Structure and Function of the FeoB G-Domain from Methanococcus jannaschii

FeoB in bacteria and archaea is involved in the uptake of ferrous iron (Fe²⁺), an important cofactor in biological electron transfer and catalysis. Unlike any other known prokaryotic membrane protein, FeoB contains a GTP-binding domain at its N-terminus. We determined high-resolution X-ray structures of the FeoB G-domain from Methanococcus jannaschii with and without bound GDP or Mg²⁺-GppNHp. The G-domain forms the same dimer in all three structures, with the nucleotide-binding pockets at the dimer interface, as in the ATP-binding domain of ABC transporters. The G-domain follows the typical fold of nucleotide-binding proteins, with a β-strand inserted in switch I that becomes partially disordered upon GTP binding. Switch II does not contact the nucleotide directly and does not change its conformation in response to the bound nucleotide. Release of the nucleotide causes a rearrangement of loop L6, which we identified as the G5 region of FeoB. Together with the C-terminal helix, this loop may transmit the information about the nucleotide-bound state from the G-domain to the transmembrane region of FeoB.     

The crystal structure of a virus-like particle from the hyperthermophilic archaeon Pyrococcus furiosus provides insight into the evolution of viruses

Pyrococcus furiosus is a hyperthermophilic archaeal microorganism found near deep-sea thermal vents and its optimal growth temperature of 100 degrees C. Recently, a 38.8-kDa protein from P. furiosus DSM 3638 was isolated and characterized. Electron microscopy revealed that this protein aggregated as spheres of approximately 30 nm in diameter, which we designated P. furiosus virus-like particles (PfVs). X-ray crystallographic analysis at 3.6-A resolution revealed that each PfV consisted of 180 copies of the 38.8-kDa protein and retained T=3 icosahedral symmetry, as is often the case in spherical viruses. The total molecular mass of each particle was approximately 7 MDa. An examination of capsid structures suggested strong evolutionary links among PfV, tailed double-stranded DNA bacteriophages, and herpes viruses. The similar three-dimensional structures of the various coat proteins indicate that these viral capsids might have originated and evolved from a common ancestor. The structure of PfV provides a previously undescribed example of viral relationships across the three domains of life (Eukarya, Bacteria, and Archaea).     

A novel N-linked flagellar glycan from Methanococcus maripaludis

The archaea Methanococcus maripaludis strain Mm900 produces flagella that are glycosylated with an N-linked tetrasaccharide. Mass spectrometric analysis of flagellar tryptic peptides identified a number of tryptic glycopeptides carrying a glycan of mass 1036.4 Da, and fragmentation of the glycan oxonium ion indicated that the glycan was a tetrasaccharide. The glycan was purified, following extensive pronase digestion of flagellar filaments, by size-exclusion and anion-exchange chromatography. NMR spectroscopy revealed that the glycan had the following structure:Sug-4-β-ManNAc3NAmA6Thr-4-β-GlcNAc3NAcA-3-β-GalNAc-Asnwhere Sug is a novel monosaccharide unit, (5S)-2-acetamido-2,4-dideoxy-5-O-methyl-α-l-erythro-hexos-5-ulo-1,5-pyranose. This oligosaccharide has significant similarity to the oligosaccharide that was found previously in Methanococcus voltae.     

The Structure of the FnIII Tandem A77-A78 Points to a Periodically Conserved Architecture in the Myosin-Binding Region of Titin

Titin is a large intrasarcomeric protein that, among its many roles in muscle, is thought to modulate the in vivo assembly of the myosin motor filament. This is achieved through the molecular template properties of its A-band region, which is composed of fibronectin type III (FnIII) and immunoglobulin (Ig) domains organized into characteristic 7-domain (D-zone) and 11-domain (C-zone) superrepeats. Currently, there is little knowledge on the structural details of this region of titin. Here we report the conformational characterization of three FnIII tandems, A77-A78, A80-A82, and A84-A86, which are components of the representative fourth C-zone superrepeat. The structure of A77-A78 has been elucidated by X-ray crystallography to 1.65 Å resolution, while low-resolution models of A80-A82 and A84-A86 have been calculated using small-angle X-ray scattering. A77-A78 adopts an extended “up-down” domain arrangement, where domains are connected by a hydrophilic three-residue linker sequence. The linker is embedded in a rich network of polar contacts at the domain interface that results in a stiff molecular conformation. The models of A80-A82 and A84-A86, which contain hydrophobic six-residue-long interdomain linkers, equally showed elongated molecular shapes, but with slightly coiled or zigzagged conformations. Small-angle X-ray scattering data further suggested that the long linkers do not result in a noticeable increase in molecular flexibility but lead to semibent domain arrangements. Our findings indicate that the structural characteristics of FnIII tandems from A-band titin contrast markedly with those of poly-Ig tandems from the elastic I-band, which exhibit domain interfaces depleted of interactions and compliant conformations. Furthermore, the analysis of sequence conservation in FnIII domains from A-band titin points to the existence of conformationally defined interfaces at specific superrepeat positions, possibly leading to a periodic and locally ordered architecture supporting the molecular scaffold properties of this region of titin.     

Structure-Based and Random Mutagenesis Approaches Increase the Organophosphate-Degrading Activity of a Phosphotriesterase Homologue from Deinococcus radiodurans

An enzyme from the amidohydrolase family from Deinococcus radiodurans (Dr-OPH) with homology to phosphotriesterase has been shown to exhibit activity against both organophosphate (OP) and lactone compounds. We have characterized the physical properties of Dr-OPH and have found it to be a highly thermostable enzyme, remaining active after 3 h of incubation at 60 °C and withstanding incubation at temperatures up to 70 °C. In addition, it can withstand concentrations of at least 200 mg/mL. These properties make Dr-OPH a promising candidate for development in commercial applications. However, compared to the most widely studied OP-degrading enzyme, that from Pseudomonas diminuta, Dr-OPH has low hydrolytic activity against certain OP substrates. Therefore, we sought to improve the OP-degrading activity of Dr-OPH, specifically toward the pesticides ethyl and methyl paraoxon, using structure-based and random approaches. Site-directed mutagenesis, random mutagenesis, and site-saturation mutagenesis were utilized to increase the OP-degrading activity of Dr-OPH. Out of a screen of more than 30,000 potential mutants, a total of 26 mutant enzymes were purified and characterized kinetically. Crystal structures of w.t. Dr-OPH, of Dr-OPH in complex with a product analog, and of 7 mutant enzymes were determined to resolutions between 1.7 and 2.4 Å. Information from these structures directed the design and production of 4 additional mutants for analysis. In total, our mutagenesis efforts improved the catalytic activity of Dr-OPH toward ethyl and methyl paraoxon by 126- and 322-fold and raised the specificity for these two substrates by 557- and 183-fold, respectively. Our work highlights the importance of an iterative approach to mutagenesis, proving that large rate enhancements are achieved when mutations are made in already active mutants. In addition, the relationship between the kinetic parameters and the introduced mutations has allowed us to hypothesize on those factors most important for maintaining the structure and function of the enzyme.     

Crystal Structure of Methanocaldococcus jannaschii Trm4 Complexed with Sinefungin

tRNA:m⁵C methyltransferase Trm4 generates the modified nucleotide 5-methylcytidine in archaeal and eukaryotic tRNA molecules, using S-adenosyl-l-methionine (AdoMet) as methyl donor. Most archaea and eukaryotes possess several Trm4 homologs, including those related to diseases, while the archaeon Methanocaldococcus jannaschii has only one gene encoding a Trm4 homolog, MJ0026. The recombinant MJ0026 protein catalyzed AdoMet-dependent methyltransferase activity on tRNA in vitro and was shown to be the M. jannaschii Trm4. We determined the crystal structures of the substrate-free M. jannaschii Trm4 and its complex with sinefungin at 1.27 Å and 2.3 Å resolutions, respectively. This AdoMet analog is bound in a negatively charged pocket near helix α8. This helix can adopt two different conformations, thereby controlling the entry of AdoMet into the active site. Adjacent to the sinefungin-bound pocket, highly conserved residues form a large, positively charged surface, which seems to be suitable for tRNA binding. The structure explains the roles of several conserved residues that were reportedly involved in the enzymatic activity or stability of Trm4p from the yeast Saccharomyces cerevisiae. We also discuss previous genetic and biochemical data on human NSUN2/hTrm4/Misu and archaeal PAB1947 methyltransferase, based on the structure of M. jannaschii Trm4.     

Infrared spectroscopic study of the structural and functional properties of the Na/H antiporter MjNhaP1 from Methanococcus jannaschii

In this study, structural, functional, and mechanistic properties of the Na⁺/H⁺ antiporter MjNhaP1 from Methanococcus jannaschii were analyzed by infrared spectroscopic techniques. Na⁺/H⁺ antiporters are generally responsible for the regulation of cytoplasmic pH and Na⁺ concentration. MjNhaP1 is active in the pH range between pH 6 and pH 6.5; below and above it is inactive.The secondary structure analysis on the basis of ATR-IR spectra provides the first insights into the structural changes between inactive (pH 8) and active (pH 6) state of MjNhaP1. It results in decreased ordered structural elements with increasing the pH-value i.e. with inactivation of the protein. Analysis of temperature-dependent FTIR spectra indicates that MjNhaP1 in the active state exhibits a much higher unfolding temperature in the spectral region assigned to α-helical segments. In contrast, the temperature-induced structural changes for β-sheet structure are similar for inactive and active state. Consequently, this structure element is not the part of the activation region of the protein. The surface accessibility of the protein was analyzed by following the extent of H/D exchange. Due to higher content of unordered structural elements a higher accessibility for amide protons is observed for the inactive as compared to the active state of MjNhaP1. Altogether, the results present the active state of MjNhaP1 as the state with ordered structural elements which exhibit high thermal stability and increased hydrophobicity.     

Structural basis for the substrate specificity of PepA from Streptococcus pneumoniae, a dodecameric tetrahedral protease

Regulated cytosolic proteolysis is one of the key cellular processes ensuring proper functioning of a cell. M42 family proteases show a broad spectrum of substrate specificities, but the structural basis for such diversity of the substrate specificities is lagging behind biochemical data. Here we report the crystal structure of PepA from Streptococcus pneumoniae, a glutamyl aminopeptidase belonging to M42 family (SpPepA). We found that Arg-257 in the substrate binding pocket is strategically positioned so that Arg-257 can make electrostatic interactions with the acidic residue of a substrate at its N-terminus. Structural comparison of the substrate binding pocket of the M42 family proteases, along with the structure-based multiple sequence alignment, argues that the appropriate electrostatic interactions contribute to the selective substrate specificity of SpPepA.     

Structure based hyperthermostability of archaeal histone HPhA from Pyrococcus horikoshii

The histone protein HPhA from the hyperthermophilic archaeon Pyrococcus horikoshii, shows hyperthermostability, as required for optimal growth of the organism at 95 degrees C. The structure of recombinant P.horikoshii HPhA has been determined to 2.3A resolution by molecular replacement, and refined to R(work) and R(free) values of 20.7% and 27.3%, respectively. The HPhA monomer structure is characterized by the histone fold and assembles into a homodimer like other archaeal histones. There are four anions found in the dimer structure, giving rise to clues as to where DNA might bind. A detailed comparison of four known structures of archaeal histones, which evolve and exist under different temperatures, shows that the thermophilic archaeal histone HPhA has a larger hydrophobic contact area, an increased number of hydrogen bonds and a reduced solvent-accessible area. We also observe a unique network of tyrosine residues located at the crossover point of the two HPhA monomers, which locks them together and stabilizes the dimer. These factors together account for the increased thermal stability.     

Solution Structure of an Archaeal RNase P Binary Protein Complex: Formation of the 30-kDa Complex between Pyrococcus furiosus RPP21 and RPP29 Is Accompanied by Coupled Protein Folding and Highlights Critical Features for Protein-Protein and Protein-RNA Interactions

Ribonuclease P (RNase P) is a ribonucleoprotein (RNP) enzyme that catalyzes the Mg²⁺-dependent 5′ maturation of precursor tRNAs. In all domains of life, it is a ribozyme: the RNase P RNA (RPR) component has been demonstrated to be responsible for catalysis. However, the number of RNase P protein subunits (RPPs) varies from 1 in bacteria to 9 or 10 in eukarya. The archaeal RPR is associated with at least 4 RPPs, which function in pairs (RPP21-RPP29 and RPP30-POP5). We used solution NMR spectroscopy to determine the three-dimensional structure of the protein-protein complex comprising Pyrococcus furiosus RPP21 and RPP29. We found that the protein-protein interaction is characterized by coupled folding of secondary structural elements that participate in interface formation. In addition to detailing the intermolecular contacts that stabilize this 30-kDa binary complex, the structure identifies surfaces rich in conserved basic residues likely vital for recognition of the RPR and/or precursor tRNA. Furthermore, enzymatic footprinting experiments allowed us to localize the RPP21-RPP29 complex to the specificity domain of the RPR. These findings provide valuable new insights into mechanisms of RNP assembly and serve as important steps towards a three-dimensional model of this ancient RNP enzyme.     

Crystal structures of Pseudomonas putida esterase reveal the functional role of residues 187 and 287 in substrate binding and chiral recognition

A recombinant carboxylesterase (rPPE) from Pseudomonas putida ECU1011 was previously cloned and engineered to give a potential application for resolving chiral α-hydroxy acids including mandelic acids and derivatives. Two variants rPPE_W187H and rPPE_D287A showed a ∼100-fold increase in activity towards rac-2-acetoxy-2-(2′-chlorophenyl) acetate (rac-AcO-CPA), but rPPE_D287A had a significant decrease in enantioselectivity (E = 8.7) compared to rPPE_W187H and the wild-type rPPE (rPPE_WT) (E > 200). Here we report the crystal structures of rPPE_WT and rPPE_W187H, both by themselves and in complex with the substrate, to elucidate the structural basis of this phenomenon. An inactive mutation of nucleophile residue S159A was introduced to obtain the structure of rPPE_S159A/W187H complexed with (S)-AcO-CPA. The structural analysis reveals that the side chain of residue Asp287 in rPPE_WT would have a potential steric conflict with (S)-AcO-CPA when the substrate binds at the active site of the enzyme. However, the mutation W187H could facilitate the relocation of Asp287, while D287A directly eliminates the hindrance of Asp287, both of which offer sufficient space for the binding and hydrolysis of substrate. Moreover, Asp287 generates one site of the “three-point attachment model” as a hydrogen-bond donor that determines the excellent enantioselectivity of rPPE in chiral recognition, and D287A would obviously destroy the hydrogen bond and result in the low enantioselectivity of rPPE_D287A.     

The Crystal Structure of the Hinge Domain of the Escherichia coli Structural Maintenance of Chromosomes Protein MukB

MukB, a divergent structural maintenance of chromosomes (SMC) protein, is important for chromosomal segregation and condensation in γ-proteobacteria. MukB and canonical SMC proteins share a characteristic five-domain structure. Globular N- and C-terminal domains interact to form an ATP-binding cassette-like ATPase or “head” domain, which is connected to a smaller dimerization or “hinge” domain by a long, antiparallel coiled coil. In addition to mediating dimerization, this hinge region has been implicated in both conformational flexibility and dynamic protein-DNA interactions. We report here the first crystallographic model of the MukB hinge domain. This model also contains approximately 20% of the coiled-coil domain, including an unusual coiled-coil deviation. These results will facilitate studies to clarify the roles of both the hinge and the coiled-coil domains in MukB function.     

Crystal structures of monomeric actin bound to cytochalasin D

The fungal toxin cytochalasin D (CD) interferes with the normal dynamics of the actin cytoskeleton by binding to the barbed end of actin filaments. Despite its widespread use as a tool for studying actin-mediated processes, the exact location and nature of its binding to actin have not been previously determined. Here we describe two crystal structures of an expressed monomeric actin in complex with CD: one obtained by soaking preformed actin crystals with CD, and the other obtained by cocrystallization. The binding site for CD, in the hydrophobic cleft between actin subdomains 1 and 3, is the same in the two structures. Polar and hydrophobic contacts play equally important roles in CD binding, and six hydrogen bonds stabilize the actin-CD complex. Many unrelated actin-binding proteins and marine toxins target this cleft and the hydrophobic pocket at the front end of the cleft (viewing actin with subdomain 2 in the upper right corner). CD differs in that it binds to the back half of the cleft. The ability of CD to induce actin dimer formation and actin-catalyzed ATP hydrolysis may be related to its unique binding site and the necessity to fit its bulky macrocycle into this cleft. Contacts with residues lining this cleft appear to be crucial to capping and/or severing. The cocrystallized actin-CD structure also revealed changes in actin conformation. An ∼ 6° rotation of the smaller actin domain (subdomains 1 and 2) with respect to the larger domain (subdomains 3 and 4) results in small changes in crystal packing that allow the D-loop to adopt an extended loop structure instead of being disordered, as it is in most crystal structures of actin. We speculate that these changes represent a potential conformation that the actin monomer can adopt on the pathway to polymerization or in the filament.     

A New Mode of Dimerization of Allosteric Enzymes with ACT Domains Revealed by the Crystal Structure of the Aspartate Kinase from Cyanobacteria

Aspartate kinases (AKs) can be divided in two subhomology divisions, AKα and AKβ, depending on the presence of an extra sequence of about 60 amino acids, which is found only in the N-terminus of all AKα's. To date, the structures of AKα failed to provide a role for this additional N-terminal sequence. In this study, the structure of the AKβ from the Cyanobacteria Synechocystis reveals that this supplementary sequence is linked to the dimerization mode of AKs. Its absence in AKβ leads to the dimerization by the catalytic domain instead of involving the ACT domains [Pfam 01842; small regulatory domains initially found in AK, chorismate mutase and TyrA (prephenate dehydrogenase)] as observed in AKα. Thus, the structural analysis of the Synechocystis AKβ revealed a dimer with a novel architecture. The four ACT domains of each monomer interact together and do not make any contact with those of the second monomer. The enzyme is inhibited synergistically by threonine and lysine with the binding of threonine first. The interaction between ACT1 and ACT4 or between ACT2 and ACT3 generates a threonine binding site and a lysine binding site at each interface, making a total of eight regulatory sites per dimer and allowing a fine-tuning of the AK activity by the end products, threonine and lysine.     

How to Switch Off a Histidine Kinase: Crystal Structure of Geobacillus stearothermophilus KinB with the inhibitor Sda

Entry to sporulation in bacilli is governed by a histidine kinase phosphorelay, a variation of the predominant signal transduction mechanism in prokaryotes. Sda directly inhibits sporulation histidine kinases in response to DNA damage and replication defects. We determined a 2.0-Å-resolution X-ray crystal structure of the intact cytoplasmic catalytic core [comprising the dimerization and histidine phosphotransfer domain (DHp domain), connected to the ATP binding catalytic domain] of the Geobacillus stearothermophilus sporulation kinase KinB complexed with Sda. Structural and biochemical analyses reveal that Sda binds to the base of the DHp domain and prevents molecular transactions with the DHp domain to which it is bound by acting as a simple molecular barricade. Sda acts to sterically block communication between the catalytic domain and the DHp domain, which is required for autophosphorylation, as well as to sterically block communication between the response regulator Spo0F and the DHp domain, which is required for phosphotransfer and phosphatase activities.     

Effect of proline on thermal inactivation,denaturation and aggregation of glycogen phosphorylase b from rabbit skeletal muscle

It has been shown that the relatively low concentrations of proline (0.1 M) have a slight accelerating effect on thermal aggregation of glycogen phosphorylase b (Phb) from rabbit skeletal muscle registered by the accumulaton of the aggregated protein. The suppression of Phb aggregation at high proline concentrations is mainly due to the protective action of proline on the stage of unfolding of the Phb molecule. The enhancement of Phb stability in the presence of the high concentrations of proline was demonstrated by the data on differential scanning calorimetry, analytical ultracentrifugation and thermoinactivation kinetics. The construction of the protein aggregate size versus time plots allowed the acceleration of the stage of Phb aggregation in the presence of high concentrations of proline to be demonstrated. The obtained results are consistent with the predictions of the crowding theory.     

Crystal Structure of Metal-Dependent Allantoinase from Escherichia coli

Allantoinase acts as a key enzyme for the biogenesis and degradation of ureides by catalyzing the conversion of (S)-allantoin into allantoate, the final step in the ureide pathway. Despite limited sequence similarity, biochemical studies of the enzyme suggested that allantoinase belongs to the amidohydrolase family. In this study, the crystal structure of allantoinase from Escherichia coli was determined at 2.1 Å resolution. The enzyme consists of a homotetramer in which each monomer contains two domains: a pseudo-triosephosphate-isomerase barrel and a β-sheet. Analogous to other enzymes in the amidohydrolase family, allantoinase retains a binuclear metal center in the active site, embedded within the barrel fold. Structural analyses demonstrated that the metal ions in the active site ligate one hydroxide and six residues that are conserved among allantoinases from other organisms. Functional analyses showed that the presence of zinc in the metal center is essential for catalysis and enantioselectivity of substrate. Both the metal center and active site residues Asn94 and Ser317 play crucial roles in dictating enzyme activity. These structural and functional features are distinctively different from those of the metal-independent allantoinase, which was very recently identified.