Rapid solid-phase peptide synthesis using thermal and controlled microwave irradiation.

A rapid and efficient microwave-assisted solid-phase synthesis method is described for the preparation of the nonapeptide WDTVRISFK, using conventional Fmoc/Bu(t) orthogonal protection strategy. The synthesis protocol is based on the use of cycles of pulsed microwave irradiation with intermittent cooling of the reaction during the removal of the Fmoc protecting group and during the coupling. The desired nonapeptide was obtained in highest yield and purity by employing MicroKan technology. The chemical reactions were carried out in a single-mode microwave reactor, equipped with a fiber-optic probe to monitor the reaction temperature continuously.     

Conventional and microwave‐assisted SPPS approach: a comparative synthesis of PTHrP(1–34)NH2

Attracted by the possibility to optimize time and yield of the synthesis of difficult peptide sequences by MW irradiation, we compared Fmoc/tBu MW‐assisted SPPS of 1–34 N‐terminal fragment of parathyroid hormone‐related peptide (PTHrP) with its conventional SPPS carried out at RT. MWs were applied in both coupling and deprotection steps of SPPS protocol. During the stepwise elongation of the resin‐bound peptide, monitoring was conducted by performing MW‐assisted mini‐cleavages and analyzing them by UPLC‐ESI‐MS. Identification of some deletion sequences was helpful to recognize critical couplings and as such helped to guide the introduction of MW irradiations to these stages. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Water‐soluble mercaptoundecanoic acid (MUA)‐coated CdTe quantum dots: one‐step microwave synthesis,characterization and cancer cell imaging

ABSTRACT: In this study, a one‐step approach for aqueous synthesis of highly luminescent semiconductors, CdTe quantum dots (QDs), using long‐chain thiols‐mercaptoundecanoic acid (MUA) as surface ligand, was developed in a microwave irradiation system. The synthetic conditions were systematically investigated. The as‐prepared MUA‐coated QDs were characterized by various spectroscopy techniques, transmission electron microscopy (TEM) and X‐ray powder diffraction (XRD). The experimental results document that MUA‐coated CdTe QDs have small diameter, good stability, high luminescence and long lifetime. Particularly, it was confirmed, using fluorescence correlation spectroscopy (FCS) that, compared with other ligand, MUA formed a thicker ligand layer on the QD surfaces, which will help their stability and conjugation with biomolecules. Furthermore, MUA‐coated QDs were successfully used for HeLa cell imaging. Copyright © 2011 John Wiley & Sons, Ltd.     

A study of conformational stability of poly(L-alanine), poly(L-valine), and poly(L-alanine)/poly(L-valine) blends in the solid state by (13)C cross-polarization/magic angle spinning NMR

13C cross-polarization/magic angle spinning (CP/MAS) NMR and (1)H T(1rho) experiments of poly(L-alanine) (PLA), poly(L-valine) (PLV), and PLA/PLV blends have been carried out in order to elucidate the conformational stability of the polypeptides in the solid state. These were prepared by adding a trifluoroacetic acid (TFA) solution of the polymer with a 2.0 wt/wt % of sulfuric acid (H(2)SO(4)) to alkaline water. From these experimental results, it is clarified that the conformations of PLA and PLV in their blends are strongly influenced by intermolecular hydrogen-bonding interactions that cause their miscibility at the molecular level.     

Polymer-supported biopolymer synthesis: 1. High load solid (gel) phase strategy for peptide synthesis with a phenolic poly(acryloylmorpholine)-based support

An efficient, low-cost, reaction strategy for the solid (gel) phase synthesis of peptides and protected peptide segments has been developed. The strategy involves the use of a new poly(acryloylmorpholine)-based phenolic support matrix, Koch-Light Peptide Resin A. Illustrative syntheses of N-terminal Boc- and Z-protected[Leu]- enkephalin derivatives, including C-terminal acid hydrazides and esters, are described. The strategy, which is effective for the synthesis of peptides at high matrix loadings, is adopted readily for large-scale application.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Induction of systemic disease resistance in Nicotiana benthamiana by the cyclodipeptides cyclo (l‐Pro‐l‐Pro) and cyclo (d‐Pro‐d‐Pro)

Cyclodipeptides, formed from two amino acids by cyclodehydration, are produced naturally by many organisms, and are known to possess a large number of biological activities. In this study, we found that cyclo (l ‐Pro‐l ‐Pro) and cyclo (d ‐Pro‐d ‐Pro) (where Pro is proline) could induce defence responses and systemic resistance in Nicotiana benthamiana. Treatment with the two cyclodipeptides led to a reduction in disease severity by Phytophthora nicotianae and Tobacco mosaic virus (TMV) infections compared with controls. Both cyclopeptides triggered stomatal closure, induced reactive oxygen species production and stimulated cytosolic calcium ion and nitric oxide production in guard cells. In addition, the application of cyclodipeptides significantly up‐regulated the expression of the plant defence gene PR‐1a and the PR‐1a protein, and increased cellular salicylic acid (SA) levels. These results suggest that the SA‐dependent defence pathway is involved in cyclodipeptide‐mediated pathogen resistance in N. benthamiana. We report the systemic resistance induced by cyclodipeptides, which sheds light on the potential of cyclodipeptides for the control of plant diseases.     

Solvent-free synthesis of chiral Schiff-base ligands based on ferrocene under microwave irradiation and application to enantioselective nitroaldol (Henry) reaction

Chiral Schiff-bases 3a-f based on ferrocene were designed and synthesized using solvent-free methods by mixing ferrocene carbaldehyde 1 with amino alcohols and amines 2a-f under microwave irradiation and classical method for the enantioselective nitroaldol (Henry) reaction. The Schiff-bases were obtained in shorter reaction times and improved yield under microwave irradiation method over classical method. The highest enantioselectivity was observed in ligand 3e (95% ee) when CH(2)Cl(2) was used as solvent.     

Cooperative binding of 2,2′‐bipyridine into polynucleotide poly(A)–poly(U‐) in an alkaline aqueous solution

UV absorption data analysis has been used to evaluate equilibrium constants of the pH‐induced interaction of 2,2′‐Bipy with polyadenylnic‐polyuridylic acid in aqueous solution. The conditional probabilities hard model has been adopted in treatment of concentration diagrams calculated by the soft modelling‐based Multivariate Curve Resolution‐Alternating Least Squares approach. Intrinsic binding constant (lgK_g = 1.93), and the cooperativity parameter (ω = 340), were calculated as the best fit. The plot of the experimental binding constant versus 2,2′‐Bipy equilibrium concentration shows two modes of ligand with polymer interactions. The equilibrium hard model correctly reproduced the binding constant variations observed in the experiment. The results indicated that ligand binding in two steps is governed by a cooperative process, that is, the enhancement of deprotonated structure stability. It would appear that proposed calculation approach can be used in future combined hard modelling theoretical and soft modelling experimental works. © 2013 Wiley Periodicals, Inc. Biopolymers 99:621–627, 2013.     

Synthesis,characterization, and biological activity of poly(arginine)‐derived cancer‐targeting peptides in HepG2 liver cancer cells

The solid‐phase synthesis, structural characterization, and biological evaluation of a small library of cancer‐targeting peptides have been determined in HepG2 hepatoblastoma cells. These peptides are based on the highly specific Pep42 motif, which has been shown to target the glucose‐regulated protein 78 receptors overexpressed and exclusively localized on the cell surface of tumors. In this study, Pep42 was designed to contain varying lengths (3–12) of poly(arginine) sequences to assess their influence on peptide structure and biology. Peptides were effectively synthesized by 9‐fluorenylmethoxycarbonyl‐based solid‐phase peptide synthesis, in which the use of a poly(ethylene glycol) resin provided good yields (14–46%) and crude purities >95% as analyzed by liquid chromatography–mass spectrometry. Peptide structure and biophysical properties were investigated using circular dichroism spectroscopy. Interestingly, peptides displayed secondary structures that were contingent on solvent and length of the poly(arginine) sequences. Peptides exhibited helical and turn conformations, while retaining significant thermal stability. Structure–activity relationship studies conducted by flow cytometry and confocal microscopy revealed that the poly(arginine) derived Pep42 sequences maintained glucose‐regulated protein 78 binding on HepG2 cells while exhibiting cell translocation activity that was contingent on the length of the poly(arginine) strand. In single dose (0.15 mM) and dose‐response (0–1.5 mM) cell viability assays, peptides were found to be nontoxic in human HepG2 liver cancer cells, illustrating their potential as safe cancer‐targeting delivery agents. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

Impact of UV‐Visible Light on the Morphological and Photochemical Behavior of a Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells

This paper reports on the photochemical behavior upon exposure to UV‐visible light of a poly(2,7‐carbazole) derivative for use in high‐performance solar cells. Poly[N‐9′‐hepta‐decanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT) is one of a relatively large class of push‐pull carbazole‐based copolymers that have been synthesized to better harvest the solar spectrum. The 2,7‐carbazole building block of PCDTBT is also used with different electron‐accepting units in a large variety of low‐band‐gap polymers. The photochemical and morphological behavior of PCDTBT thin films is investigated from the molecular scale to the nanomechanical properties. The photo‐oxidation mechanism is shown to be governed by chain‐scission and cross‐linking reactions. It results in dramatic evolution of the morphology, roughness and stiffness of thin PCDTBT films. Based on the identification of several photoproducts formed along the macromolecular chains or released into the gas phase, the main pathways of PCDTBT photochemical evolution are discussed. These processes first involve the scission of the C–N bond between the carbazole group and the tertiary carbon atom bearing the alkyl side‐chain. Modifications of the chemical structure of PCDTBT, the evolution of its UV‐visible absorbance, and its nanomechanical properties initiated by light irradiation are shown to be closely related.     

Geometrical constraints limiting the poly(ADP‐ribose) conformation investigated by molecular dynamics simulation

Poly(ADP‐ribosylation) is a post‐transductional modification that regulates protein's function. Most of the proteins subjected to this control mechanism belong to machineries involved in DNA damage repair, or DNA interacting proteins. Poly(ADP‐ribose) polymers are long chains of even 100 monomer length that can be branched at several positions but, not withstanding its importance, nothing is known concerning its structure. To understand, which are the geometrical parameters that confer to the polymer the structural constraints that determine its interaction with the target proteins, we have performed molecular dynamics of three chains of different length, made by 5, 25, and 30 units, the last one being branched. Analysis of the simulations allowed us to identify the main intra‐ and inter‐monomer dihedral angles that govern the structure of the polymer that however, does not reach a unique definite conformation. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 78–86, 2014.     

Conformation of poly(γ‐glutamic acid) in aqueous solution

Local conformation and overall conformation of poly(γ‐DL‐glutamic acid) (PγDLGA) and poly(γ‐L‐glutamic acid) (PγLGA) in aqueous solution was studied as a function of degree of ionization ε by ¹H‐NMR, circular dichroism, and potentiometric titration. It was clarified that their local conformation is represented by random coil over an entire ε range and their overall conformation is represented by expanded random‐coil in a range of ε > ε^*, where ε^* is about 0.3, 0.35, 0.45, and 0.5 for added‐salt concentration of 0.02M, 0.05M, 0.1M, and 0.2M, respectively. In a range of ε < ε^*, however, ε dependence of their overall conformation is significantly differentiated from each other. PγDLGA tends to aggregate intramolecularly and/or intermolecularly with decreasing ε, but PγLGA still behaves as expanded random‐coil. It is speculated that spatial arrangement of adjacent carboxyl groups along the backbone chain essentially affects the overall conformation of PγGA in acidic media. © 2015 Wiley Periodicals, Inc. Biopolymers 105: 191–198, 2016.