Synthesis and characterization of novel chiral ionic liquids and investigation of their enantiomeric recognition properties

We report the synthesis and characterization of amino acid ester based chiral ionic liquids, derived from L- and D-alanine tert butyl ester chloride. The synthesis was accomplished via an anion metathesis reaction between commercially available L- and D-alanine tert butyl ester chloride using a variety of counterions such as lithium bis (trifluoromethane) sulfonimide, silver nitrate, silver lactate, and silver tetrafluoroborate. Both enantiomeric forms were obtained as confirmed by bands of opposite sign in the circular dichroism spectra. The L- and D-alanine tert butyl ester bis (trifluoromethane) sulfonimide were obtained as liquids at room temperature and intriguingly exhibited the highest thermal stability (up to 263 degrees C). In addition, the ionic liquids demonstrated enantiomeric recognition ability as evidenced by splitting of racemic Mosher's sodium salt signal using a liquid state (19)F nuclear magnetic resonance (NMR) and fluorescence spectroscopy. The L- and D-alanine tert butyl ester chloride resulted in solid salts with nitrate, lactate, and tetrafluoroborate anions. This illustrates the previously observed tunability of ionic liquid synthesis, resulting in ionic liquids of varying properties as a function of varying the anion.     

Ionic liquids as solvents for biopolymers: Acylation of starch and zein protein

Biopolymers such as starch and zein protein were found to be soluble at 80 °C in ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-butyl-3-methylimidazolium dicyanamide (BMIMdca) in concentrations up to 10% (w/w). Higher concentrations of biopolymers in these novel solvents resulted in solutions with too high viscosity to stir. Solutions of both starch and zein in BMIMCl were acylated with anhydrides in presence of pyridine to give acetyl starch and benzoyl zein with various degrees of substitution. Without pyridine the acylation reaction did not proceed. ¹H NMR and IR spectroscopies were used to determine the degree of substitution of starch. Viscosity studies indicated that the starch underwent slight reduction in molecular weight during the course of acylation. Starch was also soluble in other non-conventional solvents such as choline chloride/oxalic acid and choline chloride/ZnCl₂. However, zein was insoluble in these solvents.     

Homogeneous butyrylation and lauroylation of poplar wood in the ionic liquid 1-butyl-3-methylimidazolium chloride

Wood meal was dissolved under identical conditions in the ionic liquid 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) and homogeneously esterified with butyryl chloride and lauroyl chloride in the presence of triethylamine as a neutralizer. The effect of the molar ratio of reagent to the hydroxyl groups in wood on the properties of the esterified wood and the possible mechanism of the homogeneous esterification of wood in this reaction medium were studied. Furthermore, the physicochemical properties of the esterified wood were characterized by FTIR, solid-state CP/MAS ¹³C NMR, TGA/DTG and SEM. The results confirmed that the homogeneous modifications were successfully processed and highly substituted wood esters could be obtained by reacting the dissolved wood in this homogeneous system.     

High-throughput screening for ionic liquids dissolving (ligno-)cellulose

The recalcitrance of lignocellulosic biomass poses a major challenge for its sustainable and cost-effective utilization. Therefore, an efficient pretreatment is decisive for processes based on lignocellulose. A green and energy-efficient pretreatment could be the dissolution of lignocellulose in ionic liquids. Several ionic liquids were identified earlier which are capable to dissolve (ligno-)cellulose. However, due to their multitude and high costs, a high-throughput screening on small scale is essential for the determination of the most efficient ionic liquid. In this contribution two high-throughput systems are presented based on extinction or scattered light measurements. Quasi-continuous dissolution profiles allow a direct comparison of up to 96 ionic liquids per experiment in terms of their dissolution kinetics. The screening results indicate that among the ionic liquids tested EMIM Ac is the most efficient for dissolving cellulose. Moreover, it was observed that AMIM Cl is the most effective ionic liquid for dissolving wood chips.     

New 6-butylamino-6-deoxycellulose and 6-deoxy-6-pyridiniumcellulose derivatives with highest regioselectivity and completeness of reaction

This paper investigates the nucleophilic substitution (S(N)) reactions of tosylcellulose with butylamine and pyridine, respectively. The S(N) reactions of tosylcellulose 1 (DS(Total) 2.02; DS(C-6) 1.0) with butylamine carried out at 25, 50, 75 and 100 degrees C in both dimethyl sulfoxide (DMSO) and pure butylamine showed that the regioselectivity of substitution at C-6 of cellulose is temperature dependent: the highest regioselectivity at C-6 can be reached at 25 and 50 degrees C; substitution at C-2 also occurred at 75 and 100 degrees C. The substitution speed in pure butylamine is greater than that in the presence of DMSO. A complete and regioselective substitution at C-6 with a DS of 1.0 was obtained under the conditions of 50 degrees C, 40 h in butylamine. The substitution reactions of 1 with pyridine carried out at 25, 50, 75 and 100 degrees C for 24h in DMSO did not occur. In contrast to this the S(N) reactions done in pure pyridine showed that a temperature- and steric-dependent, regioselective substitution took place at C-6 at temperatures from 25 to 145 degrees C. The highest regioselectivity and completeness at C-6 can be obtained at 100 degrees C for 90 h, whereas at 145 degrees C substitution also occurs at C-2. The results were proved by 1H NMR and 13C NMR spectroscopy.     

Homogeneous modification of sugarcane bagasse cellulose with succinic anhydride using a ionic liquid as reaction medium

The homogeneous chemical modification of sugarcane bagasse cellulose with succinic anhydride using 1-allyl-3-methylimidazolium chloride (AmimCl) ionic liquid as a reaction medium was studied. Parameters investigated included the molar ratio of succinic anhydride/anhydroglucose units in cellulose in a range from 2:1 to 14:1, reaction time (from 30 to 160min), and reaction temperature (between 60 and 110 degrees C). The succinylated cellulosic derivatives were prepared with a low degree of substitution (DS) ranging from 0.071 to 0.22. The results showed that the increase of reaction temperature, molar ratio of SA/AGU in cellulose, and reaction time led to an increase in DS of cellulose samples. The products were characterized by FT-IR and solid-state CP/MAS (13)C NMR spectroscopy, and thermal analysis. It was found that the crystallinity of the cellulose was completely disrupted in the ionic liquid system under the conditions given. The data also demonstrated that homogeneous modification of cellulose with succinic anhydride in AmimCl resulted in the production of cellulosic monoester. The thermal stability of the succinylated cellulose decreased upon chemical modification.     

Analysis and quantitation of free ceramide containing nonhydroxy and 2-hydroxy fatty acids, and phytosphingosine by high-performance liquid chromatography.

Reaction of ceramides containing nonhydroxy fatty acids with benzoyl chloride in pyridine at 70 degrees C for 1 hr resulted in N-benzoylation to form N,N-acyl,benzoyl derivatives; O-benzoylation also occurred. However with ceramides containing 2-hydroxy fatty acids and phytosphingosine only O-benzoylation occurred even on prolonged treatment. Only O-benzoylation occurred on reaction with benzoic an hydride. However, the benzoylation of ceramides with phytosphingosine could not be achieved with benzoic anhydride and this benzoylation was performed by reaction with benzoyl chloride at 70 degrees C for 4 hr. Because N,N-acyl,benzoyl derivatives of ceramides containing nonhydroxy fatty acids produced by treatment with benzoyl chloride overlap methyl benzoate on high-performance liquid chromatography, benzoic anhydride was preferable for benzoylation of ceramides with nonhydroxy and 2-hydroxy fatty acids. On the other hand, the reaction with benzoyl chloride at 70 degrees C for 4 hr was used for quantitation of benzoylated ceramides containing 2-hydroxy fatty acids and phytosphingosine. 3-(p-Phenylbenzoyl)estrone was used as an internal standard for both reactions and values for ceramides containing 2-hydroxy fatty acids obtained by the two reactions were in good agreement. This procedure was applied to measurement of the ceramide levels in the brain, liver, and kidney of rats during development. The levels of ceramides containing nonhydroxy and 2-hydroxy fatty acids in the brain, liver, and kidney increased to the adult levels and then remained unchanged. Ceramide with phytosphingosine was detected in the liver and kidney, where its concentration gradually increased with age, but it was not found in the brain. The composition of nonhydroxy fatty acids were also analyzed.     

New chiral imidazolium ionic liquids from isomannide

New chiral bis and mono-imidazolium ionic liquids derived from isomannide were synthesized. The structural features of the chiral organic cations impart a special arrangement of the chiral cavity. The new chiral chloride salts of isomannide derivatives are pivotal compounds for the synthesis of different organic ionic liquids. After metathesis different anions were associated to the chiral cations providing a new class of chiral ionic liquids.     

Preparation of soluble p-aminobenzoyl chitosan ester by Schiff's base and antibacterial activity of the derivatives

Schiff's base of chitosan (BCTS) was obtained by the reaction of chitosan (CTS) and benzaldehyde. Then BCTS reacted with acyl chloride which was synthesized by p-aminobenzoic acid and thionyl chloride to get N-benzoyl-O-aminobenzoyl chitosan ester (BABCTSE), removing the groups of amino protection of BABCTSE to get the final product (ABCTSE). The structures of the derivatives were characterized by FT-IR, (1)H NMR, (13)C NMR and elemental analysis. The elemental analysis results indicated that the degrees of substitution (DS) of the products were 16.8% and 40.4%. The synthesized compounds exhibited an excellent solubility in organic solvents. TG and DTG results showed that thermal stability of the derivatives was lower than that of chitosan. In addition, the existence of two different amido in the molecular structures contributed to forming more -NH(3)(+) in the acid solution which could make the derivatives have a greater advantage in the field of bacteriostasis.     

Effect of ionic liquids alkyl chain length on horseradish peroxidase thermal inactivation kinetics and activity recovery after inactivation

The effects of different alkyl chain lengths of ionic liquids 1-ethyl-, 1-butyl- and 1-hexyl-3-methylimidazolium chloride, on the catalytic activity, thermal stability and deactivation kinetics of horseradish peroxidase were studied in the temperature range of 45–85 °C. The presence of 1-ethyl- and 1-butyl-ionic liquids up to 25 % (w/v) did not affect significantly the enzyme activity at 25 °C, whereas the addition of 1-hexyl-solvent resulted in lower activity of enzyme. Typical biphasic deactivation profiles were obtained and adequately fitted by a bi-exponential equation. When increasing ionic liquids concentration up to 25 % (w/v), the second phase of deactivation became more prominent, till leading to apparent first-order kinetics. Occurrence of activity regain, following thermal deactivation was found, reaching up 60–80 % of the initial activity, especially in 1-hexyl-3-methylimidazolium chloride. Activity regain was particularly noticeable in the first phase of deactivation. Temperature sensitivity of the Soret band maxima indicated that the enzyme prepared in buffer or 1-hexyl-3-methylimidazolium chloride had similar conformational changes in the haem region, but no correlations were found with activity decrease.     

Thermal denaturation of DNA from bromodeoxyuridine substituted cells.

The thermal denaturation of DNA from cell lines extensively substituted with bromodeoxyuridine has been examined spectrophotometrically over a wide range in ionic strength and by thermal elution from hydroxyapatite columns. BrdU substitution stabliizes DNA at all ionic strengths between 7.5 mM and 1350 mM potassium ion concentration, although a plot of log ionic strength vs Tm deviates from linearity above 150 mM. This nonlinearity is most pronounced with BrdU-substituted DNAs, resulting in a lowered delta Tm between unsubstituted and substituted DNA with increasing ionic strength. DMSO is shown to decrease the Tm of both unsubstituted and BrdU-substituted DNA equally, at a rate of .5 degrees C per 1% DMSO.     

Side reactions in the H-phosphonate approach to oligonucleotide synthesis: a kinetic investigation on bisacylphosphite formation and 5'-O-acylation

A kinetic study on the reactions of pivaloyl chloride with a nucleoside H-phosphonate (bisacylphosphite formation), or a protected nucleoside with a free 5'-OH (5'-O-pivaloylation) has been carried out in the presence of differently substituted pyridines. The bisacylphosphite formation is a result of acylation of the mixed carboxylic-phosphonic acid anhydride to give the corresponding bispivaloylphosphite derivative. The rate of this reaction is dependent on the concentration of pyridine derivative and pivaloyl chloride. The 5'-O-pivaloylation reaction is also dependent on the concentration of pyridine derivative and pivaloyl chloride. The rate of both reactions is dependent on the basicity of the pyridine derivative, displaying a higher rate with more basic pyridines. The dependence of log k vs. pKa of pyridine is linear but the slopes are quite different for the two reactions (0.84 for bisacylation and 0.21 for 5'-O-pivaloylation). For both reactions considerably lower rates in the presence of sterically hindered pyridines suggest the existence of nucleophilic catalysis on pivaloyl chloride in reactions with non-hindered pyridines.     

Cytochrome c dissolved in 1-allyl-3-methylimidazolium chloride type ionic liquid undergoes a quasi-reversible redox reaction up to 140°C

Solubility of cytochrome c, a typical heme protein, in a various ionic liquids has been analyzed. The solubility has been discussed with polarity parameters of the ionic liquids. Both hydrogen bond basicity and dipolarity/polarizability of the ionic liquids were confirmed to be influential factors to control the solubilization of cytochrome c. Polar ionic liquids such as 1-butyl-3-methylimidazolium chloride and 1-allyl-3-methylimidazolium chloride solubilized cytochrome c at 80°C, and the dissolved cytochrome c was found to keep its redox activity in these ionic liquids. The redox response of the dissolved cytochrome c was detected in 1-allyl-3-methylimidazolium chloride up to 140°C.     

Toward advanced ionic liquids. Polar,enzyme-friendly solvents for biocatalysis

Ionic liquids, also called molten salts, are mixtures of cations and anions that melt below 100°C. Typical ionic liquids are dialkylimidazolium cations with weakly coordinating anions such as (MeOSO₃) or (PF₆). Advanced ionic liquids such as choline citrate have biodegradable, less expensive, and less toxic anions and cations. Deep eutectic solvents are also included in the advanced ionic liquids. Deep eutectic solvents are mixtures of salts such as choline chloride and uncharged hydrogen bond donors such as urea, oxalic acid, or glycerol. For example, a mixture of choline chloride and urea in 1:2 molar ratio liquefies to form a deep eutectic solvent. Their properties are similar to those of ionic liquids. Water-miscible ionic liquids as cosolvents with water enhance the solubility of substrates or products. Although traditional water-miscible organic solvents also enhance solubility, they often inactivate enzymes, while ionic liquids do not. The enhanced solubility of substrates can increase the rate of reaction and often increases the regioor enantioselectivity. Ionic liquids can also be solvents for non-aqueous reactions. In these cases, they are especially suited to dissolve polar substrates. Polar organic solvent alternatives inactivate enzymes, but ionic liquids do not even when they have similar polarities. Besides their solubility properties, ionic liquids and deep eutectic solvents may be greener than organic solvents because ionic liquids are nonvolatile, and can be made from nontoxic components. This review covers selected examples of enzyme catalyzed reaction in ionic liquids that demonstrate their advantages and unique properties, and point out opportunities for new applications. Most examples involve hydrolases, but oxidoreductases and even whole cell reactions have been reported in ionic liquids.     

Isolation and Characterisation of 1-Alkyl-3-Methylimidazolium Chloride Ionic Liquid-Tolerant and Biodegrading Marine Bacteria

The aim of this study was to isolate and identify marine-derived bacteria which exhibited high tolerance to, and an ability to biodegrade, 1-alkyl-3-methylimidazolium chloride ionic liquids. The salinity and hydrocarbon load of some marine environments may induce selective pressures which enhance the ability of microbes to grow in the presence of these liquid salts. The isolates obtained in this study generally showed a greater ability to grow in the presence of the selected ionic liquids compared to microorganisms described previously, with two marine-derived bacteria, Rhodococcus erythropolis and Brevibacterium sanguinis growing in concentrations exceeding 1 M 1-ethyl-3-methylimidazolium chloride. The ability of these bacteria to degrade the selected ionic liquids was assessed using High Performance Liquid Chromatography (HPLC), and three were shown to degrade the selected ionic liquids by up to 59% over a 63-day test period. These bacterial isolates represent excellent candidates for further potential applications in the bioremediation of ionic liquid-containing waste or following accidental environmental exposure.     

Michael addition of imidazole with acrylates catalyzed by alkaline protease from Bacillus subtilis in organic media

A new activity of alkaline protease from Bacillus subtilis for Michael addition reactions of imidazole, 4-nitro-1H-imidazole and 2-methyl-4-nitro-1H-imidazole with acrylates and acrylic acid was investigated. The reactions were carried out in pyridine at 50 degrees C for 72 h. Five N-substituted imidazole derivatives were obtained using acrylate esters, but not acrylic acid, in yields from 62% to 76%.     

Enhanced enzymatic hydrolysis of spruce by alkaline pretreatment at low temperature

Alkaline pretreatment of spruce at low temperature in both presence and absence of urea was studied. It was found that the enzymatic hydrolysis rate and efficiency can be significantly improved by the pretreatment. At low temperature, the pretreatment chemicals, either NaOH alone or NaOH-urea mixture solution, can slightly remove lignin, hemicelluloses, and cellulose in the lignocellulosic materials, disrupt the connections between hemicelluloses, cellulose, and lignin, and alter the structure of treated biomass to make cellulose more accessible to hydrolysis enzymes. Moreover, the wood fiber bundles could be broken down to small and loose lignocellulosic particles by the chemical treatment. Therefore, the enzymatic hydrolysis efficiency of untreated mechanical fibers can also be remarkably enhanced by NaOH or NaOH/urea solution treatment. The results indicated that, for spruce, up to 70% glucose yield could be obtained for the cold temperature pretreatment (-15 degrees C) using 7% NaOH/12% urea solution, but only 20% and 24% glucose yields were obtained at temperatures of 23 degrees C and 60 degrees C, respectively, when other conditions remained the same. The best condition for the chemical pretreatment regarding this study was 3% NaOH/12% urea, and -15 degrees C. Over 60% glucose conversion was achieved upon this condition.     

The reactivity of phosphomono-and phosphodiester groups in oligonucleotides.

The rate constants were estimated by phosphorus NMR spectroscopy for the reactions of alcohols (Tr-dT, 2-cyanoethanol) in pyridine with the main types of the reactive phosphorylating intermediates formed by treatment of pdT-Ac, pdTpdT-Ac, Tr-dTpdT-Ac, Tr-dTpdTpdT-Ac with 2, 4, 6-triisopropylbenzene-sulfonyl chloride (TPS): 1) B type derivatives with phosphomono ester (PME) group converted to a phosphoryl pyridinium residue; 2) C type derivatives with PME and phosphodiester (PDE) groups converted to trisubstituted pyrophosphate; 3) D type derivatives with PDE groups converted to tetrasubstituted pyrophosphate. The two latter types are partially present as cyclic intramolecular pyrophosphates Ci and Di. The reactivity of the intermediates decrease in the series B greater than Ci approximately Di greater than C approximately D. The Ci derivative of pdTpdT-Ac when obtained in dimethylformamide was found to be rather stable to hydrolysis and could be separated from the other dinucleotide derivatives by ion-exchange chromatography. The Arrhenius parameters of all steps of the conversion of PME group of pdT-Ac to B derivative and of the reaction of TPS with PDE group of dinucleoside phosphate Tr-dTpdT-Ac were measured.     

Enhanced enzymatic saccharification of kenaf powder after ultrasonic pretreatment in ionic liquids at room temperature

This study demonstrates for the first time that the enzymatic hydrolysis of cellulose is drastically enhanced following ultrasonic pretreatment of lignocellulosic material in ionic liquids (ILs) when compared to conventional thermal pretreatment. Five types of ILs, 1-buthyl-3-methylimidazolium chloride (BmimCl), 1-allyl-3-methylimidazolium chloride (AmimCl), 1-ethyl-3-methylimidazolium chloride (EmimCl), 1-ethyl-3-methylimidazolium diethyl phosphate (EmimDep), and 1-ethyl-3-methylimidazolium acetate (EmimOAc) were tested. Cellulose saccharification ratio was about 20% for kenaf powders pretreated in BmimCl, AmimCl, EmimCl, and EmimDep by conventional heating at 110 °C for 120 min. Conversely, 60-95% of cellulose was hydrolyzed to glucose, subsequent to ultrasonic pretreatment in the same ILs for 120 min at 25 °C. The cellulose saccharification ratio of kenaf powder in EmimOAc was 86% after only 15 min of the ultrasonic pretreatment at 25 °C, compared to only 47% in that case of thermal pretreatment in the IL.     

Swelling and dissolution of cellulose. Part IV: Free floating cotton and wood fibres in ionic liquids

The objective of this paper is to investigate if the swelling and dissolution mechanisms found for aqueous solvents are valid for non-aqueous ones. Three different ionic liquids were used and the swelling and dissolution mechanisms were investigated by optical methods. Native and enzymatically treated cellulose fibres (cotton and wood fibres) are dipped into three ionic liquids (1-N-butyl-3-methylimidazolium chloride ([C4mim]+Cl−)/DMSO, allylmethylimidazolium bromide ([Amim]+Br−) and butenylmethylimidazolium bromide ([Bmim]+Br−). ([C4mim]+Cl−)/DMSO shows a swelling of cellulose by ballooning and then dissolution. ([Amim]+Br−) and ([Bmim]+Br−) show a homogeneous swelling but no dissolution. The swelling and dissolution mechanisms of cellulose in ionic liquids are similar to those observed in aqueous solvents. It indicates that the swelling and dissolution mechanisms are entirely due to the way cellulose fibres are structured, not depending on the type of solvent. The quality of the solvent is giving the type of mechanism.