蒸汽爆破玉米秸秆酶解动力学

为了掌握蒸汽爆破玉米秸秆的酶解特性,研究了不同底物浓度、酶浓度、温度对反应速率的影响。运用米氏方程对酶解动力学过程进行拟合,结果表明,纤维素酶对该玉米秸秆的水解反应在反应前3 h符合一级反应,可用米氏方程对其进行拟合。在转速为120 r/min、酶浓度为1.2 FPU/mL、pH 5.0、温度为45 ℃时米氏常数Km为11.71 g/L,最大反应速率Vm为1.5 g/(L·h)。确立了包括底物浓度、酶浓度、温度在内的酶解动力学模型,该模型适合温度为30 ℃~50 ℃。     

Enhancement of the enzymatic digestibility of sugarcane bagasse by steam pretreatment impregnated with hydrogen peroxide

Sugarcane bagasse was subjected to steam pretreatment impregnated with hydrogen peroxide. Analyses were performed using 2³ factorial designs and enzymatic hydrolysis was performed at two different solid concentrations and with washed and unwashed material to evaluate the importance of this step for obtaining high cellulose conversion. Similar cellulose conversion were obtained at different conditions of pretreatment and hydrolysis. When the cellulose was hydrolyzed using the pretreated material in the most severe conditions of the experimental design (210°C, 15 min and 1.0% hydrogen peroxide), and using 2% (w/w) water‐insoluble solids (WIS), and 15 FPU/g WIS, the cellulose conversion was 86.9%. In contrast, at a milder pretreatment condition (190°C, 15 min and 0.2% hydrogen peroxide) and industrially more realistic conditions of hydrolysis (10% WIS and 10 FPU/g WIS), the cellulose conversion reached 82.2%. The step of washing the pretreated material was very important to obtain high concentrations of fermentable sugars. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Pretreatment of corn stover and hybrid poplar by sodium hydroxide and hydrogen peroxide

Sodium hydroxide and its derivatives are used as pulping reagents, wherein the spent NaOH is recovered in salt form and reused. In this study, use of low concentration NaOH (1–5%) in pretreatment of corn stover and hybrid poplar was investigated. It was done with the understanding that NaOH can be recovered. One of the main objectives in this study is to explore the potential of H₂O₂ with NaOH for pretreatment of high lignin substrate such as hybrid poplar. Pretreatment time has not been optimized in this study but held constant at 24 h. Corn stover, after treatment with NaOH under moderate conditions, attains near quantitative glucan digestibility. On the other hand, hybrid poplar requires treatment at higher temperature and NaOH concentration to attain acceptable level of digestibility. Supplementation of hydrogen peroxide in the pretreatment significantly raises delignification and digestibility of hybrid poplar. It was also helpful in retaining the carbohydrates in the treated solids. Retention of hemicellulose after pretreatment provides a significant economic benefit as it eliminates the need for detoxifying hemicellulose sugars. As the residual xylan remaining after pretreatment is an impediment to enzymatic digestion of glucan, supplementation of xylanase has significantly increased the digestibility of glucan as well as xylan of the treated hybrid poplar. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Catalysis with CuII(bpy) improves alkaline hydrogen peroxide pretreatment

Copper(II) 2,2′‐bipyridine (Cu^II(bpy))‐catalyzed alkaline hydrogen peroxide (AHP) pretreatment was performed on three biomass feedstocks including alkali pre‐extracted switchgrass, silver birch, and a hybrid poplar cultivar. This catalytic approach was found to improve the subsequent enzymatic hydrolysis of plant cell wall polysaccharides to monosaccharides for all biomass types at alkaline pH relative to uncatalyzed pretreatment. The hybrid poplar exhibited the most significant improvement in enzymatic hydrolysis with monomeric sugar release and conversions more than doubling from 30% to 61% glucan conversion, while lignin solubilization was increased from 36.6% to 50.2% and hemicellulose solubilization was increased from 14.9% to 32.7%. It was found that Cu^II(bpy)‐catalyzed AHP pretreatment of cellulose resulted in significantly more depolymerization than uncatalyzed AHP pretreatment (78.4% vs. 49.4% decrease in estimated degree of polymerization) and that carboxyl content the cellulose was significantly increased as well (fivefold increase vs. twofold increase). Together, these results indicate that Cu^II(bpy)‐catalyzed AHP pretreatment represents a promising route to biomass deconstruction for bioenergy applications. Biotechnol. Bioeng. 2013; 110: 1078–1086. © 2012 Wiley Periodicals, Inc.     

Mild alkaline/oxidative pretreatment of wheat straw

A new mild alkaline/oxidative pretreatment of wheat straw prior to enzymic hydrolysis was carried out. It consists of a first alkaline (1% NaOH for 24 h) step, which mainly solubilises hemicellullose and renders the material more accessible to further chemical attack, and a second alkaline/oxidative step (1% NaOH and 0·3% H₂O₂ for 24 h), which solubilises and oxidises lignin to minor polluting compounds. The entire process was carried out at low temperature (25–40°C) using a low concentration of chemicals, resulting in a relatively low cost and waste liquors containing only trace amounts of dangerous pollutants derived from lignin. Recovery of cellulose after the double pretreatment reached 90% of that contained in the starting material, with a concomitant 81% degradation of lignin. The action of a commercial cellulase on the cellulose obtained produced a syrup with a high concentration of reducing sugars (220 mg/ml), of which a large percentage was glucose.     

过氧化氢预处理对褐煤物化性质及生物产气的影响

【目的】研究过氧化氢预处理对褐煤物化性质及生物产气的影响。【方法】以胜利5号褐煤为研究对象,利用正交试验对过氧化氢预处理褐煤条件进行优化,在最优条件下处理褐煤得到处理后的残煤和处理液,通过X射线衍射分析(X-ray diffraction, XRD)、扫描电镜分析(scanning electron microscopy, SEM)、比表面积分析及孔隙分析(brunauer-emmett-teller, BET)、气相色谱-质谱分析(GC-MS)、高效液相色谱分析(HPLC)等方法对原煤、残煤和处理液的物化性质进行比较分析。【结果】经过氧化氢预处理,褐煤的最优条件为过氧化氢浓度5.0%、预处理时间20 d、液固比30:1,处理液中总有机碳含量为105 mg/L。在最优条件下,过氧化氢处理后残煤表面裂痕、凹陷增多,表面结构变得松散;煤的芳香面网间距增加,芳环结构更加疏松,晶核结构变小;孔隙度和比表面积均增大。处理后残煤中的固定碳、C元素和镜质组的相对含量降低,而灰分、挥发分、O和H元素及惰质组含量增加,残煤中O=C-O、C=C、C=O官能团含量增加,而N-H、C-H官能团含量则减少。生物产气结果表明反应液和残煤产气量均低于原煤,分别减少了39.13%和94.46%。过氧化氢预处理主要作用于煤中镜质组,使其有机碳溶解,煤中大分子结构的官能团发生变化,改变煤的芳环结构,在氧化作用下煤结构中的小分子溶解进入处理液。处理液中有机物以短链脂肪酸为主。经生物产气后,反应液中小分子酸以及有机物种类减少,被微生物利用产气。而各产气试验组中优势菌门及优势菌属的菌群丰度呈现出显著差异,古菌中原煤产气组盐杆菌门(Halobacteriota)为优势菌门,甲烷八叠球菌属(Methanosarcina)为优势菌属;反应液产气组热变形菌(Thermoprotei)为优势菌门,深古菌属(Bathyarchaeia)为优势菌属;细菌中原煤产气组放线菌门(Actinomycetota)为优势菌门,Gaiellales为优势菌属;反应液产气试验组假单胞菌门(Pseudomonadota)为优势菌门,代尔夫特菌属(Delftia)为优势菌属。【结论】煤溶解有机碳可以被微生物利用产气,但是煤中有机组分的过氧化脱除导致生物产气量减少。     

Particle concentration and yield stress of biomass slurries during enzymatic hydrolysis at high‐solids loadings

Effective and efficient breakdown of lignocellulosic biomass remains a primary barrier for its use as a feedstock for renewable transportation fuels. A more detailed understanding of the material properties of biomass slurries during conversion is needed to design cost‐effective conversion processes. A series of enzymatic saccharification experiments were performed with dilute acid pretreated corn stover at initial insoluble solids loadings of 20% by mass, during which the concentration of particulate solids and the rheological property yield stress (τ_y) of the slurries were measured. The saccharified stover liquefies to the point of being pourable (τ_y ≤ 10 Pa) at a total biomass conversion of about 40%, after roughly 2 days of saccharification for a moderate loading of enzyme. Mass balance and semi‐empirical relationships are developed to connect the progress of enzymatic hydrolysis with particle concentration and yield stress. The experimental data show good agreement with the proposed relationships. The predictive models developed here are based on established physical principles and should be applicable to the saccharification of other biomass systems. The concepts presented, especially the ability to predict yield stress from extent of conversion, will be helpful in the design and optimization of enzymatic hydrolysis processes that operate at high‐solids loadings. Biotechnol. Bioeng. 2009; 104: 290–300 © 2009 Wiley Periodicals, Inc.     

Superoxide and hydrogen peroxide formation during enzymatic oxidation of DOPA by phenoloxidase

Generation of superoxide anion and hydrogen peroxide during enzymatic oxidation of 3-(3,4-dihydroxyphenyl)-dl-alanine (DOPA) has been studied. The ability of DOPA to react with has been revealed. EPR spectrum of DOPA-semiquinone formed upon oxidation of DOPA by was observed using spin stabilization technique of ortho-semiquinones by Zn²⁺ ions. Simultaneously, the oxidation of DOPA by was found to produce hydrogen peroxide (H₂O₂). The analysis of H₂O₂ formation upon oxidation of DOPA by using 1-hydroxy-3-carboxy-pyrrolidine (CP-H), and SOD as competitive reagents for superoxide provides consistent values of the rate constant for the reaction between DOPA and being equal to (3.4±0.6)×10⁵?M^?1?s^?1.

The formation of H₂O₂ during enzymatic oxidation of DOPA by phenoloxidase (PO) has been shown. The H₂O₂ production was found to be SOD-sensitive. The inhibition of H₂O₂ production by SOD was about 25% indicating that H₂O₂ is produced both from superoxide anion and via two-electron reduction of oxygen at the enzyme. The attempts to detect superoxide production during enzymatic oxidation of DOPA using a number of spin traps failed apparently due to high value of the rate constant for DOPA interaction with      

Acid-catalyzed steam pretreatment of lodgepole pine and subsequent enzymatic hydrolysis and fermentation to ethanol

Utilization of ethanol produced from biomass has the potential to offset the use of gasoline and reduce CO(2) emissions. This could reduce the effects of global warming, one of which is the current outbreak of epidemic proportions of the mountain pine beetle (MPB) in British Columbia (BC), Canada. The result of this is increasing volumes of dead lodgepole pine with increasingly limited commercial uses. Bioconversion of lodgepole pine to ethanol using SO(2)-catalyzed steam explosion was investigated. The optimum pretreatment condition for this feedstock was determined to be 200 degrees C, 5 min, and 4% SO(2) (w/w). Simultaneous saccharification and fermentation (SSF) of this material provided an overall ethanol yield of 77% of the theoretical yield from raw material based on starting glucan, mannan, and galactan, which corresponds to 244 g ethanol/kg raw material within 30 h. Three conditions representing low (L), medium (M), and high (H) severity were also applied to healthy lodgepole pine. Although the M severity conditions of 200 degrees C, 5 min, and 4% SO(2) were sufficiently robust to pretreat healthy wood, the substrate produced from beetle-killed (BK) wood provided consistently higher ethanol yields after SSF than the other substrates tested. BK lodgepole pine appears to be an excellent candidate for efficient and productive bioconversion to ethanol.     

Quantification of morphochemical changes during in situ enzymatic hydrolysis of individual biomass particles based on autofluorescence imaging

Enzymatic hydrolysis of biomass is an established method for producing biofuels. Lignocellulosic biomass such as corn stover is very inhomogeneous material with big variation on conversion rates between individual particles therefore leading to variable recalcitrance results. In this study, we used noninvasive optical microscopy techniques, such as two-photon microscopy and fluorescence lifetime imaging microscopy, to visualize and analyze morphological and chemical changes of individual corn stover particles pretreated with sulfuric acid during hydrolysis. Morphochemical changes were interpreted based on the fluorescence properties of isolated building blocks of plant cell wall, such as cellulose, hemicellulose, and lignin. Enzymatic hydrolysis resulted in particle size reduction, side wall collapse, decrease of second harmonic signal from cellulose, redshifting of autofluorescence emission, and lifetime decrease attributed to the relative increase of lignin. Based on these observations, tracking compositional change after hydrolysis of individual particles was accomplished. The methodologies developed offer a paradigm for imaging and analyzing enzymatic hydrolysis in vitro and in situ, which could be used for screening enzymes cocktails targeting specific recalcitrant structures or investigating locally enzyme anti-inhibitory agents.     

Effect of hydrogen peroxide pretreatment on the structural features and the enzymatic hydrolysis of rice straw

Assessment was made to evaluate the effect of hydrogen peroxide pretreatment on the change of the structural features and the enzymatic hydrolysis of rice straw. Changes in the lignin content, weight loss, accessibility for Cadoxen, water holding capacity, and crystallinity of straw were measured during pretreatment to express the modification of the lignocellulosic structure of straw. The rates and the extents of enzymatic hydrolysis, cellulase adsorption, and cellobiose accumulation in the initial stage of hydrolysis were determined to study the pretreatment effect on hydrolysis. Pretreatment at 60 degrees C for 5 h in a solution with 1% (w/w) H(2)O(2) and NaOH resulted in 60% delignification, 40% weight loss, a fivefold increase in the accessibility for Cadoxen, an one times increase in the water-holding capacity, and only a slight decrease in crystallinity as compared with that of the untreated straw. Improvement on the pretreatment effect could be made by increasing the initial alkalinity and the pretreatment temperature of hydrogen peroxide solution. A saturated improvement on the structural features was found when the weight ratio of hydrogen peroxide to straw was above 0.25 g H(2)O(2)/g straw in an alkaline H(2)O(2) solution with 1% (w/w) NaOH at 32 degrees C. The initial rates and extents of hydrolysis, cellulase adsorption, and cellobiose accumulation in hydrolysis were enhanced in accordance with the improved structural features of straw pretreated. A four times increase in the extent of the enzymatic hydrolysis of straw for 24 h was attributed to the alkaline hydrogen peroxide pretreatment.     

Organosolv pretreatment of lignocellulosic biomass for enzymatic hydrolysis

Production of ethanol by bioconversion of lignocellulosic biomass has attracted much interest in recent years. However, the pretreatment process for increasing the enzymatic digestibility of cellulose has become a key step in commercialized production of cellulosic ethanol. During the last decades, many pretreatment processes have been developed for decreasing the biomass recalcitrance, but only a few of them seem to be promising. From the point of view for integrated utilization of lignocellulosic biomass, organosolv pretreatment provides a pathway for biorefining of biomass. This review presents the progress of organosolv pretreatment of lignocellulosic biomass in recent decades, especially on alcohol, organic acid, organic peracid and acetone pretreatments, and corresponding action mechanisms. Evaluation and prospect of organosolv pretreatment were performed. Finally, some recommendations for future investigation of this pretreatment method were given.     

Microscopic examination of changes of plant cell structure in corn stover due to hot water pretreatment and enzymatic hydrolysis

Particle size associated with accessible surface area has a significant impact on the saccharification of plant cell walls by cellulolytic enzymes. Small particle sizes of untreated cellulosic substrate are more readily hydrolyzed than large ones because of higher specific surface area. Pretreatment enlarges accessible and susceptible surface area leading to enhanced cellulose hydrolysis. These hypotheses were tested using ground corn stover in the size ranges of 425-710 and 53-75 microm. Ultrastructural changes in these particles were imaged after treatment with cellulolytic enzymes before and after liquid hot water pretreatment. The smaller 53-75 microm corn stover particles are 1.5x more susceptible to hydrolysis than 425-710 microm corn stover particles. This difference between the two particle size ranges is eliminated when the stover is pretreated with liquid hot water pretreatment at 190 degrees C for 15 min, at pH between 4.3 and 6.2. This pretreatment causes ultrastructural changes and formation of micron-sized pores that make the cellulose more accessible to hydrolytic enzymes.     

Scale-up of flat-plate reactors for enzymatic hydrolysis of fats and oils

To determine the feasibility of continuous enzymatic fat-splitting, immobilized lipase reactors were constructed from alternating layers of enzyme support material and separator screens. Partially purified lipase from Thermomyces lanuginosus was loaded onto the support material at pH 5.5 by irreversible adsorption. Melted edible tallow at 51°C was pumped through the immobilized enzyme layers and swept from the downstream separator screens by buffer recycled from a continuous oil/water separator. Results from continuous operation of 10-layer reactors were compared with data from single-layer reactors. The activity per square centimeter of 10-layer reactors was nearly as much as that of single-layer reactors at the same enzyme loading and oil feed rate. Data were fitted to an empirical mathematical model.     

复合菌与复合酶联合处理对大豆皮营养成分及品质的影响

[背景]大豆皮纤维含量较高,而且含有多种抗营养因子如脲酶和抗原蛋白等,限制了大豆皮的利用.[目的]通过菌酶联合处理以进一步降低大豆皮中的纤维和抗营养因子含量,利用此方法在实验室进行大豆皮的袋装处理,评价大豆皮的营养价值及品质,为大豆皮的产业化利用奠定基础.[方法]实验分为4组,对照组(未经菌株发酵和酶解处理的大豆皮)、...     

Fast and efficient alkaline peroxide treatment to enhance the enzymatic digestibility of steam-exploded softwood substrates.

The enzymatic digestibility of steam-exploded Douglas-fir wood chips (steam exploded at 195 degrees C, 4.5 min, and 4.5% (w/w) SO(2)) was significantly improved using an optimized alkaline peroxide treatment. Best hydrolysis yields were attained when the steam-exploded material was post-treated with 1% hydrogen peroxide at pH 11.5 and 80 degrees C for 45 min. This alkaline peroxide treatment was applied directly to the water-washed, steam-exploded material eliminating the need for independent alkali treatment with 0.4% NaOH, which has been traditionally used to post-treat wood samples to try to remove residual lignin. Approximately 90% of the lignin in the original wood was solubilized by this novel procedure, leaving a cellulose-rich residue that was completely hydrolyzed within 48 h, using an enzyme loading of 10 FPU/g cellulose. About 82% of the originally available polysaccharide components of the wood could be recovered. The 18% of the carbohydrate that was not recovered was lost primarily to sugar degradation during steam explosion.     

中和剂对稀酸蒸爆玉米秸秆酶解效果的影响

以稀酸蒸爆的玉米秸秆为研究对象,考察直接水洗、Ca(OH)2、NaOH、氨水中和物料至pH 5,在固液比1∶10、酶添加量为每克纤维素14 U(滤纸酶活)的酶解条件下对纤维素转化率的影响。结果表明:水洗、Ca(OH)2、NaOH、氨水中和物料酶解72 h后,纤维素转化率分别为91.7%、80.7%、83.1%及81.7%。同时对影响纤维素酶解效率的各种因素进行了探讨。从综合成本及后续发酵过程考虑,用氨水中和稀酸蒸爆物料更适合于工业化生产。     

Dilute acid pretreatment, enzymatic saccharification and fermentation of wheat straw to ethanol

Wheat straw consists of 48.57 ± 0.30% cellulose and 27.70 ± 0.12% hemicellulose on dry solid (DS) basis and has the potential to serve as a low cost feedstock for production of ethanol. Dilute acid pretreatment at varied temperature and enzymatic saccharification were evaluated for conversion of wheat straw cellulose and hemicellulose to monomeric sugars. The maximum yield of monomeric sugars from wheat straw (7.83%, w/v, DS) by dilute H₂SO₄ (0.75%, v/v) pretreatment and enzymatic saccharification (45 °C, pH 5.0, 72 h) using cellulase, β-glucosidase, xylanase and esterase was 565 ± 10 mg/g. Under this condition, no measurable quantities of furfural and hydroxymethyl furfural were produced. The yield of ethanol (per litre) from acid pretreated enzyme saccharified wheat straw (78.3 g) hydrolyzate by recombinant Escherichia coli strain FBR5 was 19 ± 1 g with a yield of 0.24 g/g DS. Detoxification of the acid and enzyme treated wheat straw hydrolyzate by overliming reduced the fermentation time from 118 to 39 h in the case of separate hydrolysis and fermentation (35 °C, pH 6.5), and increased the ethanol yield from 13 ± 2 to 17 ± 0 g/l and decreased the fermentation time from 136 to 112 h in the case of simultaneous saccharification and fermentation (35 °C, pH 6.0).     

High-throughput microplate technique for enzymatic hydrolysis of lignocellulosic biomass

Several factors will influence the viability of a biochemical platform for manufacturing lignocellulosic based fuels and chemicals, for example, genetically engineering energy crops, reducing pre-treatment severity, and minimizing enzyme loading. Past research on biomass conversion has focused largely on acid based pre-treatment technologies that fractionate lignin and hemicellulose from cellulose. However, for alkaline based (e.g., AFEX) and other lower severity pre-treatments it becomes critical to co-hydrolyze cellulose and hemicellulose using an optimized enzyme cocktail. Lignocellulosics are appropriate substrates to assess hydrolytic activity of enzyme mixtures compared to conventional unrealistic substrates (e.g., filter paper, chromogenic, and fluorigenic compounds) for studying synergistic hydrolysis. However, there are few, if any, high-throughput lignocellulosic digestibility analytical platforms for optimizing biomass conversion. The 96-well Biomass Conversion Research Lab (BCRL) microplate method is a high-throughput assay to study digestibility of lignocellulosic biomass as a function of biomass composition, pre-treatment severity, and enzyme composition. The most suitable method for delivering milled biomass to the microplate was through multi-pipetting slurry suspensions. A rapid bio-enzymatic, spectrophotometric assay was used to determine fermentable sugars. The entire procedure was automated using a robotic pipetting workstation. Several parameters that affect hydrolysis in the microplate were studied and optimized (i.e., particle size reduction, slurry solids concentration, glucan loading, mass transfer issues, and time period for hydrolysis). The microplate method was optimized for crystalline cellulose (Avicel) and ammonia fiber expansion (AFEX) pre-treated corn stover.     

A rapid microassay to evaluate enzymatic hydrolysis of lignocellulosic substrates

Current attempts to produce ethanol from lignocellulosic biomass are focused on the optimization of pretreatment to reduce substrate recalcitrance and the improvement of enzymes for hydrolysis of the cellulose and hemicellulose components to produce fermentable sugars. Research aimed at optimizing both aspects of the bioconversion process involves assessment of the effects of multiple variables on enzyme efficiency, resulting in large factorial experiments with intensive assay requirements. A rapid assay for lignocellulose hydrolysis has been developed to address this need. Pretreated lignocellulose is formed into handsheets, which are then used to prepare small disks that are easily dispensed into microtiter plates. The hydrolysis of cellulose to glucose is estimated using an enzyme-coupled spectrophotometric assay. Using disks prepared from ethanol organosolv pretreated yellow poplar, it is shown that the assay generates data comparable with those produced by hydrolysis of pretreated yellow poplar pulp in Erlenmeyer flasks, followed by HPLC analysis of glucose. The assay shows considerable time and cost benefits over the standard assay protocol and is applicable to a broad range of lignocellulosic substrates.