Development of an efficient genetic manipulation strategy for sequential gene disruption and expression of different heterologous <Emphasis Type="Italic">GFP</Emphasis> genes in <Emphasis Type="Italic">Candida tropicalis</Emphasis>

The diploid yeast Candida tropicalis, which can utilize n-alkane as a carbon and energy source, is an attractive strain for both physiological studies and practical applications. However, it presents some characteristics, such as rare codon usage, difficulty in sequential gene disruption, and inefficiency in foreign gene expression, that hamper strain improvement through genetic engineering. In this work, we present a simple and effective method for sequential gene disruption in C. tropicalis based on the use of an auxotrophic mutant host defective in orotidine monophosphate decarboxylase (URA3). The disruption cassette, which consists of a functional yeast URA3 gene flanked by a 0.3 kb gene disruption auxiliary sequence (gda) direct repeat derived from downstream or upstream of the URA3 gene and of homologous arms of the target gene, was constructed and introduced into the yeast genome by integrative transformation. Stable integrants were isolated by selection for Ura⁺ and identified by PCR and sequencing. The important feature of this construct, which makes it very attractive, is that recombination between the flanking direct gda repeats occurs at a high frequency (10^?8) during mitosis. After excision of the URA3 marker, only one copy of the gda sequence remains at the recombinant locus. Thus, the resulting ura3 strain can be used again to disrupt a second allelic gene in a similar manner. In addition to this effective sequential gene disruption method, a codon-optimized green fluorescent protein-encoding gene (GFP) was functionally expressed in C. tropicalis. Thus, we propose a simple and reliable method to improve C. tropicalis by genetic manipulation.     

PCR- and ligation-mediated synthesis of split-marker cassettes with long flanking homology regions for gene disruption in Candida albicans

Because Candida albicans is a diploid organism, two consecutive steps of gene disruption are required to generate a gene knock-out. The same marker (URA3) is often used for disruption of both copies of the gene. This is possible because, after the first round of disruption, homologous recombination between direct repeats flanking the URA3 marker and the subsequent counterselection allow for the efficient recovery of Ura- revertants. Unfortunately, the URA-blaster disruption cassette cannot be used in a PCR-based disruption approach. The hisG repeats flanking the URA3 gene in the disruption cassette anneal to one another during PCR and thereby prevent amplification of the complete cassette. We explored the use of transformation based on split-marker recombination to circumvent this problem. To avoid any cloning steps and to retain the advantage of long flanking regions for disruption, we combined this with a PCR- and ligation-mediated approach for generating marker cassettes. We used this approach to disrupt the C. albicans FAL1 (ATP-dependent RNA helicase) gene. Long 5' and 3' FAL1-specific regions were amplified by PCR and individually ligated to a URA-blaster cassette. The resulting ligation reactions were used separately as templates to generate two FAL1 disruption cassettes with overlapping URA3 marker regions. Simultaneous transformation with both overlapping disruption cassettes yielded efficient disruption of one FAL1 allele.     

Size Of Gene Specific Inverted Repeat - Dependent Gene Deletion In Saccharomyces cerevisiae

We describe here an approach for rapidly producing scar-free and precise gene deletions in S. cerevisiae with high efficiency. Preparation of the disruption gene cassette in this approach was simply performed by overlap extension-PCR of an invert repeat of a partial or complete sequence of the targeted gene with URA3. Integration of the prepared disruption gene cassette to the designated position of a target gene leads to the formation of a mutagenesis cassette within the yeast genome, which consists of a URA3 gene flanked by the targeted gene and its inverted repeat between two short identical direct repeats. The inherent instability of the inverted sequences in close proximity facilitates the self-excision of the entire mutagenesis cassette deposited in the genome and promotes homologous recombination resulting in a seamless deletion via a single transformation. This rapid assembly circumvents the difficulty during preparation of disruption gene cassettes composed of two inverted repeats of the URA3, which requires the engineering of unique restriction sites for subsequent digestion and T4 DNA ligation in vitro. We further identified that the excision of the entire mutagenesis cassette flanked by two DRs in the transformed S. cerevisiae is dependent on the length of the inverted repeat of which a minimum of 800 bp is required for effective gene deletion. The deletion efficiency improves with the increase of the inverted repeat till 1.2 kb. Finally, the use of gene-specific inverted repeats of target genes enables simultaneous gene deletions. The procedure has the potential for application on other yeast strains to achieve precise and efficient removal of gene sequences.     

Neocentromeres Form Efficiently at Multiple Possible Loci in Candida albicans

Centromeres are critically important for chromosome stability and integrity. Most eukaryotes have regional centromeres that include long tracts of repetitive DNA packaged into pericentric heterochromatin. Neocentromeres, new sites of functional kinetochore assembly, can form at ectopic loci because no DNA sequence is strictly required for assembly of a functional kinetochore. In humans, neocentromeres often arise in cells with gross chromosome rearrangements that rescue an acentric chromosome. Here, we studied the properties of centromeres in Candida albicans, the most prevalent fungal pathogen of humans, which has small regional centromeres that lack pericentric heterochromatin. We functionally delimited centromere DNA on Chromosome 5 (CEN5) and then replaced the entire region with the counter-selectable URA3 gene or other marker genes. All of the resulting cen5Δ::URA3 transformants stably retained both copies of Chr5, indicating that a functional neocentromere had assembled efficiently on the homolog lacking CEN5 DNA. Strains selected to maintain only the cen5Δ::URA3 homolog and no wild-type Chr5 homolog also grew well, indicating that neocentromere function is independent of the presence of any wild-type CEN5 DNA. Two classes of neocentromere (neoCEN) strains were distinguishable: “proximal neoCEN” and “distal neoCEN” strains. Neocentromeres in the distal neoCEN strains formed at loci about 200–450 kb from cen5Δ::URA3 on either chromosome arm, as detected by massively parallel sequencing of DNA isolated by CENP-A^Cse4p chromatin immunoprecipitation (ChIP). In the proximal neoCEN strains, the neocentromeres formed directly adjacent to cen5Δ::URA3 and moved onto the URA3 DNA, resulting in silencing of its expression. Functional neocentromeres form efficiently at several possible loci that share properties of low gene density and flanking repeated DNA sequences. Subsequently, neocentromeres can move locally, which can be detected by silencing of an adjacent URA3 gene, or can relocate to entirely different regions of the chromosome. The ability to select for neocentromere formation and movement in C. albicans permits mechanistic analysis of the assembly and maintenance of a regional centromere.     

Construction of Uracil and Tryptophan Auxotrophic Mutants from Sake Yeasts by Disruption of URA3 and TRP1 Genes

Uracil auxotrophic mutants were constructed from the sake yeasts K-701 and K-901 by successive URA3 gene disruption. First, as sake yeast is diploid, one URA3 gene was disrupted with pURA38 (AURA3 SMR1) and the heterozygous disruptant was isolated on an SM (sulfometuron methyl) plate. The other URA3 gene was disrupted with pURA36 (Δ URA3) and homozygous URA3 disruptants were isolated on FOA (5-fluoro-orotic acid) plate on which only ura3 mutants can grow. Direct URA3 gene disruption with pURA36 (Δ URA3) was also done and the uracil auxotrophic mutant was isolated. Four types of URA3 disruptants were isolated, two of which had no bacterial DNA.

A tryptophan auxotrophic mutant was constructed from one of the URA3 disruptant using pTRP14 (Δ TRP1 URA3) by gene disruption. This TRP1 disruptant was also lacking bacterial DNA.

Laboratory scale sake brewing using the auxotrophic mutants showed that these strains are very useful as recipient strains for molecular breeding of sake yeasts.     

High-Temperature Ethanol Fermentation and Transformation with Linear DNA in the Thermotolerant Yeast Kluyveromyces marxianus DMKU3-1042

We demonstrate herein the ability of Kluyveromyces marxianus to be an efficient ethanol producer and host for expressing heterologous proteins as an alternative to Saccharomyces cerevisiae. Growth and ethanol production by strains of K. marxianus and S. cerevisiae were compared under the same conditions. K. marxianus DMKU3-1042 was found to be the most suitable strain for high-temperature growth and ethanol production at 45°C. This strain, but not S. cerevisiae, utilized cellobiose, xylose, xylitol, arabinose, glycerol, and lactose. To develop a K. marxianus DMKU3-1042 derivative strain suitable for genetic engineering, a uracil auxotroph was isolated and transformed with a linear DNA of the S. cerevisiae ScURA3 gene. Surprisingly, Ura⁺ transformants were easily obtained. By Southern blot hybridization, the linear ScURA3 DNA was found to have inserted randomly into the K. marxianus genome. Sequencing of one Lys⁻ transformant confirmed the disruption of the KmLYS1 gene by the ScURA3 insertion. A PCR-amplified linear DNA lacking K. marxianus sequences but containing an Aspergillus α-amylase gene under the control of the ScTDH3 promoter together with an ScURA3 marker was subsequently used to transform K. marxianus DMKU3-1042 in order to obtain transformants expressing Aspergillus α-amylase. Our results demonstrate that K. marxianus DMKU3-1042 can be an alternative cost-effective bioethanol producer and a host for transformation with linear DNA by use of S. cerevisiae-based molecular genetic tools.     

The orotidine-5′-phosphate decarboxylase gene (URA3) of a methylotrophic yeast,Candida boidinii: Nucleotide sequence and its expression in Escherichia coli

Previously, we cloned a DNA fragment from a genomic library of a methylotrophic yeast, Candida boidinii. This 3.5-kb SalI fragment was capable of complementing the pyrF mutation in Escherichia coli. In this report, we identify this fragment as that harboring an orotidine-5′-phosphate decarboxylase (ODCase) gene (C. boidinii URA3); we have also determined the complete DNA sequence of the C. boidinii URA3 gene. The deduced amino acid sequence of the gene showed homology to ODCase genes from other sources, and it could complement the ura3 mutation of Saccharomyces cerevisiae. The DNA fragment, which harbored the C. boidinii URA3 gene, was able to express ODCase activity in the E. coli pyrF mutant strain without an exogenous E. coli promoter. From nested-deletion analysis, both the 5′-(136 bp) and 3′-(58 bp) flanking regions were shown to be required for pyrF-complementation of the E. coli mutant. The 5′-flanking region had sequences homologous to E. coli promoter consensus sequences (−35 and −10 regions) which may function in the expression of the C. boidinii URA3 gene in E. coli.     

Overcoming recalcitrant transformation and gene manipulation in Pucciniomycotina yeasts

The red yeasts of the Pucciniomycotina have rarely been transformed with DNA molecules. Transformation methods were recently developed for a species of Sporobolomyces, based on selection using uracil auxotrophs and plasmids carrying the wild-type copies of the URA3 and URA5 genes. However, these plasmids were ineffective in the transformation of closely related species. Using the genome-sequenced strain of Rhodotorula graminis as a starting point, the URA3 and URA5 genes were cloned and tested for the transformation ability into different Pucciniomycotina species by biolistic and Agrobacterium-mediated transformations. Transformation success depended on the red yeast species and the origin of the URA3 or URA5 genes, which may be related to the high G?+?C DNA content found in several species. A new vector was generated to confer resistance to nourseothricin, using a native promoter from R. graminis and the naturally high G?+?C nourseothricin acetyltransferease gene. This provides a second selectable marker in these species. Targeted gene disruption was tested in Sporobolomyces sp. IAM 13481 using different lengths of homologous DNA with biolistic and Agrobacterium transformation methods. Both DNA delivery methods were effective for targeted replacement of a gene required for carotenoid pigment biosynthesis. The constructs also triggered transgene silencing. These developments open the way to identify and manipulate gene functions in a large group of basidiomycete fungi.     

Efficient homologous recombination with short length flanking fragments in Ku70 deficient Yarrowia lipolytica strains

In Yarrowia lipolytica, targeted gene replacement occurs only with long length (1 kb) homologous flanking fragments, as this yeast preferentially uses the non-homologous end-joining mechanism (NHEJ) for DNA repair over homologous recombination (HR). To improve the frequency of HR, we identified and disrupted the KU70 and KU80 genes responsible for double strand break repair in the NHEJ pathway in Y. lipolytica. In ku70? HR of URA3 marker at the ADE2 locus occurred with 43 % frequency with as little as 50 bp long flanking regions. The number of Ura⁺ transformants was reduced to 1 % of the Po1d (ura3-302) wild type-like strain level, regardless of the flanking fragment length. On the contrary, even though HR was not improved in ku80?, Ura⁺ transformants was 60 % lower compared to the wild type.     

A second set of loxP marker cassettes for Cre-mediated multiple gene knockouts in budding yeast

Heterologous markers are important tools required for the molecular dissection of gene function in many organisms, including Saccharomyces cerevisiae. Moreover, the presence of gene families and isoenzymes often makes it necessary to delete more than one gene. We recently introduced a new and efficient gene disruption cassette for repeated use in budding yeast, which combines the heterologous dominant kan^r resistance marker with a Cre/loxP-mediated marker removal procedure. Here we describe an additional set of four completely heterologous loxP-flanked marker cassettes carrying the genes URA3 and LEU2 from Kluyveromyces lactis, his5⁺ from Schizosaccharomyces pombe and the dominant resistance marker ble^r from the bacterial transposon Tn5, which confers resistance to the antibiotic phleomycin. All five loxP–marker gene–loxP gene disruption cassettes can be generated using the same pair of oligonucleotides and all can be used for gene disruption with high efficiency. For marker rescue we have created three additional Cre expression vectors carrying HIS3, TRP1 or ble^r as the yeast selection marker. The set of disruption cassettes and Cre expression plasmids described here represents a significant further development of the marker rescue system, which is ideally suited to functional analysis of the yeast genome.     

Directed mutagenesis in an asporogenous methylotrophic yeast: cloning, sequencing, and one-step gene disruption of the 3-isopropylmalate dehydrogenase gene (LEU2) of Candida boidinii to derive doubly auxotrophic marker strains.

A model system for one-step gene disruption for an asporogenous methylotrophic yeast, Candida boidinii, is described. In this system, the 3-isopropylmalate dehydrogenase gene (C. boidinii LEU2) was selected as the target gene for disruption to derive new host strains for transformation. First, the C. boidinii LEU2 gene was cloned, and its complete nucleotide sequence was determined. Next, the LEU2 disruption vectors, which had the C. boidinii URA3 gene as the selectable marker, were constructed. Of the Ura+ transformants obtained with these plasmids, more than half showed a Leu- phenotype. Finally, the double-marker strains of C. boidinii were derived. When vectors with repeated flanking sequences of the C. boidinii URA3 gene were used for gene disruption, Leu- Ura+ transformants changed spontaneously to a Leu- Ura- phenotype ca. 100 times more frequently than they did when plasmids without the repeated sequences were used. Southern analysis showed that these events included a one-step gene disruption and a subsequent popping out of the C. boidinii URA3 sequence from the transformant chromosome.     

Stable transformation and regulated expression of an inducible reporter construct inCandida albicans using restriction enzyme-mediated integration

To allow the regulated expression of cloned genes inCandida albicans, a plasmid was constructed using the inducible promoter of theC. albicans MAL2 gene. To demonstrate that theMAL2 promoter could regulate cloned genes placed under its control, a fusion construct was made with the coding sequence of theC. albicans URA3 gene. This plasmid was introduced into a Ura^? strain ofC. albicans using the process of restriction enzyme-mediated integration (REMI). This procedure involves the transformation of theBamHI-linearized plasmid in the presence ofBamHI enzyme. The majority of transformants generated contained insertions of the plasmid at chromosomalBamHI sites. All transformants examined were inducible forURA3 expression, which was determined by growth analysis and by measuring the level ofURA3 gene product activity. The Ura⁺ phenotype of the transformants was stable during growth under nonselective conditions. This system offers the advantages of stable transformation, easy recovery of integrated DNA, and inducible expression of genes inC. albicans.     

Sequential gene disruption in Candida albicans by FLP-mediated site-specific recombination

The genetic manipulation of the human fungal pathogen Candida albicans is difficult because of its diploid genome, the lack of a known sexual phase and its unusual codon usage. We devised a new method for sequential gene disruption in C. albicans that is based on the repeated use of the URA3 marker for selection of transformants and its subsequent deletion by FLP-mediated, site-specific recombination. A cassette was constructed that, in addition to the URA3 selection marker, contained an inducible SAP2P-FLP fusion and was flanked by direct repeats of the minimal FLP recognition site (FRT). This URA3 flipper cassette was used to generate homozygous C. albicans mutants disrupted for both alleles of either the CDR4 gene, encoding an ABC transporter, or the MDR1 gene, encoding a membrane transport protein of the major facilitator superfamily. After insertion of the URA3 flipper into the first copy of the target gene, the whole cassette could be efficiently excised by induced FLP-mediated recombination, leaving one FRT site in the disrupted allele of the target gene. The URA3 flipper was then used for another round of mutagenesis to disrupt the second allele. Deletion of the cassette from primary and secondary transformants occurred exclusively by intrachromosomal recombination of the FRT sites flanking the URA3 flipper, whereas interchromosomal recombination between FRT sites on the homologous chromosomes was never observed. This new gene disruption strategy facilitates the generation of specific, homozygous C. albicans mutants as it eliminates the need for a negative selection scheme for marker deletion and minimizes the risk of mitotic recombination in sequential disruption experiments.     

Genetic transformation of the yeast Rhodotorula gracilis ATCC 26217 by electroporation

We examined the genetic transformation of the biotechnologically relevant yeast Rhodotorula gracilis ATCC 26217 by electroporation. To evaluate the yeast transformation, we created a genomic integration cassette that was targeted to the yeast orotidine-5′-phosphate decarboxylase gene (URA3 gene) locus and composed of the zeocin-resistant gene (Sh ble gene) with the URA3 promoter and terminator of the yeast. The yeast was unable to grow on medium containing 2.0 μg/mL zeocin, even with the inoculation of a large number of cells (approximately 1.0 × 10⁸ cells/plate). Using the integrative cassette and zeocin-containing medium, we successfully obtained yeast transformants by electroporation, and the highest transformation efficiency of approximately 40 colony-forming units/μg DNA was obtained with a 0.6-kV electrical pulse. No homologous integration of the cassette at the URA3 gene locus was detected by the analyses of uracil auxotrophy and genomic PCR of transformants, suggesting that this method is a useful tool for randomly mutating the yeast genome.     

One-step gene disruption by cotransformation to isolate double auxotrophs in Candida albicans

Summary The Candida albicans LEU2 gene was disrupted by substituting lambda DNA for a small deletion within the LEU2 gene. Cotransformation with a selectable URA3 ARS vector was used to introduce a linear fragment containing the disruption into the genome of a C. albicans ura3 deletion mutant. Cotransformants containing the lambda DNA were identified by colony hybridization and the URA3 plasmid was subsequently cured. Leu2 disrupted heterozygotes were detected by Southern hybridization and one disruptant was subsequently treated with UV irradiation. Only one leu2 ura3 mutant (SGY-484) was isolated out of 11,000 mutagenized cells. SGY-484 was transformed to Leu⁺ with either the C. albicans or Saccharomyces cerevisiae LEU2 gene. Southern hybridization analysis revealed that the mutant is not homozygous for the disruption; the leu2 mutation reverts and is most likely a point mutation. Unexpectedly, an ade2 ura3 mutant was isolated from the same mutagenesis.     

Elevated Growth of Saccharomyces cerevisiae ATH1 Null Mutants on Glucose Is an Artifact of Nonmatching Auxotrophies of Mutant and Reference Strains

Yeast strains disrupted for ATH1, which encodes vacuolar acid trehalase, have been reported to grow to higher cell densities than reference strains. We showed that the increase in cell density is due to the URA3 gene introduced as a part of the disruption and concluded that the misinterpretation is a result of not using a control strain with matching auxotrophic markers.     

Rare Homologous Gene Targeting in Histoplasma capsulatum: Disruption of the URA5Hc Gene by Allelic Replacement

URA5 genes encode orotidine-5′-monophosphate pyrophosphorylase (OMPpase), an enzyme involved in pyrimidine biosynthesis. We cloned the Histoplasma capsulatum URA5 gene (URA5_Hc) by using a probe generated by PCR with inosine-rich primers based on relatively conserved sequences in OMPpases from other organisms. Transformation with this gene restored uracil prototrophy and OMPpase activity to UV-mutagenized ura5 strains of H. capsulatum. We attempted to target the genomic URA5 locus in this haploid organism to demonstrate homologous allelic replacement with transforming DNA, which has not been previously done in H. capsulatum and has been challenging in some other pathogenic fungi. Several strategies commonly used in Saccharomyces cerevisiae and other eukaryotes were unsuccessful, due to the frequent occurrence of ectopic integration, linear plasmid formation, and spontaneous resistance to 5-fluoroorotic acid, which is a selective agent for URA5 gene inactivation. Recent development of an efficient electrotransformation system and of a second selectable marker (hph, conferring hygromycin B resistance) for this fungus enabled us to achieve allelic replacement by using transformation with an insertionally inactivated Δura5_Hc::hph plasmid, followed by dual selection with hygromycin B and 5-fluoroorotic acid, or by screening hygromycin B-resistant transformants for uracil auxotrophy. The relative frequency of homologous gene targeting was approximately one allelic replacement event per thousand transformants. This work demonstrates the feasibility but also the potential challenge of gene disruption in this organism. To our knowledge, it represents the first example of experimentally directed allelic replacement in H. capsulatum, or in any dimorphic systemic fungal pathogen of humans.     

Factors influencing the recombinational expansion and spread of telomeric tandem arrays in Kluyveromyces lactis

We have previously shown that DNA circles containing telomeric repeats and a marker gene can promote the recombinational elongation of telomeres in Kluyveromyces lactis by a mechanism proposed to involve rolling-circle DNA synthesis. Wild-type cells acquire a long tandem array at a single telomere, while telomerase deletion (ter1-Δ) cells, acquire an array and also spread it to multiple telomeres. In this study, we further examine the factors that affect the formation and spread of telomeric tandem arrays. We show that a telomerase⁺ strain with short telomeres and high levels of subtelomeric gene conversion can efficiently form and spread arrays, while a telomere fusion mutant is not efficient at either process. This indicates that an elevated level of gene conversion near telomeres is required for spreading but that growth senescence and a tendency to elongate telomeres in the absence of exogenously added circles are not. Surprisingly, telomeric repeats are frequently deleted from a transforming URA3-telomere circle at or prior to the time of array formation by a mechanism dependent upon the presence of subtelomeric DNA in the circle. We further show that in a ter1-Δ strain, long tandem arrays can arise from telomeres initially containing a single-copy insert of the URA3-telomere sequence. However, the reduced rate of array formation in such strains suggests that single-copy inserts are not typical intermediates in arrays formed from URA3-telomere circles. Using heteroduplex circles, we have demonstrated that either strand of a URA3-telomere circle can be utilized to form telomeric tandem arrays. Consistent with this, we demonstrate that 100-nucleotide single-stranded telomeric circles of either strand can promote recombinational telomere elongation.