Metabolic engineering of Corynebacterium glutamicum for L-serine production

Although L-serine proceeds in just three steps from the glycolytic intermediate 3-phosphoglycerate, and as much as 8% of the carbon assimilated from glucose is directed via L-serine formation, previous attempts to obtain a strain producing L-serine from glucose have not been successful. We functionally identified the genes serC and serB from Corynebacterium glutamicum, coding for phosphoserine aminotransferase and phosphoserine phosphatase, respectively. The overexpression of these genes, together with the third biosynthetic serA gene, serA(delta197), encoding an L-serine-insensitive 3-phosphoglycerate dehydrogenase, yielded only traces of L-serine, as did the overexpression of these genes in a strain with the L-serine dehydratase gene sdaA deleted. However, reduced expression of the serine hydroxymethyltransferase gene glyA, in combination with the overexpression of serA(delta197), serC, and serB, resulted in a transient accumulation of up to 16 mM L-serine in the culture medium. When sdaA was also deleted, the resulting strain, C. glutamicum delta sdaA::pK18mobglyA'(pEC-T18mob2serA(delta197)CB), accumulated up to 86 mM L-serine with a maximal specific productivity of 1.2 mmol h(-1) g (dry weight)(-1). This illustrates a high rate of L-serine formation and also utilization in the C. glutamicum wild type. Therefore, metabolic engineering of L-serine production from glucose can be achieved only by addressing the apparent key position of this amino acid in the central metabolism.     

Metabolic engineering of Corynebacterium glutamicum for the production of itaconate

The capability of Corynebacterium glutamicum for glucose-based synthesis of itaconate was explored, which can serve as building block for production of polymers, chemicals, and fuels. C. glutamicum was highly tolerant to itaconate and did not metabolize it. Expression of the Aspergillus terreus CAD1 gene encoding cis-aconitate decarboxylase (CAD) in strain ATCC13032 led to the production of 1.4 mM itaconate in the stationary growth phase. Fusion of CAD with the Escherichia coli maltose-binding protein increased its activity and the itaconate titer more than two-fold. Nitrogen-limited growth conditions boosted CAD activity and itaconate titer about 10-fold to values of 1440 mU mg⁻¹ and 30 mM. Reduction of isocitrate dehydrogenase activity via exchange of the ATG start codon to GTG or TTG resulted in maximal itaconate titers of 60 mM (7.8 g l⁻¹), a molar yield of 0.4 mol mol⁻¹, and a volumetric productivity of 2.1 mmol l⁻¹ h⁻¹.     

Metabolic engineering of Corynebacterium glutamicum for production of sunscreen shinorine

Ultraviolet-absorbing chemicals are useful in cosmetics and skin care to prevent UV-induced skin damage. We demonstrate here that heterologous production of shinorine, which shows broad absorption maxima in the UV-A and UV-B region. A shinorine producing Corynebacterium glutamicum strain was constructed by expressing four genes from Actinosynnema mirum DSM 43827, which are responsible for the biosynthesis of shinorine from sedoheptulose-7-phosphate in the pentose phosphate pathway. Deletion of transaldolase encoding gene improved shinorine production by 5.2-fold. Among the other genes in pentose phosphate pathway, overexpression of 6-phosphogluconate dehydrogenase encoding gene further increased shinorine production by 60% (19.1 mg/L). The genetic engineering of the pentose phosphate pathway in C. glutamicum improved shinorine production by 8.3-fold in total, and could be applied to produce the other chemicals derived from sedoheptulose-7-phosphate.     

Metabolic engineering of Corynebacterium glutamicum for cadaverine fermentation

Cadaverine, the expected raw material of polyamides, is produced by decarboxylation of L-lysine. If we could produce cadaverine from the cheapest sugar, and as a renewable resource, it would be an effective solution against global warming, but there has been no attempt to produce cadaverine from glucose by fermentation. We focused on Corynebacterium glutamicum, whose L-lysine fermentation ability is superior, and constructed a metabolically engineered C. glutamicum in which the L-homoserine dehydrogenase gene (hom) was replaced by the L-lysine decarboxylase gene (cadA) of Escherichia coli. In this recombinant strain, cadaverine was produced at a concentration of 2.6 g/l, equivalent to up to 9.1% (molecular yield) of the glucose transformed into cadaverine in neutralizing cultivation. This is the first report of cadaverine fermentation by C. glutamicum.     

Metabolic engineering of Corynebacterium glutamicum for production of 1,5-diaminopentane from hemicellulose

In the present work, the bio-based production of 1,5-diaminopentane (cadaverine), an important building block for bio-polyamides, was extended to hemicellulose a non-food raw material. For this purpose, the metabolism of 1,5-diaminopentane-producing Corynebacterium glutamicum was engineered to the use of the C(5) sugar xylose. This was realized by heterologous expression of the xylA and xylB genes from Escherichia coli, mediating the conversion of xylose into xylulose 5-phosphate (an intermediate of the pentose phosphate pathway), in a defined diaminopentane-producing C. glutamicum strain, recently obtained by systems metabolic engineering. The created mutant, C. glutamicum DAP-Xyl1, exhibited efficient production of the diamine from xylose and from mixtures of xylose and glucose. Subsequently, the novel strain was tested on industrially relevant hemicellulose fractions, mainly containing xylose and glucose as carbon source. A two-step process was developed, comprising (i) enzymatic hydrolysis of hemicellulose from dried oat spelts, and (ii) biotechnological 1,5-diaminopentane production from the obtained hydrolysates with the novel C. glutamicum strain. This now opens a future avenue towards bio-based 1,5-diaminopentane and bio-polyamides thereof from non-food raw materials.     

Metabolic engineering of Corynebacterium glutamicum for fuel ethanol production under oxygen-deprivation conditions

The central metabolic pathway of Corynebacterium glutamicum was engineered to produce ethanol. A recombinant strain which expressed the Zymomonas mobilis genes coding for pyruvate decarboxylase (pdc) and alcohol dehydrogenase (adhB) was constructed. Both genes placed under the control of the C. glutamicum ldhA promoter were expressed at high levels in C. glutamicum, resulting, under oxygen-deprivation conditions, in a significant yield ofethanol from glucose in a process characterized by the absence of cellular growth. Addition of pyruvate in trace amounts to the reaction mixture induced a 2-fold increase in the ethanol production rate. A similar effect was observed when acetaldehyde was added. Disruption of the lactate dehydrogenase (ldhA) gene led to a 3-fold higher ethanol yield than wild type, with no lactate production. Moreover, inactivation of the phosphoenolpyruvate carboxylase (ppc) and ldhA genes revealed a significant amount of ethanol production and a dramatic decrease in succinate without any lactate production, when pyruvate was added. Since the reaction occurred in the absence of cell growth, the ethanol volumetric productivity increased in proportion to cell density of ethanologenic C. glutamicum in a process under oxygen-deprivation conditions. These observations corroborate the view that intracellular NADH concentrations in C. glutamicum are correlated to oxygen-deprived metabolic flows.     

代谢工程改造谷氨酸棒状杆菌合成及分泌途径生产L-缬氨酸

谷氨酸棒状杆菌是目前微生物发酵生产L-缬氨酸的主要工业菌株。文中首先在谷氨酸棒状杆菌VWB-1中敲除了alaT (丙氨酸氨基转移酶),获得突变菌株VWB-2,作为出发菌株。进而对L-缬氨酸合成途径关键酶——乙酰羟酸合酶 (ilvBN) 的调节亚基进行定点突变 (ilvBN1M13),解除L-缬氨酸对该酶的反馈抑制。然后辅助过量表达L-缬氨酸合成途径关键基因ilvBN1M13、乙酰羟酸异构酶 (ilvC)、二羟酸脱水酶 (ilvD)、支链氨基酸氨基转移酶 (ilvE),加强通往L-缬氨酸的碳代谢流,提高菌株的L-缬氨酸水平。最后,基于过量表达L-缬氨酸转运蛋白编码基因brnFE及其调控蛋白编码基因lrp1,提高细胞的L-缬氨酸转运能力。最终获得工程菌株VWB-2/pEC-XK99E-ilvBN1M13CE-lrp1-brnFE在5 L发酵罐中的L-缬氨酸产量达到461.4 mmol/L,糖酸转化率达到0.312 g/g葡萄糖。     

Metabolic analysis of glutamate production by Corynebacterium glutamicum

The dynamic behavior of the metabolism of Corynebacterium glutamicum during L-glutamic acid fermentation, was evaluated by quantitative analysis of the evolution of intracellular metabolites and key enzyme concentrations. Glutamate production was induced by an increase of the temperature and a final concentration of 80 g/l was attained. During the production phase, various other compounds, notably lactate, trehalose, and DHA were secreted to the medium. Intracellular metabolites analysis showed important variations of glycolytic intermediates and NADH, NAD coenzymes levels throughout the production phase. Two phenomena occur during the production phase which potentially provoke a decrease in the glutamate yield: Both the intracellular concentrations of glycolytic intermediates and the NADH/NAD ratio increase significantly during the period in which the overall metabolic rates decline. This correlates with the decrease in glutamate yield due in part to the production of lactate and also to the period of the fermentation in which growth no longer occurred.     

Metabolic engineering of Corynebacterium glutamicum for increasing the production of l-ornithine by increasing NADPH availability

The experiments presented here were based on the conclusions of our previous proteomic analysis. Increasing the availability of glutamate by overexpression of the genes encoding enzymes in the l-ornithine biosynthesis pathway upstream of glutamate and disruption of speE, which encodes spermidine synthase, improved l-ornithine production by Corynebacterium glutamicum. Production of l-ornithine requires 2 moles of NADPH per mole of l-ornithine. Thus, the effect of NADPH availability on l-ornithine production was also investigated. Expression of Clostridium acetobutylicum gapC, which encodes NADP-dependent glyceraldehyde-3-phosphate dehydrogenase, and Bacillus subtilis rocG, which encodes NAD-dependent glutamate dehydrogenase, led to an increase of l-ornithine concentration caused by greater availability of NADPH. Quantitative real-time PCR analysis demonstrates that the increased levels of NADPH resulted from the expression of the gapC or rocG gene rather than that of genes (gnd, icd, and ppnK) involved in NADPH biosynthesis. The resulting strain, C. glutamicum ΔAPRE::rocG, produced 14.84 g l^?1 of l-ornithine. This strategy of overexpression of gapC and rocG will be useful for improving production of target compounds using NADPH as reducing equivalent within their synthetic pathways.     

Metabolic engineering of Corynebacterium glutamicum for the de novo production of ethylene glycol from glucose

Development of sustainable biological process for the production of bulk chemicals from renewable feedstock is an important goal of white biotechnology. Ethylene glycol (EG) is a large-volume commodity chemical with an annual production of over 20 million tons, and it is currently produced exclusively by petrochemical route. Herein, we report a novel biosynthetic route to produce EG from glucose by the extension of serine synthesis pathway of Corynebacterium glutamicum. The EG synthesis is achieved by the reduction of glycoaldehyde derived from serine. The transformation of serine to glycoaldehyde is catalyzed either by the sequential enzymatic deamination and decarboxylation or by the enzymatic decarboxylation and oxidation. We screened the corresponding enzymes and optimized the production strain by combinatorial optimization and metabolic engineering. The best engineered C. glutamicum strain is able to accumulate 3.5 g/L of EG with the yield of 0.25 mol/mol glucose in batch cultivation. This study lays the basis for developing an efficient biological process for EG production.     

Metabolic engineering of l-leucine production in Escherichia coli and Corynebacterium glutamicum: a review

l-Leucine, as an essential branched-chain amino acid for humans and animals, has recently been attracting much attention because of its potential for a fast-growing market demand. The applicability ranges from flavor enhancers, animal feed additives and ingredients in cosmetic to specialty nutrients in pharmaceutical and medical fields. Microbial fermentation is the major method for producing l-leucine by using Escherichia coli and Corynebacterium glutamicum as host bacteria. This review gives an overview of the metabolic pathway of l-leucine (i.e. production, import and export systems) and highlights the main regulatory mechanisms of operons in E. coli and C. glutamicum l-leucine biosynthesis. We summarize here the current trends in metabolic engineering techniques and strategies for manipulating l-leucine producing strains. Finally, future perspectives to construct industrially advantageous strains are considered with respect to recent advances in biology.     

Metabolic engineering of glucose uptake systems in Corynebacterium glutamicum for improving the efficiency of l-lysine production

Journal of Industrial Microbiology & Biotechnology - Traditional amino acid producers typically exhibit the low glucose uptake rate and growth deficiency, resulting in a long fermentation time...     

Metabolic engineering of Corynebacterium glutamicum for production of scyllo-inositol,a drug candidate against Alzheimer's disease

Scyllo-inositol has been identified as a potential drug for the treatment of Alzheimer's disease. Therefore, cost-efficient processes for the production of this compound are desirable. In this study, we analyzed and engineered Corynebacterium glutamicum with the aim to develop competitive scyllo-inositol producer strains. Initial studies revealed that C. glutamicum naturally produces scyllo-inositol when cultured with myo-inositol as carbon source. The conversion involves NAD⁺-dependent oxidation of myo-inositol to 2-keto-myo-inositol followed by NADPH-dependent reduction to scyllo-inositol. Use of myo-inositol for biomass formation was prevented by deletion of a cluster of 16 genes involved in myo-inositol catabolism (strain MB001(DE3)Δiol1). Deletion of a second cluster of four genes (oxiC-cg3390-oxiD-oxiE) related to inositol metabolism prevented conversion of 2-keto-myo-inositol to undesired products causing brown coloration (strain MB001(DE3)Δiol1Δiol2). The two chassis strains were used for plasmid-based overproduction of myo-inositol dehydrogenase (IolG) and scyllo-inositol dehydrogenase (IolW). In BHI medium containing glucose and myo-inositol, a complete conversion of the consumed myo-inositol into scyllo-inositol was achieved with the Δiol1Δiol2 strain. To enable scyllo-inositol production from cheap carbon sources, myo-inositol 1-phosphate synthase (Ino1) and myo-inositol 1-phosphatase (ImpA), which convert glucose 6-phosphate into myo-inositol, were overproduced in addition to IolG and IolW using plasmid pSI. Strain MB001(DE3)Δiol1Δiol2 (pSI) produced 1.8 g/L scyllo-inositol from 20 g/L glucose and even 4.4 g/L scyllo-inositol from 20 g/L sucrose within 72 h. Our results demonstrate that C. glutamicum is an attractive host for the biotechnological production of scyllo-inositol and potentially further myo-inositol-derived products.     

Metabolic engineering of Corynebacterium glutamicum for the production of 3-hydroxypropionic acid from glucose and xylose

3-Hydroxypropionic acid (3-HP) is a promising platform chemical which can be used for the production of various value-added chemicals. In this study,Corynebacterium glutamicum was metabolically engineered to efficiently produce 3-HP from glucose and xylose via the glycerol pathway. A functional 3-HP synthesis pathway was engineered through a combination of genes involved in glycerol synthesis (fusion of gpd and gpp from Saccharomyces cerevisiae) and 3-HP production (pduCDEGH from Klebsiella pneumoniae and aldehyde dehydrogenases from various resources). High 3-HP yield was achieved by screening of active aldehyde dehydrogenases and by minimizing byproduct synthesis (gapA^A1GΔldhAΔpta-ackAΔpoxBΔglpK). Substitution of phosphoenolpyruvate-dependent glucose uptake system (PTS) by inositol permeases (iolT1) and glucokinase (glk) further increased 3-HP production to 38.6 g/L, with the yield of 0.48 g/g glucose. To broaden its substrate spectrum, the engineered strain was modified to incorporate the pentose transport gene araE and xylose catabolic gene xylAB, allowing for the simultaneous utilization of glucose and xylose. Combination of these genetic manipulations resulted in an engineered C. glutamicum strain capable of producing 62.6 g/L 3-HP at a yield of 0.51 g/g glucose in fed-batch fermentation. To the best of our knowledge, this is the highest titer and yield of 3-HP from sugar. This is also the first report for the production of 3-HP from xylose, opening the way toward 3-HP production from abundant lignocellulosic feedstocks.     

谷氨酸棒杆菌生产琥珀酸的代谢工程研究进展

琥珀酸是一种具有重要应用价值的四碳平台化合物。微生物法发酵生产琥珀酸以其社会、环境和经济优势展现出良好的发展前景。谷氨酸棒杆菌被广泛应用于氨基酸、核苷酸等高附加值化学品的工业化生产,在厌氧条件下细胞处于生长停滞状态,但仍能高效利用碳源合成有机酸,通过代谢工程改造的谷氨酸棒杆菌有望成为理想的琥珀酸生产菌株。结合近年来谷氨酸棒杆菌生产琥珀酸取得的最新成果,本文综述了构建高产琥珀酸工程菌株的代谢工程策略、底物的扩展利用,并展望了将来的研究方向。     

Metabolic engineering of Corynebacterium glutamicum ATCC13032 to produce S-adenosyl-l-methionine

As an important biological methyl group donor, S-adenosyl-l-methionine is used as nutritional supplement or drug for various diseases, but bacterial strains that can efficiently produce S-adenosyl-l-methionine are not available. In this study, Corynebacterium glutamicum strain HW104 which can accumulate S-adenosyl-l-methionine was constructed from C. glutamicum ATCC13032 by deleting four genes thrB, metB, mcbR and Ncgl2640, and six genes metK, vgb, lysC^m, hom^m, metX and metY were overexpressed in HW104 in different combinations, forming strains HW104/pJYW-4-metK-vgb, HW104/pJYW-4-SAM2C-vgb, HW104/pJYW-4-metK-vgb-metYX, and HW104/pJYW-4-metK-vgb-metYX-hom^m-lysC^m. Fermentation experiments showed that HW104/pJYW-4-metK-vgb produced more S-adenosyl-l-methionine than other strains, and the yield achieved 196.7 mg/L (12.15 mg/g DCW) after 48 h. The results demonstrate the potential application of C. glutamicum for production of S-adenosyl-l-methionine without addition of l-methionine.