Inhibition of iron-molybdenum cofactor binding to component I of nitrogenase

Tetrathiomolybdate inhibits iron-molybdenum cofactor (FeMo cofactor) binding to component I of nitrogenase. Molybdenum-iron cluster (a subcomponent of FeMo cofactor) and tetrathiomolybdate inhibited FeMo cofactor activation of inactive nitrogenase component I in extracts of Azotobacter vinelandii and Klebsiella pneumoniae mutant strains defective in the biosynthesis of FeMo cofactor. Addition of tetrathiotungstate, the tungsten analog of tetrathiomolybdate, to the mutant extracts had no significant inhibitory effect on subsequent activation by FeMo cofactor.     

Biosynthesis of the iron-molybdenum cofactor of nitrogenase

The iron-molybdenum cofactor (FeMo-co) of nitrogenase is a Mo-Fe-S cluster that has been proposed as the site of substrate reduction for the nitrogenase enzyme complex. Biosynthesis of FeMo-co in Klebsiella pneumoniae requires at least six nif (nitrogen fixation) gene products. One of the nif genes, nifV, apparently encodes a homocitrate synthase. The synthesis and accumulation of homocitrate [(R)-2-hydroxy-1,2,4-butanetricarboxylic acid] in K.pneumoniae is correlated to the presence of a functional nifV gene. K.pneumoniae strains with mutations in nifV synthesize and accumulate an aberrant form of FeMo-co. Nitrogenase from NifV- mutants is capable of reducing some of the substrates of nitrogenase effectively (e.g. acetylene), but reduces N2 poorly. With the aid of an in vitro FeMo-co synthesis system, it recently has been established that homocitrate is an endogenous component of FeMo-co. Substitution of homocitrate with other carboxylic acids results in the formation of aberrant forms of FeMo-co with altered substrate reduction capability.     

Biosynthesis of iron-molybdenum cofactor in the absence of nitrogenase.

Klebsiella pneumoniae accumulates molybdenum during nitrogenase derepression. The molybdenum is primarily in nitrogenase component I in the form of iron-molybdenum cofactor (FeMo-co). Mutations in any of three genes (nifB, nifN, and nifE) involved in the biosynthesis of FeMo-co resulted in very low molybdenum accumulation and in a molybdenum-free nitrogenase component I. A mutant lacking both subunits of nitrogenase component I accumulated 60% of the amount of molybdenum present in the wild type. The molybdenum was in protein-bound form and behaved differently than that in the wild type with respect to electrophoretic mobility, size, and extractability by organic solvents. Two forms of molybdenum could be extracted from the protein fraction of the mutant; one of them was not detected in the wild type, and the other behaved like FeMo-co in nonaqueous gel filtration chromatography. Crude extracts of this mutant were able to complement in vitro K. pneumoniae or Azotobacter vinelandii mutants unable to produce FeMo-co. These data show that biosynthesis of FeMo-co does not require the presence of nitrogenase component I. In its absence, FeMo-co is accumulated on a different protein, presumably an intermediate in the normal FeMo-co biosynthetic pathway.     

Incorporation of molybdenum into the iron-molybdenum cofactor of nitrogenase.

The biosynthesis of the iron-molybdenum cofactor (FeMo-co) of dinitrogenase was investigated using 99Mo to follow the incorporation of Mo into precursors. 99Mo label accumulates on dinitrogenase only when all known components of the FeMo-co synthesis system, NifH, NifNE, NifB-cofactor, homocitrate, MgATP, and reductant, are present. Furthermore, 99Mo label accumulates only on the gamma protein, which has been shown to serve as a chaperone/insertase for the maturation of apodinitrogenase when all known components are present. It appears that only completed FeMo-co can accumulate on the gamma protein. Very little FeMo-co synthesis was observed when all known components are used in purified forms, indicating that additional factors are required for optimal FeMo-co synthesis. 99Mo did not accumulate on NifNE under any conditions tested, suggesting that Mo enters the pathway at some other step, although it remains possible that a Mo-containing precursor of FeMo-co that is not sufficiently stable to persist during gel electrophoresis occurs but is not observed. 99Mo accumulates on several unidentified species, which may be the additional components required for FeMo-co synthesis. The molybdenum storage protein was observed and the accumulation of 99Mo on this protein required nucleotide.     

Oxidation-reduction properties and complexation reactions of the iron-molybdenum cofactor of nitrogenase

The interactions of the iron-molybdenum cofactor, FeMoco, isolated from acid-treated Azotobacter vinelandii molybdenum-iron protein (Av1) with EDTA and thiophenol in N-methylformamide solution have been reinvestigated. Our studies show that EDTA alone is sufficient to eliminate the EPR signal of dithionite-reduced FeMoco. Neither light/5-deazaflavin nor carbon monoxide are required, which implies that this EPR-silent form of FeMoco does not correspond to the EPR-silent, substrate-reducing state of Av1. As EDTA-treated FeMoco does not regain EPR activity on addition of sodium dithionite or thiophenol, it is apparently distinct from the EPR-silent form of either dye-oxidized FeMoco or dye-oxidized Av1. Thiophenol sharpens the EPR signal of dithionite-reduced FeMoco and shifts the g = 3.3 feature to g = 3.6. This shift is complete at 1:1 ratio of thiophenol/Mo atom, while the EDTA effect requires about 40 molecules/Mo atom. Thiophenol and EDTA probably affect different sites of FeMoco. The binding of either reactant does not affect the activity of FeMoco as measured by its ability to reconstitute extracts of A. vinelandii mutant UW45.     

Synthesis of the iron-molybdenum cofactor of nitrogenase is inhibited by a low-molecular-weight metabolite of Klebsiella pneumoniae.

The in vitro synthesis of the iron-molybdenum cofactor nitrogenase was inhibited by a low-molecular-weight factor. This inhibitory factor was present in the membrane extracts of wild-type and nif mutant strains of Klebsiella pneumoniae that were grown under conditions that either repressed or derepressed nitrogenase expression. In vitro, the inhibition was specific for the NifB protein. Addition of this factor to K. pneumoniae cells at various times during nif derepression decreased nitrogenase activity, presumably through inhibition of iron-molybdenum cofactor synthesis. The inhibitor was purified by solvent extraction and chromatography on DEAE-cellulose, silica gel, and aluminum oxide columns.     

Cyanide and methylisocyanide binding to the isolated iron-molybdenum cofactor of nitrogenase

19F NMR and x-ray absorption experiments have been performed with both the isolated FeMo cofactor and the MoFe protein of nitrogenase in search of direct evidence for substrate or inhibitor binding. Using 19F NMR as a probe and p-CF3C6H4S- as the receptor ligand, the data show that the nitrogenase inhibitors CN- and CH3NC bind to the isolated FeMo cofactor-RFS- complex in N-methylformamide with a finite formation constant. Their binding increases the electronic relaxation time of the complex and increases the life-time of the FeMo cofactor-p-CF3C6H4S- bond, Parallel molybdenum K edge and extended x-ray absorption fine structure experiments show that CH3NC does not bind to molybdenum. Although CO and N3- both relieve CN- and CH3NC inhibition of electron flow through nitrogenase, unlike the latter, they do not appear to bind to isolated FeMo cofactor. In experiments with the dithionite-reduced MoFe protein, we did not detect any changes in the molybdenum K edge or extended x-ray absorption fine structure spectra upon addition of CO, N2, C2H2, NaCN, CH3NC, or azide demonstrating that either these substrates and inhibitors do not bind to molybdenum or that the FeMo cofactor site of nitrogenase is inaccessible to substrate binding except under turnover conditions.     

Evidence for nifU and nifS participation in the biosynthesis of the iron-molybdenum cofactor of nitrogenase

The nifU and nifS genes encode the components of a cellular machinery dedicated to the assembly of [2Fe-2S] and [4Fe-4S] clusters required for growth under nitrogen-fixing conditions. The NifU and NifS proteins are involved in the production of active forms of the nitrogenase component proteins, NifH and NifDK. Although NifH contains a [4Fe-4S] cluster, the NifDK component carries two complex metalloclusters, the iron-molybdenum cofactor (FeMo-co) and the [8Fe-7S] P-cluster. FeMo-co, located at the active site of NifDK, is composed of 7 iron, 9 sulfur, 1 molybdenum, 1 homocitrate, and 1 unidentified light atom. To investigate whether NifUS are required for FeMo-co biosynthesis and to understand at what level(s) they might participate in this process, we analyzed the effect of nifU and nifS mutations on the formation of active NifB protein and on the accumulation of NifB-co, an isolatable intermediate of the FeMo-co biosynthetic pathway synthesized by the product of the nifB gene. The nifU and nifS genes were required to accumulate NifB-co in a nifN mutant background. This result clearly demonstrates the participation of NifUS in NifB-co synthesis and suggests a specific role of NifUS as the major provider of [Fe-S] clusters that serve as metabolic substrates for the biosynthesis of FeMo-co. Surprisingly, although nifB expression was attenuated in nifUS mutants, the assembly of the [Fe-S] clusters of NifB was compensated by other non-nif machinery for the assembly of [Fe-S] clusters, indicating that NifUS are not essential to synthesize active NifB.     

Elicitation of thiomolybdates from the iron-molybdenum cofactor of nitrogenase. Comparison with synthetic Fe-Mo-S complexes

Aerial oxidation of the iron-molybdenum cofactor (FeMoco) of Azotobacter vinelandii nitrogenase has been shown to yield either the tetrathiomolybdate ion ([MoS4]2-) or the oxotrithiomolybdate ion ([MoOS3]2-), depending on the reaction conditions. Thus, when N-methylformamide (NMF) solutions of FeMoco either were titrated with measured aliquots of air or were diluted with air-saturated NMF, [MoOS3]2- was found to be the predominant product while dilution of NMF solutions of FeMoco with air-saturated methanol produced [MoS4]2- almost exclusively. Similar aerial oxidation of solutions of chemically synthesized Fe-Mo-S clusters showed that significant information about the molybdenum environment in these species could be deduced from the nature of the elicited thiomolybdates. The differences in decomposition products as a function of solvent are postulated to be due to the loss through precipitation of the reducing agent sodium dithionite on addition of methanol but not NMF. These overall decomposition results are discussed in the context of recent X-ray absorption spectroscopic data which suggest the presence of an 'MoS3' core in FeMoco. A possible mechanism whereby [MoS4]2- might be rapidly formed from this core is presented.     

Iron K-edge X-ray absorption spectroscopy of the iron-molybdenum cofactor of nitrogenase from Klebsiella pneumoniae.

Iron K-edge X-ray absorption data for the iron-molybdenum cofactor ('FeMoco') from Klebsiella pneumoniae reported here provide the first evidence for long-range structural order in the cofactor [Fe...Fe(Mo) = 0.368 nm in addition to Fe...S = 0.22 nm and Fe...Fe(Mo) = 0.27 nm] and, in contrast with previously published data [Antonio, Teo, Orme-Johnson, Nelson, Groh, Lindahl, Kauzlarich & Averill (1982) J. Am. Chem. Soc. 104, 4703-4705], indicate that most of the iron centres are not co-ordinated to light (oxygen, nitrogen) atoms. This demonstrates that presently available chemical models for FeMoco are inadequate.     

Fluorine-19 chemical shifts as probes of the structure and reactivity of the iron-molybdenum cofactor of nitrogenase

The reaction of the iron-molybdenum cofactor with thiolate and the redox behavior of the iron-molybdenum cofactor-thiolate complex have been studied by 19F NMR using p-CF3C6H4S- as the reporter ligand. These experiments give results different from those produced by other methods which have been performed near 4 K rather than at ambient temperature. Specifically, these data show that the iron-molybdenum cofactor-thiolate complex is not the product of an irreversible reaction. Rather, the complex is in dynamic equilibrium with the free iron-molybdenum cofactor and free thiolate. Models of the reactions of nitrogenase may need to take this temperature-dependent difference into account because the lability of the iron-molybdenum thiolate bond means its making and breaking could be involved in substrate binding or reduction. The 19F NMR results reported here also show that the S = 3/2 state of the iron-molybdenum cofactor-thiolate complex can be easily and reversibly oxidized by one electron. However, electron exchange between the oxidized and reduced states of the complex is quite slow at approximately 1 mM. Based on low temperature spectroscopic studies, the oxidized iron-molybdenum cofactor-thiolate complex was expected to be diamagnetic. Isotropically shifted NMR spectra of the oxidized cofactor samples at 240-320 K, however, indicate at least partial population of a paramagnetic state, possibly with S = 1.     

Isolated iron-molybdenum cofactor of nitrogenase exists in multiple forms in its oxidized and semi-reduced states

Electrochemical and EPR spectroscopic experiments demonstrate that the isolated iron-molybdenum cofactor from the molybdenum-iron protein of nitrogenase from Azotobacter vinelandii exists in multiple forms in both its oxidized and semi-reduced states. The particular forms found in either oxidation state appear to be a function of the acid/base status of the solvent, N-methylformamide. In "alkaline" N-methylformamide, a single, detectable form of iron-molybdenum cofactor is observed for both oxidized and semi-reduced states. The semi-reduced form, termed R(s-r), is the one previously recognized with an S = 3/2 EPR spectrum with apparent g values of 4.6, 3.4, 2.0. Its oxidized counterpart, termed B(ox), is characterized electrochemically by a differential pulse voltammetric reduction peak at -0.37 V versus the normal hydrogen electrode. In "acidic" solvent, two distinct, previously unrecognized redox pairs of iron-molybdenum cofactor forms exist. The two semi-reduced forms, N(s-r) and W(s-r), are characterized by EPR spectra with g = 4.5, 3.6, 2.0 and g = 4.9, 3.1, 1.9, respectively. Their oxidized counterparts, A(ox) and C(ox), have differential pulse voltammetric reduction peaks at -0.32 and -0.43 V versus the normal hydrogen electrode, respectively. Manipulations of either the isolation protocol or the sample conditions affects both the type and distribution of forms present. Each form likely corresponds to a biologically significant state of the cofactor cluster within the protein.     

Low-temperature magnetic-circular-dichroism spectroscopy of the iron-molybdenum cofactor and the complementary cofactor-less MoFe protein of Klebsiella pneumoniae nitrogenase

The major metal clusters of the MoFe protein, Kpl , of Klebsiella pneumoniae nitrogenase were characterized separately by low-temperature magnetic-circular-dichroism spectroscopy. The spectra and magnetization curves of the extracted iron-molybdenum cofactor, FeMoco , and of 'P' clusters in NifB - Kpl , the inactive, FeMoco -less, MoFo protein from an nifB mutant, were measured and compared with those of the holoprotein. (When FeMoco and NifB - Kpl are combined, active Kpl is formed.) Reduced NifB - Kpl had a spectrum with a weak, paramagnetic, component superimposed on a diamagnetic background. The paramagnetic component was assigned to a contaminating, e.p.r.-active, species. Thionine-oxidized NifB - Kpl had a spectrum and magnetization properties very similar to those of thionine-oxidized Kpl , demonstrating that the 'P' clusters are not significantly affected by the absence of the FeMoco clusters. The spectra of reduced isolated FeMoco had similar magnetization curves but sharper features and higher intensities than those of this centre in dithionite-reduced Kpl . Furthermore, a shoulder near 580 nm in the Kpl spectrum was absent from that of FeMoco . This may be due to the loss of a ligand or to a change in symmetry of the FeMoco cluster on extraction.     

nifV-dependent, low-molecular-weight factor required for in vitro synthesis of iron-molybdenum cofactor of nitrogenase.

The molybdate- and ATP-dependent in vitro synthesis of the iron-molybdenum cofactor of nitrogenase requires a low-molecular-weight factor. The factor is present in extracts of nitrogen fixation-derepressed cultures of Klebsiella pneumoniae and Azotobacter vinelandii, but not in extracts of repressed cultures of these bacteria. Analysis of K. pneumoniae Nif mutants has indicated that the nifV gene product is the only nif protein (besides nifA) necessary for the synthesis and accumulation of the factor. The factor is stable to oxygen, temperatures below 120 degrees C, and extremely acidic and basic conditions. The activity of the factor was completely destroyed by dry ashing or digestion with sulfuric acid. The factor has been partially purified by filtration through an Amicon PM-10 DIAFLO membrane and chromatography on DEAE-cellulose, hydroxylapatite, silica gel, and Sephadex G-25.     

Requirement of NifX and other nif proteins for in vitro biosynthesis of the iron-molybdenum cofactor of nitrogenase

The iron-molybdenum cofactor (FeMo-co) of nitrogenase contains molybdenum, iron, sulfur, and homocitrate in a ratio of 1:7:9:1. In vitro synthesis of FeMo-co has been established, and the reaction requires an ATP-regenerating system, dithionite, molybdate, homocitrate, and at least NifB-co (the metabolic product of NifB), NifNE, and dinitrogenase reductase (NifH). The typical in vitro FeMo-co synthesis reaction involves mixing extracts from two different mutant strains of Azotobacter vinelandii defective in the biosynthesis of cofactor or an extract of a mutant strain complemented with the purified missing component. Surprisingly, the in vitro synthesis of FeMo-co with only purified components failed to generate significant FeMo-co, suggesting the requirement for one or more other components. Complementation of these assays with extracts of various mutant strains demonstrated that NifX has a role in synthesis of FeMo-co. In vitro synthesis of FeMo-co with purified components is stimulated approximately threefold by purified NifX. Complementation of these assays with extracts of A. vinelandii DJ42. 48 (DeltanifENX DeltavnfE) results in a 12- to 15-fold stimulation of in vitro FeMo-co synthesis activity. These data also demonstrate that apart from the NifX some other component(s) is required for the cofactor synthesis. The in vitro synthesis of FeMo-co with purified components has allowed the detection, purification, and identification of an additional component(s) required for the synthesis of cofactor.     

Accumulation of 55Fe-labeled precursors of the iron-molybdenum cofactor of nitrogenase on NifH and NifX of Azotobacter vinelandii

Iron-molybdenum cofactor (FeMo-co) biosynthesis involves the participation of several proteins. We have used (55)Fe-labeled NifB-co, the specific iron and sulfur donor to FeMo-co, to investigate the accumulation of protein-bound precursors of FeMo-co. The (55)Fe label from radiolabeled NifB-co became associated with two major protein bands when the in vitro FeMo-co synthesis reaction was carried out with the extract of an Azotobacter vinelandii mutant lacking apodinitrogenase. One of the bands, termed (55)Fe-labeled upper band, was purified and shown to be NifH by immunoblot analysis. The (55)Fe-labeled lower band was identified as NifX by N-terminal sequencing. NifX purified from an A. vinelandii nifB strain showed a different electrophoretic mobility on anoxic native gels than did NifX with the FeMo-co precursor bound.     

Determination of ligand binding constants for the iron-molybdenum cofactor of nitrogenase: monomers, multimers, and cooperative behavior

Equilibrium titrations in N-methylformamide (NMF) of G-25 gel filtered (ox)-state FeMo cofactor [FeMoco(ox)] from Azotobacter vinelandii nitrogenase were carried out using sodium ethanethiolate and followed using UV/Vis absorption spectroscopy. For Fe-Moco(ox), a non-linear least squares (NLLSQ) fit to the data indicated a strong equilibrium thiolate-binding step with Keq = 1.3+/-0.2x10(6) M(-1). With 245 molar excess imidazole, cooperative binding of three ethanethiolates was observed. The best NLLSQ fit gave Keq=2.0+/-0.1x10(5) M(-2) and a Hill coefficient n=2.0+/-0.3. A Scatchard plot of these data was concave upward, indicating positive cooperativity. The fit to previously published data involving benzenethiol titration of the one-electron reduced (semi-reduced) cofactor, FeMoco(sr), as followed by EPR required a model that included both a sub-stoichiometric ratio of thiol to FeMoco(sr) and about five cooperative ligand binding sites. These constraints were met by modeling FeMoco(sr) as an aggregate, with fewer thiol binding sites than FeMoco(sr) units. The best fit model was that of FeMoco(sr) as a dodecamer with five cooperative benzenethiol binding sites, yielding a thiol binding constant of 3.32+/-0.09x10(4) M(-4.8) and a Hill coefficient n=4.8+/-0.6. The results of all the other published ligand titrations of FeMoco(sr) were similarly analyzed successfully in terms of equilibrium models that include both cooperative ligand binding and dimer-level aggregation. A possible structural model for FeMoco aggregation in NMF solution is proposed.