is thought that lateral associations between FtsZ polymers are important for function of the Z-ring in vivo, and that these interactions are regulated by accessory cell division proteins such as ZipA, EzrA and ZapA. We demonstrate that the putative Escherichia coli ZapA orthologue, YgfE, exists in a dimer/tetramer equilibrium in solution, binds to FtsZ polymers, strongly promotes FtsZ polymer bundling and is a potent inhibitor of the FtsZ GTPase activity. We use linear dichroism, a technique that allows structure analysis of molecules within linear polymers, to reveal a specific conformational change in GTP bound to FtsZ polymers, upon bundling by YgfE. We show that the consequences of FtsZ polymer bundling by YgfE and divalent cations are very similar in terms of GTPase activity, bundle morphology and GTP orientation and therefore propose that this conformational change in bound GTP reveals a general mechanism of FtsZ bundling.     

Molecular cloning of a cDNA for a small GTP binding protein, BRho, from the embryo of Bombyx mori and its characterization after expression and purification

A cDNA clone encoding a small GTP binding protein (Brho) was isolated from an embryonic cDNA library of Bombyx mori that encoded a polypeptide with 202 amino acids sharing 60-80% similarity with the Rho1 family of GTP binding proteins. The effector site and one of the guanine nucleotide binding sites differed from other members of the Rho family. To characterize the biochemical properties of Brho, the clone was expressed in Escherichia coli as a glutathione S-transferase (GST) fusion protein. The recombinant protein was purified to homogeneity with glutathione S-Sepharose. The fusion protein bound [(35)S] GTPgammaS and [(3)H] GDP with association constants of 11x10(6) M(-1) and 6.2x10(6) M(-1), respectively. The binding of [(35)S] GTPgammaS was inhibited by GTP and GDP, but by no other nucleotides. The calculated GTP-hydrolysis activity was 89.6 m mol/min/mol of Brho. Bound [(35)S] GTPgammaS and [(3)H] GDP were exchanged with GTPgammaS most efficiently in the presence of 6 mM MgCl(2). These results suggest that Brho has a higher affinity for GTP than GDP, converts from the GTP-bound state into the GDP-bound state by intrinsic GTP hydrolytic activity, and returns to the GTP-bound state with the exchange of GDP with GTP. Arch.     

Insights into nucleotide recognition by cell division protein FtsZ from a mant-GTP competition assay and molecular dynamics

Essential cell division protein FtsZ forms the bacterial cytokinetic ring and is a target for new antibiotics. FtsZ monomers bind GTP and assemble into filaments. Hydrolysis to GDP at the association interface between monomers leads to filament disassembly. We have developed a homogeneous competition assay, employing the fluorescence anisotropy change of mant-GTP upon binding to nucleotide-free FtsZ, which detects compounds binding to the nucleotide site in FtsZ monomers and measures their affinities within the millimolar to 10 nM range. We have employed this method to determine the apparent contributions of the guanine, ribose, and the α-, β-, and γ-phosphates to the free energy change of nucleotide binding. Similar relative contributions have also been estimated through molecular dynamics and binding free energy calculations, employing the crystal structures of FtsZ-nucleotide complexes. We find an energetically dominant contribution of the β-phosphate, comparable to the whole guanosine moiety. GTP and GDP bind with similar observed affinity to FtsZ monomers. Loss of the regulatory γ-phosphate results in a predicted accommodation of GDP which has not been observed in the crystal structures. The binding affinities of a series of C8-substituted GTP analogues, known to inhibit FtsZ but not eukaryotic tubulin assembly, correlate with their inhibitory capacity on FtsZ polymerization. Our methods permit testing of FtsZ inhibitors targeting its nucleotide site, as well as compounds from virtual screening of large synthetic libraries. Our results give insight into the FtsZ-nucleotide interactions, which could be useful in the rational design of new inhibitors, especially GTP phosphate mimetics.     

Assembly dynamics of FtsZ rings in Bacillus subtilis and Escherichia coli and effects of FtsZ-regulating proteins

FtsZ is the major cytoskeletal component of the bacterial cell division machinery. It forms a ring-shaped structure (the Z ring) that constricts as the bacterium divides. Previous in vivo experiments with green fluorescent protein-labeled FtsZ and fluorescence recovery after photobleaching have shown that the Escherichia coli Z ring is extremely dynamic, continually remodeling itself with a half time of 30 s, similar to microtubules in the mitotic spindle. In the present work, under different experimental conditions, we have found that the half time for fluorescence recovery of E. coli Z rings is even shorter (approximately 9 s). As before, the turnover appears to be coupled to GTP hydrolysis, since the mutant FtsZ84 protein, with reduced GTPase in vitro, showed an approximately 3-fold longer half time. We have also extended the studies to Bacillus subtilis and found that this species exhibits equally rapid dynamics of the Z ring (half time, approximately 8 s). Interestingly, null mutations of the FtsZ-regulating proteins ZapA, EzrA, and MinCD had only modest effects on the assembly dynamics. This suggests that these proteins do not directly regulate FtsZ subunit exchange in and out of polymers. In B. subtilis, only 30 to 35% of the FtsZ protein was in the Z ring, from which we conclude that a Z ring only 2 or 3 protofilaments thick can function for cell division.     

GTP-dependent polymerization of the tubulin-like RepX replication protein encoded by the pXO1 plasmid of Bacillus anthracis

RepX protein encoded by the pXO1 plasmid of Bacillus anthracis is required for plasmid replication. RepX harbours the tubulin signature motif and contains limited amino acid sequence homology to the bacterial cell division protein FtsZ. Although replication proteins are not known to polymerize, here we show by electron microscopy that RepX undergoes GTP-dependent polymerization into long filaments. RepX filaments assembled in the presence of GTPgammaS were more stable than those assembled in the presence of GTP, suggesting a role for GTP hydrolysis in the depolymerization of the filaments. Light scattering studies showed that RepX underwent rapid polymerization, and substitution of GTP with GTPgammaS stabilized the filaments. RepX exhibited GTPase activity and a mutation in the tubulin signature motif severely impaired its GTPase activity and its polymerization in vitro. Unlike FtsZ homologues, RepX harbours a highly basic carboxyl-terminal region and exhibits GTP-dependent, non-specific DNA binding activity. We speculate that RepX may be involved in both the replication and segregation of the pXO1 plasmid.     

Rate-limiting guanosine 5'-triphosphate hydrolysis during nucleotide turnover by FtsZ, a prokaryotic tubulin homologue involved in bacterial cell division

FtsZ is a prokaryotic tubulin homologue that polymerizes into a dynamic ring during cell division. GTP binding and hydrolysis provide the energy for FtsZ dynamics. However, the precise role of hydrolysis in polymer assembly and turnover is not understood, limiting our understanding of how FtsZ functions in the cell. Here we investigate GTP hydrolysis during the FtsZ polymerization cycle using several complementary approaches that avoid technical caveats of previous studies. We find that at steady state approximately 80% of FtsZ polymer subunits are bound to GTP. In addition, we use pre-steady-state, single turnover assays to directly measure the rate of hydrolysis. Hydrolysis was found to occur at approximately 8/min and to be a rate-limiting step in GTP turnover; phosphate release rapidly followed. These results clarify previously conflicting results in the literature and suggest that pure FtsZ polymers, unlike microtubules, may not be able to undergo dynamic instability or to store energy in the polymer for force production.     

Rapid irreversible G protein alpha subunit misfolding due to intramolecular kinetic bottleneck that precedes Mg2+ "lock" after GTP/GDP exchange

Stoichiometric exchange of GTP for GDP on heterotrimeric G protein alpha (Galpha) subunits is essential to most hormone and neurotransmitter initiated signal transduction. Galphas are stably activated in a Mg2+ complex with GTPgammaS, a nonhydrolyzable GTP analogue that is reported to bind Galpha, with very high affinity. Yet, it is common to find that substantial amounts (30-90%) of purified G proteins cannot be activated. Inactivatable G protein has heretofore been thought to have become "denatured" during formation of the obligatory nucleotide-free or empty (MT) Galpha-state that is intermediary to GDP/GTP exchange at a single binding site. We find Galpha native secondary and tertiary structure to persist during formation of the irreversibly inactivatable state of transducin. MT Galpha is therefore irreversibly misfolded rather than denatured. Inactivation by misfolding is found to compete kinetically with protective but weak preequilibrium nucleotide binding at micromolar ambient GTPgammaS concentrations. Because of the weak preequilibrium, quantitative protection against Galpha aggregation is only achieved at free nucleotide concentrations 10-100 times higher than those commonly employed in G protein radio-nucleotide binding studies. Initial GTP protection is also poor because of the extreme slowness of an intramolecular Galpha refolding step (isomerization) necessary for GTP sequestration after its weak preequilibrium binding. Of the two slowly interconverting Galpha x GTP isomers described here, only the second can bind Mg2+, "locking" GTP in place with a large net rise in GTP binding affinity. A companion Galpha x GDP isomerization reaction is identified as the cause of the very slow spontaneous GDP dissociation that characterizes G protein nucleotide exchange and low spontaneous background activity in the absence of GPCR activation. Galpha x GDP and Galpha x GTP isomerization reactions are proposed as the dual target for GPCR catalysis of nucleotide exchange.