Strong substrate-stabilizing effect of a water-miscible ionic liquid [BMIM][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The effects of a water-miscible ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), on both thermodynamics and kinetic mechanism of the horseradish peroxidase (HRP)-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂ were investigated. The ionic liquid stabilized the ground state of guaiacol by causing an 8-fold increase of K_m from 3 to 23 mM upon the addition of 25% (v/v) [BMIM][BF₄]. In addition, the effect of [BMIM][BF₄] in decreasing the k_cat value of HRP catalysis was described by a non-competitive inhibition mechanism. The value of the inhibition constant of [BMIM][BF₄] was 2.9 M indicating that the ionic liquid plays the role of a weak non-competitive inhibitor for HRP catalysis.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Thermal Stability and Activity Regain of Horseradish Peroxidase in Aqueous Mixtures of Imidazolium-Based Ionic Liquids

Thermal deactivation kinetics of horseradish peroxidase (HRP) were studied from 45 to 90 °C in phosphate buffer and 5–25% (v,w/v) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄] and 1-butyl-3-methylimidazolium chloride [BMIM][Cl]. HRP activity at 25 °C was not affected by the presence of ionic liquids up to 20% (v,w/v). Increasing the ionic liquids concentration up to 25% (v,w/v) changed the biphasic character of deactivation kinetics to an apparent single first-order step. The presence of 5–10% (v/v) [BMIM][BF₄] significantly improved HRP thermal stability with lower activation energies for the deactivation second phase (83–87 kJ mol⁻¹). After deactivation, enhanced activity regain of the enzyme, up to 70–80% of the initial activity, was found in 25% (v/v) [BMIM][BF₄] and 10% (w/v) [BMIM][Cl] and correlated to prevalence of the deactivation first phase.     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Substrate stabilization and noncompetitive inhibition effects of a water-miscible ionic liquid [BMPy][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The inhibition mechanism of a water-miscible ionic liquid, N-butyl-3-methypyridinium tetrafluoroborate ([BMPy][BF₄]), on the catalysis of horseradish peroxidase (HRP) was investigated. The K _m value for the oxidation of guaiacol (2-methoxyphenol) with H₂O₂ catalyzed by HRP increased from 2.8 mM in 100% water to 12.6 mM in 25% (v/v) [BMPy][BF₄]. This increase of K _m by the ionic liquid was elucidated to be caused by the strong stabilization of the ground state of guaiacol by the ionic liquid. On the contrary, the k _cat value for the HRP-catalyzed reaction decreased from 13.8/sec in 100% water to 6.7/sec in 25% (v/v) [BMPy][BF₄]. Such decrease of k _cat value of HRP catalysis by the increasing content of [BMPy][BF₄] was described using the noncompetitive inhibition of the enzyme by the ionic liquid. The value of the inhibition constant of [BMPy][BF₄] was 1.48 M indicating that the ionic liquid exerts a weak noncompetitive inhibition effect on the HRP catalysis.     

Partial uncompetitive inhibition of horseradish peroxidase by a water-miscible ionic liquid [BMIM][MeSO4

The ionic liquid, 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MeSO₄]), was used to investigate the catalytic mechanism of horseradish peroxidase (HRP). The ionic liquid decreased both K_m and k_cat values for the HRP-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂. These studies imply that [BMIM][MeSO₄] inhibits the enzyme in an uncompetitive manner. The incorporation of substrate stabilization effects measured by a thermodynamic method into the partial uncompetitive inhibition scheme successfully describes HRP-catalysis in the presence of [BMIM][MeSO₄], which participates as the inhibitor. The inhibition constant of the ionic liquid was 0.051 M. The turn-over number of the native HRP was almost 14-times higher than that of the HRP-ionic liquid complex indicating that [BMIM][MeSO₄] does not form a dead-end complex with HRP.     

Synthesis of soluble coordination polymer nanoparticles using room-temperature ionic liquid

We report a new family of soluble cyano-bridged coordination polymer nanoparticles M₃[Cr(CN)₆]₂/[BMIM][BF₄] (where M²⁺ = Ni, Mn, V^IVO; BMIM = 1-butyl-3-methylimidazolium). These nanoparticles of ca. 6 nm were synthesised in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, which acts both as a stabilizing agent and a solvent. The magnetic properties of frozen colloids containing the nanoparticles show that the relaxation of magnetisation is strongly influenced by interparticle interactions leading to the appearance of spin-glass-like dynamics in these systems.     

Hydroxynitrile Lyase Catalysis in Ionic Liquid-containing Systems

The cleavage of mandelonitrile catalysed by hydroxynitrile lyases (HNL) from Prunus amygdalus (PaHNL) and Manihot esculenta (MeHNL) proceeded more rapidly in monophasic aqueous media containing 1-propyl-3-methylimidazolium tetrafluoroborate [C₄MIm][BF₄] than in media containing acetonitrile or THF. Both HNLs were much more thermostable in [C₄MIm][BF₄] than in acetonitrile or THF. The addition of each of the four ionic liquids 1-butyl-, 1-pentyl- and 1-hexyl-3-methylimidazolium tetrafluoroborates at 2–6% (v/v in the aqueous phase) increased both the enzyme activity and the product e.e. in the PaHNL-catalysed transcyanation in an aqueous/DIPE biphasic system. However, MeHNL was inactivated by the ionic liquids, as indicated by the decreased reaction rate, substrate conversion and product e.e.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Partitioning of acidic, basic and neutral amino acids into imidazolium-based ionic liquids

In this paper, partitioning behaviors of typical neutral (Alanine), acidic (Glutamic acid) and basic (Lysine) amino acids into imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] as extracting solvents were examined. [C₆mim][BF₄] showed the best efficiency for partitioning of amino acids. The partition coefficients of amino acids in ionic liquids were found to depend strongly on pH of the aqueous solution, amino acid and ionic liquid chemical structures. Different chemical forms of amino acids in aqueous solutions were pH dependent, so the pH value of the aqueous phase was a determining factor for extraction of amino acids into ionic liquid phase. Both water content of ionic liquids and charge densities of their anionic and cationic parts were important factors for partitioning of cationic and anionic forms of amino acids into ionic liquid phase. Extracted amino acids were back extracted into phosphate buffer solutions adjusted on appropriate pH values. The results showed that ionic liquids could be used as suitable modifiers on the stationary phase of an HPLC column for efficient separation of acidic, basic, and neutral amino acids.     

Improving ascorbyl oleate synthesis catalyzed by Candida antarctica lipase B in ionic liquids and water activity control by salt hydrates

Lipase catalyzed-synthesis of ascorbyl oleate was performed in ionic liquids with addition of salt hydrate pairs for water activity control. The highest yield in the synthesis of ascorbyl oleate (72%) was obtained in [BMIM][BF₄] in the presence of the salt pair NaI 2/0, which corresponds to a water activity of 0.3. Purity and chemical identity of 6-O-ascorbyl oleate was confirmed by ¹H and ¹³C NMR analysis.     

Production of biodiesel fuel from soybean oil catalyzed by fungus whole-cell biocatalysts in ionic liquids

The methanolysis of soybean oil to produce a fatty acid methyl ester (ME, i.e., biodiesel fuel) was catalyzed by lipase-producing filamentous fungi immobilized on biomass support particles (BSPs) as a whole-cell biocatalyst in the presence of ionic liquids. We used four types of whole-cell biocatalysts: wild-type Rhizopus oryzae producing triacylglycerol lipase (w-ROL), recombinant Aspergillus oryzae expressing Fusarium heterosporum lipase (r-FHL), Candida antarctica lipase B (r-CALB), and mono- and diacylglycerol lipase from A. oryzae (r-mdlB). w-ROL gave the high yield of fatty acid methyl ester (ME) in ionic liquid [Emim][BF₄] or [Bmim][BF₄] biphasic systems following a 24 h reaction. While lipases are known to be severely deactivated by an excess amount of methanol (e.g. 1.5 Mequiv. of methanol against oil) in a conventional system, methanolysis successfully proceeded even with a methanol/oil ratio of 4 in the ionic liquid biphasic system, where the ionic liquids would work as a reservoir of methanol to suppress the enzyme deactivation. When only w-ROL was used as a biocatalyst for methanolysis, unreacted mono-glyceride remained due to the 1,3-positional specificity of R. oryzae lipase. High ME conversion was attained by the combined use of two types of whole-cell biocatalysts, w-ROL and r-mdlB. In a stability test, the activity of w-ROL was reduced to one-third of its original value after incubation in [Bmim][BF₄] for 72 h. The stability of w-ROL in [Bmim][BF₄] was greatly enhanced by cross-linking the biocatalyst with glutaraldehyde. The present study demonstrated that ionic liquids are promising candidates for use as the second solvent in biodiesel fuel production by whole-cell biocatalysts.     

Lipase-catalyzed acylation of lily polysaccharide in ionic liquid-containing systems

A comparative study was made of immobilized Burkholderia cepacia lipase (PSL-C)-catalyzed acylation of lily polysaccharide (LP) with vinyl acetate in organic solvents, ionic liquids (ILs) and IL-containing systems. The degree of substitution (DS) of the modified LP was used to evaluate the extent of acylation and thus enzymatic activity. In this manner, an eco-friendly solvent, 2-methyltetrahydrofuran (MeTHF), was found to be the most suitable organic reaction medium. However, compared to MeTHF, enhanced enzyme activity was observed when 1-butyl-3-methylimidazolium tetrafluorobrate ([C₄MIm][BF₄]) was used as the solvent. To further enhance the DS of the modified LP product, co-solvent mixtures of [C₄MIm][BF₄] and MeTHF were investigated. Among the various MeTHF–[C₄MIm][BF₄] systems examined, 20% (v/v) MeTHF–[C₄MIm][BF₄] produced the highest DS. In this reaction medium, the optimal water activity, reaction temperature and time were 0.33, 55 °C and 18 h, respectively, producing a product DS as high as 0.67. The PSL-C enzyme exhibited a much higher stability in the IL-containing system. Additionally, PSL-C-catalyzed acylation of LP was highly regioselective, causing acylation of only C6OH.     

Modeling stability and flexibility of α-Chymotrypsin in room temperature ionic liquids

We investigate the structure and dynamics of α-Chymotrypsin in five room temperature ionic liquids (RTILs) sharing a common cation, hydrated with different water percentages (w/w) (weight of water over protein). Results from molecular dynamics simulations are correlated with experimental evidences from studies on the activity of enzymes in RTILs. α-Chymotrypsin protein structure is closer to its native crystallographic structure in RTILs than in aqueous environment. We show that the structural properties of α-Chymotrypsin were affected by the water concentration assayed in a typical bell-shaped profile, which is also frequently reported for organic solvents. The protein structure was more native like at 10–20% of water (w/w) for all RTILs except for [BMIM][Cl]. We found that the fluctuations of the main chain in [BMIM][BF₄] and [BMIM][TfO] were not significantly affected by the increasing amount of water. However, we were able to show that the flexible regions were the ones more hydrated, indicating that water is responsible for the flexibility of the protein. The solvation of the enzyme in water-immiscible RTILs, such as [BMIM][PF₆] and [BMIM][Tf₂N] lead to higher enzyme flexibility at increased water content. Enzyme solvation by [BMIM][Cl] resulted in ion penetration in the core enzyme structure, causing incremented flexibility and destabilization at low water percentages. All RTILs stripped water molecules from the protein surface, following a similar behavior also found in organic solvents. Anions formed structured arrangements around the protein, which allowed non-stripped water molecules to localize on the protein surface.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Stereoselective synthesis of (R)-1-chloro-3(3,4-difluorophenoxy)-2-propanol using lipases from Pseudomonas aeruginosa in ionic liquid-containing system

Direct transesterification of (R,S)-1-chloro-3-(3,4-difluorophenoxy)-2-propanol (rac-CDPP) (a key intermediate in the synthesis of the chiral drug (S)-lubeluzole) with vinyl butyrate by lipases from Pseudomonas aeruginosa (P. aeruginosa) MTCC 5113 was performed in hexane with ionic liquids (ILs) 1-butyl-3-methyl imidazolium hexafluorophosphate [BMIm][PF₆] and 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIm][BF₄] as co-solvents. The maximum conversion (>49%) and enantiomeric excess (ee > 99.9%) was achieved in 6 h of incubation at 30 °C with [BMIm][PF₆] as co-solvent in a two-phase system. The enzyme was able to perform with the same specificity even at 60 °C in the presence of ILs. It was possible to use lipases repeatedly for more than 10 times while still maintaining absolute enantioselectivity and reactivity. Stability studies on lipases from P. aeruginosa in ILs revealed the fact that the enzyme constancy and the reactivity in catalyzing transesterification of rac-CDPP into (S)-1-chloro-3-(3,4-difluorophenoxy)-2-butanoate was of the order of [BMIm][PF₆] > [BMIm][BF₄] in two-phase system.     

Lipase-catalyzed transesterification in several reaction systems: An application of room temperature lonic liquids for bi-phasic production ofn-butyl acetate

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni-and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][PF₆]) and bis[(trifluoromethylsulfonyl) imide] ([BMIM] [Tf₂N]) were employed as reaction media for the transesterification ofn-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor, The conversion yield was increased around 10% in a water/[BMIM][Tf₂N], bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][Tf₂N] system. Partion coefficients of the substrates in the water/[BMIM][Tf₂N] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.     

Microbial reduction of ethyl acetoacetate to ethyl (R)-3-hydroxybutyrate in an ionic liquid containing system

A hydrophilic ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) was successfully employed as co-solvent for asymmetric bioreduction of ethyl acetoacetate (EOB) to ethyl (R)-3-hydroxybutyrate (R-EHB) catalyzed by Pichia membranaefaciens Hansen ZJPH07 cells. The results demonstrated that the addition of [BMIM]BF₄ in reaction system can markedly reduce the substrate inhibition and moderately improve the enantioselectivity compared to that in monophasic aqueous system. Among different alcohols and carbohydrates tried as co-substrate, glucose was a proper electron donor. Although isopropanol gave the best enantioselectivity with the highest yield, S-enantiomer was obtained. To optimize the bioreduction, some reaction parameters for the biosynthesis of R-EHB in this IL-containing system were investigated, such as temperature, buffer pH, shaking speed, substrate concentration, wet cells concentration and reaction time. Under the optimum conditions, best conversion of 77.8% and product enantiomeric excess (e.e.) of 73.0% were obtained. A comparative study was performed either in the presence or in the absence of [BMIM]BF₄, higher reaction yield (77.8% versus 68.5%) and product e.e. (73.0% versus 65.1%) were observed in IL-containing system with 0.55 M of the substrate, but 0.35 M of substrate concentration for the reduction in aqueous system without the addition of [BMIM]BF₄.