In silico prospection of microorganisms to produce polyhydroxyalkanoate from whey: Caulobacter segnis DSM 29236 as a suitable industrial strain

Polyhydroxyalkanoates (PHAs) are polyesters of microbial origin that can be synthesized by prokaryotes from noble sugars or lipids and from complex renewable substrates. They are an attractive alternative to conventional plastics because they are biodegradable and can be produced from renewable resources, such as the surplus of whey from dairy companies. After an in silico screening to search for ß-galactosidase and PHA polymerase genes, several bacteria were identified as potential PHA producers from whey based on their ability to hydrolyse lactose. Among them, Caulobacter segnis DSM 29236 was selected as a suitable strain to develop a process for whey surplus valorization. This microorganism accumulated 31.5% of cell dry weight (CDW) of poly(3-hydroxybutyrate) (PHB) with a titre of 1.5 g l⁻¹ in batch assays. Moreover, the strain accumulated 37% of CDW of PHB and 9.3 g l⁻¹ in fed-batch mode of operation. This study reveals this species as a PHA producer and experimentally validates the in silico bioprospecting strategy for selecting microorganisms for waste re-valorization.     

Poly(ethylene glycol)-mediated molar mass control of short-chain- and medium-chain-length poly(hydroxyalkanoates) from Pseudomonas oleovorans

Three strains of Pseudomonas oleovorans, a well known poly(hydroxyalkanoate) (PHA) producer, were tested for the ability to control PHA molar mass and end group structure by addition of poly(ethylene glycol) (PEG) to the fermentation medium. Each strain of P. oleovorans - NRRL B-14682 (B-14682), NRRL B-14683 (B-14683), and NRRL B-778 (B-778) - synthesized a different type of PHA from oleic acid when cultured under identical growth conditions. Strain B-14682 produced poly(3-hydroxybutyrate) (PHB), while B-14683 synthesized a medium-chain-length PHA ( mcl-PHA) with a repeat unit composition ranging from C4 to C14 and some mono-unsaturation in the C14 alkyl side chains. Strain B-778 synthesized a mixture of PHB (95 mol%) and mcl-PHA (5 mol%). The addition of 0.5% (v/v) PEG (M(n) =200 g/mol, PEG-200) to the fermentation broth of strains B-14682 and B-778 resulted in chain termination through esterification at the carboxyl terminus of the PHB with PEG chain segments, thus reducing the molar mass by 54% and 23%, respectively. The molar mass of the mcl-PHA produced by strains B-14683 and B-778 also showed a 34% and 47% reduction in the presence of PEG-200, respectively, but no evidence of esterification was present. PEG-400 (M(n) =400 g/mol) had a reduced effect on PHA molar mass. In fact, the molar masses of the mcl-PHA derived from strain B-14683 and both the PHB and mcl-PHA from B-778 were unchanged by PEG-400. In contrast, the PHB produced by B-14682 showed a 35% reduction in molar mass in the presence of PEG-400.     

Cloning and molecular organization of the polyhydroxyalkanoic acid synthase gene (phaC) of Ralstonia eutropha strain B5786

Class I polyhydroxyalkanoic acid (PHA) synthase gene (phaC) of Ralstonia eutropha strain B5786 was cloned and characterized. R. eutropha B5786 features the ability to synthesize multicomponent PHAs with short- and medium-chain-length monomers from simple carbohydrate substrate. A correlation was made between the molecular structure of PHA synthase and substrate specificity and the ability of strain-producers to accumulate PHAs of this or that structure. A strong similarity of PHA synthase of R. eutropha strain B5786 with PHA synthase of R. eutropha strain H16, which, as opposed to strain B5786, enables to incorporate medium chain length PHAs if hexanoate is used as carbon source, exhibited 99%. A correlation between the structure of PHA synthase of B5786 strain with synthases of microorganisms which synthesize short and medium chain length PHAs similarly to B5786 strain, showed an identity level from 26 to 41% (homology with synthase of Rhodospirillum rubrum makes 41%, Ectothiorhodospira shaposhnikovii makes 26%, Aeromonas punctata makes 40%, Thiococcus pfennigii makes 28%, Rhodococcus ruber makes 38%, and with PhaCl and PhaC2 synthases of Pseudomonas sp. 61–3 makes 34 and 37%, respectively). This allows for speaking about the absence of a direct connection between the molecular organization of PHA synthases and their functional abilities, namely, the ability to synthesize PHAs of a particular composition.     

Synthesis and characterization of poly(3-hydroxyalkanoates) from Brassica carinata oil with high content of erucic acid and from very long chain fatty acids

Pseudomonas aeruginosa produced medium chain length poly(3-hydroxyalkanoates) (mcl-PHAs) when grown on substrates containing very long chain fatty acids (VLCFA, C>20). Looking for low cost carbon sources, we tested Brassica carinata oil (erucic acid content 35-48%) as an intact triglyceride containing VLCFA. Oleic (C18:1), erucic (C22:1), and nervonic (C24:1) acids were also employed for mcl-PHA production as model substrates. The polymers obtained were analyzed by GC of methanolyzed samples, GPC, 1H and 13C NMR, ESI MS of partially pyrolyzed samples, and DSC. The repeating units of such polymers were saturated and unsaturated, with a higher content of the latter in the case of the PHA obtained from B. carinata oil. Statistical analysis of the ion intensity in the ESI mass spectra showed that the PHAs from pure fatty acids are random copolymers, while the PHA from B. carinata oil is either a pure polymer or a mixture of polymers. Weight-average molecular weight varied from ca. 56,000 g/mol for the PHA from B. carinata oil and oleic acid, to about 120,000 g/mol for those from erucic and nervonic acids. The PHAs from erucic and nervonic acids were partially crystalline, with rubbery characteristics and a melting point (Tm) of 50°C, while the PHAs from oleic acid and from B. carinata oil afforded totally amorphous materials, with glass transition temperatures (Tg) of -52°C and -47°C, respectively.     

The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

<Emphasis Type="Italic">Burkholderia xenovorans</Emphasis> LB400 possesses a functional polyhydroxyalkanoate anabolic pathway encoded by the <Emphasis Type="Italic">pha</Emphasis> genes and synthesizes poly(3-hydroxybutyrate) under nitrogen-limiting conditions

Polyhydroxyalkanoates (PHAs) are biodegradable bioplastics that are synthesized by diverse bacteria. In this study, the synthesis of PHAs by the model aromatic-degrading strain Burkholderia xenovorans LB400 was analyzed. Twelve pha genes including three copies of phaC and five copies of the phasin-coding phaP genes are distributed among the three LB400 replicons. The phaC1ABR gene cluster that encodes the enzymes of the PHA anabolic pathway is located at chromosome 1 of strain LB400. During the growth of strain LB400 on glucose under nitrogen limitation, the expression of the phaC1, phaA, phaP1, phaR, and phaZ genes was induced. Under nitrogen limitation, PHA accumulation in LB400 cells was observed by fluorescence microscopy after Nile Red staining. GC-MS analyses revealed that the PHA accumulated under nitrogen limitation was poly(3-hydroxybutyrate) (PHB). LB400 cells grown on glucose as the sole carbon source under nitrogen limitation accumulated 40?±?0.96% PHB of the cell dry weight, whereas no PHA was observed in cells grown in control medium. The functionality of the phaC1 gene from strain LB400 was further studied using heterologous expression in a Pseudomonas putida KT40C1ZC2 mutant strain derived from P. putida KT2440 that is unable to synthesize PHAs. Interestingly, KT40C1ZC2[pVNC1] cells that express the phaC1 gene from strain LB400 were able to synthesize PHB (33.5% dry weight). This study indicates that B. xenovorans LB400 possesses a functional PHA synthetic pathway that is encoded by the pha genes and is capable of synthesizing PHB.     

Review Degradation of microbial polyesters

Microbial polyhydroxyalkanoates (PHAs), one of the largest groups of thermoplastic polyesters are receiving much attention as biodegradable substitutes for non-degradable plastics. Poly(D-3-hydroxybutyrate) (PHB) is the most ubiquitous and most intensively studied PHA. Microorganisms degrading these polyesters are widely distributed in various environments. Although various PHB-degrading microorganisms and PHB depolymerases have been studied and characterized, there are still many groups of microorganisms and enzymes with varying properties awaiting various applications. Distributions of PHB-degrading microorganisms, factors affecting the biodegradability of PHB, and microbial and enzymatic degradation of PHB are discussed in this review. We also propose an application of a new isolated, thermophilic PHB-degrading microorganism, Streptomyces strain MG, for producing pure monomers of PHA and useful chemicals, including D-3-hydroxycarboxylic acids such as D-3-hydroxybutyric acid, by enzymatic degradation of PHB.     

Formation of short chain length/medium chain length polyhydroxyalkanoate copolymers by fatty acid beta-oxidation inhibited Ralstonia eutropha

Ralstonia eutropha has been considered as a bacterium, incorporating hydroxyalkanoates of less than six carbons only into polyhydroxyalkanoates (PHAs). Cells of the wild type cultivated with sodium octanoate as the carbon source in the presence of the fatty acid beta-oxidation inhibitor sodium acrylate synthesized PHAs composed of the medium chain length hydroxyalkanoates (3HA(MCL)) 3-hydroxyhexanoate (3HHx) and 3-hydroxyoctanoate (3HO) as well as of 3-hydroxybutyrate and 3-hydroxyproprionate as revealed by gas chromatography, (1)H NMR spectroscopy, and mass spectroscopy. The characterization of the polymer as a tetrapolymer was confirmed by differential solvent extraction and measurement of melting and glass transition temperature depression in the purified polymer compared to PHB. These data suggested that the R. eutropha PHA synthase is capable of incorporating longer chain substrates than suggested by previous in vitro studies. Furthermore, expression of the class II PHA synthase gene phaC1 from P. aeruginosa in R. eutropha resulted in the accumulation of PHAs consisting of 3HA(MCL) contributing about 3-5% to cellular dry weight. These PHAs were composed of nearly equal molar fractions of 3HO and 3-hydroxydecanoate (3HD) with traces of 3HHx. These data indicated that 3HA(MCL)-CoA thioesters were diverted from the fatty acid beta-oxidation pathway towards PHA biosynthesis in recombinant R. eutropha.     

Screening and identification of polyhydroxyalkanoates producing bacteria and biochemical characterization of their possible application

Polyhydroxyalkanoates (PHAs) accumulating bacteria were isolated under various selective conditions such as pH, salt concentrations and types of heavy metal. Fifty strains of bacterial isolates were found to belong to Bacillus, Proteus, Pseudomonas, Aeromonas, Alcaligenes and Chromobacterium, based on phenotypical features and genotypic investigation. Only twenty five bacterial isolates were selected and observed for the production of PHAs. Interestingly, bacteria belonging to Firmucutes Bacillus sp. produced a high amount of PHAs. The maximum PHAs were accumulated by B. licheniformis PHA 007 at 68.80% of dry cell weight (DCW). Pseudomonas sp., Aeromonas sp., Alcaligenes sp. and Chromobacterium sp. were recorded to produce a moderate amount of PHAs, varying from 10.00-44.32% of DCW. The enzymatic activity was preliminarily analyzed by the ratio of the clear zone diameter to colony diameter. Bacillus gave the highest ratio of hydrolysis zone which corresponds to the highest hydrolytic enzyme activities. Bacillus licheniformis PHA 007 had the highest lipase and protease activity at 2.1 and 5.1, respectively. However, the highest amylase activity was observed in Bacillus sp. PHA 023 at 1.4. Determination of metabolic characteristics was also investigated to check for their ability to consume a wide range of substrates. Bacillus, Aeromonas sp. and Alcaligenes sp. had great ability to utilize a variety of substrates. To decrease high PHA cost, different sources of cheap substrates were tested for the production of PHAs. Bacillus cereus PHA 008 gave the maximal yield of PHA production (64.09% of DCW) when cultivated in anaerobically treated POME. In addition, the accumulation of PHA copolymers such as 3-hydroxyvalerate and 3-hydroxyhexanoate was also observed in Bacillus and Pseudomomas sp. strain 012 and 045, respectively. Eight of the nine isolates accumulated a significant amount of PHAs when inexpensive carbon sources were used as substrates. Here it varied from 1.69% of DCW by B. licheniformis PHA 007 to 64.09% of DCW by B. cereus PHA 008.     

Isolation of a thermotolerant bacterium producing medium-chain-length polyhydroxyalkanoate

Aims:  The aim of this study was to isolate a thermotolerant micro‐organism that produces polyhydroxyalkanoates (PHAs) composed of medium‐chain‐length (mcl) HA units from a biodiesel fuel (BDF) by‐product as a carbon source. Methods and Results:  We successfully isolated a thermotolerant micro‐organism, strain SG4502, capable to accumulate mcl‐PHA from a BDF by‐product as a carbon source at a cultivation temperature of 45°C. The strain could also produce mcl‐PHA from acetate, octanoate and dodecanoate as sole carbon sources at cultivation temperatures up to 55°C. Taxonomic studies and 16S rRNA gene sequence analysis revealed that strain SG4502 was phylogenetically affiliated with species of the genus Pseudomonas. This study is the first report of PHA synthesis by a thermotolerant Pseudomonas. Conclusions:  A novel thermotolerant bacterium capable to accumulate mcl‐PHA from a BDF by‐product was successfully isolated. Significance and Impact of the Study:  A major issue regarding industrial production of microbial PHAs is their much higher production cost compared with conventional petrochemical‐based plastic materials. Especially significant are the cost of a fermentative substrate and the running cost to maintain a temperature suitable for microbial growth. Thus, strain SG4502, isolated in this study, which assimilates BDF by‐product and produces PHA at high temperature, would be very useful for practical application in industry.     

Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Peroxisomal polyhydroxyalkanoate biosynthesis is a promising strategy for bioplastic production in high biomass crops

Polyhydroxyalkanoates (PHAs) are bacterial carbon storage polymers with diverse plastic‐like properties. PHA biosynthesis in transgenic plants is being developed as a way to reduce the cost and increase the sustainability of industrial PHA production. The homopolymer polyhydroxybutyrate (PHB) is the simplest form of these biodegradable polyesters. Plant peroxisomes contain the substrate molecules and necessary reducing power for PHB biosynthesis, but peroxisomal PHB production has not been explored in whole soil‐grown transgenic plants to date. We generated transgenic sugarcane (Saccharum sp.) with the three‐enzyme Ralstonia eutropha PHA biosynthetic pathway targeted to peroxisomes. We also introduced the pathway into Arabidopsis thaliana, as a model system for studying and manipulating peroxisomal PHB production. PHB, at levels up to 1.6%–1.8% dry weight, accumulated in sugarcane leaves and A. thaliana seedlings, respectively. In sugarcane, PHB accumulated throughout most leaf cell types in both peroxisomes and vacuoles. A small percentage of total polymer was also identified as the copolymer poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in both plant species. No obvious deleterious effect was observed on plant growth because of peroxisomal PHA biosynthesis at these levels. This study highlights how using peroxisomal metabolism for PHA biosynthesis could significantly contribute to reaching commercial production levels of PHAs in crop plants.     

Synthesis of poly-3-hydroxyalkanoates is a common feature of fluorescent pseudomonads

The fluorescent pseudomonads are classified as a group, one characteristic of which is that they do not accumulate poly-3-hydroxybutyrate (PHB) during nutrient starvation in the presence of excess carbon source. In this paper we show that prototype strains from this subclass, such as Pseudomonas aeruginosa, Pseudomonas putida, and Pseudomonas fluorescens, do accumulate poly-3-hydroxyalkanoates (PHA) when grown on fatty acids. These PHAs are composed of medium-chain-length (C6 to C12) 3-hydroxy fatty acids. The ability to form these polyesters does not depend on the presence of plasmids. A specificity profile of the enzymes involved in the biosynthesis of PHA was determined by growing Pseudomonas oleovorans on fatty acids ranging from C4 to C18. In all cases, PHAs were formed which contained C6 to C12 3-hydroxy fatty acids, with a strong preference for 3-hydroxyoctanoate when Ceven fatty acids were supplied and 3-hydroxynonanoate when Codd fatty acids were the substrate. These results indicate that the formation of PHAs depends on a specific enzyme system which is distinct from that responsible for the synthesis of PHB. While the fluorescent pseudomonads are characterized by their inability to make PHB, they appear to share the capacity to produce PHAs. This characteristic may be helpful in classifying pseudomonads. It may also be useful in the optimization of PHA production for biopolymer applications.     

Physical properties of microbial polythioesters: characterization of poly(3-mercaptoalkanoates) synthesized by engineered Escherichia coli

Physical properties of chiral poly(thioesters), PTEs, prepared by engineered Escherichia coli, were examined by GPC, 13C CP/MAS solid-state NMR, X-ray diffraction, and thermal analysis. Microbial homopolymers of PTEs, poly(3-mercaptopropionate), PMP, and poly(3-mercaptovalerate), PMV, showed different solubility characteristics compared to poly(hydroxyalkanoates), PHAs. Generally, PTEs required higher temperatures for dissolution. Poly(3-mercaptobutyrate), PMB, and PMV dissolve in chloroform, and the molecular weight values were revealed by GPC as 176,000 and 165,000, respectively. The density values for PMP and PMB were 1.42 and 1.27 g/cm3, respectively. These values are similar to those for oxygen analogues. The NMR spectra for PTEs showed that carbonyl carbons are greatly shifted downfield by the sulfur atoms in the chain backbone compared to the PHA family. X-ray powder diffraction data indicated that PTEs are crystalline materials, but they do not crystallize as well as in the PHA family. The melting point, Tm, for PMP was 170 degrees C, which is about 100 degrees C higher than the equivalent oxygen analogue, poly(3-hydroxypropionate), PHP, and almost the same as that of bacterial poly(3-hydroxybutyrate), PHB. According to thermal analysis, only the PMP sample had enhanced heat stability, e.g., the decomposition temperature for PMP was 277 degrees C at 5% weight loss, whereas the values for PHP and PHB were 233 and 260 degrees C at the same weight loss, respectively.     

New insights in the formation of polyhydroxyalkanoate granules (carbonosomes) and novel functions of poly(3‐hydroxybutyrate)

The metabolism of polyhydroxybutyrate (PHB) and related polyhydroxyalkanoates (PHAs) has been investigated by many groups for about three decades, and good progress was obtained in understanding the mechanisms of biosynthesis and biodegradation of this class of storage molecules. However, the molecular events that happen at the onset of PHB synthesis and the details of the initiation of PHB/PHA granule formation, as well as the complex composition of the proteinaceous surface layer of PHB/PHA granules, have only recently come into the focus of research and were not reviewed yet. In this contribution, we summarize the progress in understanding the initiation and formation of the PHA granule complex at the example of Ralstonia eutropha H16 (model organism of PHB‐accumulating bacteria). Where appropriate, we include information on PHA granules of Pseudomonas putida as a representative species for medium‐chain‐length PHA‐accumulating bacteria. We suggest to replace the previous micelle mode of PHB granule formation by the Scaffold Model in which the PHB synthase initiation complex is bound to the bacterial nucleoid. In the second part, we highlight data on other forms of PHB: oligo‐PHB with ≈100 to 200 3‐hydroxybutyrate (3HB) units and covalently bound PHB (cPHB) are unrelated in function to storage PHB but are presumably present in all living organisms, and therefore must be of fundamental importance.     

Rapid genetic characterization of poly(hydroxyalkanoate) synthase and its applications

Microorganisms containing short-chain-length (scl-) or medium-chain-length (mcl-) poly(hydroxyalkanoates) (PHAs) are commonly screened by applying rapid staining methods using lipophilic reagents. These methods provide powerful means for general screening of organisms actively producing and accumulating PHAs. The Southern blot hybridization method additionally allows the identification of potential PHA-producing microorganisms. Polymerase chain reaction (PCR)-based detection methods further afford rapid and sensitive means to screen for PHA biosynthesis genes. Specific PCR assays had been developed for the simultaneous or individual detection of the class II mcl-PHA synthase genes of Pseudomonas. The amplicons (approximately 0.54 kb) can be directly sequenced or used as probes for hybridization studies. The sequence information can further be used to initiate chromosome walking for an eventual cloning of the complete PHA biosynthesis operon. In addition, the amplification pattern and sequence data can be used to differentiate subgroups of organisms, as demonstrated for P. corrugata and P. mediterranea. Other researchers reported PCR methods for the detection of scl-PHA synthase genes and those of Bacillus spp., thus greatly expanding the types of PHA synthase gene and the organisms that can be characterized by this approach. The vast sequence information obtainable through PCR-based studies of various PHA synthase operons should facilitate the identification or construction of new PHA synthases capable of synthesizing novel PHAs.     

Chemical modification of chlorinated microbial polyesters

Chlorination of microbial polyesters poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) was carried out by passing chlorine gas through their solutions. The chlorine contents in chlorinated PHB (PHB-Cl) and chlorinated PHO (PHO-Cl) were between 5.45 and 23.81 wt % and 28.09 and 39.09 wt %, respectively. Molecular weights of the chlorinated samples were in the range of between one-half to one-fourth of the original values because of hydrolysis during the chlorination process. Thermal properties of the PHO-Cl were dramatically changed with an increase in its glass transition (T(g) = 2 degrees C) and the melting transition (T(m)). The T(g) of PHB-Cl varied from -20 to 10 degrees C, and its T(m) decreased to 148 degrees C. The chlorinated poly(3-hydroxyalkanoate)s (PHA-Cl) were converted to their corresponding quaternary ammonium salts (PHA-N(+)R(3)), sodium sulfate salts (PHA-S), and phenyl derivatives (PHA-Ph). Cross-linked polymers were also formed by a Friedel-Crafts reaction between benzene and PHA-Cl. The modified PHO derivatives were characterized by (1)H NMR and (13)C NMR spectrometry, Fourier transform infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry techniques.     

Analysis of in vivo substrate specificity of the PHA synthase from Ralstonia eutropha: formation of novel copolyesters in recombinant Escherichia coli

In order to investigate the in vivo substrate specificity of the type I polyhydroxyalkanoate (PHA) synthase from Ralstonia eutropha, we functionally expressed the PHA synthase gene in various Escherichia coli mutants affected in fatty acid beta-oxidation and the wild-type. The PHA synthase gene was expressed either solely (pBHR70) or in addition to the R. eutropha genes encoding beta-ketothiolase and acetoacetyl-coenzyme A (CoA) reductase comprising the entire PHB operon (pBHR68) as well as in combination with the phaC1 gene (pBHR77) from Pseudomonas aeruginosa encoding type II PHA synthase. The fatty acid beta-oxidation route was employed to provide various 3-hydroxyacyl-CoA thioesters, depending on the carbon source, as in vivo substrate for the PHA synthase. In vivo PHA synthase activity was indicated by PHA accumulation and substrate specificity was revealed by analysis of the comonomer composition of the respective polyester. Only in recombinant E. coli fad mutants harboring plasmid pBHR68, the R. eutropha PHA synthase led to accumulation of poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) (poly(3HB-co-3HO)) and poly(3HB-co-3HO-co-3-hydroxydodecanoate (3HDD)), when octanoate and decanoate or dodecanoate were provided as carbon source, respectively. Coexpression of phaC1 from P. aeruginosa indicated and confirmed the provision of PHA precursor via the beta-oxidation pathway and led to the accumulation of a blend of two different PHAs in the respective E. coli strain. These data strongly suggested that R. eutropha PHA synthase accepts, besides the main substrate 3-hydroxybutyryl-CoA, also the CoA thioesters of 3HO and 3HDD.     

Biosynthesis of Poly[(R)-3-hydroxyalkanoate] Copolymers with Controlled Repeating Unit Compositions and Physical Properties

As applications for biodegradable and biologically produced poly[(R)-3-hydroxyalkanoates] (PHAs) grow into more specialized areas, the need to precisely control the repeating unit composition and consequently the physical properties of these polymers has become essential. A previous study reported our development of Escherichia coli LSBJ in order to produce PHA polymers composed of single repeating units ranging from 4 to 12 carbon atoms. This investigation expands the scope of our effort toward controlling the repeating unit composition of a variety of PHA copolymers. The sizes for the repeating units within the copolymers were modulated by feeding specific ratios of fatty acids with defined carbon lengths to E. coli LSBJ, which resulted in defined mole ratios for the repeating units. Various physical properties of the copolymers (including the Young's modulus, elongation to break, and glass-transition temperature) were shown to be strongly dependent upon the mole ratios of repeating units. This work demonstrates that copolymers of PHAs with repeating units from 4 to 12 carbons can be incorporated accurately to obtain any desired mole ratio within the PHA copolymers. Our methodology may thus be extended to generate tailor-made PHA copolymers with prescribed values for key sets of physical properties.     

Isolation of poly(3-hydroxybutyrate) (PHB)-degrading microorganisms and characterization of PHB-depolymerase from Arthrobacter sp. strain W6.

Microbial degraders of poly(3-hydroxybutyrate) (PHB) were isolated from soil. Arthrobacter sp. strain W6 used not only PHB as a carbon source, but also PHAs such as poly(3-hydroxybutyrate-co-[5%]3-hydroxyvalerate), poly(3-hydroxybutyrate-co-[14%]3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-[22%]3-hydroxyvalerate). PHB-depolymerase was purified to homogeneity from the culture broth of Arthrobacter sp. strain W6 by a procedure involving DEAE- and butyl-Toyopearl column chromatographies. The Mr of the enzyme was estimated to be about 47,000 by SDS-polyacrylamide gel electrophoresis. The enzyme was most active at pH 8.5 and 50 degrees C, and was inhibited by phenylmethylsulfonyl fluoride, Hg2+, Ag+, and Pb2+.