Application of in situ cage cultures of phytoplankton for monitoring heavy metal pollution in two Norwegian fjords

A simple apparatus for in situ use of the cage culture technique for growing planktonic algae has been developed and used to follow growth and metal uptake of three diatoms in two Norwegian fjords polluted by heavy metals. Continuous pumping of sea water through a chelating resin and continuous water sampling was used to obtain average values for dissolved and particulate heavy metal content at the various test sites. The metals investigated (zinc, copper, lead, cadmium, and mercury) showed differences in the proportion of dissolved to particulate fractions.The three species of diatoms tested gave systematic growth responses to heavy metal pollution in the moderately polluted fjord; one alga died, one showed reduced growth rate at the more contaminated site compared with those at less polluted sites, while the most tolerant alga was apparently not affected. In the heavily polluted fjord only the most tolerant alga survived, showing decreasing growth rate with increasing pollution.Uptake of heavy metals increased generally with increasing heavy metal content in the sea water. The contents in the algae grown in the most polluted fjord were much higher than those obtained in the less polluted fjord, which were higher than the contents reported for algae from non-contaminated areas.     

Comparisons of nine heavy metals in salt gland and liver of greater scaup (Aythya marila), black duck (Anas rubripes) and mallard (A. platyrhynchos)

Levels of nine heavy metals were measured in the livers and salt glands of greater scaup (Aythya marila), black duck (Anas rubripes) and mallard (A. platyrhynchos) from Raritan Bay, New Jersey to determine if the functioning avian salt gland concentrates heavy metals. Heavy metals examined were cadmium, cobalt, chromium, copper, lead, mercury, manganese, nickel and zinc. Heavy metal levels varied significantly by species and tissue for chromium, copper, lead, and manganese, and by tissue for cobalt, mercury, nickel and zinc. In comparing tissues cobalt was higher in the salt glands than in livers of all three species; chromium and nickel were higher in the salt gland than liver for mallard and black duck; and lead, manganese and zinc were higher in the liver than the salt gland in greater scaup. Generally metal levels were higher in the salt gland for mallard and black duck, and in the liver for greater scaup.     

The performance of vetivers (Chrysopogon zizaniodes and Chrysopogon nemoralis) on heavy metals phytoremediation: laboratory investigation

Abstract

Phytoremediation with vetiver was investigated in relation to heavy metal contaminated soil in Thailand. The work compared the performance of two species of vetiver named Songkhla 3 (Chrysopogon zizaniodes) and Prachuap Khiri Khan (Chrysopogon nemoralis) in absorbing lead, zinc, and cadmium in contaminated soils. Toxicity Characteristic Leaching Procedure (TCLP), and Allium tests were conducted to determine toxicity of treated soil. Ethylenediaminetetraacetic acid (EDTA) was also used to increase heavy metals concentration in solution in soil, which led to an increase in translocation and bioaccumulation factors. In general, results showed that concentration of heavy metals decreased in soil and increased in both the shoots and roots of vetivers during a 4-month treatment period. TCLP results indicated that the concentration of zinc and cadmium in contaminated soil was reduced over treatment time, and significantly increased after EDTA was applied. To confirm vetiver performance in phytoremediation, Allium testing showed that remained heavy metals in treated soils had no effect on nucleus aberration. Songkhla 3 and Prachuap Khiri Khan showed similar trends in their ability to remediate lead, zinc, and cadmium from contaminated soil. Both species could accumulate higher concentrations of heavy metals in their shoots and roots over time, and with EDTA application.     

Application of Freundlich and Langmuir models to multistage purification process to remove heavy metal ions by using Schizomeris leibleinii

The adsorption of iron(III), lead(II) and cadmium(II) ions onto Schizomeris leibleinii, a green alga, was studied with respect to initial pH, temperature, initial metal ion and biomass concentration to determine the optimum adsorption conditions. Optimum initial pH for iron(III), lead(II) and cadmium(II) ions were 2.5, 4.5 and 5.0 at optimum temperature 30°C, respectively. The initial adsorption rates increased with increasing initial iron(III), lead(II) and cadmium(II) ion concentrations up to 100, 100 and 150 mg l⁻¹, respectively. The Freundlich and Langmuir adsorption isotherms were developed at various initial pH and temperature values. The adsorption of these metal ions to S. leibleinii was investigated in a two-stage mixed batch reactor. The residual metal ion concentrations (C_eq) at equilibrium at each stage for a given ‘quantity of dried algae (X₀)/volume of solution containing heavy metal ion (V₀)’ ratio were calculated using Freundlich and Langmuir isotherm constants. The experimental biosorption equilibrium data for iron(III), lead(II) and cadmium(II) ions were in good agreement with those calculated by both Freundlich and Langmuir models. The adsorbed iron(III), lead(II) and cadmium(II) ion concentrations increased with increasing X₀/V₀ ratios while the adsorbed metal quantities per unit mass of dried algae decreased.     

Heavy metal uptake capacities by the common freshwater green alga Cladophora fracta

Macroalgae have received much attention for heavy metal removal in treatment of domestic wastewater. In this report, the uptake capacity of a common freshwater green alga, Cladophora fracta, for heavy metal ions (copper, zinc, cadmium, and mercury) was evaluated. The equilibrium adsorption capacities were 2.388?mg Cu²⁺, 1.623?mg Zn²⁺, 0.240?mg Cd²⁺, and 0.228?mg Hg²⁺ per gram of living algae at 18°C and pH?5.0. The removal efficiency for Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ were 99, 85, 97, and 98%, respectively. Greater removal efficiency was achieved when the concentrations of metal ions were at very low level. The results indicated that living algae are suitable for removal and recovery of heavy metal ions from aqueous solutions and can be a potential tool to treat industrial wastewater.     

Application of Anodic Stripping Voltammetry for Zinc, Copper, and Cadmium Quantification in the Aqueous Humor: Implications of Pseudoexfoliation Syndrome

Anodic stripping voltammetric (ASV) procedure, using mercury film electrode, was optimized and applied to determine the concentrations of zinc, cadmium, and copper in the aqueous humor. Concentration levels as low as 1 ppb of the test metals was possible to be detected using short electrolysis times (120 s) and microquantities of aqueous humor (up to 35 μL). As a first application of the voltammetric analysis of trace metals in the aqueous humor, the role of the three selected trace elements in the pseudoexfoliation (PEX) syndrome was examined. Samples from aqueous humor were collected during cataract extraction from patients with and without PEX. The zinc and copper concentration levels in the aqueous humor did not show statistically significant difference in the study and control group. Cadmium was detected in a small number of samples, without however statistical differences between the two groups. ASV proved to be a highly precise and sensitive tool for the quantification of heavy metal ions in aqueous humor. Further studies may lead to useful conclusions for the role of zinc, copper, or cadmium in PEX syndrome.     

Advances in biosorption of metals: Selection of biomass types

Abstract: Within the past decade, the potential of metal biosorption has been well established. For economic reasons, of particular interest are abundant biomass types either generated as a waste by-product of large-scale industrial fermentations or certain metal-binding algae found in large quantities in the sea. Some of these high metal-sorbing biomass types serve as a basis for newly developed metal biosorption processes foreseen particularly as a very competitive means for detoxification of metal-bearing industrial effluents. Ions of lead and cadmium, for instance, have been found to be bound very efficiently from very dilute solutions by the dried biomass of some ubiquitous brown marine algae such as Ascophyllum and Sargassum which accumulate more than 30% of biomass dry weight in the metal. Mycelia of industrially steroid-transforming fungi Rhizopus and Absidia are excellent biosorbents lbr lead, cadmium, copper, zinc, and uranium, binding also other heavy metals up to 25% of the biomass dry weight. The common yeast Saccharomyces cerevisiae is a 'mediocre' metal biosorbent. Construction of biosorption isotherm curves serves as a basic technique assisting in evaluation of the metal uptake by different biosorbents. The methodology is based on batch equilibrium sorption experiments extensively used for screening and quantitative comparison of new biosorbent materials. Experimental methodologies used in the study of biosorption and selected recent research results demonstrate the route to novel biosorbent materials some of which can even be repeatedly regenerated for re-use.     

Trace metals with seasonal considerations in coastal algae and molluscs from Beirut,Lebanon

Twelve species of intertidal algae and molluscs from Ras Beirut, Lebanon have been investigated for their heavy metal content. Atomic absorption spectrophotometric analysis showed that the algae and molluscs concentrated similar levels of most metals. However, of the twelve organisms, Brachydontes variabilis had the highest copper, Patella coerulea and Colpomenia sinuosa had the highest iron, and Pinctada radiata had the highest zinc values with rather elevated cadmium. Cystoseira spinosa concentrated the lowest levels of zinc, and nickel was variable in all organisms.Seasonal comparisons of metal levels were also considered in three algae and three molluscs studied previously. The only signs of seasonal variation in the algae were with nickel and iron in Halimeda tuna and lead in Pterocladia pinnata. Both cadmium and lead were generally lowest in the spring samples of the algae. Lead and nickel concentrations in the molluscs were generally highest in the summer and lowest in the spring. Slight seasonal trends were seen with lead and iron in Brachydontes variabilis and lead in Monodonta turbinata.The lack of comparison data from the Mediterranean, particularly the eastern basin, makes it essential that studies of this nature be continued.     

Comparative study of biosorption of heavy metals using different types of algae

Sorption capacity of six different algae (green, red and brown) was evaluated in the recovery of cadmium, nickel, zinc, copper and lead from aqueous solutions. The optimum sorption conditions were studied for each monometallic system. The optimum pH was 6 for the recovery of Cd, Ni and Zn, and less than 5 for Cu and Pb. The best results were obtained with the lowest biomass concentration used (0.5 g/L). Experimental data fitted a Langmuir model very well according to the following sequence of the sorption values: Pb>Cd> or =Cu>Zn>Ni. The brown algae achieved the lowest metal concentration levels in solution; the best results were obtained with Fucus spiralis. Finally, a software computer program was used to simulate the process by comparison of theoretical with experimental results and show minimum differences between both types of data.     

Detection and Analysis of 12 Heavy Metals in Blood and Hair Sample from a General Population of Pearl River Delta Area

To detect the content of 12 heavy metals in blood and hair sample from a general population of Pearl River Delta area, and to analyze the influence of duration of residence, gender, age, smoking and drinking on the heavy metal content. Use inductively coupled plasma mass spectrometry to detect the content of 12 heavy metals lead (Pb), mercury (Hg), cadmium (Cd), aluminum (Al), arsenic (As), copper (Cu), chrome (Cr), manganese (Mn), nickel (Ni), zinc (Zn), tin (Sn) and antimony (Sb) in blood and hair samples of a total of 50 subjects from a general population, collected by multistage stratified cluster random sampling method. The geometric mean of heavy metal content in blood samples of general population (μg/L): blood aluminum 214.00; blood chrome 92.82; blood manganese 21.43; blood nickel 20.59; blood copper 0.67; blood zinc 11.50; blood arsenic 0.55; blood cadmium 2.45; blood tin 0.00; blood antimony 1.92; blood lead 158.84; and blood mercury 1.19. The geometric mean of heavy metal content in hair samples of general population (μg/g): hair aluminum is 84.65; hair chrome 0.00; hair manganese 2.44; hair nickel 0.61; hair copper 28.49; hair zinc 136.65; hair arsenic 0.75; hair cadmium 0.46; hair tin 1.04; hair antimony 0.05; hair lead 8.97; and hair mercury 0.69. Some heavy metals were correlated with duration of residence, gender, age, smoking and drinking. This was the first time that simultaneously detecting heavy metal content in blood and hair was used to analyze the internal heavy metal burden in resident population of Pearl River Delta area. These data can serve as reference for further research.     

In vitro study on the interactive effects of heavy metals on catalase activity of Sarotherodon mossambicus (Peters)

The in vitro effects of individual heavy metal ions as well as their combinations on catalase activity were investigated. Copper was found to be the strongest inhibitor of catalase activity followed by mercury, iron, chromium and cadmium. Copper toxicity on catalase activity was reduced in the presence of all the other metal ions. However, the addition of cadmium, chromium, iron, manganese, lead to mercury and cadmium, iron, manganese, nickel, lead, zinc to chromium increased their inhibitory effects on catalase activity.     

Resistance to and uptake of heavy metals in mushrooms

Resistance levels to heavy metals in 21 mushrooms obtained mainly from Japan, but also from Thailand, were tested. The mushrooms were 7 Pleurotus species, 2 Pycnoporus and Pholiota species and one each of Agrocybe, Cryptoporus, Coriolus, Inonotus, Lampteromyces, Grifola, Flammulina, Lyophyllum, Agaricus, and Polyporus species. The Pleurotus species strains showed higher resistance to the heavy metals, copper, cadmium, zinc, nickel, cobalt, mercury than the other species. Pleurotus ostreatus exhibited the highest resistance to all these heavy metals. Pholiota species, Flammulina veltipes, Lyophyllum ulmarium, Agaricus bisporus and Polyporus arcularius were rather sensitive to all the metals tested. The accumulation of copper, zinc and cadmium in Pleurotus ostreatus was studied. The uptake of heavy metals into the mycelia of P. ostreatus increased proportionally to an increasing concentration of these metals in the medium.     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

Heavy metals in some Chinese herbal plants

The concentrations of nine heavy metals, cadmium, cobalt, copper, iron, manganese, nickel, lead, zinc and mercury in 42 Chinese herbal medicinal plants were determined. Generally, all the samples studied had, relative to the other trace metals, higher concentrations of iron, manganese, and zinc. The concentration range of the metals determined was comparable to that in many of the East Asian vegetables and fruits. A few samples were found to contain relatively higher concentrations of the toxic metals such as cadmium, lead, and mercury. This was probably caused by contamination during air-drying and preservation.     

Accumulation and Regulation Effects from the Metal Mixture of Zn, Pb, and Cd in the Tropical Shrimp Penaeus vannamei

Environmental metal pollution is one of the major problems faced by humankind. This type of pollution affects aquatic systems (estuaries, coastal lagoons, etc.), which are very dynamic systems, therefore making the study of the effects on the organisms that inhabit them an essential issue. In this study, the capacity of metal regulation by decapod crustacean Penaeus vannamei juveniles was determined. The effects of zinc, lead, and cadmium were tested individually and as a metal mixture exposure to determine possible synergism. The results showed that juvenile shrimps were capable of regulating zinc and lead, whereas cadmium was accumulated without any excretion, at least within the concentrations studied. It was also proved that under the estuarine conditions tested here, P. vannamei juveniles showed capacity to act as a bioindicator for cadmium.     

木本植物对大气重金属污染物耐性的研究

本文在污染现场调查研究、试验研究和单一毒物接触试验的大量数据基础上,论述了木本植物对大气重金属污染物一一铅、镉、铜、锌的耐性。查明了大气重金属污染物引起叶片可见伤害症状需要很高的剂量。糖槭以2000ppm硝酸铅溶液浸泡涂抹枝叶,三天后出现轻度可见伤害症状,叶中铅积累量高达802ppm。旱柳以500ppm氯化镉溶液浸泡涂抹枝叶,叶中积累量达66ppm,十天内未出现可见症状。大气重金属污染物——铅、镉、铜、锌对叶片造成的急性伤害症状是相似的,而与土壤中相同污染物引起的急性伤害具有差别。木本植物对大气重金属污染物的耐性很强,在以大气重金属污染为主的复合污染现场,一些幼龄树木的叶片吸铅量达500—800ppm,超过背景浓度的120倍;吸镉量10—18ppm,超过背景浓度的139倍,吸铜量100—239ppm,超过背景浓度的5—12倍,吸锌量500—700ppm,超过背景浓度的9—20倍只出现较轻的受害症状。在相对清洁区,对幼树叶片进行单一毒物接触试验,一些主要绿化树木的叶片吸铅量达200—600ppm,吸镉量20—60ppm并不出现可见症状。木本植物对大气重金属污染物具有较强的耐性,因而为生物防治大气重金属污染开辟了广阔的前景。     

单一与复合污染条件下两种敏感性植物对Cd、Zn、Pb的吸收效应

为了进一步研究镉、锌、铅 3种重金属元素间的相互作用以及对植物吸收重金属能力的影响 ,在模拟单一重金属污染试验研究的基础上 ,采用正交回归设计方案 ,研究了 Cd、Zn、Pb复合污染情况下紫花苜蓿和披碱草两种敏感性植物对 3种重金属的吸收效应。结果表明 ,在单一污染条件下 ,镉元素对紫花苜蓿生长的影响大于锌、铅 ,铅元素对披碱草生长的影响大于锌、镉 ;紫花苜蓿对于镉的吸收累积显著高于披碱草 ,植物内镉元素浓度最高达到 1 0 88.5 mg/kg,而披碱草对于铅元素的吸收则高于紫花苜蓿 ,植物内铅元素浓度最高达到 1 3 4 5 .5 mg/kg。在复合污染条件下 ,两种植物对铅、锌和铅、镉的吸收在不同浓度范围内分别存在存在着协同效应和拮抗效应 ;同时两种植物对锌、镉元素在实验涉及浓度范围内都存在着拮抗效应。这对于深入研究复合污染条件下重金属的土壤环境化学行为 ,对植物的综合毒性以及不同植物对重金属的吸收累积效应等 ,具有一定的参考意义     

土壤中镉、铅、锌及其相互作用对作物的影响

通过作物盆栽模拟试验(砂壤质褐土、pH值8.2)揭示：土壤中分别施入镉(CdCl2)、铅[Pb(CH3COO)2]或锌(ZnSO4)其影响表现为,植物各器官镉的含量超过对照植物的数倍至500倍。土壤镉浓度<5ppm和<10ppm分别造成某些蔬菜和水稻的污染。铅主要积累在植物根部,土壤铅污染对作物的影响较小。锌主要积累在植物叶片和根部,对水稻产生生长抑制的土壤锌浓度临界值不大于200ppm,此浓度对旱作无影响。土壤中同时施入镉和铅,植物对镉的吸收增加。而土壤中镉的增加却减少了植物体内铅的含量。土壤中由于镉、锌或铅、锌相互作用的结果,水稻对它们的吸收都有增加。在旱地土壤锌浓度的增高,降低了植物对镉、铅的吸收。镉、铅、锌同时施入土壤由于相互作用的结果,除锌之外,植物对镉、铅的吸收有明显下降。评价土壤重金属污染,不仅要看它们的含量及其存在形态,而且要分析它们之间的相互作用(促进或拮抗)特点。     

Effects of heavy metals on motility and gravitactic orientation of the flagellate, Euglena gracilis

The effects of copper, mercury, cadmium and lead on the gravitactic orientation of the photosynthetic flagellate Euglena gracilis were investigated. The first two heavy metals reverse the direction of downward swimming (positive gravitaxis) in young cultures (up to 8 days) to an upward swimming (negative gravitaxis); cadmium produced a less pronounced effect. Higher concentrations of heavy metals decrease the precision of orientation as compared to the control due to frequent deviations of the cells from straight paths. Higher concentrations also decrease the swimming velocity of the populations. When the cells were growing in the presence of the heavy metal, copper was effective at > or = 50 microM, cadmium at > or = 3 microM and mercury at > or = 1 microM. Since lead formed insoluble precipitations with the acetate in the growth medium it was tested after the cells were transferred into Tris buffer. Under these conditions lead did not affect the direction of movement or the precision of orientation up to a concentration of 300 microM in the time up to 24 h after the addition of the heavy metal. However, high concentrations of lead strongly decreased the swimming speed of the cells, which was partially reversed with time.     

Blood and placental concentrations of cadmium, lead, and mercury in mothers and their newborns

Placental transfer of cadmium, lead and mercury was studied under the conditions of environmental exposures of pregnant women to these heavy metals. Fifty pregnant women from industrial area and a similar control group from a semirural area were examined. Cadmium, lead and total mercury levels were determined in maternal erythrocytes and plasma, in placenta, and in erythrocytes and plasma of umbilical cord blood using atomic absorption spectrophotometry. Except for the cadmium plasma concentration in the control area, levels of the three metals were higher in maternal than in cord blood. The mean plasma values (arithmetic mean) of cadmium, lead, and mercury in industrial area were 0.53, 6.37, and 0.37 micrograms.100 ml-1 in maternal blood and 0.30, 4.82, and 0.31 micrograms.100 ml-1 in cord blood. Highest values of the correlation coefficients were found between the cadmium and mercury concentrations in maternal and cord blood erythrocytes. No striking effect of the place of residence of pregnant women on the heavy metal concentrations in biological materials could be found.