Whole-cell biocatalysts for biodiesel fuel production

Biodiesel fuel (BDF), which refers to fatty acid alkyl esters, has attracted considerable attention as an environmentally friendly alternative fuel for diesel engines. Alkali catalysis is widely applied for the commercial production of BDF. However, enzymatic transesterification offers considerable advantages, including reducing process operations in biodiesel fuel production and an easy separation of the glycerol byproduct. The high cost of the lipase enzyme is the main obstacle for a commercially feasible enzymatic production of biodiesel fuels. To reduce enzyme associated process costs, the immobilization of fungal mycelium within biomass support particles (BSPs) as well as expression of the lipase enzyme on the surface of yeast cells has been developed to generate whole-cell biocatalysts for industrial applications.     

酶法合成生物柴油工业化研究进展

介绍了北京化工大学近年来酶法合成生物柴油工业化研究的结果。主要内容包括以下几个方面:高产脂肪酶菌株的选育、脂肪酶发酵工艺优化及放大、脂肪酶固定化方法、酶反应器放大、生物柴油分离精制及副产物甘油综合利用。该脂肪酶假丝酵母Candida sp.99-125在5 m3罐发酵活力不低于8 000 IU/mL,然后将该脂肪酶吸附固定在织物膜上并进行表面改性,用于搅拌罐式反应器生产每吨甲酯的需酶量仅为4.2 kg,产品经分离精制调质后,其各项指标完全符合德国生物柴油生产标准。副产物甘油可用于1,3-丙二醇发酵,30 L发酵罐中1,3-丙二醇的产量可达到76.1 g/L。     

Esterification using a liquid lipase to remove residual free fatty acids in biodiesel

Lately, the price of liquid formulated lipase enzymes, usable in biodiesel production, has been significantly reduced. This enables one-time use of these enzymes for transesterification, and the process is used industrially. However, the process suffers a drawback by leaving 2−3 % free fatty acids in the crude biodiesel, which reduces the profitability. This article discusses a novel enzymatic FFA esterification reaction utilizing liquid lipase B from Candida antarctica (CALB) along with glycerol at low water concentrations to eliminate the residual FFA. The reaction setup was found able to reduce the free fatty acid concentration to within biodiesel specifications of < 0.25 wt.% FFA. Additionally, two alternative process setups are proposed, which were both found viable through a combination of experiments and simulations, and can be developed into full-scale processes. The resulting two-step enzymatic biodiesel process - transesterification followed by esterification - provides a potential process layout for the industrial production of biodiesel.     

Production of Biodiesel Using Immobilized Lipase—A Critical Review

Increase in volume of biodiesel production in the world scenario proves that biodiesel is accepted as an alternative to conventional fuel. Production of biodiesel using alkaline catalyst has been commercially implemented due to its high conversion and low production time. For the product and process development of biodiesel, enzymatic transesterification has been suggested to produce a high purity product with an economic, environment friendly process at mild reaction conditions. The enzyme cost being the main hurdle can be overcome by immobilization. Immobilized enzyme, which has been successfully used in various fields over the soluble counterpart, could be employed in biodiesel production with the aim of reducing the production cost by reusing the enzyme. This review attempts to provide an updated compilation of the studies reported on biodiesel production by using lipase immobilized through various techniques and the parameters, which affect their functionality.     

Biodiesel production via enzymatic catalysis

A review of current work in biodiesel production via enzymatic catalysis has been done. The parameters of the process as determined by laboratories are represented and analyzed. The main factors affecting interesterification are considered. The major types of oils and alcohols used in biodiesel synthesis are listed. The means of lipase enzyme immobilization, including exposure on the cell surface, are discussed.     

Biodiesel production with immobilized lipase: A review

Fatty acid alkyl esters, also called biodiesel, are environmentally friendly and show great potential as an alternative liquid fuel. Biodiesel is produced by transesterification of oils or fats with chemical catalysts or lipase. Immobilized lipase as the biocatalyst draws high attention because that process is “greener”. This article reviews the current status of biodiesel production with immobilized lipase, including various lipases, immobilization methods, various feedstocks, lipase inactivation caused by short chain alcohols and large scale industrialization. Adsorption is still the most widely employed method for lipase immobilization. There are two kinds of lipase used most frequently especially for large scale industrialization. One is Candida antartica lipase immobilized on acrylic resin, and the other is Candida sp. 99–125 lipase immobilized on inexpensive textile membranes. However, to further reduce the cost of biodiesel production, new immobilization techniques with higher activity and stability still need to be explored.     

复合脂肪酶协同催化制备生物柴油的研究

【目的】探讨复合酶协同催化体系在含水量较高的体系中催化油脂制备生物柴油的工艺条件。【方法】通过基因工程手段在毕赤酵母中分别高效分泌表达南极假丝酵母脂肪酶(CALB)和米根霉脂肪酶(ROL),构建CALB和ROL复合酶协同催化体系制备生物柴油,利用单因素实验优化工艺条件,以甲酯化得率作为复合酶协同催化体系效能的评价标准。【结果】优化工艺条件为:CALB?ROL最佳复合酶配比为7?3,每克大豆油中加入16 U的复合脂肪酶,甲醇与大豆油摩尔比为4?1,并按0 h时2?1醇油摩尔比,12 h和24 h时以1?1醇油摩尔比分批加入甲醇,含水量为30%-60%之间,40°C反应29-34 h,甲酯得率达到93%。【结论】该复合酶协同催化体系对环境友好,与常规酶法制备生物柴油工艺相比对酶的使用量和催化时间减少幅度都在50%以上,本复合酶协同催化体系能有效降低生物柴油制备成本,具有较好的工业化应用前景。     

Biodiesel production from Jatropha curcas: a critical review

The fuel crisis and environmental concerns, mainly due to global warming, have led researchers to consider the importance of biofuels such as biodiesel. Vegetable oils, which are too viscous to be used directly in engines, are converted into their corresponding methyl or ethyl esters by a process called transesterification. With the recent debates on “food versus fuel,” non-edible oils, such as Jatropha curcas, are emerging as one of the main contenders for biodiesel production. Much research is still needed to explore and realize the full potential of a green fuel from J. curcas. Upcoming projects and plantations of Jatropha in countries such as India, Malaysia, and Indonesia suggest a promising future for this plant as a potential biodiesel feedstock. Many of the drawbacks associated with chemical catalysts can be overcome by using lipases for enzymatic transesterification. The high cost of lipases can be overcome, to a certain extent, by immobilization techniques. This article reviews the importance of the J. curcas plant and describes existing research conducted on Jatropha biodiesel production. The article highlights areas where further research is required and relevance of designing an immobilized lipase for biodiesel production is discussed.     

Study on acyl migration in immobilized lipozyme TL-catalyzed transesterification of soybean oil for biodiesel production

During enzymatic transesterification of soybean oils with methanol for biodiesel production, it was supposed that the maximum biodiesel yield was only 66% since lipozyme TL was a typical lipase with a strict 1,3-positional specificity. However, it has been observed that over 90% biodiesel yield could be obtained. It was therefore assumed, and subsequently demonstrated, that acyl migration occurred during the reaction process. Different factors which may influence the acyl migration were explored further and it has been found that the silica gel acting as the immobilized material contributes significantly to the promotion of acyl migration in the transesterification process. The final biodiesel yield was only 66% when 4% lipozyme TL used, while about 90% biodiesel yield could be achieved when combining 6% silica gel with 4% lipozyme TL, almost as high as that of 10% immobilized lipase used for the reaction.     

Lipase-catalyzed biodiesel production with methyl acetate as acyl acceptor

Biodiesel is an alternative diesel fuel made from renewable biological resources. During the process of biodiesel production, lipase-catalyzed transesterification is a crucial step. However, current techniques using methanol as acyl acceptor have lower enzymatic activity; this limits the application of such techniques in large-scale biodiesel production. Furthermore, the lipid feedstock of currently available techniques is limited. In this paper, the technique of lipase-catalyzed transesterification of five different oils for biodiesel production with methyl acetate as acyl acceptor was investigated, and the transesterification reaction conditions were optimized. The operation stability of lipase under the obtained optimal conditions was further examined. The results showed that under optimal transesterification conditions, both plant oils and animal fats led to high yields of methyl ester: cotton-seed oil, 98%; rapeseed oil, 95%; soybean oil, 91%; tea-seed oil, 92%; and lard, 95%. Crude and refined cottonseed oil or lard made no significant difference in yields of methyl ester. No loss of enzymatic activity was detected for lipase after being repeatedly used for 40 cycles (ca. 800 h), which indicates that the operational stability of lipase was fairly good under these conditions. Our results suggest that cotton-seed oil, rape-seed oil and lard might substitute soybean oil as suitable lipid feedstock for biodiesel production. Our results also show that our technique is fit for various lipid feedstocks both from plants and animals, and presents a very promising way for the large-scale biodiesel production.     

An overview of enzymatic production of biodiesel

Biodiesel production has received considerable attention in the recent past as a biodegradable and nonpolluting fuel. The production of biodiesel by transesterification process employing alkali catalyst has been industrially accepted for its high conversion and reaction rates. Recently, enzymatic transesterification has attracted much attention for biodiesel production as it produces high purity product and enables easy separation from the byproduct, glycerol. But the cost of enzyme remains a barrier for its industrial implementation. In order to increase the cost effectiveness of the process, the enzyme (both intracellular and extracellular) is reused by immobilizing in a suitable biomass support particle and that has resulted in considerable increase in efficiency. But the activity of immobilized enzyme is inhibited by methanol and glycerol which are present in the reacting mixture. The use of tert-butanol as solvent, continuous removal of glycerol, stepwise addition of methanol are found to reduce the inhibitory effects thereby increasing the cost effectiveness of the process. The present review analyzes these methods reported in literature and also suggests a suitable method for commercialization of the enzymatic process.     

Biotechnological production of biodiesel fuel using biocatalysed transesterification: A review

Biotechnological production of biodiesel has attracted considerable attention during the past decade compared to chemical-catalysed production since biocatalysis-mediated transesterification has many advantages. Currently, there are extensive reports on enzyme-catalysed transesterification for biodiesel production; the related research can be classified into immobilised-extracellular and immobilised-intracellular biocatalysis and this review focusses on these forms of biocatalyst for biodiesel production. The optimisation of the most important operating conditions affecting lipase-catalysed transesterification and the yield of alkyl esters, such as the type and form of lipase, the type of alcohol, the presence of organic solvents, the content of water in the oil, temperature and the presence of glycerol, are discussed. However, there is still a need to optimise lipase-catalysed transesterification and reduce the cost of lipase production before it is applied commercially. Optimisation research of lipase-catalysed transesterification could include development of new reactor systems with immobilised biocatalysts, the use of lipases tolerant to organic solvents, intracellular lipases (whole microbial cells) and genetically modified microorganisms (intelligent yeasts). Biodiesel fuel is expensive in comparison with petroleum-based fuel and 60–70% of the cost is associated with feedstock oil and enzyme. Therefore ways of reducing the cost of biodiesel with respect to enzyme and substrate oils reported in literature are also presented.     

Process design and evaluation of value-added chemicals production from biomass

Three different biodiesel production processes were simulated using the SuperPro Designer program. The process for producing biodiesel from soybean oil and methanol was designed using commercial chemical catalysts. This chemical process was compared with the biological process catalyzed by immobilized enzymes. In addition, a hybrid process consisting of catalytic biodiesel production and enzymatic glycerol carbonate production was designed and simulated for the conversion of waste glycerol to value-added chemical. Finally, the economics and productivity of these processes were evaluated to determine economic feasibility.     

Biodiesel fuel production via transesterification of oils using lipase biocatalyst

Biodiesel has gained widespread importance in recent years as an alternative, renewable liquid transportation fuel. It is derived from natural triglycerides in the presence of an alcohol and an alkali catalyst via a transesterification reaction. To date, transesterification based on the use of chemical catalysts has been predominant for biodiesel production at the industrial scale due to its high conversion efficiency at reasonable cost. Recently, biocatalytic transesterification has received considerable attention due to its favorable conversion rate and relatively simple downstream processing demands for the recovery of by-products and purification of biodiesel. Biocatalysis of the transesterification reaction using commercially purified lipase represents a major cost constraint. However, more cost-effective techniques based on the immobilization of both extracellular and intracellular lipases on support materials facilitate the reusability of the catalyst. Other variables, including the presence of alcohol, glycerol and the activity of water can profoundly affect lipase activity and stability during the reaction. This review evaluates the current status for lipase biocatalyst-mediated production of biodiesel, and identifies the key parameters affecting lipase activity and stability. Pioneer studies on reactor-based lipase conversion of triglycerides are presented.     

Production of biodiesel by lipase-catalyzed transesterification of vegetable oils: a kinetics study

Kinetics of production of biodiesel by enzymatic methanolysis of vegetable oils using lipase has been investigated. A mathematical model taking into account the mechanism of the methanolysis reaction starting from the vegetable oil as substrate, rather than the free fatty acids, has been developed. The kinetic parameters were estimated by fitting the experimental data of the enzymatic reaction of sunflower oil by two types of lipases, namely, Rhizomucor miehei lipase (RM) immobilized on ion-exchange resins and Thermomyces lanuginosa lipase (TL) immobilized on silica gel. There was a good agreement between the experimental results of the initial rate of reaction and those predicted by the proposed model equations, for both enzymes. From the proposed model equations, the regions where the effect of alcohol inhibition fades, at different substrate concentrations, were identified. The proposed model equation can be used to predict the rate of methanolysis of vegetable oils in a batch or a continuous reactor and to determine the optimal conditions for biodiesel production.     

Application of a Burkholderia cepacia lipase-immobilized silica monolith to batch and continuous biodiesel production with a stoichiometric mixture of methanol and crude Jatropha oil

Background

The enzymatic production of biodiesel through alcoholysis of triglycerides has become more attractive because it shows potential in overcoming the drawbacks of chemical processes. In this study, we investigate the production of biodiesel from crude, non-edible Jatropha oil and methanol to characterize Burkholderia cepacia lipase immobilized in an n-butyl-substituted hydrophobic silica monolith. We also evaluate the performance of a lipase-immobilized silica monolith bioreactor in the continuous production of biodiesel.

Results

The Jatropha oil used contained 18% free fatty acids, which is problematic in a base-catalyzed process. In the lipase-catalyzed reaction, the presence of free fatty acids made the reaction mixture homogeneous and allowed bioconversion to proceed to 90% biodiesel yield after a 12 hour reaction time. The optimal molar ratio of methanol to oil was 3.3 to 3.5 parts methanol to one part oil, with water content of 0.6% (w/w). Further experiments revealed that B. cepacia lipase immobilized in hydrophobic silicates was sufficiently tolerant to methanol, and glycerol adsorbed on the support disturbed the reaction to some extent in the present reaction system. The continuous production of biodiesel was performed at steady state using a lipase-immobilized silica monolith bioreactor loaded with 1.67 g of lipase. The yield of 95% was reached at a flow rate of 0.6 mL/h, although the performance of the continuous bioreactor was somewhat below that predicted from the batch reactor. The bioreactor was operated successfully for almost 50 days with 80% retention of the initial yield.

Conclusions

The presence of free fatty acids originally contained in Jatropha oil improved the reaction efficiency of the biodiesel production. A combination of B. cepacia lipase and its immobilization support, n-butyl-substituted silica monolith, was effective in the production of biodiesel. This procedure is easily applicable to the design of a continuous flow-through bioreactor system.     

Biodiesel production with special emphasis on lipase-catalyzed transesterification

The production of biodiesel by transesterification employing acid or base catalyst has been industrially accepted for its high conversion and reaction rates. Downstream processing costs and environmental problems associated with biodiesel production and byproducts recovery have led to the search for alternative production methods. Recently, enzymatic transesterification involving lipases has attracted attention for biodiesel production as it produces high purity product and enables easy separation from the byproduct, glycerol. The use of immobilized lipases and immobilized whole cells may lower the overall cost, while presenting less downstream processing problems, to biodiesel production. The present review gives an overview on biodiesel production technology and analyzes the factors/methods of enzymatic approach reported in the literature and also suggests suitable method on the basis of evidence for industrial production of biodiesel.     

脂肪酶催化合成生物柴油的研究

生物柴油是用动植物油脂或长链脂肪酸与甲醇等低碳醇合成的脂肪酸甲酯,是一种替代能源。这里探讨了生物法制备生物柴油的过程,采用脂肪酶酯化和酯交换两条工艺路线进行催化合成。深入研究制备过程中,不同脂肪酶、酶的用量和纯度、有机溶剂、低碳醇的抑制作用、吸水剂的作用、反应时间和进程、底物的特异性和底物摩尔比等参数对酯化过程的影响。试验结果表明,采用最佳酯化反应参数和分批加入甲醇并用硅胶作脱水剂的工艺过程,酯化率可以达到92％,经分离纯化后的产品GC分析的纯度可达98％以上,固定化酶的使用半衰期可达到360h。同时对酯交换制备生物柴油过程中,甲醇的用量和甲醇的加入方式对脂肪酶催化过程的影响作了初步研究,优化后的酯交换率可达到83％。     

Lipase catalyzed transesterification of soybean oil using ethyl acetate,an alternative acyl acceptor

Methanol, the acyl acceptor usually used in the commercial process of biodiesel production, is associated with some problems such as immiscibility with oils and lipase deactivation. To overcome these barriers, ethyl acetate was proposed as an alternative acyl acceptor for the production of biodiesel from soybean oil using an immobilized lipase, Novozym 435, Ethyl acetate mixed well with soybean oil, and only slightly inhibited the lipase activity by 5%. The effects of various environmental parameters, such as the composition of soybean oil and ethyl acetate, lipase content, and reaction temperature, were investigated to determine the optimal conditions for biodiesel production. As a result, the highest biodiesel production yield, 63.3 (±0.6)%, was obtained by using an ethyl acetate and soybean oil mixture with a 6∶1 molar ratio, with 8% of the immobilized lipase based on the weight of oil added at 70°C and 600 rpm.     

Effect of water on lipase NS81006-catalyzed alcoholysis for biodiesel production

Biodiesel production catalyzed by free lipase has been drawing attention for its lower cost and faster reaction rate compared to immobilized lipase. It has been found that free lipase NS81006 could efficiently catalyze alkyl esters production and a certain amount of water is demonstrated to be necessary for the catalytic process. The effect of water content on liquid lipase NS81006-mediated methanolysis and ethanolysis for biodiesel production was first explored respectively in this paper. It was found that with water content ranging from 3% to 10% (based on oil weight), there was no significant difference in the final alkyl ester yield either in NS81006-mediated methanolysis or ethanolysis process, while the quality of biodiesel varied obviously. The acid value as well as the contents of monoglyceride and diglyceride were much lower in the lower water-containing system. With the water content decreasing from 10% to 3%, the acid value reduced from 8.24 to 4.89 mg KOH/g oil, and the content of MAG and DAG dropped to 0.31 and 0.22, from 0.62 and 0.74, respectively. Lipase could maintain rather good stability with proper alcohol adding strategy and the gradual reduction in biodiesel yield in the repeated uses resulted from the accumulation of by-product glycerol. The continuous running of lipase-mediated methanolysis of waste cooking oil was successfully realized at 30L reactor and a final methyl ester yield of over 90% could be obtained.