Novel Route to Fe‐Based Cathode as an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Efficient bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are of great importance for rechargeable metal–air batteries. Herein, FeN_x/C catalysts are synthesized by pyrolysis of thiourea and agarose containing α‐Fe₂O₃ nanoplate as Fe precursor, where α‐Fe₂O₃ nanoplate can prevent the aggregation of carbon sheets to effectively improve the specific surface area during the carbonization process. The FeN_x/C‐700‐20 catalyst displays excellent catalytic performance for both ORR and OER activity in alkaline conditions with more positive onset potential (1.1 V vs the reversible hydrogen electrode) and half‐wave potential, higher stability, and stronger methanol tolerance in alkaline solution, which are all superior to that of the commercial Pt/C catalyst. In this study, the detailed analyses demonstrate that the coexistence of Fe‐based species and high content of Fe‐N_x both play an important role for the catalytic activity. Furthermore, FeN_x/C‐700‐20 as cathode catalyst in Zn–air battery possesses higher charge–discharge stability and power density compared with that of commercial Pt/C catalyst, displaying great potential in practical implementation of for the rechargeable energy devices.     

Tailoring FeN4 Sites with Edge Enrichment for Boosted Oxygen Reduction Performance in Proton Exchange Membrane Fuel Cell

Transition metal atoms with corresponding nitrogen coordination are widely proposed as catalytic centers for the oxygen reduction reaction (ORR) in metal–nitrogen–carbon (M–N–C) catalysts. Here, an effective strategy that can tailor Fe–N–C catalysts to simultaneously enrich the number of active sites while boosting their intrinsic activity and utilization is reported. This is achieved by edge engineering of FeN₄ sites via a simple ammonium chloride salt‐assisted approach, where a high fraction of FeN₄ sites are preferentially generated and hosted in a graphene‐like porous scaffold. Theoretical calculations reveal that the FeN₄ moieties with adjacent pore defects are likely to be more active than the nondefective configuration. Coupled with the facilitated accessibility of active sites, this prepared catalyst, when applied in a practical H₂–air proton exchange membrane fuel cell, delivers a remarkable peak power density of 0.43 W cm^?2, ranking it as one of the most active M–N–C catalysts reported to date. This work provides a new avenue for boosting ORR activity by edge manipulation of FeN₄ sites.     

The polythiophene molecular segment as a sensor model for H<Subscript>2</Subscript>O,HCN, NH<Subscript>3</Subscript>, SO<Subscript>3</Subscript>, and H<Subscript>2</Subscript>S: a density functional theory study

Studying the interaction of some atmospheric gases (H₂O, HCN, NH₃, SO₃ and H₂S) with 3PT oligomers is important in the development of polymeric sensors for gas detection. In the present study, we studied the relaxed geometries, interaction energies, charge analysis, HOMO–LUMO orbital analysis, and UV–vis spectra of all interacted systems using first-principles density functional theory (DFT). All these analyses indicated the potential of polythiophene as an inexpensive polymeric sensor for the analytes mentioned. Interaction energy values of ?19.90, ?19.66, ?14.01, ?8.70, and ?4.76 kJ mol^?1 were achieved for adsorption of SO₃, H₂O, NH₃, HCN, and H₂S on 3PT, respectively. Consequently, clarification of their physical parameters became the major focus of this study.     

A density functional theory study on oxygen reduction reaction on nitrogen-doped graphene

Nitrogen (N)-doped carbons reportedly exhibit good electrocatalytic activity for the oxygen reduction reaction (ORR) of fuel cells. This work provides theoretical insights into the ORR mechanism of N-doped graphene by using density functional theory calculations. All possible reaction pathways were investigated, and the transition state of each elementary step was identified. The results showed that OOH reduction was easier than O–OH breaking. OOH reduction followed a direct Eley–Rideal mechanism (the OOH species was in gas phase, but H was chemisorbed on the surface) with a significantly low reaction barrier of 0.09 eV. Pathways for both four-electron and two-electron reductions were possible. The rate-determining step of the two-electron pathway was the reduction of O₂ (formation of OOH), whereas that of the four-electron pathway was the reduction of OH into H₂O. After comparing the barriers of the rate-determining steps of the two pathways, we found that the two-electron pathway was more energetically favored than the four-electron pathway.     

A theoretical study on the hydrogen-bonding interactions between flavonoids and ethanol/water

Ethanol and water are the solvents most commonly used to extract flavonoids from propolis. Do hydrogen-bonding interactions exist between flavonoids and ethanol/water? In this work, this question was addressed by using density functional theory (DFT) to provide information on the hydrogen-bonding interactions between flavonoids and ethanol/water. Chrysin and Galangin were chosen as the representative flavonoids. The investigated complexes included chrysin–H₂O, chrysin–CH₃CH₂OH, galangin–H₂O and galangin–CH₃CH₂OH dyads. Molecular geometries, hydrogen-bond binding energies, charges of monomers and dyads, and topological analysis were studied at the B3LYP/M062X level of theory with the 6?31++G(d,p) basis set. The main conclusions were: (1) nine and ten optimized hydrogen-bond geometries were obtained for chrysin–H₂O/CH₃CH₂OH and galangin–H₂O/CH₃CH₂OH complexes, respectively. (2) The hydrogen atoms except aromatic H1 and H5 and all of the oxygen atoms can form hydrogen-bonds with H₂O and CH₃CH₂OH. Ethanol and water form strong hydrogen-bonds with the hydroxyl, carbonyl and ether groups in chrysin/galangin and form weak hydrogen-bonds with aromatic hydrogen atoms. Except in structures labeled A and B, chrysin and galangin interact more strongly with H₂O than CH₃CH₂OH. (3) When chrysin and galangin form hydrogen-bonds with H₂O and CH₃CH₂OH, charge transfers from the hydrogen-bond acceptor (H₂O and CH₃CH₂OH in structures A, B, G, H, I, J) to the hydrogen-bond donor (chrysin and galangin in structure A, B, G, H, I, J). The stronger hydrogen-bond makes the hydrogen-bond donor lose more charge (A> B> G> H> I> J). (4) Most of the hydrogen-bonds in chrysin/galangin?H₂O/CH₃CH₂OH complexes may be considered as electrostatic dominant, while C?O2···H in structures labeled E and C?O5···H in structures labeled J are hydrogen-bonds combined of electrostatic and covalent characters. H9, H7, and O4 are the preferred hydrogen-bonding sites.     

Sub‐6 nm Fully Ordered L10‐Pt–Ni–Co Nanoparticles Enhance Oxygen Reduction via Co Doping Induced Ferromagnetism Enhancement and Optimized Surface Strain

Engineering the crystal structure of Pt–M (M = transition metal) nanoalloys to chemically ordered ones has drawn increasing attention in oxygen reduction reaction (ORR) electrocatalysis due to their high resistance against M etching in acid. Although Pt–Ni alloy nanoparticles (NPs) have demonstrated respectable initial ORR activity in acid, their stability remains a big challenge due to the fast etching of Ni. In this work, sub‐6 nm monodisperse chemically ordered L1₀‐Pt–Ni–Co NPs are synthesized for the first time by employing a bifunctional core/shell Pt/NiCoO_x precursor, which could provide abundant O‐vacancies for facilitated Pt/Ni/Co atom diffusion and prevent NP sintering during thermal annealing. Further, Co doping is found to remarkably enhance the ferromagnetism (room temperature coercivity reaching 2.1 kOe) and the consequent chemical ordering of L1₀‐Pt–Ni NPs. As a result, the best‐performing carbon supported L1₀‐PtNi_0.8Co_0.2 catalyst reveals a half‐wave potential (E_1/2) of 0.951 V versus reversible hydrogen electrode in 0.1 m HClO₄ with 23‐times enhancement in mass activity over the commercial Pt/C catalyst along with much improved stability. Density functional theory (DFT) calculations suggest that the L1₀‐PtNi_0.8Co_0.2 core could tune the surface strain of the Pt shell toward optimized Pt–O binding energy and facilitated reaction rate, thereby improving the ORR electrocatalysis.     

Biaxial Strains Mediated Oxygen Reduction Electrocatalysis on Fenton Reaction Resistant L10‐PtZn Fuel Cell Cathode

PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L1₀ structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H₂O₂ (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L1₀‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L1₀‐PtZn cathode achieves outstanding activity (0.52 A mg_Pt^?1 at 0.9 V_iR‐free, and peak power density of 2.00 W cm^?2) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1? L1₀) transition of PtZn NPs would modulate the surface Pt? Pt distances and optimize Pt? O binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability.     

FeN4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe?N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe?N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.     

Cu,Co‐Embedded N‐Enriched Mesoporous Carbon for Efficient Oxygen Reduction and Hydrogen Evolution Reactions

Rational synthesis of hybrid, earth‐abundant materials with efficient electrocatalytic functionalities are critical for sustainable energy applications. Copper is theoretically proposed to exhibit high reduction capability close to Pt, but its high diffusion behavior at elevated fabrication temperatures limits its homogeneous incorporation with carbon. Here, a Cu, Co‐embedded nitrogen‐enriched mesoporous carbon framework (CuCo@NC) is developed using, a facile Cu‐confined thermal conversion strategy of zeolitic imidazolate frameworks (ZIF‐67) pre‐grown on Cu(OH)₂ nanowires. Cu ions formed below 450 °C are homogeneously confined within the pores of ZIF‐67 to avoid self‐aggregation, while the existence of Cu? N bonds further increases the nitrogen content in carbon frameworks derived from ZIF‐67 at higher pyrolysis temperatures. This CuCo@NC electrocatalyst provides abundant active sites, high nitrogen doping, strong synergetic coupling, and improved mass transfer, thus significantly boosting electrocatalytic performances in oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER). A high half‐wave potential (0.884 V vs reversible hydrogen potential, RHE) and a large diffusion‐limited current density are achieved for ORR, comparable to or exceeding the best reported earth‐abundant ORR electrocatalysts. In addition, a low overpotential (145 mV vs RHE) at 10 mA cm^?2 is demonstrated for HER, further suggesting its great potential as an efficient electrocatalyst for sustainable energy applications.     

Active‐Site Imprinting: Preparation of Fe–N–C Catalysts from Zinc Ion–Templated Ionothermal Nitrogen‐Doped Carbons

Atomically dispersed Fe–N–C catalysts are considered the most promising precious‐metal‐free alternative to state‐of‐the‐art Pt‐based oxygen reduction electrocatalysts for proton‐exchange membrane fuel cells. The exceptional progress in the field of research in the last ≈30 years is currently limited by the moderate active site density that can be obtained. Behind this stands the dilemma of metastability of the desired FeN₄ sites at the high temperatures that are believed to be a requirement for their formation. It is herein shown that Zn²⁺ ions can be utilized in the novel concept of active‐site imprinting based on a pyrolytic template ion reaction throughout the formation of nitrogen‐doped carbons. As obtained atomically dispersed Zn–N–Cs comprising ZnN₄ sites as well as metal‐free N₄ sites can be utilized for the coordination of Fe²⁺ and Fe³⁺ ions to form atomically dispersed Fe–N–C with Fe loadings as high as 3.12 wt%. The Fe–N–Cs are active electocatalysts for the oxygen reduction reaction in acidic media with an onset potential of E₀ = 0.85 V versus RHE in 0.1 m HClO₄. Identical location atomic resolution transmission electron microscopy imaging, as well as in situ electrochemical flow cell coupled to inductively coupled plasma mass spectrometry measurements, is employed to directly prove the concept of the active‐site imprinting approach.     

TCNE-modified graphene as an adsorbent for N<Subscript>2</Subscript>O molecule: a DFT study

Adsorption behavior of nitrous oxide (N₂O) on pristine graphene (PG) and tetracyanoethylene (TCNE) modified PG surfaces is investigated using density functional theory. A number of initial adsorbate geometries are considered on both surfaces and the most stable ones are chosen upon calculation of the adsorption energies (E_ads). N₂O is found to adsorb in a weakly exoergic process (E_ads?～??3.18 kJ mol^?1) at the equilibrium distance of 3.52 Å on the PG surface. N₂O adsorption can be greatly enhanced with the presence of a TCNE molecule (E_ads?=??87.00 kJ mol^?1). Mulliken charge analysis confirms that adsorption of N₂O is not accompanied by distinct charge transfer from the surfaces to the molecule (? 0.001 │e│ for each case). Moreover, on the basis of calculated changes in the HOMO/LUMO energy gap, it is found that electronic properties of PG and TCNE modified PG are not sensitive toward adsorption of N₂O, indicating that both surfaces are not good enough to introduce as an N₂O detector. However, the considerable amount of E_ads in TCNE modified PG can be a guide to the design of graphene-based adsorbents for N₂O capture.     

Determination of reduction potential of an engineered Cu<Subscript>A</Subscript> azurin by cyclic voltammetry and spectrochemical titrations

The reduction potentials of an engineered Cu_A azurin in its native and thermally denatured states have been determined using cyclic voltammetry and spectrochemical titrations. Using a 4,4-dipyridyl disulfide modified gold electrode, the reduction potentials of native and thermally denatured Cu_A azurin are the same within the experimental error (422±5 and 425±5 mV vs. NHE, respectively, in 50 mM ammonium acetate buffer, pH 5.1, 300 mM NaCl, 25 °C), indicating that the potential is that of a nonnative state. In contrast, using a didodecyldimethylammonium bromide (DDAB) film-pyrolytic graphite edge (PGE) electrode, the reduction potentials of native and thermally denatured Cu_A azurin have been determined to be 271±7 mV (50 mM ammonium acetate buffer, pH 5.1, 4 °C) and 420±1 mV (50 mM ammonium acetate buffer, pH 5.1, 25 °C), respectively. Spectroscopic redox titration using [Ru(NH₃)₅Py]²⁺ resulted in a reduction potential (254±4 mV) (50 mM ammonium acetate buffer, pH 5.1, 4 °C) similar to the value obtained using the DDAB film-PGE electrochemical method. Complete reoxidation of [Ru(NH₃)₅Py]²⁺-reduced Cu_A azurin is also consistent with the conclusion that this spectrochemical titration method using [Ru(NH₃)₅Py]²⁺ measures the reduction potential of native Cu_A azurin.Abbreviations CcO cytochrome c oxidase - N₂OR nitrous oxide reductase - ET electron transfer - CV cyclic voltammetry - NHE normal hydrogen electrode - DDAB didodecyldimethylammonium bromide - PGE pyrolytic graphite edge     

Kinetics investigation of the hydrogen abstraction reaction between CH<Subscript>3</Subscript>SS and CN radicals

The reaction mechanisms and rates for the H abstraction reactions between CH₃SS and CN radicals in the gas phase were investigated with density functional theory (DFT) methods. The geometries, harmonic vibrational frequencies, and energies of all stationary points were obtained at B3PW91/6-311G(d,p) level of theory. Relationships between the reactants, intermediates, transition states and products were confirmed, with the frequency and the intrinsic reaction coordinate (IRC) analysis at the same theoretical level. High accurate energy information was provided by the G3(MP2) method combined with the standard statistical thermodynamics. Gibbs free energies at 298.15 K for all of the reaction steps were reported, and were used to describe the profile diagrams of the potential energy surface. The rate constants were evaluated with both the classical transition state theory and the canonical variational transition state theory, in which the small-curvature tunneling correction was included. A total number of 9 intermediates (IMs) and 17 transition states (TSs) were obtained. It is shown that IM1 is the most stable intermediate by the largest energy release, and the channel of CH₃SS?+?CN?→?IM3?→?TS10?→?P1(CH₂SS?+?HCN) is the dominant reaction with the lowest energy barrier of 144.7 kJ mol^?1. The fitted Arrhenius expressions of the calculated CVT/SCT rate constants for the rate-determining step of the favorable channel is k =7.73?×?10⁶? T ^1.40exp(?14,423.8/T) s^?1 in the temperature range of 200–2000 K. The apparent activation energy E _a(app.) for the main channel is ?102.5 kJ mol^?1, which is comparable with the G3(MP2) energy barrier of ?91.8 kJ mol^?1 of TS10 (relative to the reactants).     

Atomically Dispersed Fe‐Nx/C Electrocatalyst Boosts Oxygen Catalysis via a New Metal‐Organic Polymer Supramolecule Strategy

The development of high‐performance oxygen reduction reaction (ORR) catalysts derived from non‐Pt group metals (non‐PGMs) is urgent for the wide applications of proton exchange membrane fuel cells (PEMFCs). In this work, a facile and cost‐efficient supramolecular route is developed for making non‐PGM ORR catalyst with atomically dispersed Fe‐N_x/C sites through pyrolyzing the metal‐organic polymer coordinative hydrogel formed between Fe³⁺ and α‐L‐guluronate blocks of sodium alginate (SA). High‐angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) and X‐ray absorption spectroscopy (XAS) verify that Fe atoms achieve atomic‐level dispersion on the obtained SA‐Fe‐N nanosheets and a possible fourfold coordination with N atoms. The best‐performing SA‐Fe‐N catalyst exhibits excellent ORR activity with half‐wave potential (E_1/2) of 0.812 and 0.910 V versus the reversible hydrogen electrode (RHE) in 0.5 m H₂SO₄ and 0.1 m KOH, respectively, along with respectable durability. Such performance surpasses that of most reported non‐PGM ORR catalysts. Density functional theory calculations suggest that the relieved passivation effect of OH* on Fe‐N₄/C structure leads to its superior ORR activity to Pt/C in alkaline solution. The work demonstrates a novel strategy for developing high‐performance non‐PGM ORR electrocatalysts with atomically dispersed and stable M‐N_x coordination sites in both acidic and alkaline media.     

Theoretical study of the reaction mechanism of CH<Subscript>3</Subscript>NO<Subscript>2</Subscript> with NO<Subscript>2</Subscript>, NO and CO: the bimolecular reactions that cannot be ignored

The intriguing decompositions of nitro-containing explosives have been attracting interest. While theoretical investigations have long been concentrated mainly on unimolecular decompositions, bimolecular reactions have received little theoretical attention. In this paper, we investigate theoretically the bimolecular reactions between nitromethane (CH₃NO₂)—the simplest nitro-containing explosive—and its decomposition products, such as NO₂, NO and CO, that are abundant during the decomposition process of CH₃NO₂. The structures and potential energy surface (PES) were explored at B3LYP/6-31G(d), B3P86/6-31G(d) and MP2/6-311?+?G(d,p) levels, and energies were refined using CCSD(T)/cc-pVTZ methods. Quantum chemistry calculations revealed that the title reactions possess small barriers that can be comparable to, or smaller than, that of the initial decomposition reactions of CH₃NO₂. Considering that their reactants are abundant in the decomposition process of CH₃NO₂, we consider bimolecular reactions also to be of great importance, and worthy of further investigation. Moreover, our calculations show that NO₂ can be oxidized by CH₃NO₂ to NO₃ radical, which confirms the conclusion reached formerly by Irikura and Johnson [(2006) J Phys Chem A 110:13974–13978] that NO₃ radical can be formed during the decomposition of nitramine explosives.     

Single‐Atom to Single‐Atom Grafting of Pt1 onto FeN4 Center: Pt1@FeNC Multifunctional Electrocatalyst with Significantly Enhanced Properties

Nonprecious metal catalysts (NPMCs) Fe?N?C are promising alternatives to noble metal Pt as the oxygen reduction reaction (ORR) catalysts for proton‐exchange‐membrane fuel cells. Herein, a new modulation strategy is reported to the active moiety Fe?N₄ via a precise “single‐atom to single‐atom” grafting of a Pt atom onto the Fe center through a bridging oxygen molecule, creating a new active moiety of Pt₁?O₂?Fe₁?N₄. The modulated Fe?N?C exhibits remarkably improved ORR stabilities in acidic media. Moreover, it shows unexpectedly high catalytic activities toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), with overpotentials of 310 mV for OER in alkaline solution and 60 mV for HER in acidic media at a current density of 10 mA cm^?2, outperforming the benchmark RuO₂ and comparable with Pt/C(20%), respectively. The enhanced multifunctional electrocatalytic properties are associated with the newly constructed active moiety Pt₁?O₂?Fe₁?N₄, which protects Fe sites from harmful species. Density functional theory calculations reveal the synergy in the new active moiety, which promotes the proton adsorption and reduction kinetics. In addition, the grafted Pt₁?O₂? dangling bonds may boost the OER activity. This study paves a new way to improve and extend NPMCs electrocatalytic properties through a precisely single‐atom to single‐atom grafting strategy.     

Graphene Layers‐Wrapped Fe/Fe5C2 Nanoparticles Supported on N‐doped Graphene Nanosheets for Highly Efficient Oxygen Reduction

Synthesis of highly efficient nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) superior to platinum (Pt) is still a big challenge. Herein, a new highly active ORR electrocatalyst is reported based on graphene layers‐wrapped Fe/Fe₅C₂ nanoparticles supported on N‐doped graphene nanosheets (GL‐Fe/Fe₅C₂/NG) through simply annealing a mixture of bulk graphitic carbon nitride (g‐C₃N₄) and ferrocene. An interesting exfoliation–denitrogen mechanism underlying the conversion of bulk g‐C₃N₄ into N‐doped graphene nanosheets is revealed. Owing to the high graphitic degree, optimum N‐doping level and sufficient active sites from the graphene layers‐wrapped Fe/Fe₅C₂ nanoparticles, the as‐prepared GL‐Fe/Fe₅C₂/NG electrocatalyst obtained at 800 °C exhibits outstanding ORR activity with a 20 mV more positive half‐wave potential than the commercial Pt/C catalyst in 0.1 m KOH solution and a comparable onset potential of 0.98 V. This makes GL‐Fe/Fe₅C₂/NG an outstanding electrocatalyst for ORR in alkaline solution.     

DFT studies of the adsorption and dissociation of H2O on the Al13 cluster: origins of this reactivity and the mechanism for H2 release

A theoretical study of the chemisorption and dissociation pathways of water on the Al₁₃ cluster was performed using the hybrid density functional B3LYP method with the 6-311+G(d, p) basis set. The activation energies, reaction enthalpies, and Gibbs free energy of activation for the reaction were determined. Calculations revealed that the H₂O molecule is easily adsorbed onto the Al₁₃ surface, forming adlayers. The dissociation of the first H₂O molecule from the bimolecular H₂O structure via the Grotthuss mechanism is the most kinetically favorable among the five potential pathways for O–H bond breaking. The elimination of H₂ in the reaction of an H₂O molecule with a hydrogen atom on the Al cluster via the Eley–Rideal mechanism has a lower activation barrier than the elimination of H₂ in the reaction of two adsorbed H atoms or the reaction of OH and H. Following the adsorption and dissociation of H₂O, the structure of Al₁₃ is distorted to varying degrees.

Boosting the Activity of BaCo0.4Fe0.4Zr0.1Y0.1O3−δ Perovskite for Oxygen Reduction Reactions at Low‐to‐Intermediate Temperatures through Tuning B‐Site Cation Deficiency

Doped perovskite oxides with the general formula of A_xA′_1?xB_yB′_1?yO₃ have been extensively exploited as the cathode materials of solid oxide fuel cells (SOFCs), but the performance at low‐to‐medium temperatures still needs improvement. BaCo_0.4Fe_0.4Zr_0.1Y_0.1O_3?δ (BCFZY) has been recently reported to show promising oxygen reduction reaction (ORR) activity under SOFCs' operating conditions. Here, it is reported that the activity of BCFZY can be further boosted via introducing a slight B‐site cation deficiency into the oxide lattice, and such an improvement is assigned to an increase in oxygen mobility that brings enhancement in both surface exchange and bulk diffusion kinetics. Specifically, materials with the nominal composition of Ba(Co_0.4Fe_0.4Zr_0.1Y_0.1)_0.975O_3?δ and Ba(Co_0.4Fe_0.4Zr_0.1Y_0.1)_0.95O_3?δ show significantly improved activity for ORR at reduced temperatures with the area specific resistances of 0.011 and 0.024 Ω cm² at 600 °C, as a comparison of 0.042 Ω cm² for the cation stoichiometric BCFZY. Excessive B‐site deficiencies, however, lead to the formation of impurity phases, which cause a block for charge transfer and, consequently, a reduction in electrode performance. Introducing a B‐site cation deficiency is a promising way to optimize the activity of perovskite oxides for ORR at reduced temperatures, but the degree of deficiency shall be carefully tuned.     

Fe?N4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe? N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe? N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.