Weak gel of chitin with ionic liquid, 1-allyl-3-methylimidazolium bromide

This paper reports the formation of weak gel of chitin with an ionic liquid, 1-allyl-3-methylimidazolium bromide (IL). When a mixture of 5% (w/w) chitin with IL was heated at 100 °C for 48 h, the clear liquid was obtained. The experimental process was observed by the CCD camera view and the SEM analysis. From a mixture of chitin with IL in the higher concentration (7%, w/w), a more viscous material, i.e., a gel-like material was obtained. The rheological evaluations showed that both 5% (w/w) and 7% (w/w) chitins with IL behaved as weak gels.     

The study of factors affecting the enzymatic hydrolysis of cellulose after ionic liquid pretreatment

Cellulose resource has got much attention as a promising replacement of fossil fuel. The hydrolysis of cellulose is the key step to chemical product and liquid transportation fuel. In this paper a serials of chloride, acetate, and formate based ionic liquids were used as solvents to dissolve cellulose. The cellulose regenerated from ILs was characterized by FTIR and X-ray powder diffraction. From the characterization and analysis, it was found that the original close and compact structure has changed a lot. After enzymatic hydrolysis, different kinds of ionic liquids (ILs) have different yields of the reducing sugar (TRS). They are 100%, 90.72%, and 88.92% from 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), 1-butyl-3-methylimidazolium formate ([BMIM][HCOO]) respectively after enzymatic hydrolysis at 50 °C for 5 h. The results indicated that the yields and the hydrolysis rates were improved apparently after ILs pretreatment comparing with the untreated substrates.     

Structural comparison and enhanced enzymatic hydrolysis of eucalyptus cellulose via pretreatment with different ionic liquids and catalysts

Eucalyptus was fractionated with mild alkaline process, and the obtained cellulose fraction was pretreated with various ionic liquids (ILs) to enhance the enzymatic saccharification. The results showed that the ILs used was efficient for the hydrolysis of cellulose, with the maximum total reducing sugars (TRS) yield over 80% at 50 °C. The regenerated cellulose substrate exhibited a significant improvement about 4.4–6.4 folds enhancement on saccharification rate during the first 4 h reaction. The crystallinity index (CrI) of cellulose via 1-ally-3-methylimidazolium ([AMIM]Cl) pretreatment was significantly decreased from 70.2% to 31.2%, resulting in structural change from cellulose I to cellulose II, which enabled the cellulase enzymes easier access to hydrolyze cellulose. However, 1-butyl-3methylimidazolium acesulfamate ([BMIM]Ace) pretreatment had no large effect on the CrI although a high conversion yield in glucose was obtained. The surface morphologies of the regenerated substrate which was pretreated via 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) and 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) showed more porous and incompact network of cellulose when compared with the untreated substrate. This result indicated a better accessibility by cellulases to the cellulose surface. Besides, a certain amount of catalysts such as MgCl₂ and H₂SO₄ could improve the rate of enzymatic saccharification.     

An ionic liquid as reaction media for radiation-induced grafting of thermosensitive poly (N-isopropylacrylamide) onto microcrystalline cellulose

This paper reports a homogeneous modification of microcrystalline cellulose (MCC) in ionic liquids via radiation-induced grafting. Thermosensitive poly (N-isopropylacrylamide) (PNIPAAm) was successfully grafted onto MCC in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) ionic liquid using γ-ray irradiation technique at room temperature. The grafting yield (GY) increased with dose up to 40 kGy, while decreased slightly with dose rate from 22 to 102 Gy/min. The results of TGA indicated that cellulose grafted PNIPAAm (cellulose-g-PNIPAAm) had higher thermal stability than that of ungrafted regenerated cellulose (reg-cellulose). The crystalline structure of original MCC was largely destroyed during the dissolution process according to the XRD profiles, and grafting PNIPAAm onto cellulose further decreased the intensity of crystallinity. SEM showed that reg-cellulose and cellulose-g-PNIPAAm films displayed dense and homogeneous morphology. Moreover, the resulting cellulose-g-PNIPAAm exhibited obvious thermal sensitivity with a lower critical solution temperature around 35 °C, which was observed from the swelling behavior in water at different temperatures.     

Dissolution of cellulose in phosphate-based ionic liquids

Two kinds of alkylimidazolium salts containing dimethyl phosphate or diethyl phosphate were obtained as room temperature ionic liquids synthesized by one step, and both of them have the ability to dissolve untreated cellulose. Especially, 1-ethyl-3-methylimidazolium diethylphosphonate ([EMIM]DEP) could obtain 4 wt% cellulose solution within 10 min under 90. The effects of dissolution temperature on cellulose dissolution time and degree of polymerization were investigated. As dissolution temperature increased, dissolution time was greatly reduced. Both the original and regenerated cellulose samples were characterized with wide-angle X-ray diffraction, thermogravimetric analysis and scanning electron micrograph. The results showed that the crystalline structure of cellulose was converted to cellulose II from cellulose I in native cellulose. It was also found that the regenerated cellulose had good thermal stability with [EMIM]DEP ionic liquid.     

Enhanced enzymatic saccharification of kenaf powder after ultrasonic pretreatment in ionic liquids at room temperature

This study demonstrates for the first time that the enzymatic hydrolysis of cellulose is drastically enhanced following ultrasonic pretreatment of lignocellulosic material in ionic liquids (ILs) when compared to conventional thermal pretreatment. Five types of ILs, 1-buthyl-3-methylimidazolium chloride (BmimCl), 1-allyl-3-methylimidazolium chloride (AmimCl), 1-ethyl-3-methylimidazolium chloride (EmimCl), 1-ethyl-3-methylimidazolium diethyl phosphate (EmimDep), and 1-ethyl-3-methylimidazolium acetate (EmimOAc) were tested. Cellulose saccharification ratio was about 20% for kenaf powders pretreated in BmimCl, AmimCl, EmimCl, and EmimDep by conventional heating at 110 °C for 120 min. Conversely, 60-95% of cellulose was hydrolyzed to glucose, subsequent to ultrasonic pretreatment in the same ILs for 120 min at 25 °C. The cellulose saccharification ratio of kenaf powder in EmimOAc was 86% after only 15 min of the ultrasonic pretreatment at 25 °C, compared to only 47% in that case of thermal pretreatment in the IL.     

A profile of the in vitro anti-tumor activity of imidazolium-based ionic liquids

The anti-cancer activity and cytotoxicity of imidazolium-based ionic liquids has been determined for the first time via NCI’s in vitro 60 human tumor cell lines. The preliminary SAR showed that the chain length of alkyl substitution at N-3 position of imidazole ring plays crucial role towards anti-tumor activity and cytotoxicity of these ionic liquids. The ionic liquids with alkyl substitution of C-12 chain length were found to be effective against all 60 tumor cell lines and show very low cytotoxicity in most of the cases. Further increase in chain length resulted in enhanced growth inhibition of tumor cell lines as well as high cytotoxicity. Interestingly, active compounds 1-dodecyl-3-methylimidazolium chloride (8), 1-dodecyl-3-methylimidazolium tetrafluoroborate (9), 1-hexadecyl-3-methylimidazoium chloride (10), 1-octadecyl-3-methylimidazolium chloride (11), 1-octadecyl-3-methylimidazolium hexafluorophosphate (12), 1-octadecyl-3-methylimidazolium bis(triflic)imide (13) and 1-octadecyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate (14) were highly active against leukemia cell lines, especially compounds 13 and 14 where the cytotoxicity was also very low as given by LC₅₀ >100 μM in all six leukemia cell lines.     

Role of solvent parameters in the regeneration of cellulose from ionic liquid solutions

The ionic liquids 1-ethyl-3-methylimidazolium acetate [emim]OAc, N,N,N,N-tetramethylguanidium propionate [TMGH]EtCO(2), and N,N,N,N-tetramethylguanidium acetate [TMGH]OAc, and the traditional cellulose solvent N-methylmorpholine N-oxide NMMO were characterized for their Kamlet-Taft (KT) values at several water contents and temperatures. For the ionic liquids and NMMO, thresholds of regeneration of cellulose solutions by water were determined using nephelometry and rheometry. Regeneration from wet IL was found to be asymmetric compared to dissolution into wet IL. KT parameters were found to remain almost constant at temperatures, between 20-100 °C, even at different water contents. Among the KT parameters, the β value was found to change most drastically, with an almost linear decrease upon addition of water. The ability of the mixtures to dissolve cellulose was best explained by the difference β-α (net basicity), rather than β alone. Regeneration of cellulose starts at thresholds values of approximately β < 0.8 (β-α < 0.35) and displayed four phases.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

Isolation and Characterisation of 1-Alkyl-3-Methylimidazolium Chloride Ionic Liquid-Tolerant and Biodegrading Marine Bacteria

The aim of this study was to isolate and identify marine-derived bacteria which exhibited high tolerance to, and an ability to biodegrade, 1-alkyl-3-methylimidazolium chloride ionic liquids. The salinity and hydrocarbon load of some marine environments may induce selective pressures which enhance the ability of microbes to grow in the presence of these liquid salts. The isolates obtained in this study generally showed a greater ability to grow in the presence of the selected ionic liquids compared to microorganisms described previously, with two marine-derived bacteria, Rhodococcus erythropolis and Brevibacterium sanguinis growing in concentrations exceeding 1 M 1-ethyl-3-methylimidazolium chloride. The ability of these bacteria to degrade the selected ionic liquids was assessed using High Performance Liquid Chromatography (HPLC), and three were shown to degrade the selected ionic liquids by up to 59% over a 63-day test period. These bacterial isolates represent excellent candidates for further potential applications in the bioremediation of ionic liquid-containing waste or following accidental environmental exposure.     

Swelling and dissolution of cellulose. Part IV: Free floating cotton and wood fibres in ionic liquids

The objective of this paper is to investigate if the swelling and dissolution mechanisms found for aqueous solvents are valid for non-aqueous ones. Three different ionic liquids were used and the swelling and dissolution mechanisms were investigated by optical methods. Native and enzymatically treated cellulose fibres (cotton and wood fibres) are dipped into three ionic liquids (1-N-butyl-3-methylimidazolium chloride ([C4mim]+Cl−)/DMSO, allylmethylimidazolium bromide ([Amim]+Br−) and butenylmethylimidazolium bromide ([Bmim]+Br−). ([C4mim]+Cl−)/DMSO shows a swelling of cellulose by ballooning and then dissolution. ([Amim]+Br−) and ([Bmim]+Br−) show a homogeneous swelling but no dissolution. The swelling and dissolution mechanisms of cellulose in ionic liquids are similar to those observed in aqueous solvents. It indicates that the swelling and dissolution mechanisms are entirely due to the way cellulose fibres are structured, not depending on the type of solvent. The quality of the solvent is giving the type of mechanism.     

Separation of ionic liquid [Mmim][DMP] and glucose from enzymatic hydrolysis mixture of cellulose using alumina column chromatography

Pretreatment of cellulose with ionic liquids (ILs) can improve the efficiency of the hydrolysis by increasing the surface area of the substrates accessible to solvents and cellulases. However, the IL methods are facing challenges to separate the hydrolyzed sugar products as well as the renewable ILs from the complex hydrolysis mixtures. In this study, an alumina column chromatography (ACC) method was developed for the separation of hydrophilic IL N-methyl-N-methylimidazolium dimethyl phosphate ([Mmim][DMP]) and glucose, which was the main ingredient of the monosaccharide hydrolyzate. The processing parameters involved in ACC separation were investigated in detail. Our results showed that the recovery yields of [Mmim][DMP] and glucose can reach up to 93.38% and 90.14%, respectively, under the optimized parameters: the sampling ratio of 1:20 between the applied sample volume and the bed volume of the column; a gradient elution using methanol (100%, 150 ml) and then water (170 ml) as eluents with 1 ml/min flow rate. The recovered [Mmim][DMP] showed qualified property and was effective in a new hydrolysis reaction. In addition, scale-up ACC separations were successfully done with satisfied separation performance. The results indicated that the ACC is one of the available methods for the separation of ILs and monosaccharides from the hydrolysis mixtures.     

Elucidation of the effect of ionic liquid pretreatment on rice husk via structural analyses

ABSTRACT: BACKGROUND: In the present study, three ionic liquids, namely 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), and 1-ethyl-3-methylimidazolium diethyl phosphate ([EMIM]DEP), were used to partially dissolve rice husk, after which the cellulose were regenerated by the addition of water. The aim of the investigation is to examine the implications of the ionic liquid pretreatments on rice husk composition and structure. RESULTS: From the attenuated total reflectance Fourier transform-infrared (ATR FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results, the regenerated cellulose were more amorphous, less crystalline, and possessed higher structural disruption compared with untreated rice husk. The major component of regenerated cellulose from [BMIM]Cl and [EMIM]DEP pretreatments was cellulose-rich material, while cellulose regenerated from [EMIM]OAc was a matrix of cellulose and lignin. Cellulose regenerated from ionic pretreatments could be saccharified via enzymatic hydrolysis, and resulted in relatively high reducing sugars yields, whereas enzymatic hydrolysis of untreated rice husk did not yield reducing sugars. Rice husk residues generated from the ionic liquid pretreatments had similar chemical composition and amorphousity to that of untreated rice husk, but with varying extent of surface disruption and swelling. CONCLUSIONS: The structural architecture of the regenerated cellulose and rice husk residues showed that they could be used for subsequent fermentation or derivation of cellulosic compounds. Therefore, ionic liquid pretreatment is an alternative in the pretreatment of lignocellulosic biomass in addition to the conventional chemical pretreatments.     

Cytochrome c dissolved in 1-allyl-3-methylimidazolium chloride type ionic liquid undergoes a quasi-reversible redox reaction up to 140°C

Solubility of cytochrome c, a typical heme protein, in a various ionic liquids has been analyzed. The solubility has been discussed with polarity parameters of the ionic liquids. Both hydrogen bond basicity and dipolarity/polarizability of the ionic liquids were confirmed to be influential factors to control the solubilization of cytochrome c. Polar ionic liquids such as 1-butyl-3-methylimidazolium chloride and 1-allyl-3-methylimidazolium chloride solubilized cytochrome c at 80°C, and the dissolved cytochrome c was found to keep its redox activity in these ionic liquids. The redox response of the dissolved cytochrome c was detected in 1-allyl-3-methylimidazolium chloride up to 140°C.     

Superior solubility of polysaccharides in low viscosity, polar, and halogen-free 1,3-dialkylimidazolium formates

We successfully prepared low viscosity, polar, and halogen-free ionic liquids as potential solvents for a wide range of polysaccharides. A series of 1,3-dialkylimidazolium formates were produced as liquids having strong hydrogen bond acceptability. These formates had significantly lower viscosity than previously reported polar ionic liquids, in particular 1-allyl-3-methylimidazolium formate (viscosity 66cP at 25 degrees C) and 1-allyl-3-ethylimidazolium formate (67cP at 25 degrees C). Because of their strong hydrogen bond ability, various polysaccharides including amylose and (scarcely soluble) cellulose were dissolved in high concentrations under mild condition.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Over-stabilization of Candida antarctica lipase B by ionic liquids in ester synthesis

Four different ionic liquids, based on dialkylimidazolium cations associated with perfluorinated and bis(trifluoromethyl)sulfonyl amide anions were used as reaction media for butyl butyrate synthesis catalyzed by free Candida antarctica lipase B at 2% (v/v) water content and 50 °C. Lipase had enhanced synthetic activity in all ionic liquids in comparison with two organic solvents (hexane, and 1-butanol), the enhanced activity being related to the increase in polarity of ionic liquids. The continuous operation of lipase with all the assayed ionic liquids showed over-stabilization of the enzyme. The reuse of free lipase in 1-butyl-3-methylimidazolium hexafluorophosphate in continuous operation cycles showed a half-life time 2300 times greater than that observed when the enzyme was incubated in the absence of substrate (3.2 h), and a selectivity higher than 90%.     

Enzymatic selective acylation of glycosides in ionic liquids: significantly enhanced reactivity and regioselectivity

The enzymatic selective acylations of carbohydrates in ionic liquids were explored in both organic solvents and ionic liquids to see any significant differences in terms of reactivity and regioselectivity between two different classes of reaction media. Monoprotected glycosides (methyl-6-O-trityl-glucosides and galactosides) were chosen as the substrates with Candida rugosa lipase as an acylation enzyme. Two organic solvents, THF and chloroform, and two ionic liquids, [BMIM]⁺PF₆⁻ ([BMIM]⁺ = 1-butyl-3-methylimidazolium) and [MOEMIM]⁺PF₆⁻ ([MOEMIM]⁺ = 1-methoxyethyl-3-methylimidazolium), were employed as reaction media. The enzymatic reactions were performed in the presence of vinyl acetate at room temperature. It was observed that the reactions in ionic liquids took place more rapidly and more selectively than those in conventional organic solvents.     

Conversion of hexose into 5-hydroxymethylfurfural in imidazolium ionic liquids with and without a catalyst

Conversion of fructose and glucose into 5-hydroxymethylfurfural (HMF) was investigated in various imidazolium ionic liquids, including 1-butyl-3-methylimidazolium chloride (BmimCl), 1-hexyl-3-methylimidazolium chloride (HmimCl), 1-octyl-3-methylimidazolium chloride (OmimCl), 1-benzyl-3-methylimidazolium chloride (BemimCl), 1-Butyl-2,3-dimethylimidazolium chloride (BdmimCl), and 1-butyl-3-methylimidazolium p-toluenesulfonate (BmimPS). The acidic C-2 hydrogen of imidazolium cations was shown to play a major role in the dehydration of fructose in the absence of a catalyst, such as sulfuric acid or CrCl₃. Both the alkyl groups of imidazolium cations and the type of anions affected the reactivity of the carbohydrates. Although, except BmimCl and BemimCl, other four ionic liquids could only achieve not more than 25% HMF yields without an additional catalyst, 60–80% HMF yields were achieved in HmimCl, BdmimCl, and BmimPS in the presence of sulfuric acid or CrCl₃ in sufficient quantities.