Uncoupling substrate transport from ATP hydrolysis in the Escherichia coli maltose transporter

Members of the ATP-binding cassette superfamily couple the energy from ATP hydrolysis to the active transport of substrates across the membrane. The maltose transporter, a well characterized model system, consists of a periplasmic maltose-binding protein (MBP) and a multisubunit membrane transporter, MalFGK(2). On the basis of the structure of the MBP-MalFGK(2) complex in an outward-facing conformation (Oldham, M. L., Khare, D., Quiocho, F. A., Davidson, A. L., and Chen, J. (2007) Nature 450, 515-521), we identified two mutants in transmembrane domains MalF and MalG that generated futile cycling; although interaction with MBP stimulated the ATPase activity of the transporter, maltose was not transported. Both mutants appeared to disrupt the normal transfer of maltose from MBP to MalFGK(2). In the first case, substitution of aspartate for glycine in the maltose-binding site of MalF likely generated a futile cycle by preventing maltose from binding to MalFGK(2) during the catalytic cycle. In the second case, a four-residue deletion of a periplasmic loop of MalG limited its reach into the maltose-binding pocket of MBP, allowing maltose to remain associated with MBP during the catalytic cycle. Retention of maltose in the MBP binding site in the deletion mutant, as well as insertion of this loop into the binding site in the wild type, was detected by EPR as a change in mobility of a nitroxide spin label positioned near the maltose-binding pocket of MBP.     

Unliganded maltose-binding protein triggers lactose transport in an Escherichia coli mutant with an alteration in the maltose transport system.

Escherichia coli accumulates malto-oligosaccharides by the maltose transport system, which is a member of the ATP-binding-cassette (ABC) superfamily of transport systems. The proteins of this system are LamB in the outer membrane, maltose-binding protein (MBP) in the periplasm, and the proteins of the inner membrane complex (MalFGK2), composed of one MalF, one MalG, and two MalK subunits. Substrate specificity is determined primarily by the periplasmic component, MBP. However, several studies of the maltose transport system as well as other members of the ABC transporter superfamily have suggested that the integral inner membrane components MalF and MalG may play an important role in determining the specificity of the system. We show here that residue L334 in the fifth transmembrane helix of MalF plays an important role in determining the substrate specificity of the system. A leucine-to-tryptophan alteration at this position (L334W) results in the ability to transport lactose in a saturable manner. This mutant requires functional MalK-ATPase activity and the presence of MBP, even though MBP is incapable of binding lactose. The requirement for MBP confirms that unliganded MBP interacts with the inner membrane MalFGK2 complex and that MBP plays a crucial role in triggering the transport process.     

Structure-function study of MalF protein by random mutagenesis

MalF is one of the two integral inner membrane proteins of the maltose-maltodextrin transport system. To identify functional regions in this protein, we characterized a collection of malF mutants obtained by random mutagenesis. We analyzed their growth on maltose and maltodextrins, the steady-state levels and subcellular localization of the mutant proteins, and the subcellular localization of MalK. Only 2 of the 21 MalF mutant proteins allowed growth on maltose and maltodextrins. Most mutations resulting in immunodetectable proteins mapped to hydrophilic domains, indicating that insertions affecting transmembrane segments gave rise to unstable or lethal proteins. All MalF mutant proteins, even those C-terminally truncated or with large N-terminal deletions, were inserted into the cytoplasmic membrane. Having identified mutations leading to reduced steady-state level, to partial mislocation, and/or to misfolding, we were able to assign to some regions of MalF a role in the assembly of the MalFGK2 complex and/or in the transport mechanism.     

Heat shock induction by a misassembled cytoplasmic membrane protein complex in Escherichia coli

We analysed the effects of the overproduction of parts or all of a multisubunit ATP-binding cassette (ABC) transporter, the MalFGK2 complex, involved in the uptake of maltose and maltodextrins in Escherichia coli . We found that production of the MalF protein alone was inducing the phtrA promoter, which is under the control of a recently discovered sigma factor, σ²⁴, involved in the response to extracytoplasmic stresses. The production level, stability and localization of MalF were not altered when produced without its partners, suggesting that the protein was correctly inserted in the membrane. Our results indicate that a large periplasmic loop located between the third and fourth transmembrane segment of MalF, the L3 loop, is responsible for phtrA induction: (i) deleted MalF proteins with no L3 loop or with a L3 loop lacking 120 amino acids do not induce the phtrA promoter; (ii) the export to the periplasm of the L3 loop alone or fused to MalE induces the phtrA promoter. Moreover, the proteolytic sensitivity of MalF is different when it is produced alone and when MalF and MalG are produced together, suggesting a change in the conformation and/or accessibility of MalF. These results suggest that some inner membrane proteins can be sensed outside the cytoplasm by a quality control apparatus or by the export machinery. Moreover, the observation of the phtrA induction by MalF could be a useful new tool for studying the insertion and assembly of the MalFGK2 complex.     

Evidence for multiple pathways in the assembly of the Escherichia coli maltose transport complex

We used the maltose transport complex MalFGK2 of the Escherichia coli cytoplasmic membrane as a model for the study of the assembly of hetero-oligomeric membrane protein complexes. Analysis of other membrane protein complexes has led to a general model in which a unique, ordered pathway is followed from subunit monomers to a final oligomeric structure. In contrast, the studies reported here point to a fundamentally different mode for assembly of this transporter. Using co-immunoprecipitation and quantification of interacting partners, we found that all subunits of the maltose transport complex efficiently form heteromeric complexes in vivo. The pairwise complexes were stable over time, suggesting that they all represent assembly intermediates for the final MalFGK2 transporter. These results indicate that several paths can lead to assembly of this oligomer. We also characterized MalF and MalG mutants that caused reduced association between some or all of the subunits of the complex with this assay. The mutant analysis highlights some important motifs for subunit contacts and suggests that the promiscuous interactions between these Mal proteins contribute to the efficiency of complex assembly. The behaviors of the wild type and mutant proteins in the co-immunoprecipitations support a model of multiple assembly pathways for this complex.     

MalK forms a dimer independent of its assembly into the MalFGK2 ATP-binding cassette transporter of Escherichia coli

The maltose transport complex (MTC) is a member of the ATP-binding cassette superfamily of membrane transport proteins and is a model for understanding the folding and assembly of hetero-oligomeric membrane protein complexes. The MTC is made up of two integral membrane proteins, MalF and MalG, and a peripheral membrane protein, MalK. These proteins associate with a stoichiometry of 1:1:2 to form the complex MalFGK2. In our studies of the oligomerization of this complex, we have shown that the ATP-binding component, MalK, forms a dimer in the absence of MalF and MalG. Epitope-tagged MalK coimmunoprecipitated with wild-type MalK, indicating that the MalK protein forms an oligomer. The relative amounts of tagged and wild-type MalK that were present in the whole cell extracts and in the immunoprecipitated complexes show that the MalK oligomer is a dimer. These hetero-oligomers can also be formed in vitro by mixing two extracts, each containing either tagged or wild-type MalK. The dimerization of MalK was also demonstrated in vivo using the bacteriophage lambda repressor fusion assay. The formation of a MalK dimer in the absence of MalF and MalG may represent an initial step in the assembly pathway of the MTC.     

ATP modulates subunit-subunit interactions in an ATP-binding cassette transporter (MalFGK2) determined by site-directed chemical cross-linking

The binding protein-dependent maltose transport system of enterobacteria (MalFGK(2)), a member of the ATP-binding cassette (ABC) transporter superfamily, is composed of two integral membrane proteins, MalF and MalG, and of two copies of an ATPase subunit, MalK, which hydrolyze ATP, thus energizing the translocation process. In addition, an extracellular (periplasmic) substrate-binding protein (MalE) is required for activity. Ligand translocation and ATP hydrolysis are dependent on a signaling mechanism originating from the binding protein and traveling through MalF/MalG. Thus, subunit-subunit interactions in the complex are crucial to the transport process but the chemical nature of residues involved is poorly understood. We have investigated the proximity of residues in a conserved sequence ("EAA" loop) of MalF and MalG to residues in a helical segment of the MalK subunits by means of site-directed chemical cross-linking. To this end, single cysteine residues were introduced into each subunit at several positions and the respective malF and malG alleles were individually co-expressed with each of the malK alleles. Membrane vesicles were prepared from those double mutants that contained a functional transporter in vivo and treated with Cu(1,10-phenanthroline)(2)SO(4) or bifunctional cross-linkers. The results suggest that residues Ala-85, Lys-106, Val-114, and Val-117 in the helical segment of MalK, to different extents, participate in constitution of asymmetric interaction sites with the EAA loops of MalF and MalG. Furthermore, both MalK monomers in the complex are in close contact to each other through Ala-85 and Lys-106. These interactions are strongly modulated by MgATP, indicating a structural rearrangement of the subunits during the transport cycle. These data are discussed with respect to current transport models.     

Maltose-binding protein is open in the catalytic transition state for ATP hydrolysis during maltose transport

The maltose transport complex of Escherichia coli, a member of the ATP-binding cassette superfamily, mediates the high affinity uptake of maltose at the expense of ATP. The membrane-associated transporter consists of two transmembrane subunits, MalF and MalG, and two copies of the cytoplasmic ATP-binding cassette subunit, MalK. Maltose-binding protein (MBP), a soluble periplasmic protein, delivers maltose to the MalFGK(2) transporter and stimulates hydrolysis by the transporter. Site-directed spin labeling electron paramagnetic resonance spectroscopy is used to monitor binding of MBP to MalFGK(2) and conformational changes in MBP as it interacts with MalFGK(2). Cysteine residues and spin labels have been introduced into the two lobes of MBP so that spin-spin interaction will report on ligand-induced closure of the protein (Hall, J. A., Thorgeirsson, T. E., Liu, J., Shin, Y. K., and Nikaido, H. (1997) J. Biol. Chem. 272, 17610-17614). At least two different modes of interaction between MBP and MalFGK(2) were detected. Binding of MBP to MalFGK(2) in the absence of ATP resulted in a decrease in motion of spin label at position 41 in the C-terminal domain of MBP. In a vanadate-trapped transition state intermediate, all free MBP became tightly bound to MalFGK(2), spin label in both lobes became completely immobilized, and spin-spin interactions were lost, suggesting that MBP was in an open conformation. Binding of non-hydrolyzable MgATP analogs or ATP in the absence of Mg is sufficient to stabilize a complex of open MBP and MalFGK(2). Taken together, these data suggest that closure of the MalK dimer interface coincides with opening of MBP and maltose release to the transporter.     

Sequence–function relationships in MalG, an inner membrane protein from the maltose transport system in Escherichia coli

The maIG gene encodes a hydrophobic cytoplasmic membrane protein which is required for the energy-dependent transport of maltose and maltodextrins in Escherichia coli. The MalG protein, together with MalF and MalK proteins, forms a multimeric complex in the membrane consisting of two MalK subunits for each MalF and MalG subunit. Fifteen mutations have been isolated in malG by random linker insertion mutagenesis. Two regions essential for maltose transport have been identified. In particular, a hydro philic region containing the peptidic motif EAA—G———I-LP, highly conserved among inner membrane proteins from binding protein-dependent transport systems, is essential for maltose transport. The results also show that several regions of MalG are not essential for function. A region (residues 30–50) encompassing the first predicted transmembrane segment and the first periplasmic loop in MalG may be modified extensively with little effect on maltose transport and no effect on the stability and the localization of the protein. A region located at the middle of the protein (residues 153–157) is not essential for the function of the protein. A region, essential for maltodextrin utilization but not for maltose transport, has been identified near the C-terminus of the protein.     

MBP-MalFGK2相互作用动力学:ABC转运蛋白的模型研究

本文主要描述了麦芽糖结合蛋白(MBP)和属于ATP结合盒式蛋白(ABC)家族的麦芽糖转运蛋白复合物MalFGK2的相互作用。通过基因、结构和生化分析可知,MBP和MalFGK2以不同构象进行相互作用。在这个转运系统中,MBP与麦芽糖结合,并与MalFGK2发生相互作用,从而将麦芽糖从胞外转运至胞内,但由于MBP和MalFGK2都有多种构象,所以它们的相互作用很复杂。相互作用机理模型最重要的特点是结合配体的MBP,通过稳定MalFGK2的高能量构象来启动依赖ATP的麦芽糖转运过程。麦芽糖转运蛋白机理模型表明,ABC型转运系统利用外周结合蛋白,其转运过程基本上是不可逆的。     

Substrate transport activation is mediated through second periplasmic loop of transmembrane protein MalF in maltose transport complex of Escherichia coli

In a recent study we described the second periplasmic loop P2 of the transmembrane protein MalF (MalF-P2) of the maltose ATP-binding cassette transporter (MalFGK(2)-E) as an important element in the recognition of substrate by the maltose-binding protein MalE. In this study, we focus on MalE and find that MalE undergoes a structural rearrangement after addition of MalF-P2. Analysis of residual dipolar couplings (RDCs) shows that binding of MalF-P2 induces a semiopen state of MalE in the presence and absence of maltose, whereas maltose is retained in the binding pocket. These data are in agreement with paramagnetic relaxation enhancement experiments. After addition of MalF-P2, an increased solvent accessibility for residues in the vicinity of the maltose-binding site of MalE is observed. MalF-P2 is thus not only responsible for substrate recognition, but also directly involved in activation of substrate transport. The observation that substrate-bound and substrate-free MalE in the presence of MalF-P2 adopts a similar semiopen state hints at the origin of the futile ATP hydrolysis of MalFGK(2)-E.     

Proper insertion of a complex membrane protein in the absence of its amino-terminal export signal

The MalF protein spans the Escherichia coli cytoplasmic membrane eight times. Deletion of the first transmembrane stretch of MalF, which acts as an export signal, results in a truncated protein that still exhibits high levels of maltose transport activity. These and additional results indicate that the orientation of a membrane protein is not determined by the amino-terminal export signal, topological information is distributed throughout the MalF protein, and insertion of a protein into the cytoplasmic membrane can occur nonsequentially.     

Purification and characterization of the membrane-associated components of the maltose transport system from Escherichia coli

Maltose is transported across the cytoplasmic membrane of Escherichia coli by a binding protein-dependent transport system. The three membrane-associated components of the transport system, the MalK, MalF, and MalG proteins, have been solubilized from the membrane and maltose transport activity has been reconstituted in proteoliposome vesicles (Davidson, A. L., and Nikaido, H. (1990) J. Biol. Chem. 265, 4254-4260). A modification of the reconstitution technique is presented which permits reconstitution from the detergent dodecyl maltoside. Utilizing reconstitution of maltose transport as an assay, we have purified these proteins in the presence of n-dodecyl-beta-D-maltoside. The purified proteins catalyze both maltose transport activity and ATP hydrolysis. In all experiments, the MalF, MalG, and MalK proteins behaved as a multiprotein complex; all three proteins were immunoprecipitated using antibody prepared against MalF, and they copurified, eluting from a gel filtration column between markers of Mr 160,000 and 200,000. Each complex contains two MalK, one MalF, and one MalG proteins, providing two putative sites for ATP hydrolysis. Chemical cross-linking detected specific interactions between MalF and MalG and between MalF and MalK.     

Purification and characterization of the heterologously expressed trehalose/maltose ABC transporter complex of the hyperthermophilic archaeon Thermococcus litoralis.

We report the purification of the maltose/trehalose transporter complex MalFGK of the hyperthermophilic archaeon Thermococcus litoralis. The complex was expressed in Escherichia coli, solubilized in dodecyl maltoside and purified with the aid of a histidine tag on one of the membrane proteins. One hundred grams of cells yielded 3 mg of pure complex. The final product showed ATPase activity at 70 degrees C and was soluble at low detergent concentration. ATPase activity was not due to dissociation of the MalK subunit from the integral membrane proteins MalF and MalG but could not be further stimulated by trehalose/maltose binding protein (TMBP), be it the native protein as isolated from T. litoralis or the soluble engineered protein. The purified native TMBP was identified as a glycoprotein.     

Nanodiscs and SILAC-based mass spectrometry to identify a membrane protein interactome

Integral membrane proteins are challenging to work with biochemically given their insoluble nature; the nanodisc circumvents the difficulty by stabilizing them in small patches of lipid bilayer. Here, we show that nanodiscs combined with SILAC-based quantitative proteomics can be used to identify the soluble interacting partners of virtually any membrane protein. As a proof of principle, we applied the method to the bacterial SecYEG protein-conducting channel, the maltose transporter MalFGK(2) and the membrane integrase YidC. In contrast to the detergent micelles, which tend to destabilize interactions, the nanodisc was able to capture out of a complex whole cell extract the proteins SecA, Syd, and MalE with a high degree of confidence and specificity. The method was sensitive enough to isolate these interactors as a function of the lipid composition in the disc and the culture conditions. In agreement with a previous photo-cross linking analysis, YidC did not show any high-affinity interactions with cytosolic or periplasmic proteins. These three examples illustrate the utility of nanoscale lipid bilayers to identify the soluble peripheral partners of proteins intergrated in the lipid bilayer.     

The ABC transporter MalFGK(2) sequesters the MalT transcription factor at the membrane in the absence of cognate substrate

MalK, the cytoplasmic component of the maltose ABC transporter from Escherichia coli is known to control negatively the activity of MalT, the activator of the maltose regulon, through complex formation. Here we further investigate this regulatory process by monitoring MalT activity and performing fluorescence microscopy analyses under various conditions. We establish that, under physiological conditions, the molecular entity that interacts with MalT is not free MalK, but the maltose transporter, MalFGK(2) , which sequesters MalT to the membrane. Furthermore, we provide compelling evidence that the transporter's ability to bind MalT is not constitutive, but strongly diminished when MalFGK(2) is engaged in sugar transport. Notably, the outward-facing transporter, i.e. the catalytic intermediate, is ineffective in inhibiting MalT compared to the inward-facing state, i.e. the resting form. Analyses of available genetic and structural data suggest how the interaction between one inactive MalT molecule and MalFGK(2) would be sensitive to the transporter state, thereby allowing MalT release upon maltose entrance. A related mechanism may underpin signalling by other ABC transporters.     

Different regions of the nonconserved large periplasmic domain of Escherichia coli YidC are involved in the SecF interaction and membrane insertase activity

The YidC protein of Escherichia coli is required for inserting Sec-independent membrane proteins and has a supportive role for the insertion of Sec-dependent proteins into the membrane bilayer. Because a portion of YidC copurifies with the Sec translocase, this interaction might be necessary to assist in the membrane insertion of Sec-dependent proteins. This study describes a deletion analysis that investigates which parts of YidC are required for its interaction with the SecDF complex of the Sec translocase and for the function of YidC as an insertase for the Sec-dependent membrane proteins. The results suggest that the first periplasmic region, which includes residues 24-346, is required for the interaction of YidC with the Sec translocase, in particular with the SecF protein. Further studies showed that residues 215-265 of YidC are sufficient for SecF binding. Surprisingly, the interaction of YidC with SecF is not critical for cell viability as YidC, lacking residues 24-264, was fully functional to support the growth of E. coli. It was also observed that this YidC mutant was fully functional to insert the Sec-dependent subunit A of the F(1)F(o) ATP synthase and an M13 procoat derivative, as well as the Sec-independent M13 procoat protein and subunit C of the ATP synthase. Only when additional residues of the periplasmic region were deleted (265-346) was the membrane insertase function of YidC inhibited.     

Overproduction, solubilization, and reconstitution of the maltose transport system from Escherichia coli

Maltose is transported across the cytoplasmic membrane of Escherichia coli by a binding protein-dependent transport system. We observed a 10-fold increase in the level of transport activity in assays with membrane vesicles when the three membrane-associated components of the transport system (the MalF, MalG, and MalK proteins) were overproduced. In addition, we have successfully reconstituted maltose transport activity in proteoliposome vesicles from solubilized proteins using a detergent dilution procedure. The addition of ATP as an energy source was sufficient to obtain transport, and this activity was dependent on the presence of maltose binding protein and was not seen in proteoliposomes prepared from a strain with a deletion of the maltose genes. We determined that hydrolysis of ATP was directly coupled to maltose uptake. In the majority of these experiments, an average of 1.4 mol of ATP was hydrolyzed for each mole of maltose accumulated. However, in the remaining experiments, ATP hydrolysis was observed to be much higher and averaged 17 mol of ATP hydrolyzed per mol of maltose transported. Possible explanations for a variable stoichiometry are discussed. These results provide strong evidence that it is the hydrolysis of ATP by a component of the transport complex that provides the energy required for active maltose transport.     

Isolation of cold-sensitive yidC mutants provides insights into the substrate profile of the YidC insertase and the importance of transmembrane 3 in YidC function

YidC, a 60-kDa integral membrane protein, plays an important role in membrane protein insertion in bacteria. YidC can function together with the SecYEG machinery or operate independently as a membrane protein insertase. In this paper, we describe two new yidC mutants that lead to a cold-sensitive phenotype in bacterial cell growth. Both alleles impart a cold-sensitive phenotype and result from point mutations localized to the third transmembrane (TM3) segment of YidC, indicating that this region is crucial for YidC function. We found that the yidC(C423R) mutant confers a weak phenotype on membrane protein insertion while a yidC(P431L) mutant leads to a stronger phenotype. In both cases, the affected substrates include the Pf3 coat protein and ATP synthase F₁F_o subunit c (F_oC), while CyoA (the quinol binding subunit of the cytochrome bo3 quinol oxidase complex) and wild-type procoat are slightly affected or not affected in either cold-sensitive mutant. To determine if the different substrates require various levels of YidC activity for membrane insertion, we performed studies where YidC was depleted using an arabinose-dependent expression system. We found that −3M-PC-Lep (a construct with three negatively charged residues inserted into the middle of the procoat-Lep [PC-Lep] protein) and Pf3 P2 (a construct with the Lep P2 domain added at the C terminus of Pf3 coat) required the highest amount of YidC and that CyoA-N-P2 (a construct with the amino-terminal part of CyoA fused to the Lep P2 soluble domain) and PC-Lep required the least, while F_oC required moderate YidC levels. Although the cold-sensitive mutations can preferentially affect one substrate over another, our results indicate that different substrates require different levels of YidC activity for membrane insertion. Finally, we obtained several intragenic suppressors that overcame the cold sensitivity of the C423R mutation. One pair of mutations suggests an interaction between TM2 and TM3 of YidC. The studies reveal the critical regions of the YidC protein and provide insight into the substrate profile of the YidC insertase.