Plasmids with temperature-dependent copy number for amplification of cloned genes and their products

Miniplasmids (pKN402 and pKN410) were isolated from runaway-replication mutants of plasmid R1. At 30°C these miniplasmids are present in 20–50 copies per cell of Escherichia coli, whereas at temperatures above 35°C the plasmids replicate without copy number control during 2–3 h. At the end of this period plasmid DNA amounts to about 75% of the total DNA. During the gene amplification, growth and protein synthesis continue at normal rate leading to a drastic amplification of plasmid gene products. Plasmids pKN402 (4.6 Md) and pKN410 (10 Md) have single restriction sites for restriction endonucleases EcoRI and HindIII; in addition plasmid pKN410 has a single BamHI site and carries ampicillin resistance. The plasmids can therefore be used as cloning vectors. Several genes were cloned into these vectors using the EcoRI sites; chromosomal as well as plasmid-coded β-lactamase was found to be amplified up to 400-fold after thermal induction of the runaway replication. Vectors of this temperature-dependent class will be useful in the production of large quantities of genes and gene products. These plasmids have lost their mobilization capacity. Runaway replication is lethal to the host bacteria in rich media. These two properties contribute to the safe use of the plasmids as cloning vehicles.     

Transposon mutagenesis in Caulobacter crescentus

Transposons Tn5 (Km) and Tn7 (Tp and Sm) were transferred to Caulobacter crescentus via P-type antibiotic resistance factors. Transposition was demonstrated by the isolation of chromosomal insertions of each transposon. With C. crescentus strains harboring RP4 aphA::Tn7, the introduction of a wild-type RP4 resulted in the loss of the resident plasmid. Simultaneous selection for Kmr and Smr yielded colonies with chromosomal insertions of Tn7. Examination of over 10,000 chromosomal insertions of Tn7 indicated no auxotrophic or motility mutants. Thus, Tn7 appears to have a high specificity of insertion in C. crescentus. The Mu-containing plasmid pJB4JI transferred Tn5 to C. crescentus, but the plasmid was not maintained. Control experiments showed that recovery of Mu-containing plasmids occurred at very low frequencies in C. crescentus and that the plasmids which were recovered had undergone extensive deletion of plasmid DNA. Presumably, some part of the Mu genome was not tolerated by C. crescentus. The instability of the Mu-containing plasmids makes them excellent vectors for the introduction of transposons, and we have used pJB4JI to isolated chromosomal insertions of Tn5. When several thousand of these insertion mutants were examined, we found auxotrophic and motility mutants at frequencies of 1 and 2%, respectively. These results indicate that Tn5 had a low specificity of insertion in C. crescentus and therefore would be a useful mutagen for obtaining a variety of mutant phenotypes.     

Gene-specific transposon mutagenesis of the biphenyl/polychlorinated biphenyl-degradation-controlling bph operon in soil bacteria.

A transposon, Tn5-B21, was gene-specifically inserted into the chromosomal biphenyl/polychlorinated biphenyl-catabolic operon (bph operon) of soil bacteria. The cloned bphA, bphB and bphC genes of Pseudomonas pseudoalcaligenes KF707, coding for conversion of biphenyl into a ring meta-cleavage product (2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid), carried random insertions of Tn5-B21. The mutagenized bphABC DNA, carried by a suicide plasmid, was introduced back into the parent strain KF707, resulting in the appearance of gene-specific transposon mutants by double crossover homologous recombination: the bphA::Tn5-B21 mutant did not attack 4-chlorobiphenyl, the bphB::Tn5-B21 mutant accumulated dihydrodiol, and the bphC::Tn5-B21 mutant produced dihydroxy compound. Gene-specific transposon mutants of the bph operon were also obtained for some other biphenyl-utilizing strains which possess bph operons nearly identical to that of KF707.     

Transposition of Tn7 in Pseudomonas aeruginosa and Isolation of alk::Tn7 Mutations

Conjugal crosses with Pseudomonas aeruginosa donors carrying the CAM-OCT and RP4::Tn7 plasmids result in transfer of the Tn7 trimethoprim resistance (Tp(r)) determinant independently of RP4 markers. All Tp(r) exconjugants which lack RP4 markers have CAM-OCT genes and therefore must have received CAM-OCT::Tn7 plasmids formed by transposition of Tn7 from RP4::Tn7 to CAM-OCT. Most crosses yield exconjugants carrying mutant CAM-OCT plasmids which no longer determine either camphor or alkane utilization and thus appear to carry Tn7 inserts in the cam or alk loci, respectively. Transduction and reversion experiments indicated that at least 13 alkane-negative, camphor-positive, Tp(r) CAM-OCT::Tn7 plasmids carry an alk::Tn7 mutation. Determination of linkage between the alk mutation and the Tp(r) determinant of Tn7 on these plasmids is complicated by the presence of multiple copies of the Tn7 element in the genome. Generalized transduction will remove Tn7 from a CAM-OCT alk::Tn7 plasmid to yield alk(+) cells which carry no Tp(r) determinant on the CAM-OCT plasmid (as shown by transfer of the plasmid to a second strain). But the transduction to alk(+) does not remove all Tp(r) determinants from the genome of the recipient cell because the alkane-positive transductants remain trimethoprim resistant. Thus, it appears that copies of Tn7 can accumulate in the genome of P. aeruginosa (CAM-OCT alk::Tn7) strains without leaving their original site. This result is consistent with transposition models that involve replication of the transposable element without excision from the original site.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.     

Map of plasmid RP4 derived by insertion of transposon C.

We have determined the location of 36 sites on plasmid RP4 into which transposon C (an 8.5 × 10⁶ molecular weight DNA sequence conferring trimethoprim and streptomycin resistance) had spontaneously inserted itself. These were located by sucrose gradient analysis of EcoRI-generated and then, separately, the HindIII-generated DNA fragments from each RP4-TnC² plasmid. RP4 has a single EcoRI-susceptible site and, suitably displaced from this, a HindIII-susceptible site, whereas TnC has, respectively, one and two sites for these two enzymes. Thus the sizes of the restriction fragments depend on the location and orientation of the inserted TnC.Some of the RP4-TnC clones had lost one of the RP4 characters: transferability (Tra), tetracycline (Tc) or kanamycin (Km) resistances, but no ampicillin (Ap) sensitive clones were detected. Insertions giving each of these phenotypic changes cluster together at positions on the circular RP4 map that presumably locate the genes responsible for the Tra⁺, Km^r and Tc^r phenotypes. The Tra^? plasmids were grouped into four classes on the basis of their conferred phage sensitivities and plasmid copy numbers. The gene giving Ap^r was located by its known proximity to a BamHI-susceptible site. All the plasmids analysed had TnC inserted with one particular orientation. TnC insertions giving no detectable phenotypic change were not randomly placed around RP4, but clustered into certain regions. Two large regions, one containing TnA, had no TnC insertions. Ligation experiments with restriction fragments from various RP4-TnC plasmids led to the conclusion that both these regions contain genes essential to the replication and maintenance of RP4. The location of the HindIII site of RP4 within the gene giving Km^r should prove valuable to the use of this plasmid as a cloning vehicle.     

Development of a Tn10 Vehicle for Insertion Mutagenesis in Rhizobium

A transposon Tn10 vehicle was developed using a self transmissible (Tra⁺) plasmid pRK2013 having narrow host range ori of replication (ColEl). The construct pSA10-3 carrying Tn10 was useful in efficiently transferring transposon Tn10 from E. coli into various rhizobia. The ColEl replicon conferred suicidal property to vector in Rhizobium background where it falls to replicate stably. Thus this plasmid can be employed to cause independent insertion mutations in rhizobia by Tn10 transposition. The frequency of tetracycline resistant colonies of Rhizobium (Tn10 mutants) was approximately 10⁵ folds higher than the spontaneous Tet^R mutants. Reversion frequency of these mutants was less than 10^?8 indicating adequate stability of Tn10 mutations.     

Mutagenesis and chromosome mobilization in Hyphomicrobium facilis B-522.

Spontaneously derived antibiotic-resistant mutants of Hyphomicrobium facilis B-522, a restricted facultative methylotroph, occurred at a high frequency on agar plates with low antibiotic concentrations. Mutants specifically defective in methanol oxidation have been obtained using an allyl alcohol direct selection technique. By chemical mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine in the presence of chloramphenicol several stable auxotrophic mutants could be isolated: three leucine auxotrophs, two threonine auxotrophs, and two leucine-methionine double auxotrophic mutants. Optimal conditions for transposon mutagenesis have been developed by comparing several transposon delivery vectors. With the suicide plasmid pRK2013 as a vector, the tetracycline resistance conferring transposon Tn5-132 was introduced into the genome of H. facilis B-522. The following insertion mutants have been obtained: leu-3::Tn5-132, ilv-1::Tn5-132, and pur-1::Tn5-132. Broad host range IncP-1 plasmids could be successfully transferred by interspecific matings. Chromosome mobilization was demonstrated with the conjugative IncP-1 plasmids RP1, R68.45, pMO60, and H. facilis 2189 (leu-2, met-1, mox-1, nfs-1, str-12) as recipient strain. Transconjugants occurred at frequencies ranging from 10(-6) to 10(-8) for each marker.     

The role of transposons in replication: Tn5 suppresses ts-mutation for plasmid RP1 replication in Escherichia coli cells

Effect of restoration by transposon Tn5 of genetic damage in RP1 plasmid replication (named transposon suppression) was described. Hybrid plasmid, a derivative of RP1 and RP4, having ts mutation for replication--tsr12 and deletion in the aphA gene controlling kanamycin resistance, was constructed. Five of derivatives of this plasmid containing transposon Tn5 were made, and the strains containing both the Tn5 integrated into the chromosome and intact hybrid plasmid or the parental plasmid with the replication ts mutation, were constructed. It was shown that transposon Tn5 comprised within the hybrid plasmid or in the chromosome promotes maintenance of these replication defective plasmids in the bacterial culture at a non-permissive temperature and thus suppresses plasmid mutation tsr12. It was determined that the extent of suppression of plasmid replication ts mutation depends on the localization of transposon Tn5.     

Validation of a Tn5 transposon mutagenesis system for <Emphasis Type="Italic">Gluconacetobacter diazotrophicus</Emphasis> through characterization of a flagellar mutant

Gluconacetobacter diazotrophicus is a nitrogen-fixing bacterium, which was originally isolated from the interior of sugarcane plants. The genome of strain PAL5 of G. diazotrophicus has been completely sequenced and a next step is the functional characterization of its genes. The aim of this study was to establish an efficient mutagenesis method, using the commercial Tn5 transposon EZ::Tn5?<KAN-2>Tnp Transposome? (Epicentre). Up to 1 × 10⁶ mutants per microgram of transposome were generated in a single electroporation experiment. Insertion-site flanking sequences were amplified by inverse PCR and sequenced for 31 mutants. For ten of these mutants, both insertion flanks could be identified, confirming the 9 bp duplication that is typical for Tn5 transposition. Insertions occurred in a random fashion and were genetically stable for at least 50 generations. One mutant had an insertion in a homolog of the flagellar gene flgA, and was therefore predicted to be affected in flagella-dependent traits and used to validate the applied mutagenesis methodology. This mutant lacked flagella and was non-motile on soft agar. Interestingly, it was also strongly affected in the ability to form biofilm on glass wool.     

Transposon vectors containing non-antibiotic resistance selection markers for cloning and stable chromosomal insertion of foreign genes in gram-negative bacteria.

A simple procedure for cloning and stable insertion of foreign genes into the chromosomes of gram-negative eubacteria was developed by combining in two sets of plasmids (i) the transposition features of Tn10 and Tn5; (ii) the resistances to the herbicide bialaphos, to mercuric salts and organomercurial compounds, and to arsenite, and (iii) the suicide delivery properties of the R6K-based plasmid pGP704. The resulting constructions contained unique NotI or SfiI sites internal to either the Tn10 or the Tn5 inverted repeats. These sites were readily used for cloning DNA fragments with the help of two additional specialized cloning plasmids, pUC18Not and pUC18Sfi. The newly derived constructions could be maintained only in donor host strains that produce the R6K-specified pi protein, which is an essential replication protein for R6K and plasmids derived therefrom. Donor plasmids containing hybrid transposons were transformed into a specialized lambda pir lysogenic Escherichia coli strain with a chromosomally integrated RP4 that provided broad-host-range conjugal transfer functions. Delivery of the donor plasmids into selected host bacteria was accomplished through mating with the target strain. Transposition of the hybrid transposon from the delivered suicide plasmid to a replicon in the target cell was mediated by the cognate transposase encoded on the plasmid at a site external to the transposon. Since the transposase function was not maintained in target cells, such cells were not immune to further transposition rounds. Multiple insertions in the same strain are therefore only limited by the availability of distinct selection markers. The utility of the system was demonstrated with a kanamycin resistance gene as a model foreign insert into Pseudomonas putida and a melanin gene from Streptomyces antibioticus into Klebsiella pneumoniae. Because of the modular nature of the functional parts of the cloning vectors, they can be easily modified and further selection markers can be incorporated. The cloning system described here will be particularly useful for the construction of hybrid bacteria that stably maintain inserted genes, perhaps in competitive situations (e.g., in open systems and natural environments), and that do not carry antibiotic resistance markers characteristic of most available cloning vectors (as is currently required of live bacterial vaccines).     

Properties of transposon Tn2555 carrying the genes for sucrose utilization

Tn2555, a new transposon coding for genes of sucrose utilization was studied. Tn2555 was shown to integrate into the plasmids RP4 and R6K, phage P1CmClr100 and Escherichia coli K12 chromosome. Tn2555 frequency of transposition to RP4 and R6K DNA is (2-5) X 10(-7) in Rec+-strain, (3-6) X 10(-8) in Rec--strain. Tn2555 integration site in phage P1CmClr100 Sac+-derivative studied has been localised within the C-segment of P1 DNA. In three independent cases of Tn2555 transposition to the chromosome the transposon was found to be integrated in the region between 29 and 32 min of Escherichia coli K12 linkage map. The restriction endonuclease analysis of seven independent isolates of RP4::Tn2555 has shown the grouping of Tn2555 integration sites in the Tn1 region of RP4. Frequent rearrangements occurring within Tn2555 have been revealed by the analysis. However, an invertible DNA segment of about 6-7 kb was preserved in all transposon structures.     

转座子Tn5-Mob对菜豆根瘤菌共生基因的诱变、转移和初步定位

转座子Tn5-Mob在质粒RP4-4配合下能诱动(Mobilization)菜豆根瘤菌RCR3622内源质粒的诱动转移。在种间根瘤菌杂交过程中,二个巨型质粒的转移频率均大于10~(-3);分子量约为285kb的psym3622是带有结瘤(nod)和产黑素(mel)基因的共生质粒(Symbiotic plasmid);这二个基因的最大距离不超过70kb左右。另一个分子量约为135kb的质粒在试验中为不具结瘤功能的隐蔽质粒。将psym3622共生质粒导入不结瘤(Nod-)的豌豆根瘤菌菌株B151,能够使后者在菜豆植物上表达结瘤的特性,形成无效根瘤。将psym3622共生质粒导入不结瘤的菜豆根瘤菌菌株JI8400,能够在菜豆植物上形成正常发育的有效根瘤。     

Mutagenesis by insertion of the drug resistance transposon Tn7 applied to the Ti plasmid of Agrobacterium tumefaciens

Insertions of the linked trimethoprim and streptomycin resistance transposon Tn7 were isolated in a cointegrated plasmid formed between the Ti-plasmid of Agrobacterium tumefaciens strain B6S3 and the broad host range resistance plasmid RP4. By using the spontaneous dissociation of this cointegrate, we could demonstrate that these insertions had occurred into the Ti as well as into the RP4 part of the cointegrated plasmid. Among the insertions in the Ti part, mutants affected in different Ti plasmid-determined phenotypes, including non-oncogenic mutants, were detected. These mutants are useful for the physical mapping of these plasmid markers.     

Transposon targeting determined by resolvase

The Mu-related transposon Tn5090, also called Tn402, was observed to be highly selective for targets clustered in or close to recombination sites of serine-type recombinases in plasmids R388 and RP1. Transposition to the par area of RP1 responded strongly to a deletion in the gene of resolvase ParA. A search in sequence databanks revealed further insertions of Tn5090/Tn402 close to different genes of resolvases. These results imply that the target selection of Tn5090 depends on a property that is shared among several serine recombinases.     

Relationship of group P1 plasmids revealed by heteroduplex experiments: RP1, RP4, R68 and RK2 are identical.

The molecular relationships of the IncP1 plasmids RP1, RP4, R68 and RK2 were tested by electron microscopic examination of heteroduplexes. In several hybridization experiments molecules were detected which had a 7.8% portion of incomplete reannealing. This 'heterologous region' could be explained by the typical renaturation behaviour of the transposon Tn1. The identity of the Tn1 transposon present in RP1 and RP4 was proved by heteroduplex experiments with lambda phage DNA containing this transposon. These results indicated that the plasmids RP1 and RP4 are identical. Additional heteroduplex experiments between plasmids R68.45 and RP8 and between R68.45 and RK2 were performed. R68.45, a derivative of R68, has a small DNA insertion and RP8 can be regarded as a large insertion mutant of RP4; both insertions were used as single-stranded hybridization markers. From the hybrid molecules formed, it was deduced that R68 and RK2 are identical with RP1 and RP4 as far as molecular structure is revealed by the technique used.     

A mini-Tn5-derived transposon with reportable and selectable markers enables rapid generation and screening of insertional mutants in Gram-negative bacteria

We re-engineered a classic tool for mutagenesis and gene expression studies in Gram-negative bacteria. Our modified Tn5-based transposon contains multiple features that allow rapid selection for mutants, direct quantification of gene expression and straightforward cloning of the inactivated gene. The promoter-less gfp-km cassette provides selection and reporter assay depending on the activity of the promoter upstream of the transposon insertion site. The cat gene facilitates positive antibiotic selection for mutants, while the narrow R6Kγ replication origin forces transposition in recipient strains lacking the pir gene and enables cloning of the transposon flanked with the disrupted gene from the chromosome. The suicide vector pCKD100, a plasmid that could be delivered into recipient cells through biparental mating or electroporation, harbours the modified transposon. We used the transposon to mutagenize Pectobacterium versatile KD100, Pseudumonas coronafaciens PC27R and Escherichia coli 35150N. The fluorescence intensities of mutants expressing high GFP could be quantified and detected qualitatively. Transformation efficiency from conjugation ranged from 1600 to 1900 CFU per ml. We sequenced the upstream flanking regions, identified the putative truncated genes and demonstrated the restoration of the GFP phenotype through marker exchange. The mini-Tn5 transposon was also utilized to construct mutant a library of P. versatile for forward genetic screens.     

Genetic basis of non-transposition of Tn5 in Pseudomonas aeruginosa following mobilisation of RP4 Mob::Tn5 from Escherichia coli

Abstract A Tn 5 transposon mutagenesis system based on mobilization of the narrow-host-range plasmid pACYC184 from Escherichia coli by a chromosomally integrated promiscuous plasmid RP4 was found to be non-applicable to Pseudomonas aeruginosa recipients. Transposition following mobilization was based on cloning an RP4 DNA fragment (/ RP4 Mob) into pACYC184 and Tn 5 transposition into the fragment (/ RP4 Mob::Tn5). It was shown by DNA sub-cloning of RP4 Mob::Tn 5 on to a wide-host-range plasmid vector that mobilization was unaffected but that reduced survival of the vector or host following mobilization was responsible. However, mutagenesis was achieved by the provision of cloned RP4 Mob DNA in the P. aeruginosa recipients.     

Transposition of DNA fragments flanked by two inverted Tn1 sequences: translocation of the plasmid RP4::Tn1 region harboring the Tcr marker

We have demonstrated the possibility of transposition of the plasmid RP4::Tn1 fragment (21.2 kb) carrying the tetracycline resistance (Tcr) gene and flanked by two Tn1 copies. The new transposon, designated Tn1756, bears lethal genes that kill host cells. Therefore, its transposition can only be revealed in the presence of lethality-compensating helper regions of the plasmid RP4. Thus, RP4::Tn1 consists of two transposons, Tn1755 (Tn1-Kmr-Tn1) and Tn1756 (Tn1-Tcr-Tn1), sharing the Tn1 sequences. Both of these transposons are capable of recA-independent translocation to other plasmids. Therefore, transposition of DNA fragments flanked by two inverted Tn1 sequences does not depend on Tn1 orientation.