Microwave-assisted conversion of lignocellulosic biomass into furans in ionic liquid

Production of 5-hydroxymethylfurfural (HMF) and furfural from lignocellulosic biomass was studied in ionic liquid in the presence of CrCl₃ under microwave irradiation. Corn stalk, rice straw and pine wood treated under typical reaction conditions produced HMF and furfural in yields of 45–52% and 23–31%, respectively, within 3 min. This method should be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.     

Heat-stable enzymes from extremely thermophilic and hyperthermophilic microorganisms

Only in the last decade have microorganisms been discovered which grow near or above 100°C. The enzymes that are formed by these extremely thermophilic (growth temperature 65 to 85°C) and hyperthermophilic (growth temperature 85 to 110°C) microorganisms are of great interest. This review covers the extracellular and intracellular enzymes of these exotic microorganisms that have recently been described. Polymer-hydrolysing enzymes, such as amylolytic, cellulolytic, hemicellulolytic and proteolytic enzymes, will be discussed. In addition, the properties of the intracellular enzymes involved in carbohydrate and amino-acid metabolism and DNA-binding and chaperones and chaperone-like proteins from hyperthermophiles are described. Due to the unusual properties of these heat-stable enzymes, they are expected to fill the gap between biological and chemical processes.The authors are with the Technical University Hamburg-Harburg, Institute of Biotechnology, Department of Technical Microbiology, Denickestrasse 15, D-21071 Hamburg, Germany     

Oxidative enzymes possess catalytic activity in systems with ionic liquids

Oxidative enzymes, laccase C from Trametes sp. and horseradish and soybean peroxidases, catalyzed oxidation reactions in systems with ionic liquids whose content varied from several volume percent to almost total non-aqueous ionic liquids. Similar to the effects produced by standard organic solvents used in non-aqueous enzymology, catalytic activity of the enzymes was decreased by adding a water-miscible ionic liquid, 4-methyl-N-butylpyridinium tetrafluoroborate, or by suspending the enzyme in a water-immiscible ionic liquid, 1-butyl-3-methylimdizaolium hexafluorophosphate. For the oxidation of anthracene, catalyzed by laccase C and assisted by a number of mediators, addition of 4-methyl-N-butylpyridinium tetrafluoroborate, instead of tert-butanol, increased the yield of the oxidation product several-fold.     

SO3H-functionalized ionic liquid: efficient catalyst for bagasse liquefaction

Liquefaction is a process for the production of biofuel or value-added biochemicals from non-food biomass. SO₃H-, COOH-functionalized and HSO₄-paired imidazolium ionic liquids were shown to be efficient catalysts for bagasse liquefaction in hot compressed water. Using SO₃H-functionalized ionic liquid, 96.1% of bagasse was liquefied and 50.6% was selectively converted to low-boiling biochemicals at 543 K. The degree of liquefaction and selectivity for low-boiling products increased and the average molecular weight of the tetrahydrofuran soluble products decreased with increasing acidic strength of ionic liquids. Analysis of products and comparative characterization of raw materials and residues suggested that both catalytic liquefaction and hydrolysis processes contribute to the high conversion of bagasse. A possible liquefaction mechanism based on the generation of 3-cyclohexyl-1-propanol, one of the main products, is proposed.     

Catalytic conversion of cellulose to chemicals in ionic liquid

A simple and effective route for the production of 5-hydroxymethyl furfural (HMF) and furfural from microcrystalline cellulose (MCC) has been developed. CoSO₄ in an ionic liquid, 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate (IL-1), was found to be an efficient catalyst for the hydrolysis of cellulose at 150 °C, which led to 84% conversion of MCC after 300 min reaction time. In the presence of a catalytic amount of CoSO₄, the yields of HMF and furfural were up to 24% and 17%, respectively; a small amount of levulinic acid (LA) and reducing sugars (8% and 4%, respectively) were also generated. Dimers of furan compounds were detected as the main by-products through HPLC-MS, and with the help of mass spectrometric analysis, the components of gas products were methane, ethane, CO, CO_2, and H₂. A mechanism for the CoSO₄-IL-1 hydrolysis system was proposed and IL-1 was recycled for the first time, which exhibited favorable catalytic activity over five repeated runs. This catalytic system may be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.     

A room temperature ionic liquid as convenient solvent for the oxidative folding of conopeptides

We report the first example of conopeptide oxidation performed in a biocompatible ionic liquid, 1‐ethyl‐3‐methylimidazolium acetate ([C₂mim][OAc]), which enables the efficient formation of both hydrophilic and poorly water‐soluble conotoxins compared with conventional methods. Moreover, the method features a high‐concentration approach ultimately leading to higher yields at reduced separation effort. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Use of ionic liquids in a lipase-facilitated supported liquid membrane

A lipase-facilitated transport of 4-phenoxybutyric acid, 3-phenoxypropionic acid, 2-phenylpropionic acid, 2-phenoxybutyric acid, mandelic acid and 2-amino-2-phenylbutyric acid was carried out using a supported liquid membrane based on room temperature ionic liquids. There were marked differences in the permeate fluxes of various organic acids due to the substrate specificity of the lipases. The maximum permeate flux (44×10^–2 mmol cm^–2×h) was obtained using 4-phenoxybutyric acid as the substrate and 1-n-butyl-3-methylimidazolium hexafluorophosphate as the liquid membrane phase.     

A new aqueous biphasic system containing polypropylene glycol and a water-miscible ionic liquid

In this work, we proposed a novel aqueous biphasic system (ABS) composed of polypropylene glycol P400 (PPG P400) and hydrophilic ionic liquids (IL), 1-alkyl-3-methylimidazolium bromide (alkyl = ethyl or butyl), forming an upper polymer-rich phase and a lower IL-rich phase at ambient temperature. This new ABS can present interesting characteristics shared by ILs and polymers such as low volatility, good solvation ability, tunable physical properties, and high design capacity for achieving task-specific phase components to enhance the partitioning of target species. Ternary phase diagram of the novel ABS formed by PPG 400 and [C(2) mim]Br in water was measured at T = 298.15 K. Factors affecting the binodal curves such as the cation side alkyl chain length and the temperature were also evaluated. The results were successfully interpreted in terms of the kosmotropic/chaotropic nature of ILs. Furthermore, the phase behavior of the PPG-[C(2) mim]Br ABS is described by the NRTL model. Finally, the extraction potential of the proposed ABS was evaluated through its application to the extraction of the essential amino acids such as L-tryptophan and L-tyrosine. The partition coefficients here obtained demonstrated the fine potential of the proposed ABS for biomolecules separation.     

Pantropical trends in mangrove above-ground biomass and annual litterfall

A major paradigm in biosphere ecology is that organic production, carbon turnover and, perhaps, species diversity are highest at tropical latitudes, and decrease toward higher latitudes. To examine these trends in the pantropical mangrove forest vegetation type, we collated and analysed data on above-ground biomass and annual litterfall for these communities. Regressions of biomass and litterfall data show significant relationships with height of the vegetation and latitude. It is suggested that height and latitude are causally related to biomass, while the relationship with litterfall reflects the specific growing conditions at the respective study sites. Comparison of mangrove and upland forest litterfall data shows similar trends with latitude but indicates that mangrove litterfall is higher than upland forest litterfall. The regression equations allow the litterfall/biomass ratio to be simulated, and this suggests that the patterns of organic matter partitioning differ according to latitude.     

Liberation of fermentable sugars from soybean hull biomass using ionic liquid 1‐butyl‐3‐methylimidazolium acetate and their bioconversion to ethanol

Optimized hydrolysis of lignocellulosic waste biomass is essential to achieve the liberation of sugars to be used in fermentation process. Ionic liquids (ILs), a new class of solvents, have been tested in the pretreatment of cellulosic materials to improve the subsequent enzymatic hydrolysis of the biomass. Optimized application of ILs on biomass is important to advance the use of this technology. In this research, we investigated the effects of using 1‐butyl‐3‐methylimidazolium acetate ([bmim][Ac]) on the decomposition of soybean hull, an abundant cellulosic industrial waste. Reaction aspects of temperature, incubation time, IL concentration, and solid load were optimized before carrying out the enzymatic hydrolysis of this residue to liberate fermentable glucose. Optimal conditions were found to be 75°C, 165 min incubation time, 57% (mass fraction) of [bmim][Ac], and 12.5% solid loading. Pretreated soybean hull lost its crystallinity, which eased enzymatic hydrolysis, confirmed by Fourier Transform Infrared analysis. The enzymatic hydrolysis of the biomass using an enzyme complex from Penicillium echinulatum liberated 92% of glucose from the cellulose matrix. The hydrolysate was free of any toxic compounds, such as hydroxymethylfurfural and furfural. The obtained hydrolysate was tested for fermentation using Candida shehatae HM 52.2, which was able to convert glucose to ethanol at yields of 0.31. These results suggest the possible use of ILs for the pretreatment of some lignocellulosic waste materials, avoiding the formation of toxic compounds, to be used in second‐generation ethanol production and other fermentation processes. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:312–320, 2016     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

Effects of interaction with sulphur compounds and free volume in imidazolium-based ionic liquid on desulphurisation: a molecular dynamics study

Interaction energy with sulphur compounds and free volume in imidazolium-based ionic liquid were calculated by molecular dynamics (MD) simulations to examine their effects on desulphurisation. From microstructure analysis and energy contribution calculation, it is found that an increasing fractional free volume in ionic liquid and an enhancement of interaction with solute by tuning the structure of ionic liquid or oxidising sulphur compounds are favourable for desulphurisation, which allows more efficient packing of sulphur compounds in ionic liquids and more easily extraction of sulphur compounds from fuel. The MD results are in good agreement with experimental desulphurisation performance.     

Chromium halides mediated production of hydroxymethylfurfural from starch-rich acorn biomass in an acidic ionic liquid

Chromium halides were introduced for the sustainable production of hydroxymethylfurfural (HMF) from raw acorn biomass using an acidic ionic liquid. The free sugars (glucose and maltose) released by the acidic hydrolysis of the biomass were confirmed by the FT-IR absorption bands around 995–1014 cm⁻¹ and HPLC. FESEM analysis showed that the acorn biomass contains various sizes of starch granules and their structures were severely changed by the acidic hydrolysis. An optimal concentration of HCl for the HMF yields was 0.3 M. The highest HMF yield (58.7 + 1.3 dwt %) was achieved in the reaction mixture of 40% [OMIM]Cl + 10% ethyl acetate + 50% 0.3 M HCl extract containing a mix of CrBr₃/CrF₃. The combined addition of two halide catalysts was more effective in the synthesis of HMF (1.2-fold higher on average) than their single addition. The best productivity of HMF was found at 15% concentration of the biomass and at 50%, its relative productivity declined down to ca. 0.4-fold.     

Enzymatic resolution of (R, S)-Naproxen in water-saturated ionic liquid

A water-saturated ionic liquid has been exploited for resolution of (R, S)-Naproxen by lipase-catalyzed hydrolysis to enhance the conversion and facilitate product recovery. From the enantioselectivity and activity of lipase, water-saturated [bmim]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) was selected as the best reaction medium. To prevent the dissolution of lipase in the ionic liquid, a weakly polar, amorphous multiporous silica YWG-C₆H₅ was used as a support for immobilization. The production of (S)-Naproxen was initially performed in a batch reactor containing 20 mL of substrate solution. After 72 h reaction, 98.2% enantiomeric excess of the (S)-Naproxen was obtained with 28.3% hydrolysis conversion. The unconventional solvent properties of ionic liquids have been exploited in reaction medium recycling, product recovery and water recruiting schemes. In a repetitive batch reaction system, the immobilized lipase could be repeatedly used for 5 times with only a slight reduction in reaction conversion.     

Conversion of hexose into 5-hydroxymethylfurfural in imidazolium ionic liquids with and without a catalyst

Conversion of fructose and glucose into 5-hydroxymethylfurfural (HMF) was investigated in various imidazolium ionic liquids, including 1-butyl-3-methylimidazolium chloride (BmimCl), 1-hexyl-3-methylimidazolium chloride (HmimCl), 1-octyl-3-methylimidazolium chloride (OmimCl), 1-benzyl-3-methylimidazolium chloride (BemimCl), 1-Butyl-2,3-dimethylimidazolium chloride (BdmimCl), and 1-butyl-3-methylimidazolium p-toluenesulfonate (BmimPS). The acidic C-2 hydrogen of imidazolium cations was shown to play a major role in the dehydration of fructose in the absence of a catalyst, such as sulfuric acid or CrCl₃. Both the alkyl groups of imidazolium cations and the type of anions affected the reactivity of the carbohydrates. Although, except BmimCl and BemimCl, other four ionic liquids could only achieve not more than 25% HMF yields without an additional catalyst, 60–80% HMF yields were achieved in HmimCl, BdmimCl, and BmimPS in the presence of sulfuric acid or CrCl₃ in sufficient quantities.     

Corecovery of lipids and fermentable sugars from Rhodosporidium toruloides using ionic liquid cosolvents: Application of recycle to batch fermentation

This work evaluates the ability of an ionic liquid‐methanol cosolvent system to extract lipids and recycle fermentable sugars recovered from oil‐bearing Rhodosporidium toruloides grown in batch culture on defined media using glucose and xylose as carbon sources. Growth on the recycled mixed carbon substrate was successful with glucose consumed before xylose and overall cell mass to lipid yields (Y_P/X) between 57% and 61% (w/w relative to whole dried cell mass) achieved. Enzymatic hydrolysis of the delipified carbohydrate fraction recovered approximately 9%–11% (w/w) of the whole dried cell mass as fermentable sugars, which were successfully recycled as carbon sources without further purification. In total, up to 70% (w/w) of the whole dried cell mass was recovered as lipids and fermentable sugars and the substrate to lipid yields (Y_P/S) was increased from 0.12 to 0.16 g lipid/g carbohydrate consumed, highlighting the promise of this approach to process lipid bearing cell biomass. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1239–1242, 2014     

Peroxidase biocatalysis in water-soluble ionic liquids: activity,kinetic and thermal stability

Abstract

The activity and stability of commercial peroxidase was investigated in the presence of five 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) with either bromide or chloride anions: [C_xmim][X]. The peroxidase activity and stability were better for the shorter alkyl chain lengths of the ILs and peroxidase was more stable in the presence of the bromide anion, rather than chloride. The thermal inactivation profile was studied from 45 to 60 °C in [C₄mim][Cl] and [C₄mim][Br]. The activation energy was also determined. Kinetic analysis of the enzyme in the presence of the [C₄mim][Br] or control (buffer solution) showed that the KM value increased 5-fold and Vm decreased 13-fold in the presence of the IL. The increase in KM indicates that this IL can reduce the binding affinity between substrate and enzyme.     

Kinetic resolution of rac-2-pentanol catalyzed by Candida antarctica lipase B in the ionic liquid, 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide

The ionic liquid, l-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide ([Bmim] [NTf2]), was used as a reaction medium for the kinetic resolution of rac-2-pentanol catalyzed by free Candida antarctica lipase B, using vinyl propionate at 2% (v/v) water content. The synthetic activity of lipase in [Bmim] [NTf2] was up 2.5-times greater than in hexane, and showed high enantioselectivity (ee > 99.99%). The optimal temperature and pH were 60 degrees C and 7, respectively. A decrease in water activity (aw) produced a decay in synthetic activity, and an exponential increase in selectivity.     

Application of metagenomic techniques in mining enzymes from microbial communities for biofuel synthesis

Feedstock for biofuel synthesis is transitioning to lignocelluosic biomass to address criticism over competition between first generation biofuels and food production. As microbial catalysis is increasingly applied for the conversion of biomass to biofuels, increased import has been placed on the development of novel enzymes. With revolutionary advances in sequencer technology and metagenomic sequencing, mining enzymes from microbial communities for biofuel synthesis is becoming more and more practical. The present article highlights the latest research progress on the special characteristics of metagenomic sequencing, which has been a powerful tool for new enzyme discovery and gene functional analysis in the biomass energy field. Critical enzymes recently developed for the pretreatment and conversion of lignocellulosic materials are evaluated with respect to their activity and stability, with additional explorations into xylanase, laccase, amylase, chitinase, and lipolytic biocatalysts for other biomass feedstocks.