Novel chiral stationary phases based on 3,5-dimethyl phenylcarbamoylated β-cyclodextrin combining cinchona alkaloid moiety

Novel chiral selectors based on 3,5-dimethyl phenylcarbamoylated β-cyclodextrin connecting quinine (QN) or quinidine (QD) moiety were synthesized and immobilized on silica gel. Their chromatographic performances were investigated by comparing to the 3,5-dimethyl phenylcarbamoylated β-cyclodextrin (β-CD) chiral stationary phase (CSP) and 9-O-(tert-butylcarbamoyl)-QN-based CSP (QN-AX). Fmoc-protected amino acids, chiral drug cloprostenol (which has been successfully employed in veterinary medicine), and neutral chiral analytes were evaluated on CSPs, and the results showed that the novel CSPs characterized as both enantioseparation capabilities of CD-based CSP and QN/QD-based CSPs have broader application range than β-CD-based CSP or QN/QD-based CSPs. It was found that QN/QD moieties play a dominant role in the overall enantioseparation process of Fmoc-amino acids accompanied by the synergistic effect of β-CD moiety, which lead to the different enantioseparation of β-CD-QN-based CSP and β-CD-QD-based CSP. Furthermore, new CSPs retain extraordinary enantioseparation of cyclodextrin-based CSP for some neutral analytes on normal phase and even exhibit better enantioseparation than the corresponding β-CD-based CSP for certain samples.     

Enantiomeric separation of N‐protected amino acids by non‐aqueous capillary electrophoresis using quinine or Tert‐butyl carbamoylated quinine as chiral additive

A capillary electrophoretic (CE) method for the enantioseparation of N‐protected chiral amino acids was developed using quinine and tert‐butyl carbamoylated quinine as chiral selectors added to nonaqueous electrolyte solutions (NACE). A series of various N‐derivatized amino acids were tested as chiral selectands, and in order to optimize the CE enantioseparation of these compounds, different parameters were investigated: the nature of the organic solvent, the combination of different solvents, the nature and the concentration of the background electrolyte, the selector concentration, the capillary temperature, and the applied voltage. The influence of these factors on the separation of the analyte enantiomers and the electroosmotic flow was studied. Generally, with tert‐butyl carbamoylated quinine as chiral selector, better enantioseparations were achieved than with unmodified quinine. Optimum experimental conditions were found with a buffer made of 12.5 mM ammonia, 100 mM octanoic acid, and 10 mM tert‐butyl carbamoylated quinine in an ethanol–methanol mixture (60:40 v/v). Under these conditions, DNB‐Leu enantiomers could be separated with a selectivity factor (α) of 1.572 and a resolution (Rs) of 64.3; a plate number (N) of 127,000 and an asymmetry factor (As) of 0.93 were obtained for the first migrating enantiomer. Chirality 11:622–630, 1999. © 1999 Wiley‐Liss, Inc.     

Synthesis of dendrimer‐type chiral stationary phases based on the selector of (1S,2R)‐(+)‐2‐Amino‐1,2‐diphenylethanol derivate and their enantioseparation evaluation by HPLC

In our recent work, a series of dendritic chiral stationary phases (CSPs) were synthesized, in which the chiral selector was L‐2‐(p‐toluenesulfonamido)‐3‐phenylpropionyl chloride (selector I), and the CSP derived from three‐generation dendrimer showed the best separation ability. To further investigate the influence of the structures of dendrimer and chiral selector on enantioseparation ability, in this work, another series CSPs ( CSPs 1‐4 ) were prepared by immobilizing (1S,2R)‐1,2‐diphenyl‐2‐(3‐phenylureido)ethyl 4‐isocyanatophenylcarbamate (selector II) on one‐ to four‐generation dendrimers that were prepared in previous work. CSPs 1 and 4 demonstrated the equivalent enantioseparation ability. CSPs 2 and 3 showed the best and poorest enantioseparation ability respectively. Basically, these two series of CSPs exhibited the equivalent enantioseparation ability although the chiral selectors were different. Considering the enantioseparation ability of the CSP derived from aminated silica gel and selector II is much better than that of the one derived from aminated silica gel and selector I, it is believed that the dendrimer conformation essentially impacts enantioseparation. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Preparation and enantioseparation of a mixed selector chiral stationary phase derived from benzoylated tartaric acid and 1,2‐diphenylethylenediamine

L ‐Dibenzoyl tartaric acid was mono‐esterified with benzyl alcohol, and then chlorinated with SOCl₂ to give (2S,3S)‐1‐(benzyloxy)‐4‐chloro‐1,4‐dioxobutane‐2,3‐diyl dibenzoate (Selector 1 ). (1R,2R)‐1,2‐Diphenylethylenediamine was mono‐functionalized with phenyl isocyanate and phenylene diisocyanate in sequence to give (1R,2R)‐1,2‐diphenyl‐2‐(3‐phenylureido)ethyl 4‐ isocyanatophenylurea (Selector 2 ). Two brush‐type chiral stationary phases (CSPs) of single selector were prepared by separately immobilizing selectors 1 and 2 on aminated silica gel. Selectors 1 and 2 were simultaneously immobilized on aminated silica gel to give a mixed selector CSP. The enantioseparation ability of these CSPs was studied. The CSP of selector 1 has strongest separation ability, while the enantioseparation ability of the mixed selector CSP is relatively lower. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Enantioseparation on Riboflavin Derivatives Chemically Bonded to Silica Gel as Chiral Stationary Phases for HPLC

Acetylated and/or 3,5‐dimethylphenylcarbamated riboflavins were prepared and the resulting riboflavin derivatives as well as natural riboflavin were regioselectively immobilized on silica gel through chemical bonding at the 5’‐O‐ or 3‐N‐position of the riboflavin to develop novel chiral stationary phases (CSPs) for enantioseparation by high‐performance liquid chromatography (HPLC). The chiral recognition abilities of the obtained CSPs were significantly dependent on the structures of the riboflavin derivatives, the position of the chemical bonding on the silica gel, and the structures of the racemic compounds. The CSPs bonded at the 5’‐O‐position on the silica gel tended to well separate helicene derivatives, while the CSPs bonded at the 3‐N‐position composed of acetylated and 3,5‐dimethylphenylcarbamated riboflavins showed a better resolving ability toward helicene derivatives and bulky aromatic racemic alcohols, respectively, and some of them were completely separated into the enantiomers. The observed difference in the chiral recognition abilities of these riboflavin‐based CSPs is discussed based on the difference in their structures, including the substituents of riboflavin and the positions immobilized on the silica gel. Chirality 27:507–517, 2015. © 2015 Wiley Periodicals, Inc.     

New chiral stationary phases based on (R)‐1‐naphthylethylamine bound to 2,4,5,6‐tetrachloro‐1,3‐dicyanobenzene

Chiral functionalization of 2,4,5,6‐tetrachloro‐1,3‐dicyanobenzene (1) by regioselective nucleophilic substitution of one or two chlorine atoms by optically pure (R)‐(+)‐1‐naphthylethylamine (NEA), or by a glycine unit as a spacer to (R)‐NEA, enables the preparation of brush‐type chiral selectors (2, 3, 9, 13). By the introduction of the 3‐aminopropyltriethoxysilyl (APTES) group, reactive intermediates 4a/b, 5, 10a/b, and 14a/b are obtained ( a/b indicate a mixture of regioisomers with APTES in 6‐ and 2‐position). Binding of these to silica gel afforded four novel chiral stationary phases (CSPs) 6, 7, 15, and 16. HPLC columns containing CSPs with (R)‐NEA directly linked to polysubstituted aromatic ring (6, 7) are not very effective in resolution of most of the 23 racemic analytes, whereas the columns with distant π‐basic subunits (15, 16) exhibited higher resolving efficacy, in particular towards the isopropyl esters of racemic N‐3,5‐dinitrobenzoyl‐α‐amino acids. Effective resolution of test racemates reveals the importance of the presence of the hydrogen bond donor amido group and the distance between the persubstituted benzene ring in 1 and the π‐basic naphthalene ring of (R)‐NEA. Chirality 11:722–730, 1999. © 1999 Wiley‐Liss, Inc.     

Comparative HPLC Enantioseparation of Thirty‐Six Aromatic Compounds on Four Columns of the Lux® Series: Impact of Substituents,Shapes and Electronic Properties

With the aim to define a combined computational/chromatographic empirical approach useful for the high‐performance liquid chromatography (HPLC) method development of new chiral compounds, 36 racemic aromatic compounds with different chemical structures were used as test probes on four polysaccharide‐based chiral stationary phases (CSPs) of the Lux series, namely Lux Cellulose‐1, Lux Cellulose‐2, Lux Cellulose‐4, and Lux Amylose‐2, using classical n‐hexane/2‐propanol mixtures as mobile phase. Electrostatic potential surfaces (EPSs) determined using Density Functional Theory (DFT) calculations were used to derive size, shape, and electronic properties of each analyte. Then a comparative HPLC screening was carried out in order to evaluate the impact of substituents, shapes, and electronic properties of the analytes on the chromatographic behavior as the column changes. The four CSPs showed good complementary recognition ability. The elution sequence was determined in 30 cases out of 36. The success rate to afford baseline separations (R_s ≥ 1.5) was estimated: 29 compounds out of 36 showed baseline enantioseparation on at least one of the four selected CSPs. The combined computational‐chromatographic screening furnished useful collective structure‐chromatographic behavior relationships and a map of the chiral discrimination abilities of the considered CSPs towards the analytes. On this basis, the chromatographic behavior of new analytes on a set of polysaccharide‐based CSPs can be mapped through the qualitative correlation of chromatographic parameters (k, α, R_s) to computed molecular properties of the analytes. Chirality 25:709–718, 2013. © 2013 Wiley Periodicals, Inc.     

Synthesis and Application of C2 and C3 Symmetric (R)‐Phenylglycinol‐Derived Chiral Stationary Phases

A C3 symmetric (R)‐phenylglycinol N‐1,3,5‐benzenetricarboxylic acid‐derived chiral stationary phase (CSP) and three C2 symmetric (R)‐phenylglycinol CSPs were newly synthesized using o‐, m‐, and p‐phthaloyl dichlorides. © 2016 Wiley Periodicals, Inc. These CSPs were used to compare the resolution of 25 chiral samples using a previously reported 3,5‐dinitrobenzoyl (R)‐phenylglycinol‐derived CSP. Even though all CSPs have the same chiral moiety, the C3 symmetric CSP showed the best resolution. Chirality 28:186–191, 2016.© 2016 Wiley Periodicals, Inc.     

New chiral stationary phases for liquid chromatography based on small molecules: Development,enantioresolution evaluation and chiral recognition mechanisms

Recently, we reported the development of new chiral stationary phases (CSPs) for liquid chromatography (LC) based on chiral derivatives of xanthones (CDXs). Based on the most promising CDX selectors, 12 new CSPs were successfully prepared starting from suitable functionalized small molecules including xanthone and benzophenone derivatives. The chiral selectors comprising one, two, three, or four chiral moieties were covalently bonded to a chromatographic support and further packed into LC stainless-steel columns (150 × 2.1 mm I.D.). The enantioselective performance of the new CSPs was evaluated by LC using different classes of chiral compounds. Specificity for enantioseparation of some CDXs was observed in the evaluation of the new CSPs. Besides, assessment of chiral recognition mechanisms was performed by computational studies using molecular docking approach, which are in accordance with the chromatographic parameters. X-Ray analysis was used to establish a chiral selector 3D structure.     

The comparison in enantioseparation ability of the chiral stationary phases with single and mixed selector--the selectors derived from two D-tartrates

(2S,3S)-2,3-Bis(3,5-dimethylphenylcarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid and (2S,3S)-2,3-bis(1-naphthalenecarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid were synthesized from D-tartaric acid. These two compounds were chlorinated to afford two chiral selectors for chiral stationary phases (CSPs). The selectors were separately immobilized on aminated silica gel to give two single selector CSPs; and were simultaneously immobilized to obtain a mixed selector CSP. Comparing to the single selector CSPs, the mixed selector CSP bears the enhanced enantioseparation ability, suggesting that the two selectors in the mixed selector CSP are consistent for chiral recognition in most mobile phase conditions.     

Separation of Ofloxacin and Its Six Related Substances Enantiomers by Chiral Ligand‐Exchange Chromatography

A chiral ligand‐exchange high‐performance liquid chromatography method was developed for the enantioseparation of ofloxacin and its six related substances termed impurities A, B, C, D, E, and F. The separation was performed on a conventional C₁₈ column. Different organic modifiers, copper salts, amino acids, the ratio of Cu²⁺ to amino acid, pH of aqueous phase, and column temperature were optimized. The optimal mobile phase conditions were methanol‐water systems consisting of 5 mmol/L copper sulfate and 10 mmol/L L‐isoleucine (L‐Ile). Under such conditions, good enantioseparation of ofloxacin and impurities A, C, E, and F could be observed with resolutions (R_S) of 3.54, 1.97, 3.21, 3.50, and 2.12, respectively. On the relationship between the thermodynamic parameters and structures of analytes, the mechanism of chiral recognition was investigated. It was concluded that ofloxacin and impurities A, C, E, and F were all enthalpically driven enantioseparation and that low column temperature was beneficial to enantioseparation. Furthermore, the structure–separation relationship of these analytes is also discussed. Chirality 27:843–849, 2015. © 2015 Wiley Periodicals, Inc.     

Effect of Basic and Acidic Additives on the Separation of Some Basic Drug Enantiomers on Polysaccharide‐Based Chiral Columns With Acetonitrile as Mobile Phase

The separation of enantiomers of 16 basic drugs was studied using polysaccharide‐based chiral selectors and acetonitrile as mobile phase with emphasis on the role of basic and acidic additives on the separation and elution order of enantiomers. Out of the studied chiral selectors, amylose phenylcarbamate‐based ones more often showed a chiral recognition ability compared to cellulose phenylcarbamate derivatives. An interesting effect was observed with formic acid as additive on enantiomer resolution and enantiomer elution order for some basic drugs. Thus, for instance, the enantioseparation of several β‐blockers (atenolol, sotalol, toliprolol) improved not only by the addition of a more conventional basic additive to the mobile phase, but also by the addition of an acidic additive. Moreover, an opposite elution order of enantiomers was observed depending on the nature of the additive (basic or acidic) in the mobile phase. Chirality 27:228–234, 2015. © 2015 Wiley Periodicals, Inc.     

Resolution of Enantiomers of Novel C2‐Symmetric Aminobisphosphinic Acids via Diastereomeric Salt Formation With Quinine

C₂‐symmetric N,N‐bis(phosphinomethyl)amines were prepared by the thermal reaction of aromatic aldehydes with ammonia and hypophosphorus acid as previously described. Both enantiomers of C₂‐symmetric N,N‐bis(phosphinomethyl)amine were obtained in a high enantiomeric purity through the diastereomeric salt formation with (–)‐quinine, and subsequent fractional crystallization. X‐ray crystallographic analysis of one of the diastereomeric salts clearly revealed that (–)‐quinine could be an efficient resolving agent for obtaining the single enantiomer (R,R)‐N,N‐bis(phosphinomethyl)amine. Chirality 27:71–74, 2015. © 2014 Wiley Periodicals, Inc.     

Preparation and evaluation of regioselectively substituted amylose derivatives for chiral separations

Six novel regioselectively substituted amylose derivatives with a benzoate at 2‐position and two different phenylcarbamates at 3‐ and 6‐positions were synthesized and their structures were characterized by ¹H nuclear magnetic resonance (NMR) spectroscopy. Their enantioseparation abilities were then examined as chiral stationary phases (CSPs) for high‐performance liquid chromatography (HPLC) after they were coated on 3‐aminopropyl silica gels. Investigations indicated that the substituents at the 3‐ and 6‐positions played an important role in chiral recognition of these amylose 2‐benzoate serial derivatives. The derivatives demonstrated characteristic enantioseparation and some racemates were better resolved on these derivatives than on Chiralpak AD, which is one of the most efficient CSPs, utilizing coated amylose tris(3,5‐dimethylphenylcarbamate) as the chiral selector. Among the derivatives prepared, amylose 2‐benzoate‐3‐(phenylcarbamate/4‐methylphenylcarbamate)‐6‐(3,5‐dimethylphenylcarbamate) exhibited chiral recognition abilities comparable to that of Chiralpak AD and may be useful CSPs in the future. The effect of mobile phase on chiral recognition was also studied. In general, with the decreased concentration of 2‐propanol, better resolutions were obtained with longer retention times. Moreover, when ethanol was used instead of 2‐propanol, poorer resolutions were often achieved. However, in some cases, improved enantioselectivity was achieved with ethanol rather than 2‐propanol as the mobile phase modifier.     

Combining the enantioselectivity of a cyclodextrin and a diamide selector in a mixed binary gas‐chromatographic chiral stationary phase

The present work reports on the investigation of a mixed binary chiral stationary phase (CSP) prepared by simultaneous attachment of permethylated‐β‐cyclodextrin ( D selector) and resorcinarene with pendant l ‐ or d ‐valine diamide groups ( L′ and D′ selectors, respectively) to a polysiloxane matrix via platinum‐catalyzed hydrosilylation. The gas‐chromatographic investigation of a number of racemates on the four different CSPs ( D, D′, DD′, and DL′ ) showed that the enantioselectivity of the individual chiral selectors was retained in the mixed binary CSPs. As a consequence, hydrocarbons, underivatized alcohols, ketones, and almost all proteinogenic amino acid derivatives could be separated simultaneously on each of the mixed CSPs. Matched and mismatched cases of enantioseparation on the mixed binary CSPs were observed but turned out to be of minor importance for enantiomeric separation. In general, more racemates were separated with α ≥ 1.02 on the mixed phases as compared to the single phases. In order to analyze the influence of the presence of the diamide selector on the enantioselectivity of the cyclodextrin selector, a mixed ternary CSP containing the selector D and a racemic mixture of the selectors D′ and L′ [ D ( D′L′ )] was prepared and investigated. Merits and limitations of the approach of mixed binary CSPs are discussed. © 2005 Wiley‐Liss, Inc. Chirality     

Separation of Selected Imidazole Enantiomers Using Dual Cyclodextrin System in Micellar Electrokinetic Chromatography

Cyclodextrin‐modified micellar electrokinetic chromatography (CD‐MEKC) method was developed for simultaneous enantioseparation of three imidazole drugs namely tioconazole, isoconazole and fenticonazole. Three easily available and inexpensive cyclodextrins namely 2‐hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), 2‐hydroxypropyl‐γ‐cyclodextrin (HP‐γ‐CD) and heptakis(2,6‐di‐O‐methyl)‐β‐cyclodextrin (DM‐β‐CD) were evaluated to discriminate the six stereoisomers of the drugs. However, none of the three CDs gave a complete enantioseparation of the drugs. Effective enantioseparation of tioconazole, isoconazole and fenticonazole was achieved using a combination of 35 mM HP‐γ‐CD and 10 mM DM‐β‐CD as chiral selectors. The best separation using both HP‐γ‐CD and DM‐β‐CD (35 mM:10 mM) as chiral selectors were accomplished in background electrolyte (BGE) containing 35 mM phosphate buffer (pH 7.0), 50 mM sodium dodecyl sulfate (SDS) and 15% (v/v) acetonitrile at 27 kV and 30 °C with all peaks resolved in less than 15 min with resolutions, R_s 1.90‐27.22 and peak efficiencies, N > 180 000. The developed method was linear over the concentration range of 25–200 mg l^‐1 (r² > 0.998) and the detection limits (S/N = 3) of the three imidazole drugs were found to be 2.7‐7.7 mg l^‐1. The CD‐MEKC method was successfully applied to the determination of the three imidazole drugs in spiked human urine sample and commercial cream formulation of tioconazole and isoconazole with good recovery (93.6‐106.2%) and good RSDs ranging from 2.30‐6.8%. Chirality 25:328–335, 2013. © 2013 Wiley Periodicals, Inc.     

Investigation of maltodextrin‐based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium‐L‐arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin‐based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris‐H₃PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium‐L‐arginine. In addition, the chiral configuration of tetramethylammonium‐L‐arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.     

Development of HPLC Chiral Stationary Phases Based on (+)‐(18‐Crown‐6)‐2,3,11,12‐tetracarboxylic Acid and Their Applications

Crown ether‐based chiral stationary phases (CSPs) have been known to be useful for the resolution of racemic primary amino compounds. In particular, CSPs based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid have been reported to be useful for the resolution of secondary amino compounds as well as primary amino compounds. In this article, the process of developing various CSPs based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid to improve the chiral recognition efficiency and/or the stability of the CSPs and their applications to the resolution of various primary and nonprimary amino compounds are reviewed. Chirality 27:576–588, 2015. © 2015 Wiley Periodicals, Inc.     

Use of Sulfated Cyclofructan 6 and Sulfated Cyclodextrins for the Chiral Separation of Four Basic Pharmaceuticals by Capillary Electrophoresis

Sulfated cyclofructan 6 (S‐CF6) and sulfated cyclodextrins (S‐α‐, β‐, γ‐CDs) are highly selective chiral selectors for the enantioseparation of basic solutes. In this study, S‐CF6 was introduced for the enantiomeric separation of four basic pharmaceuticals (including tamsulosin, tiropramide, bupivacaine, and norephedrine) by capillary electrophoresis (CE), and the enantiomeric separation performance was compared with S‐α‐, β‐, γ‐CDs. The effects of the chiral selector type, chiral selector concentration, operating voltage, and column temperature were examined and optimized. Excellent resolutions were obtained for all solutes on these chiral selectors. Chirality 25:735–742, 2013. © 2013 Wiley Periodicals, Inc.     

Synthesis of new C3 symmetric amino acid‐ and aminoalcohol‐containing chiral stationary phases and application to HPLC enantioseparations

We recently reported a new C3‐symmetric (R)‐phenylglycinol N‐1,3,5‐benzenetricarboxylic acid‐derived chiral high‐performance liquid chromatography (HPLC) stationary phase (CSP 1) that demonstrated better results as compared to a previously described N‐3,5‐dintrobenzoyl (DNB) (R)‐phenylglycinol‐derived CSP. Over a decade ago, (S)‐leucinol, (R)‐phenylglycine, and (S)‐leucine derivatives were used as the starting materials of 3,5‐DNB‐based Pirkle‐type CSPs for chiral separation. In this study, three new C3‐symmetric CSPs (CSP 2, 3, and 4) were prepared by combining the ideas and results mentioned above. Here we describe the synthetic procedures and applications of the new C3‐symmetric CSPs (CSP 2–CSP 4).