Insertion of Endocellulase Catalytic Domains into Thermostable Consensus Ankyrin Scaffolds: Effects on Stability and Cellulolytic Activity

Degradation of cellulose for biofuels production holds promise in solving important environmental and economic problems. However, the low activities (and thus high enzyme-to-substrate ratios needed) of hydrolytic cellulase enzymes, which convert cellulose into simple sugars, remain a major barrier. As a potential strategy to stabilize cellulases and enhance their activities, we have embedded cellulases of extremophiles into hyperstable α-helical consensus ankyrin domain scaffolds. We found the catalytic domains CelA (CA, GH8; Clostridium thermocellum) and Cel12A (C12A, GH12; Thermotoga maritima) to be stable in the context of the ankyrin scaffold and to be active against both soluble and insoluble substrates. The ankyrin repeats in each fusion are folded, although it appears that for the C12A catalytic domain (CD; where the N and C termini are distant in the crystal structure), the two flanking ankyrin domains are independent, whereas for CA (where termini are close), the flanking ankyrin domains stabilize each other. Although the activity of CA is unchanged in the context of the ankyrin scaffold, the activity of C12A is increased between 2- and 6-fold (for regenerated amorphous cellulose and carboxymethyl cellulose substrates) at high temperatures. For C12A, activity increases with the number of flanking ankyrin repeats. These results showed ankyrin arrays to be a promising scaffold for constructing designer cellulosomes, preserving or enhancing enzymatic activity and retaining thermostability. This modular architecture will make it possible to arrange multiple cellulase domains at a precise spacing within a single polypeptide, allowing us to search for spacings that may optimize reactivity toward the repetitive cellulose lattice.     

Binding modules alter the activity of chimeric cellulases: Effects of biomass pretreatment and enzyme source

Improving the catalytic activity of cellulases requires screening variants against solid substrates. Expressing cellulases in microbial hosts is time‐consuming, can be cellulase specific, and often leads to inactive forms and/or low yields. These limitations have been obstacles for improving cellulases in a high‐throughput manner. We have developed a cell‐free expression system and used it to express 54 chimeric bacterial and archaeal endoglucanases (EGs), with and without cellulose binding modules (CBMs) at either the N‐ or C‐terminus, in active enzyme yields of 100–350 µg/mL. The platform was employed to systematically study the role of CBMs in cellulose hydrolysis toward a variety of natural and pretreated solid substrates, including ionic‐liquid pretreated Miscanthus and AFEX‐pretreated corn stover. Adding a CBM generally increased activity against crystalline Avicel, whereas for pretreated substrates the effect of CBM addition depended on the source of cellulase. The cell‐free expression platform can thus provide insights into cellulase structure‐function relationships for any substrate, and constitutes a powerful discovery tool for evaluating or engineering cellulolytic enzymes for biofuels production. Biotechnol. Bioeng. 2010;107:601–611. © 2010 Wiley Periodicals, Inc.     

Bioconversion of lignocellulosic biomass: biochemical and molecular perspectives

In view of rising prices of crude oil due to increasing fuel demands, the need for alternative sources of bioenergy is expected to increase sharply in the coming years. Among potential alternative bioenergy resources, lignocellulosics have been identified as the prime source of biofuels and other value-added products. Lignocelluloses as agricultural, industrial and forest residuals account for the majority of the total biomass present in the world. To initiate the production of industrially important products from cellulosic biomass, bioconversion of the cellulosic components into fermentable sugars is necessary. A variety of microorganisms including bacteria and fungi may have the ability to degrade the cellulosic biomass to glucose monomers. Bacterial cellulases exist as discrete multi-enzyme complexes, called cellulosomes that consist of multiple subunits. Cellulolytic enzyme systems from the filamentous fungi, especially Trichoderma reesei, contain two exoglucanases or cellobiohydrolases (CBH1 and CBH2), at least four endoglucanases (EG1, EG2, EG3, EG5), and one β-glucosidase. These enzymes act synergistically to catalyse the hydrolysis of cellulose. Different physical parameters such as pH, temperature, adsorption, chemical factors like nitrogen, phosphorus, presence of phenolic compounds and other inhibitors can critically influence the bioconversion of lignocellulose. The production of cellulases by microbial cells is governed by genetic and biochemical controls including induction, catabolite repression, or end product inhibition. Several efforts have been made to increase the production of cellulases through strain improvement by mutagenesis. Various physical and chemical methods have been used to develop bacterial and fungal strains producing higher amounts of cellulase, all with limited success. Cellulosic bioconversion is a complex process and requires the synergistic action of the three enzymatic components consisting of endoglucanases, exoglucanases and β-glucosidases. The co-cultivation of microbes in fermentation can increase the quantity of the desirable components of the cellulase complex. An understanding of the molecular mechanism leading to biodegradation of lignocelluloses and the development of the bioprocessing potential of cellulolytic microorganisms might effectively be accomplished with recombinant DNA technology. For instance, cloning and sequencing of the various cellulolytic genes could economize the cellulase production process. Apart from that, metabolic engineering and genomics approaches have great potential for enhancing our understanding of the molecular mechanism of bioconversion of lignocelluloses to value added economically significant products in the future. JIMB 2008: BioEnergy - Special issue.     

Synergism of cellulase,pectinase and xylanase on hydrolyzing differently pretreated sweet potato residues

Abstract

The synergism of cellulase (C), pectinase (P), and xylanase (X) for the saccharification of sweet potato residues (SPR) was investigated. The removal of starch from SPR was easily achieved by using amylase, but the cellulose conversion of de-starched SPR was relatively low, thus dilute H₂SO₄, NaOH, and H₂O₂ pretreatment was conducted to improve the enzymatic digestibility. The lignin content of NaOH pretreated SPR was the lowest, whereas H₂SO₄ pretreatment resulted in the lowest contents of hemicellulose and pectin. The combination of C, P, and X exhibited different sugar production patterns, C–P displayed synergistic action on glucose and galactose production from each type of SPR, C–X also exhibited synergistic effect on glucose production except when H₂SO₄ pretreated SPR was used, whereas no synergism between P–X on monosaccharide production was observed. The presence of synergism between cellulase and mixed accessory enzymes [C–(PX)] on glucose formation was determined by C–X, and the degree of synergism between C–P and C–(PX) on glucose production had a positive relationship with pectin content. The highest cellulose conversion of 96.2% was obtained from NaOH pretreated SPR using mixed enzymes comprising C, P, and X with the ratio of 8:1:1.     

Mechanical Unfolding of an Ankyrin Repeat Protein

Ankryin repeat proteins comprise tandem arrays of a 33-residue, predominantly α-helical motif that stacks roughly linearly to produce elongated and superhelical structures. They function as scaffolds mediating a diverse range of protein-protein interactions, and some have been proposed to play a role in mechanical signal transduction processes in the cell. Here we use atomic force microscopy and molecular-dynamics simulations to investigate the natural 7-ankyrin repeat protein gankyrin. We find that gankyrin unfolds under force via multiple distinct pathways. The reactions do not proceed in a cooperative manner, nor do they always involve fully stepwise unfolding of one repeat at a time. The peeling away of half an ankyrin repeat, or one or more ankyrin repeats, occurs at low forces; however, intermediate species are formed that are resistant to high forces, and the simulations indicate that in some instances they are stabilized by nonnative interactions. The unfolding of individual ankyrin repeats generates a refolding force, a feature that may be more easily detected in these proteins than in globular proteins because the refolding of a repeat involves a short contraction distance and incurs a low entropic cost. We discuss the origins of the differences between the force- and chemical-induced unfolding pathways of ankyrin repeat proteins, as well as the differences between the mechanics of natural occurring ankyrin repeat proteins and those of designed consensus ankyin repeat and globular proteins.     

Prospecting for cellulolytic activity in insect digestive fluids

Efficient cellulolytic enzymes are needed to degrade recalcitrant plant biomass during ethanol purification and make lignocellulosic biofuels a cost-effective alternative to fossil fuels. Despite the large number of insect species that feed on lignocellulosic material, limited availability of quantitative studies comparing cellulase activity among insect taxa constrains identification of candidate species for more targeted identification of effective cellulolytic systems. We describe quantitative determinations of the cellulolytic activity in gut or head-derived fluids from 68 phytophagous or xylophagous insect species belonging to eight different taxonomic orders. Enzymatic activity was determined for two different substrates, carboxymethyl cellulose (CMC) and microcrystalline cellulose (MCC), approximating endo-β-1,4-glucanase and complete cellulolytic activity, respectively. Highest CMC gut fluid activities were found in Dictyoptera, Coleoptera, Isoptera, and Orthoptera, while highest MCC gut fluid activities were found in Coleoptera, Hymenoptera, Lepidoptera, and Orthoptera. In most cases, gut fluid activities were greater with CMC compared to MCC substrate, except in Diptera, Hymenoptera, and Lepidoptera. In contrast, cellulolytic activity levels in most head fluids were greater on the MCC substrate. Our data suggests that a phylogenetic relationship may exist for the origin of cellulolytic enzymes in insects, and that cellulase activity levels correlate with taxonomic classification, probably reflecting differences in plant host or feeding strategies.     

Structure of the Legionella effector AnkX reveals the mechanism of phosphocholine transfer by the FIC domain

The FIC motif and the eukaryotic‐like ankyrin repeats are found in many bacterial type IV effectors, yet little is known about how these domains enable bacteria to modulate host cell functions. Bacterial FIC domains typically bind ATP and transfer adenosine monophosphate moiety onto target proteins. The ankyrin repeat‐containing protein AnkX encoded by the intracellular pathogen Legionella pneumophila is unique in that its FIC domain binds to CDP‐choline and transfers a phosphocholine residue onto proteins in the Rab1 GTPase family. By determining the structures of unbound AnkX and AnkX with bound CDP‐choline, CMP/phosphocholine and CMP, we demonstrate that the orientation of substrate binding in relation to the catalytic FIC motif enables this protein to function as a phosphocholinating enzyme rather than a nucleotidyl transferase. Additionally, the structure reveals that the ankyrin repeats mediate scaffolding interactions that resemble those found in protein–protein interactions, but are unprecedented in intramolecular interactions. Together with phosphocholination experiments, our structures unify a general phosphoryl transferase mechanism common to all FIC enzymes that should be conserved from bacteria to human.     

Ankyrin repeat-containing proteins in Arabidopsis: characterization of a novel and abundant group of genes coding ankyrin-transmembrane proteins

Ankyrin repeats are present in a great variety of proteins of eukaryotes, prokaryotes and some viruses and they function as protein-protein interaction domains. We have search for all the ankyrin repeats present in Arabidopsis proteins and determined their consensus sequence. We identified a total of 509 ankyrin repeats present in 105 proteins. Ankyrin repeat containing proteins can be classified in 16 groups of structurally similar proteins. The most abundant group contains proteins with ankyrin repeats and transmembrane domains (AtANKTM). Sequence similarity analysis indicates that these proteins are divided in six families. Some of the AtAnkTm genes are organized in tandem arrays and others are present in duplicated parts of the Arabidopsis genome. The expression of several AtAnkTm genes was analyzed resulting in a wide variety of expression patterns even within the same family. The likely functions of these proteins are discussed in comparison with the known functions of proteins with similar organization in other species.     

Purification and characteristics of xyloglucanase and five other cellulolytic enzymes from Trichoderma reesei QM9414

By combining anion-exchange chromatography with gel filtration, an effective method for purification of wild-type xyloglucanase and five other cellulolytic enzymes from strain QM9414 of Trichoderma reesei was established. Characterization by enzyme activity assay, SDS-PAGE, and mass spectrometry identified the purified proteins as cellobiohydrolases I and II, endoglucanases I and II, a xyloglucanase, and β-xylosidase, of which the xyloglucanase was purified for the first time from the mutant strain QM9414. This method holds great promise to study the mechanism of cellulolytic enzymes, to investigate the synergistic action between cellulase and other cellulolytic enzymes, and to better exploit enzyme preparations for degradation of lignocellulose.     

Novel UNC‐44 AO13 ankyrin is required for axonal guidance in C. elegans,contains six highly repetitive STEP blocks separated by seven potential transmembrane domains,and is localized to neuronal processes and the periphery of neural cell bodies

Conventional ankyrins are cortical cytoskeletal proteins that form an ankyrin‐spectrin meshwork underlying the plasma membrane. We report here the unusual structure of a novel ankyrin (AO13 ankyrin, 775,369 Da, 6994 aa, pI = 4.45) that is required for proper axonal guidance in Caenorhabditis elegans. AO13 ankyrin contains the ANK repeat and spectrin‐binding domains found in other ankyrins, but differs from all others in that the acidic carboxyl region contains six blocks of serine/threonine/glutamic acid/proline rich (STEP) repeats separated by seven hydrophobic domains. The STEP repeat blocks are composed primarily of sequences related to ETTTTTTVTREHFEPED(E/D)X_nVVESEEYSASGSPVPSE (E/K)DVE(H/R)VI, and the hydrophobic domains contain sequences related to PESGEESDGEGFGSKVLGFAKK[AGMVAGGVVAAPVALAAVGA]KAAYDALKKDDDEE, which includes a potential transmembrane domain (in brackets). Recombinant protein fragments of AO13 ankyrin were used to prepare polyclonal antisera against the spectrin‐binding domain (AO271 Ab), the conventional ankyrin regulatory domain (AO280 Ab), the AO13 ankyrin STEP domain (AO346 Ab), the AO13 ankyrin STEP + hydrophobic domain (AO289 Ab), and against two carboxyl terminal domain fragments (AO263 Ab and AO327 Ab). Western blot analysis with these Ab probes demonstrated multiple protein isoforms. By immunofluorescence microscopy, the antispectrin‐binding and regulatory domain (AO271 and AO280) antibodies recognized many cell types, including neurons, and stained the junctions between cells. The AO13 ankyrin‐specific (AO289 and AO346) antibodies showed a neurally restricted pattern, staining nerve processes and the periphery of neural cell bodies. These results are consistent with a role for AO13 ankyrin in neural development. © 2002 Wiley Periodicals, Inc. J Neurobiol 50: 333–349, 2002; DOI 10.1002/neu.10036     

The contribution of entropy, enthalpy, and hydrophobic desolvation to cooperativity in repeat-protein folding

Cooperativity is a defining feature of protein folding, but its thermodynamic and structural origins are not completely understood. By constructing consensus ankyrin repeat protein arrays that have nearly identical sequences, we quantify cooperativity by resolving stability into intrinsic and interfacial components. Heteronuclear NMR and CD spectroscopy show that these constructs adopt ankyrin repeat structures. Applying a one-dimensional Ising model to a series of constructs chosen to maximize information content in unfolding transitions, we quantify stabilities of the terminal capping repeats, and resolve the effects of denaturant into intrinsic and interfacial components. Reversible thermal denaturation resolves interfacial and intrinsic free energies into enthalpic, entropic, and heat capacity terms. Intrinsic folding is entropically disfavored, whereas interfacial interaction is entropically favored and attends a decrease in heat capacity. These results suggest that helix formation and backbone ordering occurs upon intrinsic folding, whereas hydrophobic desolvation occurs upon interfacial interaction, contributing to cooperativity.     

Enhanced cellulase production by <Emphasis Type="Italic">Trichoderma harzianum</Emphasis> by cultivation on glycerol followed by induction on cellulosic substrates

The use of glycerol obtained as an intermediate of the biodiesel manufacturing process as carbon source for microbial growth is a potential alternative strategy for the production of enzymes and other high-value bioproducts. This work evaluates the production of cellulase enzymes using glycerol for high cell density growth of Trichoderma harzianum followed by induction with a cellulosic material. Firstly, the influence of the carbon source used in the pre-culture step was investigated in terms of total protein secretion and fungal morphology. Enzymatic productivity was then determined for cultivation strategies using different types and concentrations of carbon source, as well as different feeding procedures (batch and fed-batch). The best strategy for cellulase production was then further studied on a larger scale using a stirred tank bioreactor. The proposed strategy for cellulase production, using glycerol to achieve high cell density growth followed by induction with pretreated sugarcane bagasse, achieved enzymatic activities up to 2.27 ± 0.37 FPU/mL, 106.40 ± 8.87 IU/mL, and 9.04 ± 0.39 IU/mL of cellulase, xylanase, and β-glucosidase, respectively. These values were 2 times higher when compared to the control experiments using glucose instead of glycerol. This novel strategy proved to be a promising approach for improving cellulolytic enzymes production, and could potentially contribute to adding value to biomass within the biofuels sector.     

Stimulatory effect of oxidized cellulose on cellulase formation by Trichoderma reesei

Crystalline cellulase has been electrochemically oxidized to yield preparations containing various different percentages of oxidized end-groups. These celluloses have been used as carbon sources for growth and cellulase production by Trichoderma reesei . A low content of oxidized end groups in the celluloses (0.1–0.65%) stimulated cellulase production but not growth, whereas higher contents (> 1%) where inhibitory to both. The cellulolytic enzyme system secreted under stimulated conditions contained the same proportion of individual cellulase enzymes (cellobiohydrolase I and II, endoglucanase I) as the control, indicating a general stimulatory effect of oxidized cellulose. Activity of cellulases against oxidized celluloses in vitro was not stimulated, and only slightly inhibitory at high degrees of oxidation. The data support a potential role of cellulose oxidation in regulating cellulase formation by T. reesei .     

In search of the hair-cell gating spring elastic properties of ankyrin and cadherin repeats

Mechanotransduction in vertebrate hair cells involves a biophysically defined elastic element (the "gating spring") that pulls on the transduction channels. The tip link, a fine filament made of cadherin 23 linking adjacent stereocilia in hair-cell bundles, has been suggested to be the gating spring. However, TRP channels that mediate mechanotransduction in Drosophila, zebrafish, and mice often have cytoplasmic domains containing a large number of ankyrin repeats that are also candidates for the gating spring. We have explored the elastic properties of cadherin and ankyrin repeats through molecular dynamics simulations using crystallographic structures of proteins with one cadherin repeat or 4 and 12 ankyrin repeats, and using models of 17 and 24 ankyrin repeats. The extension and stiffness of large ankyrin-repeat structures were found to match those predicted by the gating-spring model. Our results suggest that ankyrin repeats of TRPA1 and TRPN1 channels serve as the gating spring for mechanotransduction.     

Fermentation of cassava peels for the production of cellulolytic enzymes

Cassava peels were used as a substrate for the production of cellulolytic enzymes. Under solid substrate fermentation conditions and a Rhizopus sp., thermostable cellulolytic enzymes were produced. Optimal production temperature and pH were 45°C and 5.6 respectively. Kinetic studies of the enzymes showed that the cellulase C₁ activity was optimal at pH 5.0 and 50°C, whereas that of cellulase C_x was optimal at pH 7.0 and 60°C. The enzymes degraded ca 44% of sorghum grains in 6 h, thus suggesting a possible use in saccharification processes. The results also showed the possibility of re-cycling cassava peels as a cheap substrate for the enzyme industry. and accepted 6 June 1989     

Immobilization of the cellulolytic fungus Trichoderma reesei on the polymeric sorbent - Sorfix

Summary The immobilization of T. reesei mycelium on activated polymeric sorbent was investigated with respect to the intended flow-trough cellulase production. The retention of extracellular production of cellulolytic enzymes was monitored in a packed-column recycle reactor. Some factors affecting cellulase elution pattern are described.     

Studies of the ankyrin repeats of the Drosophila melanogaster Notch receptor. 2. Solution stability and cooperativity of unfolding.

To define the boundaries of the Drosophila Notch ankyrin domain, examine the effects of repeat number on the folding of this domain, and examine the degree to which the modular architecture of ankyrin repeat proteins results in modular stability, we have investigated the thermodynamics of unfolding of polypeptides corresponding to different segments of the ankyrin repeats of Drosophila Notch. We find that a polypeptide containing the six previously identified ankyrin repeats unfolds cooperatively, but is of modest stability. However, inclusion of a putative seventh, C-terminal ankyrin sequence doubles the stability of the Notch ankyrin domain (a 1000-fold increase in the folding equilibrium constant), indicating that the seventh ankyrin repeat is an important part of the Notch ankyrin domain, and demonstrating long-range interactions among ankyrin repeats. This putative seven-repeat polypeptide also shows increases in enthalpy, denaturant dependence (m-value), and heat capacity of unfolding (DeltaC(p)()) of around 50% each, suggesting that deletion of the seventh repeat results in partial unfolding of the sixth ankyrin repeat, consistent with spectroscopic and hydrodynamic data reported in the preceding paper [Zweifel, M. E., and Barrick, D. (2001) Biochemistry 40, 14344-14356]. A polypeptide consisting of only the five N-terminal repeats has stability similar to the six-repeat construct, demonstrating that stability is distributed asymmetrically along the ankyrin domain. These data are consistent with highly cooperative two-state folding of these ankyrin polypeptides, despite their modular architecture.