Reversible unfolding of FtsZ cell division proteins from archaea and bacteria. Comparison with eukaryotic tubulin folding and assembly

The stability, refolding, and assembly properties of FtsZ cell division proteins from Methanococcus jannaschii and Escherichia coli have been investigated. Their guanidinium chloride unfolding has been studied by circular dichroism spectroscopy. FtsZ from E. coli and tubulin released the bound guanine nucleotide, coinciding with an initial unfolding stage at low denaturant concentrations, followed by unfolding of the apoprotein. FtsZ from M. jannaschii released its nucleotide without any detectable secondary structural change. It unfolded in an apparently two-state transition at larger denaturant concentrations. Isolated FtsZ polypeptide chains were capable of spontaneous refolding and GTP-dependent assembly. The homologous eukaryotic tubulin monomers misfold in solution, but fold within the cytosolic chaperonin CCT. Analysis of the extensive tubulin loop insertions in the FtsZ/tubulin common core and of the intermolecular contacts in model microtubules and tubulin-CCT complexes shows a loop insertion present at every element of lateral protofilament contact and at every contact of tubulin with CCT (except at loop T7). The polymers formed by purified FtsZ have a distinct limited protofilament association in comparison with microtubules. We propose that the loop insertions of tubulin and its CCT-assisted folding coevolved with the lateral association interfaces responsible for extended two-dimensional polymerization into microtubule polymers.     

Analysis of the interaction between the eukaryotic chaperonin CCT and its substrates actin and tubulin

Two mechanisms have thus far been characterized for the assistance by chaperonins of the folding of other proteins. The first and best described is that of the prokaryotic chaperonin GroEL, which interacts with a large spectrum of proteins. GroEL uses a nonspecific mechanism by which any conformation of practically any unfolded polypeptide interacts with it through exposed, hydrophobic residues. ATP binding liberates the substrate in the GroEL cavity where it is given a chance to fold. A second mechanism has been described for the eukaryotic chaperonin CCT, which interacts mainly with the cytoskeletal proteins actin and tubulin. Cryoelectron microscopy and biochemical studies have revealed that both of these proteins interact with CCT in quasi-native, defined conformations. Here we have performed a detailed study of the docking of the actin and tubulin molecules extracted from their corresponding CCT:substrate complexes obtained from cryoelectron microscopy and image processing to localize certain regions in actin and tubulin that are involved in the interaction with CCT. These regions of actin and tubulin, which are not present in their prokaryotic counterparts FtsA and FtsZ, are involved in the polymerization of the two cytoskeletal proteins. These findings suggest coevolution of CCT with actin and tubulin in order to counteract the folding problems associated with the generation in these two cytoskeletal protein families of new domains involved in their polymerization.     

Bacterial tubulin distinct loop sequences and primitive assembly properties support its origin from a eukaryotic tubulin ancestor

The structure of the unique bacterial tubulin BtubA/B from Prosthecobacter is very similar to eukaryotic αβ-tubulin but, strikingly, BtubA/B fold without eukaryotic chaperones. Our sequence comparisons indicate that BtubA and BtubB do not really correspond to either α- or β-tubulin but have mosaic sequences with intertwining features from both. Their nucleotide-binding loops are more conserved, and their more divergent sequences correspond to discrete surface zones of tubulin involved in microtubule assembly and binding to eukaryotic cytosolic chaperonin, which is absent from the Prosthecobacter dejongeii draft genome. BtubA/B cooperatively assembles over a wider range of conditions than αβ-tubulin, forming pairs of protofilaments that coalesce into bundles instead of microtubules, and it lacks the ability to differentially interact with divalent cations and bind typical tubulin drugs. Assembled BtubA/B contain close to one bound GTP and GDP. Both BtubA and BtubB subunits hydrolyze GTP, leading to disassembly. The mutant BtubA/B-S144G in the tubulin signature motif GGG(T/S)G(S/T)G has strongly inhibited GTPase, but BtubA-T147G/B does not, suggesting that BtubB is a more active GTPase, like β-tubulin. BtubA/B chimera bearing the β-tubulin loops M, H1-S2, and S9-S10 in BtubB fold, assemble, and have reduced GTPase activity. However, introduction of the α-tubulin loop S9-S10 with its unique eight-residue insertion impaired folding. From the sequence analyses, its primitive assembly features, and the properties of the chimeras, we propose that BtubA/B were acquired shortly after duplication of a spontaneously folding α- and β-tubulin ancestor, possibly by horizontal gene transfer from a primitive eukaryotic cell, followed by divergent evolution.     

Interactions between the actin filament capping and severing protein gelsolin and the molecular chaperone CCT: evidence for nonclassical substrate interactions

CCT is a member of the chaperonin family of molecular chaperones and consists of eight distinct subunit species which occupy fixed positions within the chaperonin rings. The activity of CCT is closely linked to the integrity of the cytoskeleton as newly synthesized actin and tubulin monomers are dependent upon CCT to reach their native conformations. Furthermore, an additional role for CCT involving interactions with assembling/assembled microfilaments and microtubules is emerging. CCT is also known to interact with other proteins, only some of which will be genuine folding substrates. Here, we identify the actin filament remodeling protein gelsolin as a CCT-binding partner, and although it does not behave as a classical folding substrate, gelsolin binds to CCT with a degree of specificity. In cultured cells, the levels of CCT monomers affect levels of gelsolin, suggesting an additional link between CCT and the actin cytoskeleton that is mediated via the actin filament severing and capping protein gelsolin.     

Evidence that beta-tubulin induces a conformation change in the cytosolic chaperonin which stabilizes binding: implications for the mechanism of action

The class II chaperonin CCT facilitates protein folding by a process that is not well-understood. One striking feature of this chaperonin is its apparent selectivity in vivo, folding only actin, tubulin, and several other proteins. In contrast, the class I chaperonin GroEL is thought to facilitate the folding of many proteins within Escherichia coli. It has been proposed that this apparent selectivity is associated with certain regions of a substrate protein's primary structure. Using limiting amounts of beta-tubulin, beta-tubulin mutants, and beta-tubulin/ftsZ chimeras, we assessed the contribution of select regions of beta-tubulin to CCT binding. In a complementary study, we investigated inter-ring communication in CCT where we exploited polypeptide binding sensitivity to nucleotide to quantitate nucleotide binding. beta-Tubulin bound with a high apparent affinity to CCT in the absence of nucleotide (apparent K(D) approximately 3 nM; its apparent binding free energy, DeltaG, ca. -11.8 kcal/mol). Despite this, the interactions appear to be weak and distributed throughout much of the sequence, although certain sites ("hot spots") may interact somewhat more strongly with CCT. Globally averaged over the beta-tubulin sequence, these interactions appear to contribute ca. -9 to -11 cal/mol per residue, and to account for no more than 50-60% of the total binding free energy. We propose that a conformation change or deformation induced in CCT by substrate binding provides the missing free energy which stabilizes the binary complex. We suggest that by coupling CCT deformation with polypeptide binding, CCT avoids the need for high "intrinsic" affinities for its substrates. This strategy allows for dynamic interactions between chaperonin and bound substrate, which may facilitate folding on the interior surface of CCT in the absence of nucleotide and/or productive release of bound polypeptide into the central cavity upon subsequent MgATP binding. CCT displayed negative inter-ring cooperativity like GroEL. When ring 1 of CCT bound MgATP or beta-tubulin, the affinity of ring 2 for polypeptide or nucleotide was apparently reduced approximately 100-fold.     

Defining the eukaryotic cytosolic chaperonin-binding sites in human tubulins

The actins and tubulins are the obligate substrates in vivo of the chaperonin-containing TCP-1 (CCT). The precise elements of recognition between the chaperonin and its substrates remain largely unknown. We have used a solid phase peptide binding assay to screen the human alpha, beta and gamma-tubulin sequences for CCT recognition. Multiple regions seem to be implicated in interactions between tubulins and CCT. These potential CCT-binding sites are highly dispersed throughout the primary sequences of the human tubulins. In addition, using site-directed mutagenesis we assessed the contribution of the selected residues in the C-terminal domain of beta-tubulin to CCT binding. Various hot spots have been identified even though, in each case, their replacement by alanine does not reduce dramatically the total affinity of beta-tubulin for CCT. The CCT-binding information in the tubulins is probably confined to multiple specific regions each having weak or moderate affinity for CCT apical domains. The main binding region seems to be located between residues 263 and 384, but there are no single amino acid residues in this region, which make large contributions to the binding energy, although we have detected a minor contribution by F377. These biochemical results are understandable in the context of our recent structural analysis of CCT-tubulin complexes by cryo-electron microscopy and image reconstruction, which shows that, in one stage of an in vitro binding reaction between apo-CCT and tubulin diluted from guanidinium chloride, ten major, stable contacts between tubulin and CCT are involved. Therefore, specificity is achieved through the co-operation of many specific, albeit weak, interactions.     

Human S100B protein interacts with the Escherichia coli division protein FtsZ in a calcium-sensitive manner

S100B is a small, dimeric EF-hand calcium-binding protein abundant in vertebrates. Upon calcium binding, S100B undergoes a conformational change allowing it to interact with a variety of target proteins, including the cytoskeletal proteins tubulin and glial fibrillary acidic protein. In both cases, S100B promotes the in vitro disassembly of these proteins in a calcium-sensitive manner. Despite this, there is little in vivo evidence for the interaction of proteins such as tubulin with S100B. To probe these interactions, we studied the expression of human S100B in Escherichia coli and its interaction with the prokaryotic ancestor of tubulin, FtsZ, the major protein involved in bacterial division. Expression of S100B protein in E. coli results in little change in FtsZ protein levels, causes a filamenting bacterial phenotype characteristic of FtsZ inhibition, and leads to missed rounds of cell division. Further, S100B localizes to positions similar to those of FtsZ in bacterial filaments: the small foci at the poles, the mid-cell positions, and between the nucleoids at regular intervals. Calcium-dependent physical interaction between S100B and FtsZ was demonstrated in vitro by affinity chromatography, and this interaction was severely inhibited by the competitor peptide TRTK-12. Together these results indicate that S100B interacts with the tubulin homologue FtsZ in vivo, modulating its activity in bacterial cell division. This approach will present an important step for the study of S100 protein interactions in vivo.     

Molecular dynamics modeling of tubulin C-terminal tail interactions with the microtubule surface

Tubulin, an α/β heterodimer, has had most of its 3D structure analyzed; however, the carboxy (C)-termini remain elusive. Importantly, the C-termini play critical roles in regulating microtubule structure and function. They are sites of most of the post-translational modifications of tubulin and interaction sites with molecular motors and microtubule-associated proteins. Simulated annealing was used in our molecular dynamics modeling to predict the interactions of the C-terminal tails with the tubulin dimer. We examined differences in their flexibility, interactions with the body of tubulin, and the existence of structural motifs. We found that the α-tubulin tail interacts with the H11 helix of β-tubulin, and the β-tubulin tail interacts with the H11 helix of α-tubulin. Tail domains and H10/B9 loops interact with each other and compete for interactions with positively-charged residues of the H11 helix on the neighboring monomer. In a simulation in which α-tubulin's H10/B9 loop switches on sub-nanosecond intervals between interactions with the C-terminal tail of α-tubulin and the H11 helix of β-tubulin, the intermediate domain of α-tubulin showed more fluctuations compared to those in the other simulations, indicating that tail domains may cause shifts in the position of this domain. This suggests that C-termini may affect the conformation of the tubulin dimer which may explain their essential function in microtubule formation and effects on ligand binding to microtubules. Our modeling also provides evidence for a disordered-helical/helical double-state system of the T3/H3 region of the microtubule, which could be linked to depolymerization following GTP hydrolysis.     

Stathmin and its phosphoprotein family: general properties, biochemical and functional interaction with tubulin

Stathmin, also referred to as Op18, is a ubiquitous cytosolic phosphoprotein, proposed to be a small regulatory protein and a relay integrating diverse intracellular signaling pathways involved in the control of cell proliferation, differentiation and activities. It interacts with several putative downstream target and/or partner proteins. One major action of stathmin is to interfere with microtubule dynamics, by inhibiting the formation of microtubules and/or favoring their depolymerization. Stathmin (S) interacts directly with soluble tubulin (T), which results in the formation of a T2S complex which sequesters free tubulin and therefore impedes microtubule formation. However, it has been also proposed that stathmin's action on microtubules might result from the direct promotion of catastrophes, which is still controversial. Phosphorylation of stathmin regulates its biological actions: it reduces its affinity for tubulin and hence its action on microtubule dynamics, which allows for example progression of cells through mitosis. Stathmin is also the generic element of a protein family including the neural proteins SCG10, SCLIP and RB3/RB3'/RB3". Interestingly, the stathmin-like domains of these proteins also possess a tubulin binding activity in vitro. In vivo, the transient expression of neural phosphoproteins of the stathmin family leads to their localization at Golgi membranes and, as previously described for stathmin and SCG10, to the depolymerization of interphasic microtubules. Altogether, the same mechanism for microtubule destabilization, that implies tubulin sequestration, is a common feature likely involved in the specific biological roles of each member of the stathmin family.     

The nucleotide switch of tubulin and microtubule assembly: a polymerization-driven structural change

GTP-binding proteins from the tubulin family, including alphabeta-tubulin, gamma-tubulin, bacterial tubulin, and FtsZ, are key components of the cytoskeleton and play central roles in chromosome segregation and cell division. The nucleotide switch of alphabeta-tubulin is triggered by GTP hydrolysis and regulates microtubule assembly dynamics. The structural mechanism of the switch and how it modulates assembly are beginning to be understood. A conserved structural change between the active and inactive states, different from other GTPases, may be extracted from recent tubulin and FtsZ structures. From these and the biochemical properties of tubulin, the new concept emerges that, contrary to what was thought, unassembled tubulin-GTP is in the inactive, curved conformation as in tubulin-GDP rings, and it is driven into the straight microtubule conformation by the assembly contacts; binding of the GTP gamma-phosphate only lowers the free energy difference between the curved and straight forms.     

GTPase activity of mycobacterial FtsZ is impaired due to its transphosphorylation by the eukaryotic-type Ser/Thr kinase, PknA

FtsZ, a homolog of eukaryotic tubulin, is involved in the process of cell division, particularly in septum formation in bacteria. The primary amino acid sequences of this protein are fairly conserved in prokaryotes. We observed that a eukaryotic-type Ser/Thr protein kinase, PknA from Mycobacterium tuberculosis, when expressed in Escherichia coli exhibited cell elongation due to a defect in septum formation. We found that FtsZ either from Escherichia coli (eFtsZ) or from M. tuberculosis (mFtsZ) was phosphorylated on co-expression with PknA. Consistent with these observations, solid phase binding and in vitro kinase assays revealed the ability of PknA to interact with mFtsZ protein and also to phosphorylate it. We, therefore, ascertained mFtsZ as a substrate of PknA. Furthermore, the phosphorylated mFtsZ exhibited impairment in its GTP hydrolysis and polymerization abilities. Thus, our results highlighted the ability of PknA to phosphorylate as well as to regulate the functionality of FtsZ, the protein central to cell division throughout the bacterial lineage.     

Crystal structure of the cell division protein FtsA from Thermotoga maritima

Bacterial cell division requires formation of a septal ring. A key step in septum formation is polymerization of FtsZ. FtsA directly interacts with FtsZ and probably targets other proteins to the septum. We have solved the crystal structure of FtsA from Thermotoga maritima in the apo and ATP-bound form. FtsA consists of two domains with the nucleotide-binding site in the interdomain cleft. Both domains have a common core that is also found in the actin family of proteins. Structurally, FtsA is most homologous to actin and heat-shock cognate protein (Hsc70). An important difference between FtsA and the actin family of proteins is the insertion of a subdomain in FtsA. Movement of this subdomain partially encloses a groove, which could bind the C-terminus of FtsZ. FtsZ is the bacterial homologue of tubulin, and the FtsZ ring is functionally similar to the contractile ring in dividing eukaryotic cells. Elucidation of the crystal structure of FtsA shows that another bacterial protein involved in cytokinesis is structurally related to a eukaryotic cytoskeletal protein involved in cytokinesis.     

Interactions of Bovine Brain Tubulin with Pyridostigmine Bromide and N,N′-Diethyl-m-Toluamide

Pyridostigmine bromide (PB), an inhibitor of acetylcholinesterase, has been used as a prophylactic for nerve gas poisoning. N,N-diethyl-m-toluamide (DEET) is the active ingredient in most insect repellents and is thought to interact synergistically with PB. Since PB can inhibit the binding of organophosphates to tubulin and since organophosphates inhibit microtubule assembly, we decided to examine the effects of PB and DEET on microtubule assembly as well as their interactions with tubulin, the subunit protein of microtubules. We found that PB binds to tubulin with an apparent K _d of about 60 M. PB also inhibits microtubule assembly in vitro, although at higher concentrations PB induces formation of tubulin aggregates of high absorbance. Like PB, DEET is a weak inhibitor of microtubule assembly and also induces formation of tubulin aggregates. Many tubulin ligands stabilize the conformation of tubulin as measured by exposure of sulfhydryl groups and hydrophobic areas and stabilization of colchicine binding. PB appears to have very little effect on tubulin conformation, and DEET appears to have no effect. Neither compound interferes with colchicine binding to tubulin. Our results raise the possibility that PB and DEET may exert some of their effects in vivo by interfering with microtubule assembly or function, although high intracellular levels of these compounds would be required.     

Structural Change in FtsZ Induced by Intermolecular Interactions between Bound GTP and the T7 Loop

FtsZ is a prokaryotic homolog of tubulin and is a key molecule in bacterial cell division. FtsZ with bound GTP polymerizes into tubulin-like protofilaments. Upon polymerization, the T7 loop of one subunit is inserted into the nucleotide-binding pocket of the second subunit, which results in GTP hydrolysis. Thus, the T7 loop is important for both polymerization and hydrolysis in the tubulin/FtsZ family. Although x-ray crystallography revealed both straight and curved conformations of tubulin, only a curved structure was known for FtsZ. Recently, however, FtsZ from Staphylococcus aureus has been shown to have a very different conformation from the canonical FtsZ structure. The present study was performed to investigate the structure of FtsZ from Staphylococcus aureus by mutagenesis experiments; the effects of amino acid changes in the T7 loop on the structure as well as on GTPase activity were studied. These analyses indicated that FtsZ changes its conformation suitable for polymerization and GTP hydrolysis by movement between N- and C-subdomains via intermolecular interactions between bound nucleotide and residues in the T7 loop.     

Chemically synthesized 182-235 segment of tau protein and analogue peptides are efficient in vitro microtubule assembly inducers of low apparent sequence specificity.

A 54-amino acid peptide reproducing the first and second repeats and intervening spacer sequence of the tubulin binding motif (residues 182-235) of murine tau protein, and several congeners representing different degrees of sequence scrambling have been prepared by solid phase methods and fully characterized chemically. These double-repeat peptides have been shown to induce microtubule formation at concentrations about one order of magnitude lower than single-repeat controls, under conditions close to the critical concentration needed for tubulin self-assembly. On the other hand, partial loss of microtubule-inducing capacity was observed for peptides with primary structures increasingly disorganized with respect to the canonical peptide. These results call into question the assumption that a high degree of primary structure specificity is involved in the tau-tubulin interaction leading to in vitro microtubule formation.     

The straight and curved conformation of FtsZ protofilaments-evidence for rapid exchange of GTP into the curved protofilament

Bacterial cell division protein FtsZ assembles into protofilaments, which can adopt a straight or curved conformation, similar to its eukaryotic homolog, tubulin. The straight protofilaments can assemble into sheets with a lattice similar to the microtubule wall. The curved protofilaments can form rings when adsorbed to a lipid monolayer, but in solution they form helices. 4 helices assemble together to make a tube, the characteristic polymer of the curved protofilament. GTP favors the straight conformation, while GDP favors the curved. We show here that addition of EDTA and GTP to tubes causes a rapid transformation to straight protofilament sheets. Apparently when the magnesium is chelated the GDP in the curved protofilaments dissociates rapidly and is replaced with GTP, and this GTP induces the transition to straight protofilaments.     

The FtsZ-Like Protein FtsZm of Magnetospirillum gryphiswaldense Likely Interacts with Its Generic Homolog and Is Required for Biomineralization under Nitrate Deprivation

Midcell selection, septum formation, and cytokinesis in most bacteria are orchestrated by the eukaryotic tubulin homolog FtsZ. The alphaproteobacterium Magnetospirillum gryphiswaldense (MSR-1) septates asymmetrically, and cytokinesis is linked to splitting and segregation of an intracellular chain of membrane-enveloped magnetite crystals (magnetosomes). In addition to a generic, full-length ftsZ gene, MSR-1 contains a truncated ftsZ homolog (ftsZm) which is located adjacent to genes controlling biomineralization and magnetosome chain formation. We analyzed the role of FtsZm in cell division and biomineralization together with the full-length MSR-1 FtsZ protein. Our results indicate that loss of FtsZm has a strong effect on microoxic magnetite biomineralization which, however, could be rescued by the presence of nitrate in the medium. Fluorescence microscopy revealed that FtsZm-mCherry does not colocalize with the magnetosome-related proteins MamC and MamK but is confined to asymmetric spots at midcell and at the cell pole, coinciding with the FtsZ protein position. In Escherichia coli, both FtsZ homologs form distinct structures but colocalize when coexpressed, suggesting an FtsZ-dependent recruitment of FtsZm. In vitro analyses indicate that FtsZm is able to interact with the FtsZ protein. Together, our data suggest that FtsZm shares key features with its full-length homolog but is involved in redox control for magnetite crystallization.     

Conformational properties of microtubule protein: Their relation to the self-assembly process in vitro

Near- and far-uv CD spectra of microtubule protein preparations have been examined to study the possible role of protein conformation in relation to the kinetics of the self-assembly of these proteins into microtubules in vitro. Although tubulin can form conformations with high helical content under apolar solution conditions, this transformation is apparently not involved in self-assembly. There is no major perturbation of tubulin near-uv CD by reagents and solution conditions favoring assembly. Thus, in these preparations, tubulin, as dimer and as oligomer with MAPs, is effectively in the conformation in which it undergoes self-assembly. This conclusion is consistent with a hybrid model of assembly of microtubule protein involving direct incorporation of oligomeric species as an alternative to the condensation polymerization of tubulin dimer as the exclusive assembly mechanism.     

Structure of eukaryotic prefoldin and of its complexes with unfolded actin and the cytosolic chaperonin CCT

The biogenesis of the cytoskeletal proteins actin and tubulin involves interaction of nascent chains of each of the two proteins with the oligomeric protein prefoldin (PFD) and their subsequent transfer to the cytosolic chaperonin CCT (chaperonin containing TCP-1). Here we show by electron microscopy that eukaryotic PFD, which has a similar structure to its archaeal counterpart, interacts with unfolded actin along the tips of its projecting arms. In its PFD-bound state, actin seems to acquire a conformation similar to that adopted when it is bound to CCT. Three-dimensional reconstruction of the CCT:PFD complex based on cryoelectron microscopy reveals that PFD binds to each of the CCT rings in a unique conformation through two specific CCT subunits that are placed in a 1,4 arrangement. This defines the phasing of the CCT rings and suggests a handoff mechanism for PFD.