Electrochemical profiles of Herba Saussureae Involucratae by capillary electrophoresis with electrochemical detection

A high-performance capillary electrophoresis with electrochemical detection method has been developed for the determination of the pharmacologically active ingredients, acacetin, rutin, umbelliferone, kaempferol, apigenin, luteolin and quercetin, in Herba Saussureae Involucratae. Under optimum conditions, the seven analytes could be completely separated within 19 min in a 75 cm length capillary at a separation voltage of 16 kV in a 50 mM borax running buffer (pH 9.2). A 300 microm diameter carbon disk electrode, positioned opposite the outlet of the capillary in a wall-jet configuration at a potential of +950 mV (vs a saturated calomel electrode) was used as the working electrode. A good linear relationship was established between peak current and concentration of the analytes over two orders of magnitude with detection limits (signal-to-noise ratio = 3) ranging from 1.2 x 10(-7) to 4.1 x 10(-8) g/mL for all analytes. The proposed method has been successfully applied to the analyses of bio-active components of Herba Saussureae Involucratae samples after a relatively simple extraction procedure. The assay results show that the resultant electrochemical profiles are indicative of the content diversity of each electrochemically active ingredient in the various samples, and may also offer some evidence for phytotaxonomy.     

Determination of josamycin in rat plasma by capillary electrophoresis coupled with post-column electrochemiluminescence detection

A novel determination method for josamycin (JOS) based on capillary electrophoresis-electrochemiluminescence detection has been described. In this study, platinum disk electrode (300 microm in diameter) was used as a working electrode and the conditions affecting separation and detection were investigated in detail. Under optimal condition: 40 cm separation capillary (75 microm i.d.); 1.25 V applied potential on the Pt disc of the ECL detector cell; 5 mM Ru(bpy)3(2+) and 50mM phosphate buffer (pH 7.5) in the detection cell; 12 kV separation voltage; 8s injection time; 10 kV injection voltage and 15 mM running buffer (pH 7.5), calibration curve was linear over the range from 10 ng/mL to 5.0 microg/mL with a detection limit of 3.1 ng/mL at a signal-to-noise ratio of 3. The method can be successfully applied for the determination of josamycin in rat plasma in 6 min and the extraction recoveries with spiked plasma samples were over 92%.     

Simultaneous determination of phenylethanoid glycosides and aglycones by capillary zone electrophoresis with running buffer modifier

Although the separation efficiency of capillary electrophoresis (CE) is much higher than that of other chromatographic methods, it is sometimes difficult to adequately separate the complex ingredients in biological samples. This article describes how one effective and simple way to develop the separation efficiency in CE is to add some modifiers to the running buffer. The suitable running buffer modifier β-cyclodextrin (β-CD) was explored to fast and completely separate four phenylethanoid glycosides and aglycones (homovanillyl alcohol, hydroxytyrosol, 3,4-dimethoxycinnamic acid, and caffeic acid) in Lamiophlomis rotata (Lr) and Cistanche by capillary zone electrophoresis with ultraviolet (UV) detection. It was found that when β-CD was used as running buffer modifier, a baseline separation of the four analytes could be accomplished in less than 20 min and the detection limits were as low as 10⁻³ mg L⁻¹. Other factors affecting the CE separation, such as working potential, pH value and ionic strength of running buffer, separation voltage, and sample injection time, were investigated extensively. Under the optimal conditions, a successful practical application on the determination of Lr and Cistanche samples confirmed the validity and practicability of this method.     

Determination of ascorbic acid in individual rat hepatocyte by capillary electrophoresis with electrochemical detection

A method for the direct determination of ascorbic acid (AA) in individual rat hepatocyte based on capillary electrophoresis (CE) coupled with electrochemical detection (ECD) using a new kind of homemade carbon fiber micro-disk bundle electrode has been described. Individual rat hepatocytes were injected into a fused-silica capillary with an inner diameter of 25 microm, and lysed by 0.1% sodium dodecylsulfate (SDS) as cell lysis solution. The following conditions were suitable for the determination of AA: running buffer, 1.83 x 10(-2) mol/l Na2HPO4-1.70 x 10(-3) mol/l NaH2PO4 (pH 7.8); separation voltage, 20.0 kV; detection potential, 0.80 V (vs. saturated calomel electrode (SCE)). The concentration limit of detection (LOD) of the method was 1.7 x 10(-6) mol/l at a signal-to-noise (S/N) ratio of 3, and the mass LOD was 3.0 fmol. The linear dynamic range was from 5.0 x 10(-6) to 5.0 x 10(-4) mol/l with a correlation coefficient of 0.9962 for the injection voltage of 5.0 kV and injection time of 10s. The relative standard deviation (R.S.D.) was 0.85% for the migration time and 1.8% for the peak current. This method was successfully applied to AA determination in rat hepatocyte. The recovery was between 91% and 97%, and the amount of AA in single rat hepatocyte ranged from 28 to 63 fmol.     

Determination of midecamycin by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of midecamycin using an end-column amperometric detection with a carbon fiber micro-disk bundle electrode at a constant potential of +1.15 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 1.00x10(-3) mol l(-1) Na(2)HPO(4)-3.49x10(-4) mol l(-1) NaOH (pH 11.4) for the buffer solution, 20 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, respectively. The limit of detection is 5.0x10(-7) mol l(-1) or 0.41 fmol (S/N=3). The linear range of the calibration curve is 1.00x10(-6)-1.00x10(-3) mol l(-1). The relative standard deviation is 1.4% for the migration time and 4.9% for the electrophoretic peak current. The method could be applied to the determination of midecamycin in human urine. In this case, a separation voltage of 14 kV was used.     

Rapid,fluorimetric-liquid chromatographic determination of malondialdehyde in biological samples

Capillary zone electrophoresis was employed for the determination of lactate using end-column amperometric detection at a carbon fiber bundle microdisk electrode. The optimum conditions of separation and detection are 3.6 x 10(-3) mol/l Na(2)HPO(4)-1.4 x 10(-3) mol/l NaH(2)PO (pH 7.2) for the buffer solution, 18 kV for the separation voltage and 1.60 V versus the saturated calomel electrode for the detection potential. The limit of detection is 7.6 x 10(-7) mol/l or 1.7 fmol (S/N=3) and the linear range is 1.7 x 10(-6)-8.2 x 10(-4) mol/l for the injection voltage of 6 kV and injection time of 5 s. The RSD is 1.8% for the migration time and 3.3% for the electrophoretic peak current. The method was applied to the determination of lactate in human saliva. The recovery of the method is between 95 and 109%.     

Determination of caffeine and its metabolites by micellar electrokinetic capillary electrophoresis

The determination of caffeine and its analogues is important for a wide variety of analyses and is performed in an assortment of matrices ranging from food to clinical samples. While reversed-phase HPLC has become the standard analysis protocol in most laboratories, capillary electrophoresis has the advantages of higher separation efficiency and shorter separation time. The micellar capillary electrophoresis (MECC) separation of caffeine and its metabolites, theobromine, paraxanthine, theophylline and 1,3,7-trimethyluric acid was investigated using sodium dodecyl sulphate (SDS) as the micellar phase. The effects of pH, micelle concentration, buffer concentration, ionic strength, buffer salts, applied voltage and injection time were studied to select the optimum conditions for the determination of caffeine and its four analogues in drugs, foods and body fluids. Caffeine and its three analogues were resolved within 120 s with detection limits less than 1 μg/ml. Samples could be analyzed utilizing direct injection with satisfactory resolution and reproducibility.     

Measurement of chloramphenicol by capillary zone electrophoresis following end-column amperometric detection at a carbon fiber micro-disk array electrode

Capillary zone electrophoresis was employed for the measurement of chloramphenicol using end-column amperometric detection with a carbon fiber micro-disk array electrode, at a constant potential of −1.00 V vs. saturated calomel electrode. The effect of oxygen in the buffer has been investigated. It is found that when the area of the carbon fiber electrode is smaller than 1.1 mm², the interference of oxygen can be overcome. In this procedure deoxygenation is not necessary. The effect of pH, the concentration of the buffer and the high separation voltage across the capillary on the migration time, electrophoretic peak current and separation efficiency has been studied. The optimum conditions of separation and detection are 8.4×10⁻⁴ mol/l HOAc–3.2×10⁻³ mol/l NaOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, respectively. The calibration plot was found to be linear in the range 5×10⁻⁶ to 1×10⁻³ mol/l and the limit of detection is 9.1×10⁻⁷ mol/l or 1.4 fmol (S/N=2). The relative standard deviation is 1.1% for the migration time and 2.3% for the electrophoretic peak current. The method was applied to the determination of chloramphenicol in human serum.     

Determination of pseudolycorine in the bulb of lycoris radiata by capillary electrophoresis combined with online electrochemiluminescence using ultrasonic-assisted extraction

A novel method for determination of pseudolycorine in the bulb of lycoris radiata by capillary electrophoresis coupled with online electrochemiluminescence detection with ultrasonic-assisted extraction has been developed. The effects of several factors such as detection potential, concentration and pH of phosphate buffer, separation voltage, injection time, ultrasonic power and extraction time were investigated. Under optimal conditions, the linear concentration range for pseudolycorine was 0.002-2 μg/mL with a correlation coefficient of 0.9991. Relative standard deviations of migration time and peak areas were 1.4 and 3.2%, respectively. The limit of detection (S/N=3) was 0.46 ng/mL. The proposed method can be successfully applied to the determination of pseudolycorine in the bulb of lycoris radiata.     

Amperometric detection of perphenazine at a carbon fiber micro-disk bundle electrode by capillary zone electrophoresis

A simple method for determination of perphenazine by capillary zone electrophoresis with amperometric detection is described. The optimum conditions of separation and detection are 1.50 x 10(-3) mol/l Na(2)B(4)O(7)-1.0 x 10(-3) mol/l NaOH (pH 9.9) for the buffer solution, 18 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, and 0.80 V versus saturated calomel electrode for the detection potential, respectively. The limit of detection is 5.0 x 10(-8) mol/l or 44 amol (S/N=3). The linear range of the calibration curve is 1.00 x 10(-7) to 1.00 x 10(-4) mol/l. The relative standard deviation is 1.5% for the migration time and 2.9% for the electrophoretic current at peak maximum. The method is applied to the determination of perphenazine in human urine.     

Chemiluminescence determination of pharmacologically active compounds by capillary electrophoresis.

A simple and rapid capillary electrophoresis with direct chemiluminescence method has been developed for the determination of five natural pharmacologically active compounds including rutin, protocatechuic aldehyde, chlorogenic acid, luteolin and protocatechuic acid. The luminol as a component of the separation electrolyte buffer was introduced at the head of the separation capillary. The separation of five compounds was carried out in a fused-silica capillary with 15.0 mmol/L tetraborate, 1.0 mmol/L SDS and 0.42 mmol/L luminol (pH 8.5). The analytes was determined by enhancing the chemiluminescence of luminol with 0.13 mmol/L K3Fe(CN)6 in 0.05 mol/L NaOH, which was introduced at the post-column stage. The voltage applied was 16 kV. Under the optimum conditions, the analytes were separated within 10 min. The excellent linearity was obtained over two to three orders of magnitude with a detection limit (signal:noise = 3) of 0.012-0.055 micromol/L for all five analytes. The method was successfully used in the analysis of pharmaceutical and biological samples, and the assay results were satisfactory.     

Determination of lactate dehydrogenase in human erythrocytes by capillary electrophoresis with electrochemical detection

Capillary electrophoresis (CE) was employed to analyze lactate dehydrogenase (LDH) in human erythrocytes using an amperometric detector with a carbon fiber micro-disk bundle electrode. LDH activity was measured by determining the amount of NADH generated by LDH through a enzyme-catalyzed reaction between NAD(+) and lithium lactate. The factors influencing the enzyme-catalyzed reaction, separation and detection were examined and optimized. The following conditions were suitable for the determination of LDH: running buffer, 5.0 x 10(-2)mol/l Tris-HCl (pH 7.5); separation voltage, 20.0 kV; detection potential, 1.00 V (versus saturated calomel electrode (SCE)). The conditions of enzyme-catalyzed reaction were: reaction buffer, 5.0 x 10(-2)mol/l Tris-HCl (pH 9.3); substrates, 5.0 x 10(-2)mol/l lithium lactate and 5.0 x 10(-3)mol/l NAD(+); reaction time, 10 min. The concentration limit of detection (LOD) of the method was 0.017 U/ml at a signal-to-noise (S/N) ratio of 3, which corresponded to 1.10 x 10(-10)mol/l, and the mass LOD was 2 x 10(-20)mol. The linear dynamic range was 0.039-4.65 U/ml for the injection voltage of 5.0 kV and injection time of 10s. The relative standard deviation (R.S.D.) was 0.85% for the migration time and 1.8% for the electrophoretic peak area. The method was applied to determine LDH in human erythrocytes. The recovery of the method was between 98 and 101%.     

Determination of uric acid and p-aminohippuric acid in human saliva and urine using capillary electrophoresis with electrochemical detection: potential application in fast diagnosis of renal disease

The monitoring of uric acid (UA) and p-aminohippuric acid (PAH) levels in biological samples is routinely carried out in clinical laboratories as an indication of renal disease. With the aim of investigation of the correlation between the trace amounts of UA and PAH in human saliva or urine and renal diseases, we carried out the determination of UA and PAH in human saliva and urine by using capillary electrophoresis with electrochemical detection (CE-ED) in this work. Under the optimum conditions, UA, PAH and three coexisting analytes could be well separated within 21 min at the separation voltage of 14 kV in 80 mmol/L borax running buffer (pH 9.2). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N = 3) ranged from 5.01 x 10(-7) to 2.00 x 10(-6) mol/L for all analytes. The result shows that this proposed method could be successfully applied for the study on the correlation between the levels of UA and PAH in human saliva and urine and renal diseases, and provide an alternative and convenient method for the fast diagnosis of renal disease.     

Separation and determination of bupivacaine in plasma by capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence detection.

A new, rapid, selective and sensitive method is described for determination of bupivacaine by capillary electrophoresis coupled with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)2+] electrochemiluminescence detection. The influence of parameters such as detection potential, Ru(bpy)(3)2+ concentration, buffer concentration and pH, injection time and separation voltage on separation efficiency and ECL peak intensity was systematically investigated. Under optimized conditions, the calibration curve was linear in the range 0.02-10 microg/mL. The RSD was 4.0% (n = 6). The detection limit was 3 ng/mL. The recoveries obtained were about 90%. This method was tested in the analysis of plasma samples taken from a rat after it had received bupivacaine injections.     

Separation of bisbenzylisoquinoline alkaloids by micellar electrokinetic chromatography

The micellar electrokinetic chromatographic (MEKC) separation of seven bisbenzylisoquinoline alkaloids has been developed. The effects of various separating factors were studied. Optimum separation was achieved using a buffer (pH 9.2) of 20 mM sodium borate and 20 mM sodium dihydrogen phosphate buffer containing 55 mM sodium cholate; the optimum voltage and injection time were 21 kV and 0.05 min, respectively. Highest peak efficiency was obtained when the analytes were dissolved in 10 mM sodium dodecyl sulphate as sample matrix for injection. The elution order of the bisbenzylisoquinoline alkaloids was related to their lipophilicity. The resolution, run time and detection limits of the MEKC method were compared with those of an HPLC method developed previously.     

Electrochemical determination of uric acid at ordered mesoporous carbon functionalized with ferrocenecarboxylic acid-modified electrode

Ordered mesoporous carbon (OMC) functionalized with ferrocenecarboxylic acid (Fc) was used to modify the glassy carbon (GC) electrode. The characterization of OMC–Fc shows that, after anchoring ferrocene on the mesoporous, ordered mesostructure of the material (OMC–Fc) remains intact and Fc is electrochemically accessible. The obtained OMC–Fc-modified electrode was used to investigate the electrochemical behavior of uric acid (UA). UA oxidation is catalyzed by this electrode in aqueous buffer solution (pH 7.3) with a decrease of 200 mV in overpotential compared to GC electrode. The detection and determination of UA in the presence of ascorbic acid (AA), the main interferent, were achieved. The voltammetric signals due to UA and AA were well separated with a potential difference of 308 mV, a separation that can allow the simultaneous determination of UA and AA. With amperometric method, at a constant potential of 375 mV, the catalytic current of UA versus its concentration shows a good linearity in the range 60–390 μM (R = 0.998) with a detection limit of 1.8 μM (S/N = 3). These results are not influenced by the presence of AA in the sample solution. With good stability and reproducibility, the present OMC–Fc-modified electrode was applied in the determination of UA content in urine sample and satisfactory results were obtained.     

Determination of L-dopa using electropolymerized 3,3',3',3'-tetraaminophthalocyanatonickel(II) film on glassy carbon electrode

Electropolymerized film of 3,3',3',3'-tetraaminophthalocyanatonickel(II) (p-Ni(II)TAPc) on glassy carbon (GC) electrode was used for the selective and stable determination of 3,4-dihydroxy-L-phenylalanine (L-dopa) in acetate buffer (pH 4.0) solution. Bare GC electrode fails to determine the concentration of L-dopa accurately in acetate buffer solution due to the cyclization reaction of dopaquinone to cyclodopa in solution. On the other hand, p-Ni(II)TAPc electrode successfully determines the concentration of L-dopa accurately because the cyclization reaction was prevented at this electrode. It was found that the electrochemical reaction of L-dopa at the modified electrode is faster than that at the bare GC electrode. This was confirmed from the higher heterogeneous electron transfer rate constant (k(0)) of L-dopa at p-Ni(II)TAPc electrode (3.35 x 10(-2) cms(-1)) when compared to that at the bare GC electrode (5.18 x 10(-3) cms(-1)). Further, it was found that p-Ni(II)TAPc electrode separates the signals of ascorbic acid (AA) and L-dopa in a mixture with a peak separation of 220 mV. Lowest detection limit of 100 nM was achieved at the modified electrode using amperometric method. Common physiological interferents like uric acid, glucose and urea does not show any interference within the potential window of L-dopa oxidation. The present electrode system was also successfully applied to estimate the concentration of L-dopa in the commercially available tablets.     

Voltammetric determination of all DNA nucleotides

The voltammetric oxidation of all deoxyribonucleic acid (DNA) monophosphate nucleotides is investigated for the first time over a wide pH range by differential pulse voltammetry with a glassy carbon electrode. Experimental conditions such as the electrode size, supporting electrolyte composition, and pH were optimized to obtain the best peak potential separation and higher currents. This enabled the simultaneous voltammetric determination of all four DNA bases in equimolar mixtures and detection limits in the nanomolar range at physiological pH. It was also possible to detect for the first time the oxidation of each of the purine and pyrimidine nucleotides free in solution or as monomers in single-stranded DNA.     

Determination of dimethylamine and other low-molecular-mass amines using capillary electrophoresis with laser-induced fluorescence detection

The potential of capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection for the separation and determination of dimethylamine (DMA) and other low-molecular-mass amines involving precolumn derivatization with fluorescein isothiocyanate isomer I (FITC) was investigated. Different variables that affect derivatization (pH, FITC concentration, reaction time and temperature) and separation (buffer concentration, addition of various organic modifiers, applied voltage and length of capillary) were studied. The linearity, reproducibility and reliability of the method were evaluated. The estimated instrumental detection limit for a 2-s pressure injection of the FITC-DMA derivative was 50 pg/ml (10⁻⁹ M), using LIF detection with excitation and emission wavelengths of 488 nm and 520 nm, respectively. However, for practical reasons, a minimum of 5 ng/ml DMA should be subjected to the derivatization. The applicability of the described method to the extract of atmospheric aerosol samples was demonstrated.     

Determination of 5‐hydroxytryptamine in serum by electrochemiluminescence detection with the aid of capillary electrophoresis

A rapid, sensitive and simple electrochemiluminescence method for the determination of 5‐hydroxytryptamine (5‐HT) using capillary electrophoresis was proposed. The experimental parameters, including the detection potential, the concentration of Ru(bpy)₃²⁺, the concentration and pH of phosphate buffer for separation and detection, the injection voltage and time and the separation voltage on the determination of 5‐HT, were optimized. Under the optimized conditions, the linear concentration range for 5‐HT was 3.5 × 10^‐9–5.1 × 10^‐3 mol/L, with a detection limit of 5 × 10^‐10 mol/L. The relative standard deviations (RSDs) of the ECL intensity and the migration times for six continuous injections of 1.0 µmol/L 5‐HT were 2.48% and 1.3%, respectively. The method was successfully applied to 5‐HT assay in samples of human serum in 5 min and the extraction recoveries with spiked serum samples were over 94.4%. Copyright © 2011 John Wiley & Sons, Ltd.