Does extraction of DNA and RNA by magnetic fishing work for diverse plant species?

An automated nucleic acid extraction procedure with magnetic particles originally designed for isolation of deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) from animal tissues was tested for plant material. We isolated genomic DNA and total RNA from taxonomically diverse plant species representing conifers (Scots pine), broad-leaved trees (silver birch and hybrid aspen), dwarf shrubs (bilberry), and both monocotyledonous (regal lily) and dicotyledonous (Saint John's wort, round-leaved sundew, and tobacco) herbaceous plants. Buffers developed for DNA extraction were successfully used in addition to manufacturer's extraction kits. The quality of RNA was appropriate for many applications, but the quality of DNA was not always sufficient for polymerase chain reaction (PCR) amplification. However, we could strikingly improve the quality by eliminating the adherent compounds during the extraction or later in the PCR phase. Our results show that the use of the procedure could be extended to diverse plant species. This procedure is especially suitable for small sample sizes and for simultaneous processing of many samples enabling large-scale plant applications in population genetics, or in the screening of putative transgenic plants.     

Comparing DNA Extraction Methods for Analysis of Botanical Materials Found in Anti-Diabetic Supplements

A comparative performance evaluation of DNA extraction methods from anti-diabetic botanical supplements using various commercial kits was conducted, to determine which produces the best quality DNA suitable for PCR amplification, sequencing and species identification. All plant materials involved were of suboptimal quality showing various levels of degradation and therefore representing real conditions for testing herbal supplements. Eight different DNA extraction methods were used to isolate genomic DNA from 13 medicinal plant products. Two methods for evaluation, DNA concentration measurements that included absorbance ratios as well as PCR amplifiability, were used to determine quantity and quality of extracted DNA. We found that neither DNA concentrations nor commonly used UV absorbance ratio measurements at A ₂₆₀/A ₂₈₀ between 1.7 and 1.9 are suitable for globally predicting PCR success in these plant samples, and that PCR amplifiablity itself was the best indicator of extracted product quality. However, our results suggest that A ₂₆₀/A ₂₈₀ ratios below about 1.3 and above 2.3 indicated a DNA quality too poor to amplify. Therefore, A ₂₆₀/A ₂₈₀ measurements are not useful to identify samples that likely will amplify but can be used to exclude samples that likely will not amplify reducing the cost for unnecessarily subjecting samples to PCR. The two Nucleospin^® plant II kit extraction methods produced the most pure and amplifiable genomic DNA extracts. Our results suggest that there are clear, discernable differences between extraction methods for low quality plant samples in terms of producing contamination-free, high-quality genomic DNA to be used for further analysis.     

Investigation of sensitivity,specificity and accuracy of Tetra primer ARMS PCR method in comparison with conventional ARMS PCR,based on sequencing technique outcomes in IVS-II-I genotyping of beta thalassemia patients

Purpose

Beta thalassemia is one of the most important hematic diseases all around the world and solving the problems caused by this abnormality is strongly dependent on precise detection and reliable screening of high-risk couples. The aim of our study was the investigation of sensitivity, specificity and accuracy of Tetra primer ARMS PCR method comparing with conventional ARMS PCR, based on sequencing technique outcomes for genotyping of IVS-II-I mutation in beta thalassemia patients.

Methods

Fifty seven samples including two homozygote, 49 heterozygote and 6 normal specimens were analyzed by Tetra primer ARMS PCR and conventional ARMS PCR methods. DNA was extracted by the standard method of salting out for leukocyte genomic DNA extraction of blood specimens and a high pure PCR template preparation kit was used for DNA purification of CVS samples. The results obtained by Tetra primer ARMS PCR and conventional ARMS PCR methods were compared with gold standard technique, i.e. sequencing.

Results

All three parameters including specificity, sensitivity and accuracy were 100% for Tetra primer ARMS PCR method, while they were 100%, 92.45% and 92.7% for conventional ARMS PCR technique respectively. Comparing with Tetra primer ARMS PCR which represented 100% agreement with sequencing method, conventional ARMS PCR technique only showed 47.1% agreement, because of 4 discordant results.

Conclusion

Tetra primer ARMS PCR method is an almost reliable, sensitive and accurate technique and it is suggested that it can be used as a complementary method for diagnostic cases instead of conventional ARMS PCR method. This suggestion originated with perfect rate of agreement between outcomes of sequencing method, as a gold standard method of detecting the mutations, and Tetra primer ARMS PCR technique comparing with conventional ARMS PCR method.     

Development of Procedures for Direct Extraction of Cryptosporidium DNA from Water Concentrates and for Relief of PCR Inhibitors

Extraction of high-quality DNA is a key step in PCR detection of Cryptosporidium and other pathogens in environmental samples. Currently, Cryptosporidium oocysts in water samples have to be purified from water concentrates before DNA is extracted. This study compared the effectiveness of six DNA extraction methods (DNA extraction with the QIAamp DNA minikit after oocyst purification with immunomagnetic separation and direct DNA extraction methods using the FastDNA SPIN kit for soil, QIAamp DNA stool minikit, UltraClean soil kit, or QIAamp DNA minikit and the traditional phenol-chloroform technique) for the detection of Cryptosporidium with oocyst-seeded samples, DNA-spiked samples, and field water samples. The study also evaluated the effects of different PCR facilitators (nonacetylated bovine serum albumin, the T4 gene 32 protein, and polyvinylpyrrolidone) and treatments (the use of GeneReleaser or ultrafiltration) for the relief from or removal of inhibitors of PCR amplification. The results of seeding and spiking studies showed that PCR inhibitors were presented in all DNA solutions extracted by the six methods. However, the effect of PCR inhibitors could be relieved significantly by the addition of 400 ng of bovine serum albumin/μl or 25 ng of T4 gene 32 protein/μl to the PCR mixture. With the inclusion of bovine serum albumin in the PCR mixture, DNA extracted with the FastDNA SPIN kit for soil without oocyst isolation resulted in PCR performance similar to that produced by the QIAamp DNA minikit after oocysts were purified by immunomagnetic separation.     

A high-throughput protocol for extracting high-purity genomic DNA from plants and animals

DNA extraction techniques that employ the reversible binding of DNA to silica via chaotropic salts can deliver high-quality genomic DNA from plant and animal tissues, while avoiding the use of toxic organic solvents. Existing techniques that use this method are either prohibitively expensive, or are applicable to only a restricted set of taxa. Here we describe a cost-effective DNA extraction technique suitable for a wide range of plant and animal taxa that yields microgram quantities of high-molecular-weight genomic DNA at a throughput of 192 samples per day. Our technique is particularly robust for tissue samples that are insoluble or are rapidly discoloured or oxidized in standard DNA extraction buffers. We demonstrate the quality of DNA extracted using this method by applying the amplified fragment length polymorphism technique to plant species.     

Comparison of Rapid DNA Extraction Methods Applied to PCR Identification of Medicinal Mushroom Ganoderma spp.

Abstract

Four different DNA extraction methods were used to extract genomic DNA of the medicinal mushroom Lingzhi from its developing stage materials, such as mycelium, dry fruiting body, or sliced and spore powder or sporoderm‐broken spore powder. The DNA samples were analyzed using agarose gel electrophoresis, UV spectrophotometer, and PCR amplification. According to the average yields and purity of DNA, high salt concentrations and low pH methods were the best for DNA extraction. The mycelia and sporoderm‐broken spore powder yielded higher and purer DNA. The method developed could effectively eliminate the influence of the secondary metabolites to DNA extraction. The DNA samples extracted from the developed method could be successfully used for PCR applications.     

A method for the medium-term storage of plant tissue samples at room temperature and successive cycles of DNA extraction

Based on the protocol originally described by Stein et al. (2001), we have developed a method that allows for medium-term conservation at room temperature of wheat (Triticum aestivum) tissue samples to use for DNA extraction. DNA quality was suitable for analysis by PCR and Southern hybridization, even after 2 months of storage at room temperature. This method allows successive DNA re-extractions from a previously extracted sample and maximization of the DNA yield that can be recovered from precious samples. This method has applications for conservation of leaf samples and management of DNA extraction. Our method can help improve data recovery in many plant molecular genetics research projects.     

Application of Wavelet Packet Transform to detect genetic polymorphisms by the analysis of inter-Alu PCR patterns

Background  

The analysis of Inter-Alu PCR patterns obtained from human genomic DNA samples is a promising technique for a simultaneous analysis of many genomic loci flanked by Alu repetitive sequences in order to detect the presence of genetic polymorphisms. Inter-Alu PCR products may be separated and analyzed by capillary electrophoresis using an automatic sequencer that generates a complex pattern of peaks. We propose an algorithmic method based on the Haar-Walsh Wavelet Packet Transformation (WPT) for an efficient detection of fingerprint-type patterns generated by PCR-based methodologies. We have tested our algorithmic approach on inter-Alu patterns obtained from the genomic DNA of three couples of monozygotic twins, expecting that the inter-Alu patterns of each twins couple will show differences due to unavoidable experimental variability. On the contrary the differences among samples of different twins are supposed to originate from genetic variability. Our goal is to automatically detect regions in the inter-Alu pattern likely associated to the presence of genetic polymorphisms.     

Ultra-High Efficient Colony PCR for High Throughput Screening of Bacterial Genes

Current colony PCR methods are not suitable for screening genes encoded in genomic DNA and are limited to E. coli host strains. Here, we describe an ultra-high efficient colony PCR method for high throughput screening of bacterial genes embedded in the genomic DNA of any bacterial species. This new technique expands colony PCR method to several hosts as well as offers a rapid, less expensive and reliable bacterial genomic DNA extraction.     

Comparison of rapid DNA extraction methods applied to PCR identification of medicinal mushroom Ganoderma spp

Four different DNA extraction methods were used to extract genomic DNA of the medicinal mushroom Lingzhi from its developing stage materials, such as mycelium, dry fruiting body, or sliced and spore powder or sporoderm-broken spore powder. The DNA samples were analyzed using agarose gel electrophoresis, UV spectrophotometer, and PCR amplification. According to the average yields and purity of DNA, high salt concentrations and low pH methods were the best for DNA extraction. The mycelia and sporoderm-broken spore powder yielded higher and purer DNA. The method developed could effectively eliminate the influence of the secondary metabolites to DNA extraction. The DNA samples extracted from the developed method could be successfully used for PCR applications.     

High-throughput DNA extraction method suitable for PCR

PCR has become one of the most popular techniques in functional genomics. Projects in both forward and reverse genetics routinely require PCR amplification of thousands of samples. Processing samples to extract DNA of sufficient purity for PCR is often a limiting step. We have developed a simple 96-well plate-based high-throughput DNA extraction method that is applicable to many plant species. The method involves a simple incubation of plant tissue samples in a DNA extraction buffer followed by a neutralization step. With the addition of a modified PCR buffer, the extracted DNA enabled the robust amplification of genomic fragments from samples of Arabidopsis, tobacco, sorghum, cotton, moss, and even pine needles. Several thousand DNA samples can be economically processed in a single day by one person without the use of robotics. This procedure will facilitate many technologies including high-throughput genotyping, map-based cloning, and identification of T-DNA or transposon-tagged mutants for known gene sequences.     

Development of procedures for direct extraction of Cryptosporidium DNA from water concentrates and for relief of PCR inhibitors

Extraction of high-quality DNA is a key step in PCR detection of Cryptosporidium and other pathogens in environmental samples. Currently, Cryptosporidium oocysts in water samples have to be purified from water concentrates before DNA is extracted. This study compared the effectiveness of six DNA extraction methods (DNA extraction with the QIAamp DNA minikit after oocyst purification with immunomagnetic separation and direct DNA extraction methods using the FastDNA SPIN kit for soil, QIAamp DNA stool minikit, UltraClean soil kit, or QIAamp DNA minikit and the traditional phenol-chloroform technique) for the detection of Cryptosporidium with oocyst-seeded samples, DNA-spiked samples, and field water samples. The study also evaluated the effects of different PCR facilitators (nonacetylated bovine serum albumin, the T4 gene 32 protein, and polyvinylpyrrolidone) and treatments (the use of GeneReleaser or ultrafiltration) for the relief from or removal of inhibitors of PCR amplification. The results of seeding and spiking studies showed that PCR inhibitors were presented in all DNA solutions extracted by the six methods. However, the effect of PCR inhibitors could be relieved significantly by the addition of 400 ng of bovine serum albumin/mul or 25 ng of T4 gene 32 protein/mul to the PCR mixture. With the inclusion of bovine serum albumin in the PCR mixture, DNA extracted with the FastDNA SPIN kit for soil without oocyst isolation resulted in PCR performance similar to that produced by the QIAamp DNA minikit after oocysts were purified by immunomagnetic separation.     

A simple method for DNA extraction from marine bacteria that produce extracellular materials

We present a simple method for extracting DNA from the marine bacteria Hahella chejuensis, a Streptomyces sp., and a Cytophaga sp. Previously, DNA purification from these strains was hindered by the presence of extracellular materials. In our extraction method, the marine bacteria are lysed by freezing and grinding in liquid nitrogen, and treated with SDS. The extracted DNA is purified using a phenol/chloroform mixture, and precipitated in isopropanol. The extracted DNA is of high quality and suitable for molecular analyses, such as PCR, restriction enzyme digestion, genomic DNA blot hybridization, and genomic DNA library construction. We used this method to extract genomic DNA from several other marine bacteria. Our method is a reproducible, simple, and rapid technique for routine DNA extractions from marine bacteria. Furthermore, the low cost of this method makes it attractive for large-scale studies.     

Extraction of genomic DNA from yeasts for PCR-based applications

We have developed a quick and low-cost genomic DNA extraction protocol from yeast cells for PCR-based applications. This method does not require any enzymes, hazardous chemicals, or extreme temperatures, and is especially powerful for simultaneous analysis of a large number of samples. DNA can be efficiently extracted from different yeast species (Kluyveromyces lactis, Hansenula polymorpha, Schizosaccharomyces pombe, Candida albicans, Pichia pastoris, and Saccharomyces cerevisiae). The protocol involves lysis of yeast colonies or cells from liquid culture in a lithium acetate (LiOAc)-SDS solution and subsequent precipitation of DNA with ethanol. Approximately 100 nanograms of total genomic DNA can be extracted from 1 × 10(7) cells. DNA extracted by this method is suitable for a variety of PCR-based applications (including colony PCR, real-time qPCR, and DNA sequencing) for amplification of DNA fragments of ≤ 3500 bp.     

An improved protocol and a new grinding device for extraction of genomic DNA from microorganisms by a two-step extraction procedure

Current protocols to extract genomic DNA from microorganisms are still laborious, tedious and costly, especially for the species with thick cell walls. In order to improve the effectiveness of extracting DNA from microbial samples, a novel protocol, defined as two-step extraction method, along with an improved tissue-grinding device, was developed. The protocol included two steps, disruption of microbial cells or spores by grinding the sample together with silica sand in a new device and extraction of DNA with an effective buffer containing cell lysis chemicals. The device was prepared by using a commercial electric mini-grinder, adapted with a grinding stone, and a sample cup processed by lathing from a polytetrafluoroethylene rod. We tested the method with vegetative cells of four microbial species and two microbial spores that have thick cell walls and are therefore hard to process; these included Escherichia coli JM109, Bacillus subtilis WB600, Sacchromyces cerevisiae INVSc1, Trichoderma viride AS3.3711, and the spores of S. cerevisiae and T. viride, respectively, representing Gram-positive bacteria, Gram-negative bacteria, yeast, filamentous fungi. We found that this new method and device extracted usable quantities of genomic DNA from the samples. The DNA fragments that were extracted exceeded 23 kb. The target sequences up to about 5 kb were successfully and exclusively amplified by PCR using extracted DNA as the template. In addition, the DNA extraction was finalized within 1.5 h. Thus, we conclude that this two-step extraction method is an effective and improved protocol for extraction of genomic DNA from microbial samples.     

DNA sexing of Nipponia nippon by duplex polymerase chain reaction

The aim of this study was to develop a rapid, simple, sensitive, and accurate duplex polymerase chain reaction (PCR) to sex Nipponia nippon, a monomorphic bird. Amplification by duplex PCR of a sex-related gene on the female chromosome and the 12S rRNA gene yielded good results using genomic DNA extracted from a feather follicle or the membranes of eggshell samples. To simplify the DNA extraction procedure, a simple boiling method was used. Our simple boiling DNA extraction method produced similar PCR amplification results as when using DNA extracted using TRIzol. Sex determination in the endangered Nipponia nippon is of crucial value to breeding programs. The duplex PCR protocol that we developed provides a simple sex identification method that is based on amplification of a sex-related gene, and we anticipate that it will facilitate effective conservation and management of Nipponia nippon.     

High throughput preparation of fly genomic DNA in 96-well format using a paint-shaker

Sample homogenization is an essential step for genomic DNA extraction, with multiple downstream applications in Molecular Biology. Genotyping hundreds or thousands of samples requires an automation of this homogenization step, and high throughput homogenizer equipment currently costs 7000 euros or more. We present an apparatus for homogenization of individual Drosophila adult flies in 96-well micro-titer dishes, which was built from a small portable paint-shaker (F5 portable paint-shaker, Ushake). Single flies are disrupted in each well that contains extraction buffer and a 4-mm metal ball. Our apparatus can hold up to five 96-well micro-titer plates. Construction of the homogenizer apparatus takes about 3–4 days, and all equipment can be obtained from a home improvement store. The total material cost is approximately 700 euros including the paint-shaker. We tested the performance of our apparatus using the ZR-96 Quick-gDNA? kit (Zymo Research) homogenization buffer and achieved nearly complete tissue homogenization after 15 minutes of shaking. PCR tests did not detect any cross contamination between samples of neighboring wells. We obtained on average 138 ng of genomic DNA per fly, and DNA quality was adequate for standard PCR applications. In principle, our tissue homogenizer can be used for isolation of DNA suitable for library production and high throughput genotyping by Multiplexed Shotgun Genotyping (MSG), as well as RNA isolation from single flies. The sample adapter can also hold and shake other items, such as centrifuge tubes (15–50 mL) or small bottles.     

Quantification of the slug parasitic nematode Phasmarhabditis hermaphrodita from soil samples using real time qPCR

Phasmarhabditis hermaphrodita is a nematode parasite that infects and kills several species of slugs. The nematode is produced commercially as a biological control agent for slug pests of agriculture and horticulture. Given the difficulties of distinguishing this species from other nematode species in soil samples, very little is known about its natural ecology or its behaviour and persistence following application for biological control. Here we describe a method to quantify P. hermaphrodita in soil samples based on real time PCR. We designed primers and a dual labelled fluorescent probe that can be used to quantify numbers of P. hermaphrodita and which is capable of distinguishing this species from the morphologically identical Phasmarhabditis neopapillosa. We compared different methods whereby the entire nematode community is extracted prior to DNA extraction, and three methods to extract DNA directly from soil samples. Both nematode extraction and DNA extraction from large (10 g) samples of soil gave reliable estimates of nematode numbers, but methods which extracted DNA from small (1 g or less) soil samples substantially underestimated numbers. However, direct extraction of DNA from soils may overestimate numbers of live nematodes as DNA from dead nematodes was found to persist in soil for at least 6 days. The technique could be modified for detection and quantification of all soil borne parasitic nematodes.     

Immunomagnetic separation of Cryptosporidium parvum oocysts using MACS MicroBeads and high gradient separation columns

We evaluated the MACS immunomagnetic separation (IMS) system for concentrating Cryptosporidium parvum. Oocysts were first labeled with fluorescein isothiocyanate (FITC) or rabbit anti-C. parvum antibodies, then linked to MicroBeads coated with anti-FITC or anti-rabbit IgG, and separated through a high gradient separation column. Results indicated that over 95% of oocysts were recovered and their fluorescence and infectivity were retained. The presence of MicroBeads showed no effect on genomic DNA extraction and subsequent polymerase chain reaction (PCR)-based analyses, as sensitivity of PCR (10 oocysts) and the band pattern of randomly amplified polymorphic DNA (RAPD) were identical to those using DNAs extracted from normally purified oocysts. IMS-PCR consistently detected as few as 10 oocysts from 100 ml of apple juice or homogenized milk and IMS-IFA could detect 100 oocysts from 1 g of deer manure, demonstrating the efficiency of IMS in recovering oocysts from environmental and food samples. Our results suggest that the MACS IMS system could be used for multiple applications in Cryptosporidium research.     

Technical note: PCR analysis of minimum target amount of ancient DNA

The study of ancient DNA plays an important role in archaeological and palaeontological research as well as in pathology and forensics. Here, we present a new tool for ancient DNA analysis, which overcomes contamination problems, DNA degradation, and the negative effects of PCR inhibitors while reducing the amount of starting target material in the picogram range. Ancient bone samples from four Egyptian mummies were examined by combining laser microdissection, conventional DNA extraction, and low‐volume PCR. Initially, several bone particles (osteons) in the micrometer range were extracted by laser microdissection. Subsequently, ancient DNA amplification was performed to verify our extraction method. Amelogenin and β‐actin gene specific fragments were amplified via low‐volume PCR in a total reaction volume of 1 μl. Results of microdissected mummy DNA samples were compared to mummy DNA, which was extracted using a standard DNA extraction method based on pulverization of bone material. Our results highlight the combination of laser microdissection and low‐volume PCR as a promising new technique in ancient DNA analysis. Am J Phys Anthropol, 2010. © 2010 Wiley‐Liss, Inc.