Well-defined DNA-mimic brush polymers bearing adenine moieties: synthesis, layer-by-layer self-assembly, and biocompatibility

Two new DNA-mimicking brush polymers were synthesized: poly[oxy(11-(3-(9-adeninyl)propionato)-undecanyl-1-thiomethyl)ethylene] (PECH-AP) and poly[oxy(11-(5-(9-adenylethyloxy)-4-oxopentanoato)undecanyl-1-thiomethyl)ethylene] (PECH-AS). These polymers were found to be thermally stable up to 220 °C and could be applied easily by conventional coating processes to produce good quality films. Interestingly, both brush polymers formed molecular multibilayer structures to provide an adenine-rich surface. Despite the structural similarities, PECH-AS surprisingly exhibited higher hydrophilicity and better water sorption properties than PECH-AP. These differences were attributed to the chemical structures in the bristles of the polymers. The adenine-rich surfaces of the polymer films demonstrated selective protein adsorption, suppressed bacterial adherence, facilitated HEp-2 cell adhesion, and exhibited good biocompatibility in mice. However, the high hydrophilicity and good water sorption characteristics of the PECH-AS film suggest that this brush polymer is better suited to applications requiring good biocompatibility and reduced chance of bacterial infection compared with the PECH-AP film.     

Novel conjugated linseed oil-styrene-divinylbenzene copolymers prepared by thermal polymerization. 1. Effect of monomer concentration on the structure and properties

A variety of novel opaque, white polymers ranging from rubbery materials to tough and rigid plastics have been prepared by the thermal polymerization at 85-160 degrees C of varying amounts of 87% conjugated linseed oil, styrene, and divinylbenzene. Gelation of the reactants typically occurs at temperatures higher than 120 degrees C, and fully cured thermosets are obtained after postcuring at 160 degrees C. The fully cured thermosets have been determined by Soxhlet extraction to contain approximately 35-85% cross-linked materials. The microcomposition of these polymers, as determined by 1H NMR spectroscopy, indicates that the cross-linked materials are composed of both soft oily and hard aromatic phases. After solvent extraction, the insoluble materials exhibit nanopores well distributed throughout the polymer matrixes. Dynamic mechanical analysis of these polymers indicates that they are phase separated with a soft rubbery phase having a sharp glass transition temperature of -50 degrees C and a hard brittle plastic phase with a broadened glass transition temperature of 70-120 degrees C. These polymers possess cross-link densities of 0.15-2.41 x 10(4) mol/m3, compressive Young's moduli of 12-438 MPa, and compressive strengths of 2-27 MPa. These materials are thermally stable below 350 degrees C and exhibit a major thermal degradation of 72-90% at 493-500 degrees C.     

Synthesis of beta-cyclodextrin and starch based polymers for sorption of azo dyes from aqueous solutions

Three beta-cyclodextrin (polymers 1-3) and a starch-based (polymer 4) polymers were synthesized using hexamethylene diisocyanate (HMDI) as a cross-linking agent in dry dimethylformamide and used as a sorbent for the removal of some selected azo dyes from aqueous solutions. The cross-linked polymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric and differential scanning calorimetric analysis. Results of sorption showed that cyclodextrin and starch based polymers can be effectively used as a sorbent for the removal of anionic azo dyes. The Influence of the amide groups and the chemical structure of azo dyes are also studied. Results of sorption experiments showed that these adsorbent exhibited high sorption capacities toward Direct Violent 51 (80% for polymer 1, 69% for polymer 2, 70% for polymer 3 and 78% for polymer 4). The sorption capacity of dyes on the polymers was dependent on the presence of sulfonate groups of the anionic dyes. In order to explain the results an adsorption mechanism mainly physical adsorption and interactions such as hydrogen bonding, ion-exchange due to the nature of the polymer network and the formation of an inclusion complex due to the beta-CD molecules through host-guest interaction is proposed.     

Green polymer chemistry: living dithiol polymerization via cyclic intermediates

This paper reports the synthesis and characterization of disulfide polymers obtained by oxidation of 2-[2-(2-sulfanylethoxy)ethoxy]ethanethiol (DODT) using a benign, synergistic system comprised of air, dilute hydrogen peroxide and triethylamine as a catalyst that can be recycled. The dn/dc value of the polymer in THF was determined to obtain absolute molecular weight measurements. High molecular weight disulfide polymers (up to M(n) = 250000 g/mol) with polydispersity indices as low as M(w)/M(n) = 1.15 were obtained. Thermal analysis by DSC and TGA demonstrated that the rubbery polymers had a T(g) of -50 °C and began to degrade at 250 °C. Dithiothreitol reduced the polymers back to the original monomeric units in 33 h. MALDI-ToF showed the involvement of oligodisulfide rings (2-14 mers) in the polymerization that displayed the characteristics of a living/controlled polymerization; poly(DODT) was readily chain extended with 1,2-ethanedithiol. The chain extension indicates a class of living polymerization which is governed by radical recombination.     

Improved synthesis with high yield and increased molecular weight of poly(alpha,beta-malic acid) by direct polycondensation

The development of synthetic biodegradable polymers, such as poly(alpha-hydroxy acid), is particularly important for constructing medical devices, including scaffolds and sutures, and has attracted growing interest in the biomedical field. Here, we report a novel approach to preparing high molecular weight poly(malic acid) (HMW--PMA) as a biodegradable and bioabsorbable water-soluble polymer. We investigated in detail the reaction conditions for the simple direct polycondensation of l-malic acid, including the reaction times, temperatures, and catalysts. The molecular weight of synthesized alpha,beta-PMA is dependent on both the reaction temperature and time. The optimum reaction condition to obtain alpha,beta-PMA by direct polycondensation using tin(II) chloride as a catalyst was thus determined to be 110 degrees C for 45 h with a molecular weight of 5300. The method for alpha,beta-PMA synthesis established here will facilitate production of alpha,beta-PMA of various molecular weights, which may have a potential utility as biomaterials.     

Cationic amphiphilic star and linear block copolymers: synthesis, self-assembly, and in vitro gene transfection

A series of amphiphilic star and linear block copolymers were synthesized using ATRP. The core consisted of either polystyrene (PS) or poly(n-butyl acrylate) (PBuA), having different glass-transition (T(g)) values. These polymers were used as macroinitiators in the polymerization of the cationic 2-(dimethylamino)ethyl methacrylate (DMAEMA). The polymers were used to study the effects of polymer architecture and flexibility on the self-assembling properties, DNA complexation, and transfection. All polymers formed core-shell micelles in aqueous solutions and condensed plasmid DNA. Linear PDMAEMA-PBuA-PDMAEMA has transfection efficiency comparable to PEI25K in ARPE19 cell line. Glassy state of the micellar core and star-shaped architecture decreased the DNA transfection compared with the rubbery and linear polymer structures. The polymers showed low cellular toxicity at low nitrogen/phosphate (n/p) ratios.     

Zinc ion-DNA polymer interactions

The adjacent GN7-M-GN7 cross-linking and adjacent G-M-G sandwich-complex models for DNA metal ion binding were evaluated both with native DNAs differing in GC content as well as with the synthetic polymers poly [(dGdC)]2, poly[(dAdT)]2, and poly[(dAdC)(dGdT)]. The effect of Zn2+ was studied in depth, and limited studies were also performed with Co2+ and Mg2+. The results were compared to the extensive information available on Cu2+ binding to native DNAs and poly[(dAdT)]2. At high ratios of metal/base (R), Zn2+ caused all native DNAs to denature with the same melting temperature Tm, approximately 61 degrees C. A similar pattern was reported previously for Cu2+, but the typical Tm was approximately 35 degrees C. The extent of renaturation on cooling DNAs denatured in the presence of Zn2+ increased with GC content, as reported previously for Cu2+. These results, together with previously reported similarities, strongly indicate that the DNA binding characteristics of the two cations are similar. By comparison of the Tm values and hyperchromicity changes monitored at 260 and 282 nm, it is clear that, during thermal denaturation in the presence of Zn2+, both AT and GC regions were denatured, even at high R. The Tm vs R profile for the native DNAs was typical. The rise at low R and subsequent decrease at high R were inversely and directly related, respectively, to GC content. Except for poly[(dAdT)]2, where Tm increased with R, the other synthetic polymers exhibited the increase/decrease pattern. Poly[(dAdC)(dGdT)] gave a Tm value at high R of 54 degrees C. In the absence of Zn2+, this polymer exhibited little hypochromicity on cooling of denatured polymer. However, in the presence of Zn2+, nearly complete hypochromicity was observed, although the midpoint of the cooling curve was lower than the Tm value by approximately 15 degrees C at R = 10. These characteristics were similar to those with native DNAs, although viscosity and CD studies suggested that the "renatured" polymer was not identical to the unheated polymer. Furthermore, addition of Zn2+ after denaturation nearly completely reversed the absorption increase. This finding contrasts with those for native DNAs, where the Zn2+ must be present during denaturation in order to reverse the absorption increase nearly completely on cooling. With some caveats, poly[(dAdC)(dGdT)] appears to be a good model for native DNAs since its properties, including CD and uv changes on addition of Zn2+ to premelted and melted polymer, parallel those of the native polymers.(ABSTRACT TRUNCATED AT 400 WORDS)     

Poly(N-(2-hydroxypropyl) methacrylamide mono/di lactate): a new class of biodegradable polymers with tuneable thermosensitivity

A novel class of thermosensitive and biodegradable polymers, poly(N-(2-hydroxypropyl) methacrylamide mono/di lactate) (poly(HPMAm-mono/di lactate)), was synthesized. The cloud points (CP) of poly(HPMAm-monolactate) and poly(HPMAm-dilactate) in water were 65 and 13 degrees C, respectively. The lower CP for poly(HPMAm-dilactate) is likely due the greater hydrophobicity of the dilactate side group over the monolactate side group. The CP of poly(HPMAm-monolactate-co-HPMAm-dilactate) increased linearly with mol % of HPMA-monolactate, which demonstrates that the CP is tuneable by the copolymer composition.     

Studies on adsorption of dyes on beta-cyclodextrin polymer

Beta-cyclodextrin (beta-CD) polymers are used for the removal of various dyes from aqueous solutions. Three insoluble polymers with different degrees of beta-CD were used. Results of adsorption experiments showed that these polymers exhibited high sorption capacities toward dyes. The mechanism of adsorption was both physical adsorption and hydrogen bonding due to the polymer and the formation of an inclusion complex due to the beta-CD molecules through host-guest interactions.     

The effect of in vivo treatment with triiodothyronine on the in vitro synthesis of protein-poly(ADP)-ribose adducts by isolated cardiocyte nuclei and the separation of poly(ADP)-ribosylated proteins by phenol extraction and electrophoresis

In vivo treatment of rats with triiodothyronine (30 micrograms/100 g of body weight for 4 consecutive days) inhibited poly(ADP)-ribose polymerase activity of cardiocyte nuclei, but low enzymatic activity of nuclei of noncardiocyte origin remained unaffected. RNA synthesis in cardiocyte nuclei isolated from triiodothyronine-treated rats was augmented. A positive correlation was observed between the degree of inhibition of poly(ADP)-ribose polymerase and cardiac ventricular enlargement in triiodothyronine-treated animals. RNA synthesis in isolated cardiocyte nuclei was inhibited by in vitro poly(ADP)-ribosylation only when cardiocyte nuclei were obtained from triiodothyronine-treated animals. In vitro poly(ADP)-ribosylated proteins were isolated from cardiocyte nuclei by solvent partitioning between phenol and aqueous phases. About 90% of the protein-poly(ADP)-ribose adducts partitioned into the aqueous fraction, and the chain length of polymers in this phase was between medium (n = 4-9) and long (n greater than 32), whereas the phenol phase contained protein-oligomer and monomer adducts. Not only the chain length of oligomers but the nature of modified proteins appeared to participate in determining the partitioning of polymer-protein adducts, and different proteins were separated from the two phases by gel electrophoresis. More than 90% of protein-polymer adducts formed by cardiocyte nuclei were not extracted by 0.25 N HCl, indicating prevalence of nonhistone proteins as polymer acceptors. Gel electrophoresis and near quantitative recovery of adducts in a gel system that protected from degradation of adducts to free polymers confirmed the predominance of nonhistone proteins as main acceptors and demonstrated an artifact of autoradiography that seemed to indicate histone H1 as a significant acceptor. Treatment with triiodothyronine diminished poly(ADP)-ribosylation of certain groups of proteins more than others, implying some degree of selectivity of action of the hormone. Catabolism of the polymer in vitro was not affected by triiodothyronine treatment.     

A new strategy for the preparation of supramolecular neutral hydrogels

This paper demonstrates that miscible blends from water-insoluble polymers, such as poly(2,4,4-trimethylhexamethylene terephthalamide) (1), methylamine imidized poly(methyl methacrylate) (2), and aromatic poly(ether sulfone) (3) and water-soluble polymers, such as poly(2-ethyl-2-oxazoline) (4) and poly(N-vinyl pyrrolidone) (5), respectively, represent a new class of supramolecular hydrogels. When the degree of polymerization (DP) of the water-soluble polymer is larger than that of water-insoluble polymer, the resulting hydrogels adsorb extremely high amounts of water (i.e., 229 wt % in the case of the hydrogel 1/4) and remain mechanically tough. The high water uptake capability of these blends is explained by a supramolecular network structure generated by H-bonding and/or other noncovalent interactions between the water-insoluble hydrophobic polymer and water-soluble hydrophilic segments as reversible cross-linking points interconnected by hydrophilic water soluble segments. The glass transition temperatures of these hydrogels are tailored via the ratio between the weight percent of the two polymers and by the glass transition temperature of the parent polymers. These supramolecular hydrogels can be processed from melt or solution and maintain excellent mechanical properties both in dry and in the water swollen state. This class of hydrogels is of interest for areas such as membranes, contact lenses, tissue engineering, and other biomedical applications.     

Overcoming limiting side reactions associated with an NHS-activated precursor of polymethacrylamide-based polymers

Combinatorial polymer libraries have recently gained popularity for the development of novel materials for a variety of biomedical applications including non-viral gene delivery systems and biodegradable polymers for tissue engineering. To streamline the nontrivial task of library synthesis, activated ester homopolymers have been used to serve as a backbone to which primary amine-containing functional groups (NH2-FGs) can be covalently bound at varying ratios. Polymethacryloxysuccinimide (poly(MAOS)) is one such homopolymer that was previously reported to be an attractive precursor for polymeric drug and gene delivery systems. The reported functionalization protocols entailed conjugating the precursor with 2 equiv of the NH2-FG at a reaction concentration of 25 mg poly(MAOS)/150 microL DMSO for either 5 h at 50 degrees C or 16 h at 25 degrees C. More recently, both protocols were revealed to be associated with ring-opening and glutarimide-forming side reactions that compromise the utility of the homopolymer. Using 1-dimensional and 2-dimensional NMR spectroscopy techniques, we have characterized the side product distributions that result from conjugations performed at 50 degrees C/5 h and 25 degrees C/16 h. Moreover, by systematically altering the equivalents of the NH2-FGs, polymer concentration, reaction time, and reaction temperature, we have established a protocol that overcomes these side reactions. Using a final reaction protocol of 5 equiv of the NH2-FG at a reaction concentration of 25 mg poly(MAOS)/600 microL DMSO for 24 h at 75 degrees C, we have obtained functionalized polymers with minimal side products. This protocol is applicable for polymers ranging from 5000 to 50,000 g/mol, compatible with a variety of functional groups, and amenable to conjugating combinations of functional groups.     

In vitro and in vivo evaluation of hydrophilic dendronized linear polymers

Rigid-rod dendronized linear polymers consisting of a poly(4-hydroxystyrene) backbone and fourth-generation polyester dendrons were evaluated in vitro and in vivo to determine their suitability as drug delivery vectors. Cytotoxicity assays indicated that the polymers were well tolerated by cells in vitro. Biodistribution studies of the polymers in both nontumored and tumored mice revealed that as for random coil linear polymers, renal clearance was a function of polymer size, with significant urinary excretion observed for a 67 kDa dendronized polymer. High accumulation in organs of the reticuloendothelial system was exhibited by a dendronized polymer with a very high molecular weight (M(n) = 1740 kDa), but was not as significant for smaller polymers with M(n) = 67 kDa and M(n) = 251 kDa. The rank order for tumor accumulation of the polymers on a percent injected dose per gram tumor basis was 251 kDa approximately 1740 kDa > 67 kDa. These data will help guide the selection of highly functionalizable rigid-rod dendronized polymers with pharmacokinetic properties appropriate for use as drug carriers.     

FT-IR imaging spectroscopy of phase separation in blends of poly(3-hydroxybutyrate) with poly(L-lactic acid) and poly(epsilon-caprolactone)

The detection of phase separation and identification of miscibility in biopolymer blends is an important aspect for the improvement of their physical properties. In this article, the phase separation in blends of poly(3-hydroxybutyrate) (PHB) with poly(L-lactic acid) (PLA) and poly(epsilon-caprolactone) (PCL), respectively, has been studied as a function of the blend composition by FT-IR imaging spectroscopy. For both polymer blend systems, a miscibility gap has been found around the 50:50% (w/w) composition of the two components. Furthermore, the separating phases have been identified as blends of the two polymer components and their compositions could be determined from calibrations based on the spectra of the blends in the compositional range of miscibility. The data derived from FT-IR spectroscopic imaging were corroborated by additional DSC analyses and mechanical stress-strain measurements of polymer blend films, which exhibited a characteristic fracture behavior as a function of PHB composition.     

Blends of aliphatic polyesters. VI. Lipase-catalyzed hydrolysis and visualized phase structure of biodegradable blends from poly(epsilon-caprolactone) and poly(L-lactide)

Phase-separated biodegradable polymer blends were prepared from poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA), and Rhizopus arrhizus lipase-catalyzed hydrolysis and phase structure of the blend films were investigated. Gravimetry revealed that the lipase-catalyzed hydrolysis of PCL in PCL- and PLLA-rich phases is disturbed by the presence of PLLA. Polarimetry confirmed the occurrence of a predominant hydrolysis of PCL and subsequent removal of the hydrolyzed water-soluble PCL oligomers in the blend films. Gravimetry and gel permeation chromatography of the non-blended PLLA film indicated that R. arrhizus lipase has no catalytic effect on the hydrolysis of PLLA. The phase structure of the blend films could be visualized by selective enzymatic removal of one component and subsequent scanning electron microscopic observation.     

Amine-reactive biodegradable diblock copolymers

A new class of diblock copolymers was synthesized from biodegradable poly(lactic acid) and poly(ethylene glycol)minus signmonoamine. These polymers were activated by covalently attaching linkers such as disuccinimidyl tartrate or disuccinimidyl succinate to the hydrophilic polymer chain. The polymers were characterized by (1)H NMR spectroscopy, (13)C NMR spectroscopy and gel permeation chromatography (GPC). These investigations indicated that the polymers were obtained with the correct composition, in high purities, and the expected molecular weight. By using dyes containing primary amine groups such as 5-aminoeosin as model substrates, it was possible to show that the polymers are able to bind such compounds covalently. The diblock copolymers were developed to suppress unspecific protein adsorption and allow the binding of bioactive molecules by instant surface modification. The polymers are intended to be used for tissue engineering applications where surface immobilized cell adhesion peptides or growth factors are needed to control cell behavior.     

Studies of chitosan: II. Preparation and characterization of chitosan/poly(vinyl alcohol)/gelatin ternary blend films

Chitosan/poly(vinyl alcohol)/gelatin (CS/PVA/GA) ternary blend films were prepared by solution blending method in this study. The thermal properties of the CS/PVA/GA ternary blend films were examined by differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The melting point of the CS/PVA/GA ternary blend film was increased when the amount of GA in the blend film was increased based upon the DSC thermal analysis. Results of X-ray diffraction (XRD) analyses indicated that the intensity of diffraction peak at 19 degrees of PVA became lower and broader with increasing the amount of GA in the CS/PVA/GA ternary blend film. Although CS, PVA, and GA are hydrophilic biodegradable polymers, the results of water contact angle measurements are still as high as 83 degrees, 68 degrees, and 66 degrees, respectively. A minimum water contact angle (56 degrees) was observed when the ternary blend film contains 50 wt.% GA (i.e. GA5). This behavior is primarily due to the reorientation of polar functional groups toward to the top surface of CS/PVA/GA ternary blend films.     

Evaluation of Ionotropic Cross-Linked Chitosan/Gelatin B Microspheres of Tramadol Hydrochloride

Microspheres of tramadol hydrochloride (TM) for oral delivery were prepared by complex coacervation method without the use of chemical cross-linking agents such as glutaraldehyde to avoid the toxic reactions and other undesirable effects of the chemical cross-linking agents. Alternatively, ionotropic gelation was employed by using sodium-tripolyphosphate as cross-linking agent. Chitosan and gelatin B were used as polymer and copolymer, respectively. All the prepared microspheres were subjected to various physicochemical studies, such as drug–polymer compatibility by thin layer chromatography (TLC) and Fourier transform infrared (FTIR) spectroscopy, surface morphology by scanning electron microscopy, frequency distribution, drug entrapment efficiency, in vitro drug release characteristics and release kinetics. The physical state of drug in the microspheres was determined by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). TLC and FTIR studies indicated no drug–polymer incompatibility. All the microspheres showed initial burst release followed by a fickian diffusion mechanism. DSC and XRD analysis indicated that the TM trapped in the microspheres existed in an amorphous or disordered-crystalline status in the polymer matrix. From the preliminary trials, it was observed that it may be possible to formulate TM microspheres by using biodegradable natural polymers such as chitosan and gelatin B to overcome the drawbacks of TM and to increase the patient compliance.     

Thermally cross-linked oligo(poly(ethylene glycol) fumarate) hydrogels support osteogenic differentiation of encapsulated marrow stromal cells in vitro

A novel polymer, oligo(poly(ethylene glycol) fumarate) (OPF), cross-linked with a thermal radical initiation system has recently been developed in our laboratory as an injectable, biodegradable cell carrier for regeneration of orthopaedic tissues. The cross-linking, swelling, and degradative properties of hydrogels prepared from OPF with poly(ethylene glycol) of two different chain lengths were assessed. The two OPF types had similar gelation onset times ( approximately 3.6 min) but, when cross-linked for 8 min at 37 degrees C, exhibited significantly different swelling characteristics (fold swelling: 17.5 +/- 0.2 vs 13.4 +/- 0.4). Rat marrow stromal cells (MSCs) were then directly combined with the hydrogel precursors and encapsulated in a model OPF formulation at approximately 14 million cells/mL, cultured in vitro in the presence of osteogenic supplements (dexamethasone), and monitored over 28 days via histology. MSC differentiation in these samples (6 mm diameter x 0.5 mm thick before swelling), as determined by Von Kossa staining for calcified matrix, was apparent by day 21. At day 28, mineralized matrix could be seen throughout the samples, many microns away from the cells. These experiments strongly support the usefulness of thermally cross-linked OPF hydrogels as injectable cell carriers for bone regeneration.     

In vivo study on the histocompatibility and degradation behavior of biodegradable poly(trimethylene carbonate-co-D,L-lactide)

The aim of this study was to explore the in vivo behavior and histocompatibility of poly(trimethylene carbonate-co-D,L-lactide) (PDLLA/TMC) and its feasibility of manufacturing cardiovascular stents. Copolymers with 50/50 molar ratio were synthesized by ring-opening polymerization with TMC and D, L-LA, or TMC and L-LA. Poly(L-lactide) (PLLA) was synthesized as a control. The films of the three polymers were implanted into 144 Wistar rats. At different time points of implantation, polymer films were explanted for the evaluation of degradation characteristics and histocompatibility using size exclusion chromatography , nuclear magnetic resonance , environmental scanning electron microscope , and optical microscope. Results showed that there were differences in the percentage of mass loss, molecular weight, shape and appearance changes, and inflammation cell counts between different polymers. With the time extended, the film's superficial structure transformed variously, which was rather obvious in the polymer of PDLLA/TMC. In addition, there were relatively lower inflammation cell counts in the PDLLA/TMC and poly(trimethylene carbonate-co-L-lactide) (PLLA/TMC) groups at different time points in comparison with those in the PLLA group. The differences were of statistical significance (P< 0.05) in the group of PDLLA/TMC vs. PLLA, and the group of PLLA/TMC vs. PLLA, but not within the PDLLA/TMC and PLLA/TMC groups (P> 0.05). These results suggested that the polymer of PDLLA/TMC (50/50) with favorable degradation performance and histocompatibility is fully biodegradable and suitable for manufacturing implanted cardiovascular stents.