Nonlocal structural perturbations in a mutant human insulin: sequential resonance assignment and 13C-isotope-aided 2D-NMR studies of [PheB24-->Gly]insulin with implications for receptor recognition.

Insulin's mechanism of receptor binding is not well understood despite extensive study by mutagenesis and X-ray crystallography. Of particular interest are "anomalous" analogues whose bioactivities are not readily rationalized by crystal structures. Here the structure and dynamics of one such analogue (GlyB24-insulin) are investigated by circular dichroism (CD) and isotope-aided 2D-NMR spectroscopy. The mutant insulin retains near-native receptor-binding affinity despite a nonconservative substitution (PheB24-->Gly) in the receptor-binding surface. Relative to native insulin, GlyB24-insulin exhibits reduced dimerization; the monomer (the active species) exhibits partial loss of ordered structure, as indicated by CD studies and motional narrowing of selected 1H-NMR resonance. 2D-NMR studies demonstrate that the B-chain beta-turn (residues B20-23) and beta-strand (residues B24-B28) are destabilized; essentially native alpha-helical secondary structure (residues A3-A8, A13-A18, and B9-B19) is otherwise maintained. 13C-Isotope-edited NOESY studies demonstrate that long-range contacts observed between the B-chain beta-strand and the alpha-helical core in native insulin are absent in the mutant. Implications for the mechanism of insulin's interaction with its receptor are discussed.     

Replacement of the interchain disulfide bridge-forming amino acids A7 and B7 by glutamate impairs the structure and activity of insulin

Insulin contains three disulfide bonds, one intrachain bond, A6-A11, and two interchain bonds, A7-B7 and A20-B19. Site-directed mutagenesis results (the two cysteine residues of disulfide A7-B7 were replaced by serine) showed that disulfide A7-B7 is crucial to both the structure and activity of insulin. However, chemical modification results showed that the insulin analogs still retained relatively high biological activity when A7Cys and B7Cys were modified by chemical groups with a negative charge. Did the negative charge of the modification groups restore the loss of activity and/or the disturbance of structure of these insulin analogs caused by deletion of disulfide A7-B7? To answer this question, an insulin analog with both A7Cys and B7Cys replaced by Glu, which has a long side-chain and a negative charge, was prepared by protein engineering, and its structure and activity were analyzed. Both the structure and activity of the present analog are very similar to that of the mutant with disulfide A7-B7 replaced by Ser, but significantly different from that of wild-type insulin. The present results suggest that removal of disulfide A7-B7 will result in serious loss of biological activity and the native conformation of insulin, even if the disulfide is replaced by residues with a negative charge.     

Role of disulfide bonds in the structure and activity of human insulin

Insulin contains two inter-chain disulfide bonds between the A and B chains (A7-B7 and A20-B19), and one intra-chain linkage in the A chain (A6-A11). To investigate the role of each disulfide bond in the structure, function and stability of the molecule, three des mutants of human insulin, each lacking one of the three disulfide bonds, were prepared by enzymatic conversion of refolded mini-proinsulins. Structural and biological studies of the three des mutants revealed that all three disulfide bonds are essential for the receptor binding activity of insulin, whereas the different disulfide bonds make different contributions to the overall structure of insulin. Deletion of the A20-B19 disulfide bond had the most substantial influence on the structure as indicated by loss of ordered secondary structure, increased susceptibility to proteolysis, and markedly reduced compactness. Deletion of the A6-A11 disulfide bond caused the least perturbation to the structure. In addition, different refolding efficiencies between the three des mutants suggest that the disulfide bonds are formed sequentially in the order A20-B19, A7-B7 and A6-A11 in the folding pathway of proinsulin.     

A protein caught in a kinetic trap: structures and stabilities of insulin disulfide isomers

Proinsulin contains six cysteines whose specific pairing (A6-A11, A7-B7, and A20-B19) is a defining feature of the insulin fold. Pairing information is contained within A and B domains as demonstrated by studies of insulin chain recombination. Two insulin isomers containing non-native disulfide bridges ([A7-A11,A6-B7,A20-B19] and [A6-A7,A11-B7,A20-B19]), previously prepared by directed chemical synthesis, are metastable and biologically active. Remarkably, the same two isomers are preferentially formed from native insulin or proinsulin following disulfide reassortment in guanidine hydrochloride. The absence of other disulfide isomers suggests that the observed species exhibit greater relative stability and/or kinetic accessibility. The structure of the first isomer ([A7-A11,A6-B7,A20-B19], insulin-swap) has been described [Hua, Q. X., Gozani, S. N., Chance, R. E., Hoffmann, J. A., Frank, B. H., and Weiss, M. A. (1995) Nat. Struct. Biol. 2, 129-138]. Here, we demonstrate that the second isomer (insulin-swap2) is less ordered than the first. Nativelike elements of structure are retained in the B chain, whereas the A chain is largely disordered. Thermodynamic studies of guanidine denaturation demonstrate the instability of the isomers relative to native insulin (DeltaDeltaG(u) > 3 kcal/mol). In contrast, insulin-like growth factor I (IGF-I) and the corresponding isomer IGF-swap, formed as alternative products of a bifurcating folding pathway, exhibit similar cooperative unfolding transitions. The insulin isomers are similar in structure and stability to two-disulfide analogues whose partial folds provide models of oxidative folding intermediates. Each exhibits a nativelike B chain and less-ordered A chain. This general asymmetry is consistent with a hierarchical disulfide pathway in which nascent structure in the B chain provides a template for folding of the A chain. Structures of metastable disulfide isomers provide probes of the topography of an energy landscape.     

Crystal structure of destripeptide (B28-B30) insulin: implications for insulin dissociation

Destripeptide (B28-B30) insulin (DTRI) is an insulin analogue that has much weaker association ability than native insulin but keeps most of its biological activity. It can be crystallized from a solution containing zinc ions at near-neutral pH. Its crystal structure has been determined by molecular replacement and refined at 1.9 A resolution. DTRI in the crystal exists as a loose hexamer compared with 2Zn insulin. The hexamer only contains one zinc ion that coordinates to the B10 His residues of three monomers. Although residues B28-B30 are located in the monomer-monomer interface within a dimer, the removal of them can simultaneously weaken both the interactions between monomers within the dimer and the interactions between dimers. Because the B-chain C-terminus of insulin is very flexible, we take the DTRI hexamer as a transition state in the native insulin dissociation process and suggest a possible dissociation process of the insulin hexamer based on the DTRI structure.     

Structure of hen egg-white lysozyme solvated in TFE/water: a molecular dynamics simulation study based on NMR data

Various experimental studies of hen egg white lysozyme (HEWL) in water and TFE/water clearly indicate structural differences between the native state and TFE state of HEWL, e.g. the helical content of the protein in the TFE state is much higher than in the native state. However, the available detailed NMR studies were not sufficient to determine fully a structure of HEWL in the TFE state. Different molecular dynamics (MD) simulations, i.e. at room temperature, at increased temperature and using proton–proton distance restraints derived from NMR NOE data, have been used to generate configurational ensembles corresponding to the TFE state of HEWL. The configurational ensemble obtained at room temperature using atom-atom distance restraints measured for HEWL in TFE/water solution satisfies the experimental data and has the lowest protein energy. In this ensemble residues 50–58, which are part of the β-sheet in native HEWL, adopt fluctuating α-helical secondary structure.     

Proton nuclear magnetic resonance study of the B9(Asp) mutant of human insulin. Sequential assignment and secondary structure

The sequence-specific 1H nuclear magnetic resonance (n.m.r.) assignment of 49 of the 51 amino acid residues of human B9(Asp) insulin in water at low pH is reported. Spin systems were identified using a series of two-dimensional n.m.r. techniques. For the majority of the amino acid residues with unique spin systems, particularly Ala, Thr, Val, Leu, Ile and Lys, the complete spin systems were identified. Sequence-specific assignments were obtained from sequential nuclear Overhauser enhancement (NOE) connectivities. The results indicate that the solution structure of the mutant closely resembles the crystal structure of native insulin. Thus, the NOE data reveal three helical domains all consistent with the secondary structure of the native human 2Zn insulin in the crystal phase. Numerous slowly exchanging amide protons support these structural elements, and indicate a relatively stable structure of the protein. A corresponding resemblance of the tertiary structures in the two phases is also suggested by slowly exchanging amide protons, and by the extreme chemical shift values observed for the beta-protons of B15(Leu) that agree with a close contact between this residue and the aromatic rings of B24(Phe) and B26(Tyr), as found in the crystal structure of the 2Zn insulin. Finally, there are clear indications that the B9(Asp) insulin mutant exists primarily as a dimer under the given conditions.     

Structure-specific effects of protein topology on cross-beta assembly: studies of insulin fibrillation

Systemic amyloidoses, an important class of protein misfolding diseases, are often due to fibrillation of disulfide-cross-linked globular proteins otherwise unrelated in sequence or structure. Although cross-beta assembly is regarded as a universal property of polypeptides, it is not understood how such amyloids accommodate diverse disulfide connectivities. Does amyloidogenicity depend on protein topology? A model is provided by insulin, a two-chain protein containing three disulfide bridges. The importance of chain topology is demonstrated by mini-proinsulin (MP), a single-chain analogue in which the C-terminus of the B chain (residue B30) is tethered to the N-terminus of the A chain (A1). The B30-A1 tether impedes the fiber-specific alpha --> beta transition, leading to slow formation of a structurally nonuniform amorphous precipitate. Conversely, fibrillation is robust to interchange of disulfide bridges. Whereas native insulin exhibits pairings [A6-A11, A7-B7, and A20-B19], metastable isomers with alternative pairings [A6-B7, A7-A11, A20-B19] or [A6-A7, A11-B7, A20-B1] readily undergo fibrillation with essentially identical alpha --> beta transitions. Respective pairing schemes are in each case retained. Isomeric fibrils and the amorphous MP precipitate are each able to seed the fibrillation of wild-type insulin, suggesting a structural correspondence between respective nuclei or modes of assembly. Together, our results demonstrate that effects of polypeptide topology on amyloidogenicity depend on structural context. Although the native structures and stabilities of single-chain insulin analogues are similar to those of wild-type insulin, the interchain tether constrains the extent of conformational distortion at elevated temperature, retards initial non-native aggregation, and is apparently incompatible with the mature structure of an insulin protofilament. We speculate that the general danger of fibrillation has imposed a constraint in protein evolution, selecting for topologies unfavorable to amyloid formation.     

Three-dimensional solution structure of an insulin dimer. A study of the B9(Asp) mutant of human insulin using nuclear magnetic resonance, distance geometry and restrained molecular dynamics.

The solution structure of the B9(Asp) mutant of human insulin has been determined by two-dimensional 1H nuclear magnetic resonance spectroscopy. Thirty structures were calculated by distance geometry from 451 interproton distance restraints based on intra-residue, sequential and long-range nuclear Overhauser enhancement data, 17 restraints on phi torsional angles obtained from 3JH alpha HN coupling constants, and the restraints from 17 hydrogen bonds, and the three disulphide bridges. The distance geometry structures were optimized using restrained molecular dynamics (RMD) and energy minimization. The average root-mean-square deviation for the best 20 RMD refined structures is 2.26 A for the backbone and 3.14 A for all atoms if the less well-defined N and C-terminal residues are excluded. The helical regions are better defined, with root-mean-square deviation values of 1.11 A for the backbone and 2.03 A for all atoms. The data analysis and the calculations show that B9(Asp) insulin, in water solution at the applied pH (1.8 to 1.9), is a well-defined dimer with no detectable difference between the two monomers. The association of the two monomers in the solution dimer is relatively loose as compared with the crystal dimer. The overall secondary and tertiary structures of the monomers in the 2Zn crystal hexamer is found to be preserved. The conformation-averaged NMR structures obtained for the monomer is close to the structure of molecule 1 in the hexamer of the 2Zn insulin crystal. However, minor, but significant deviations from this structure, as well as from the structure of monomeric insulin in solution, exist and are ascribed to the absence of the hexamer and crystal packing forces, and to the presence of monomer-monomer interactions, respectively. Thus, the monomer in the solution dimer shows a conformation similar to that of the crystal monomer in molecular regions close to the monomer-monomer interface, whereas it assumes a conformation similar to that of the solution structure of monomeric insulin in other regions, suggesting that B9(Asp) insulin adopts a monomer-like conformation when this is not inconsistent with the monomer-monomer arrangement in the dimer.     

Effects of cysteine to serine substitutions in the two inter-chain disulfide bonds of insulin

Using site-directed mutagenesis we deleted the two inter-chain disulfide bonds of insulin, separately or both, by substitution of the cysteine residues with serine. Deletion of A20-B19 or both of the two inter-chain disulfide bonds resulted in the complete loss of secretion of the mutant single-chain porcine insulin precursor (PIP) from Saccharomyces cerevisiae cells. Removal of the A7-B7 disulfide bond resulted in a large reduction of secretion, but we could obtain the mutant for analysis of its biological and some physico-chemical properties. The A7-B7 disulfide bond deleted insulin mutant retained only 0.1% receptor-binding activity compared with porcine insulin, and its in vivo biological potency measured by mouse convulsion assay was also very low. We also studied some physico-chemical properties of the mutant using circular dichroism, native polyacrylamide gel electrophoresis and reversed-phase HPLC, which revealed some structural changes of the mutant peptides compared to native insulin. The present study shows that the two inter-chain disulfide bonds are important for efficient in vivo folding/secretion of PIP from yeast, especially the A20-B19 disulfide bond, and that the A7-B7 disulfide bond is crucial for maintaining the native conformation and biological activity of insulin.     

Mutational analysis of the three conserved valine residues of insulin and a proposal of "isosteric residue"

To further understand the role of the three conserved Val residues in insulin, B12Val, B18Val, and A3Val, five insulin mutants-[A3Ser]insulin, [B12Thr]insulin, (desB30)[B12Ser]insulin, [B18Thr] insulin, and [B18Leu]insulin--were obtained by means of site-directed mutagenesis and their receptor-binding activities as well as in vivo biological potencies were measured. The two B18 mutants, [B18Thr]insulin and [B18Leu]insulin, both retained relatively high receptor-binding activities (70% and 30% of native porcine insulin, respectively) as well as relatively high in vivo biological potencies. The receptor-binding activities of [B12Thr]insulin and (desB30)[B12Ser]insulin were 5.1% and 0.2%, respectively. However the in vivo biological potency of [B12Thr]insulin was still about 50% of native insulin, whereas that of (desB30)[B12Ser]insulin decreased drastically. The [A3Ser]insulin retained 1.4% of the receptor-binding activity and low in vivo biological potency. These results, together with previous reports showed that when the three conserved Val residues were replaced by residues containing a beta-branched side-chain, such as Thr or Ile, the insulin mutants retained higher biological activities than those mutants replaced by other residues. Here we propose that Val, Thr, and Ile are "isosteric residues' because they all contain a beta-branched side-chain. This proposal may have perhaps general significance in protein design and protein engineering.     

Dissecting the role of disulfide bonds on the amyloid formation of insulin

Disulfide bonds play a critical role in the stability and folding of proteins. Here, we used insulin as a model system, to investigate the role of its individual disulfide bond during the amyloid formation of insulin. Tris(2-carboxyethyl)phosphine (TCEP) was applied to reduce two of the three disulfide bonds in porcine insulin and the reduced disulfide bonds were then alkylated by iodoacetamide. Three disulfide bond-modified insulin analogs, INS-2 (lack of A6-A11), INS-3 (lack of A7-B7) and INS-6 (lack of both A6-A11 and A7-B7), were obtained. Far-UV circular dichroism (CD) spectroscopy results indicated that the secondary structure of INS-2 was the closest to insulin under neutral conditions, followed by INS-3 and INS-6, whereas in an acidic solution all analogs were essentially unfolded. To test how these modifications affect the amyloidogenicity of insulin, thioflavin-T (ThT) fluorescence and transmission electronic microscopy (TEM) were performed. Our results showed that all analogs were more prone to aggregation than insulin, with the order of aggregation rates being INS-6>INS-3>INS-2. Cross-linking of unmodified proteins (PICUP) assay results showed that analogs without A6-A11 (INS-2 and INS-6) have a higher potential for oligomerization than insulin and INS-3, which is accompanied with a higher cytotoxicity as the hemolytic assays of human erythrocytes suggested. The results indicated that breakage of A7-B7 induced more unfolding of the insulin structure and a higher amyloidogenicity than breakage of A6-A11, but breakage of A6-A11 caused a significant cytotoxicity increase and a higher potency to form high order toxic oligomers.     

Processing and presentation of insulin. II. Evidence for intracellular, plasma membrane-associated and extracellular degradation of human insulin by antigen-presenting B cells

To study the biochemistry of processing of a soluble protein Ag by an APC, we investigated how 125I-labeled human insulin (HI) is processed in situ by TA3 mouse hybridoma B cells. Fractionation of TA3 cells into their extracellular, plasma membrane-associated and intracellular compartments coupled with the use of HPLC enabled us to analyze several peptides derived from each compartment. One HI peptide found in all three compartments is composed of residues A1-A14 disulfide-linked to B7-B26 (A1-A14/B7-B26). The presence of this peptide in the extracellular compartment likely resulted from digestion of HI by an enzyme(s) released from the APC. Extracellular processing of radiolabeled HI was inhibited completely by unlabeled HI and N-ethylmaleimide, an inhibitor of a previously described insulin-specific protease, partially by lysozyme but not by BSA or OVA. This suggests that the enzyme involved in the extracellular processing of insulin is relatively insulin-specific and gives rise to the A1-A14/B7-B26 peptide. The processing of HI both at the plasma membrane and intracellularly was inhibited by chloroquine, monensin, and NH4Cl, suggesting that both intracellular pH changes and endocytic and exocytic events may be required for these compartments to process insulin. Kinetic analyses revealed that the processing of insulin into the A1-A14/B7-B26 peptide is first detected at the plasma membrane then intracellularly and finally in the extracellular compartment. This unlabeled A1-A14/B7-B26 peptide was purified from the extracellular compartment of TA3 APC by HPLC; when presented by TA3 APC this peptide effectively stimulated pork insulin (PI/I-Ad) specific Th cells to secrete IL-2. These data, taken together with the identification of another processed insulin peptide, A7-A11/B7-B26, have enabled us to elucidate the first steps in the biochemical pathway(s) of processing of insulin as an Ag in a B cell APC.     

A cavity-forming mutation in insulin induces segmental unfolding of a surrounding α-helix

To investigate the cooperativity of insulin's structure, a cavity-forming substitution was introduced within the hydrophobic core of an engineered monomer. The substitution, Ile(A2)-->Ala in the A1-A8 alpha-helix, does not impair disulfide pairing between chains. In accord with past studies of cavity-forming mutations in globular proteins, a decrement was observed in thermodynamic stability (DeltaDeltaG(u) 0.4-1.2 kcal/mole). Unexpectedly, CD studies indicate an attenuated alpha-helix content, which is assigned by NMR spectroscopy to selective destabilization of the A1-A8 segment. The analog's solution structure is otherwise similar to that of native insulin, including the B chain's supersecondary structure and a major portion of the hydrophobic core. Our results show that (1) a cavity-forming mutation in a globular protein can lead to segmental unfolding, (2) tertiary packing of Ile(A2), a residue of low helical propensity, stabilizes the A1-A8 alpha-helix, and (3) folding of this segment is not required for native disulfide pairing or overall structure. We discuss these results in relation to a hierarchical pathway of protein folding and misfolding. The Ala(A2) analog's low biological activity (0.5% relative to the parent monomer) highlights the importance of the A1-A8 alpha-helix in receptor recognition.     

Structural and Functional Study of the GlnB22-Insulin Mutant Responsible for Maturity-Onset Diabetes of the Young

The insulin gene mutation c.137G>A (R46Q), which changes an arginine at the B22 position of the mature hormone to glutamine, causes the monogenic diabetes variant maturity-onset diabetes of the young (MODY). In MODY patients, this mutation is heterozygous, and both mutant and wild-type (WT) human insulin are produced simultaneously. However, the patients often depend on administration of exogenous insulin. In this study, we chemically synthesized the MODY mutant [GlnB22]-insulin and characterized its biological and structural properties. The chemical synthesis of this insulin analogue revealed that its folding ability is severely impaired. In vitro and in vivo tests showed that its binding affinity and biological activity are reduced (both approximately 20% that of human insulin). Comparison of the solution structure of [GlnB22]-insulin with the solution structure of native human insulin revealed that the most significant structural effect of the mutation is distortion of the B20-B23 β-turn, leading to liberation of the B chain C-terminus from the protein core. The distortion of the B20-B23 β-turn is caused by the extended conformational freedom of the GlnB22 side chain, which is no longer anchored in a hydrogen bonding network like the native ArgB22. The partially disordered [GlnB22]-insulin structure appears to be one reason for the reduced binding potency of this mutant and may also be responsible for its low folding efficiency in vivo. The altered orientation and flexibility of the B20-B23 β-turn may interfere with the formation of disulfide bonds in proinsulin bearing the R46Q (GlnB22) mutation. This may also have a negative effect on the WT proinsulin simultaneously biosynthesized in β-cells and therefore play a major role in the development of MODY in patients producing [GlnB22]-insulin.     

The solution structure of a monomeric insulin. A two-dimensional 1H-NMR study of des-(B26-B30)-insulin in combination with distance geometry and restrained molecular dynamics.

The solution conformation of des-(B26-B30)-insulin (DPI) has been investigated by 1H-NMR spectroscopy. A set of 250 approximate interproton distance restraints, derived from two-dimensional nuclear Overhauser enhancement spectra, were used as the basis of a structure determination using distance geometry (DG) and distance-bound driven dynamics (DDD). Sixteen DG structures were optimized using energy minimization (EM) and submitted to short 5-ps restrained molecular dynamics (RMD) simulations. A further refinement of the DDD structure with the lowest distance errors was done by energy minimization, a prolonged RMD simulation in vacuo and a time-averaged RMD simulation. An average structure was obtained from a trajectory generated during 20-ps RMD. The final structure was compared with the des-(B26-B30)-insulin crystal structure refined by molecular dynamics and the 2-Zn crystal structure of porcine insulin. This comparison shows that the overall structure of des-(B26-B30)-insulin is retained in solution with respect to the crystal structures with a high flexibility at the N-terminal part of the A chain and at the N-terminal and C-terminal parts of the B chain. In the RMD run a high mobility of Gly A1, Asn A21 and of the side chain of Phe B25 is noticed. One of the conformations adopted by des-(B26-B30)-insulin in solution is similar to that of molecule 1 (Chinese nomenclature) in the crystal structure of porcine insulin.     

Processing and presentation of insulin. I. Analysis of immunogenic peptides and processing requirements for insulin A loop-specific T cells

The processing and presentation of insulin by B hybridoma cells to insulin A loop-specific T cell hybridomas was investigated. We found that the activation of these T cells requires insulin to be processed in a manner that permits unfolding of the molecule and prevents extensive proteolysis. An analysis of insulin peptides formed by either enzymatic digestion in vitro or solid phase synthesis revealed that a conformational determinant comprised of residues A1-A14 disulfide-linked to B7-B15 is most immunogenic to these T cells. Reduction and/or proteolysis of this peptide markedly decreases its immunogenicity. The pork insulin A1-A14/B7-B15 peptide differs only at residue A4 from its mouse insulin homolog. Thus, Glu A4 forms part of the antigenic site recognized by a pork insulin/I-Ad-specific mouse T cell. This insulin peptide can be induced to assume an alpha-helical configuration in a hydrophobic environment. In addition, virtually all of the residues of this peptide are identical with those predicted to be situated in amphipathic regions of the native insulin molecule. N-Ethylmaleimide and bacitracin, which inhibit the activity of two cytosolic enzymes that cleave insulin, enhance the antigen presentation of insulin. This suggests that these enzymes may participate in the nonlysosomal antigen processing of insulin by a B lymphocyte. A comparison of the relative avidity of several T cell hybridomas, which have the same apparent specificity for this insulin peptide, showed that an increase in their avidity was associated with a degeneracy in their fine specificity. Our data demonstrate that the efficiency of processing and presentation of a given antigenic determinant is related to the conformation of the determinant and the specificity and avidity of the T cell.     

Hierarchical protein "un-design": insulin's intrachain disulfide bridge tethers a recognition alpha-helix

A hierarchical pathway of protein folding can enable segmental unfolding by design. A monomeric insulin analogue containing pairwise substitution of internal A6-A11 cystine with serine [[Ser(A6),Ser(A11),Asp(B10),Lys(B28),Pro(B29)]insulin (DKP[A6-A11](Ser))] was previously investigated as a model of an oxidative protein-folding intermediate [Hua, Q. X., et al. (1996) J. Mol. Biol. 264, 390-403]. Its structure exhibits local unfolding of an adjoining amphipathic alpha-helix (residues A1-A8), leading to a 2000-fold reduction in activity. Such severe loss of function, unusual among mutant insulins, is proposed to reflect the cost of induced fit: receptor-directed restoration of the alpha-helix and its engagement in the hormone's hydrophobic core. To test this hypothesis, we have synthesized and characterized the corresponding alanine analogue [[Ala(A6),Ala(A11),Asp(B10),Lys(B28), Pro(B29)]insulin (DKP[A6-A11](Ala))]. Untethering the A6-A11 disulfide bridge by either amino acid causes similar perturbations in structure and dynamics as probed by circular dichroism and (1)H NMR spectroscopy. The analogues also exhibit similar decrements in thermodynamic stability relative to that of the parent monomer as probed by equilibrium denaturation studies (Delta Delta G(u) = 3.0 +/- 0.5 kcal/mol). Despite such similarities, the alanine analogue is 50 times more active than the serine analogue. Enhanced receptor binding (Delta Delta G = 2.2 kcal/mol) is in accord with alanine's greater helical propensity and more favorable hydrophobic-transfer free energy. The success of an induced-fit model highlights the applicability of general folding principles to a complex binding process. Comparison of DKP[A6-A11](Ser) and DKP[A6-A11](Ala) supports the hypothesis that the native A1-A8 alpha-helix functions as a preformed recognition element tethered by insulin's intrachain disulfide bridge. Segmental unfolding by design provides a novel approach to dissecting structure-activity relationships.     

Inactive conformation of an insulin despite its wild-type sequence.

The peptide group between residues B24 and B25 of insulin was replaced by an ester bond. This modification only in the backbone was meant to eliminate a structurally important H-bond between the amide proton of B25 and the carbonyl oxygen of A19, and consequently to enhance detachment of the C-terminal B-chain from the body of the molecule, exposing the underlying A-chain. According to a model derived from the effects of side-chain substitutions, main-chain shortening, and crosslinking, this conformational change is prerequisite for receptor binding. Contrary to the expectation that increased flexibility would increase receptor binding and activity, depsi-insulin ([B24-B25 CO-O]insulin) has turned out be only 3-4% potent. In search of an explanation for this observation, the solution structure of depsi-insulin was determined by two-dimensional 1H-NMR spectroscopy. It was found that the loss of the B25-A19 H-bond does not entail detachment of the C-terminal B-chain. On the contrary, it is overcompensated by a gain in hydrophobic interaction achieved by insertion of the Phe B25 side chain into the molecule's core. This is possible because of increased rotational freedom in the backbone owing to the ester bond. Distortion of the B20-B23 turn and an altered direction of the distal B-chain are consequences that also affect self-association. The exceptional position of the B25 side chain is thus the key feature of the depsi-insulin structure. Being buried in the interior, it is not available for guiding the interaction with the receptor, a crucial role attributed to it by the model. This seems to be the main reason why the structure of depsi-insulin represents an inactive conformation.     

Conformational analysis of peptides corresponding to all the secondary structure elements of protein L B1 domain: secondary structure propensities are not conserved in proteins with the same fold.

The solution conformation of three peptides corresponding to the two beta-hairpins and the alpha-helix of the protein L B1 domain have been analyzed by circular dichroism (CD) and nuclear magnetic resonance spectroscopy (NMR). In aqueous solution, the three peptides show low populations of native and non-native locally folded structures, but no well-defined hairpin or helix structures are formed. In 30% aqueous trifluoroethanol (TFE), the peptide corresponding to the alpha-helix adopts a high populated helical conformation three residues longer than in the protein. The hairpin peptides aggregate in TFE, and no significant conformational change occurs in the NMR observable fraction of molecules. These results indicate that the helical peptide has a significant intrinsic tendency to adopt its native structure and that the hairpin sequences seem to be selected as non-helical. This suggests that these sequences favor the structure finally attained in the protein, but the contribution of the local interactions alone is not enough to drive the formation of a detectable population of native secondary structures. This pattern of secondary structure tendencies is different to those observed in two structurally related proteins: ubiquitin and the protein G B1 domain. The only common feature is a certain propensity of the helical segments to form the native structure. These results indicate that for a protein to fold, there is no need for large native-like secondary structure propensities, although a minimum tendency to avoid non-native structures and to favor native ones could be required.