Involvement of heparin chain length in the heparin-catalyzed inhibition of thrombin by antithrombin III

The mechanism of the heparin-promoted reaction of thrombin with antithrombin III was investigated by using covalent complexes of antithrombin III with either high-affinity heparin (Mr = 15,000) or heparin fragments having an average of 16 and 12 monosaccharide units (Mr = 4,300 and 3,200). The complexes inhibit thrombin in the manner of active site-directed, irreversible inhibitors: (Formula: see text) That is, the inhibition rate of the enzyme is saturable with respect to concentration of complexes. The values determined for Ki = (k-1 + k2)/k1 are 7 nM, 100 nM, and 6 microM when the Mr of the heparin moieties are 15,000, 4,300, 3,200, respectively, whereas k2 (2 S-1) is independent of the heparin chain length. The bimolecular rate constant k2/Ki for intact heparin is 3 X 10(8) M-1 S-1 and the corresponding second order rate constant k1 is 6.7 X 10(8) M-1 S-1, a value greater than that expected for a diffusion-controlled bimolecular reaction. The bimolecular rate constants for the complexes with heparin of Mr = 4,300 and 3,200 are, respectively, 2 X 10(7) M-1 S-1 and 3 X 10(5) M-1 S-1. Active site-blocked thrombin is an antagonist of covalent antithrombin III-heparin complexes: the effect is monophasic and half-maximum at 4 nM of antagonist against the complex with intact heparin, whereas the effect is weaker against complexes with heparin fragments and not monophasic. We conclude that virtually all of the activity of high affinity, high molecular weight heparin depends on binding both thrombin and antithrombin III to heparin, and that the exceptionally high activity of heparin results in part from the capacity of thrombin bound nonspecifically to heparin to diffuse in the dimension of the heparin chain towards bound antithrombin III. Increasing the chain length of heparin results in an increased reaction rate because of a higher probability of interaction between thrombin and heparin in solution.     

Role of ternary complexes, in which heparin binds both antithrombin and proteinase, in the acceleration of the reactions between antithrombin and thrombin or factor Xa

Oligosaccharides (10-20 monosaccharide units) with high affinity for antithrombin, as well as larger high-affinity heparin fractions (having relative molecular masses between 6,000 and 21,500), all markedly accelerated the inhibition of Factor Xa by antithrombin. Moreover, all high-affinity oligosaccharides and heparins enhanced, to a similar extent, the amount of free proteolytically modified antithrombin cleaved at the reactive bond by Factor Xa. In contrast, a minimum high-affinity heparin size of approximately 18 monosaccharide units was required to significantly accelerate the inactivation of thrombin by antithrombin and to enhance the production of modified antithrombin by this enzyme. All high-affinity fractions studied had similar affinities for antithrombin, as determined by fluorescence titrations. In competition experiments, binary complexes of antithrombin with octadecasaccharide or larger high-affinity heparins, but not with smaller oligosaccharides, displaced inactivated 125I-thrombin from matrix-linked low-affinity heparin. Moreover, similar binary complexes with 3H-labeled octadecasaccharide or larger chains, but not with smaller oligosaccharides, were capable of binding to matrix-linked inactivated thrombin. These results indicate that simultaneous binding of antithrombin and thrombin to high-affinity heparin is a prerequisite to the acceleration of the antithrombin-thrombin reaction and that the minimum heparin sequence capable of binding both proteins comprises approximately 18 monosaccharide units. Similar complex formation apparently is not required for the acceleration of the antithrombin-Factor Xa reaction.     

Calcium inhibits the heparin-catalyzed antithrombin III/thrombin reaction by decreasing the apparent binding affinity of heparin for thrombin

The present study has shown that calcium inhibits the heparin-catalyzed antithrombin III/thrombin reaction. The initial rate of thrombin (4.0 nM) inhibition by antithrombin III (200 nM) in the presence of heparin (2.5 ng/ml) decreased from 3.6 nM/min (in the absence of calcium) to 0.12 nM/min in the presence of 10 mM calcium. In the absence of heparin, the initial rate of thrombin inhibition by antithrombin III was not affected by calcium. The heparin-catalyzed antithrombin III/thrombin reaction is described by the general rate equation for a random-order, bireactant, enzyme-catalyzed reaction (M. J. Griffith (1982) J. Biol. Chem. 257, 13899-13902). As such, the reaction is saturable with respect to both thrombin and antithrombin III. The apparent kinetic parameters for the heparin-catalyzed antithrombin III/thrombin reaction were determined in the presence and absence of calcium. The apparent heparin/antithrombin III dissociation constant values were not measurably different in the presence of 0, 1.0, and 3.0 mM calcium. The apparent heparin/thrombin dissociation constant value increased from 7.0 nM, in the absence of calcium, to 10 and 30 nM in the presence of 1.0 and 3.0 mM calcium, respectively. The maximum reaction velocity, at saturation with respect to both proteins, was not affected by calcium. It is concluded that calcium binds to functional groups within the heparin molecule which are required for thrombin binding.     

A method for rapid quantitation and preparation of antithrombin III-high-affinity heparin fractions

An electrophoretic method for the quantitation and preparation of antithrombin III-high-affinity heparin using agarose beds is described. The method allows the determination of high-affinity heparin fractions in several samples in one single step. The incubation mixture containing heparin and antithrombin III is submitted to agarose gel electrophoresis in 0.06 m barbital buffer, pH 8.6. A sharp separation between free antithrombin III, the complex antithrombin III-heparin, and free heparin occurs under these conditions. Around 30% of heparin molecules present in commerical preparations bind to antithrombin. This bound heparin has an anticoagulant activity of 240 IU. Negligible binding of other sulfated mucopolysaccharides to antithrombin III was observed. The whole procedure takes less than 6 h and can also be used as a semipreparative method for high-affinity heparin.     

Role of the antithrombin-binding pentasaccharide in heparin acceleration of antithrombin-proteinase reactions. Resolution of the antithrombin conformational change contribution to heparin rate enhancement.

The synthetic antithrombin-binding heparin pentasaccharide and a full-length heparin of approximately 26 saccharides containing this specific sequence have been compared with respect to their interactions with antithrombin and their ability to promote inhibition and substrate reactions of antithrombin with thrombin and factor Xa. The aim of these studies was to elucidate the pentasaccharide contribution to heparin's accelerating effect on antithrombin-proteinase reactions. Pentasaccharide and full-length heparins bound antithrombin with comparable high affinities (KD values of 36 +/- 11 and 10 +/- 3 nM, respectively, at I 0.15) and induced highly similar protein fluorescence, ultraviolet and circular dichroism changes in the inhibitor. Stopped-flow fluorescence kinetic studies of the heparin binding interactions at I 0.15 were consistent with a two-step binding process for both heparins, involving an initial weak encounter complex interaction formed with similar affinities (KD 20-30 microM), followed by an inhibitor conformational change with indistinguishable forward rate constants of 520-700 s-1 but dissimilar reverse rate constants of approximately 1 s-1 for the pentasaccharide and approximately 0.2 s-1 for the full-length heparin. Second order rate constants for antithrombin reactions with thrombin and factor Xa were maximally enhanced by the pentasaccharide only 1.7-fold for thrombin, but a substantial 270-fold for factor Xa, in an ionic strength-independent manner at saturating oligosaccharide. In contrast, the full-length heparin produced large ionic strength-dependent enhancements in second order rate constants for both antithrombin reactions of 4,300-fold for thrombin and 580-fold for factor Xa at I 0.15. These enhancements were resolvable into a nonionic component ascribable to the pentasaccharide and an ionic component responsible for the additional rate increase of the larger heparin. Stoichiometric titrations of thrombin and factor Xa inactivation by antithrombin, as well as sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the products of these reactions, indicated that pentasaccharide and full-length heparins similarly promoted the formation of proteolytically modified inhibitor during the inactivation of factor Xa by antithrombin, whereas only the full-length heparin was effective in promoting this substrate reaction of antithrombin during the reaction with thrombin.(ABSTRACT TRUNCATED AT 400 WORDS)     

Studies on the mechanism of the rate-enhancing effect of heparin on the thrombin-antithrombin III reaction.

The rate of the reaction between thrombin and antithrombin III is greatly increased in the presence of heparin. Several mechanisms for this effect are possible. To study the problems commercial heparin was fractionated into one fraction of high anticogulant activity and one of low anticoagulant activity by affinity chromatography on matrix-bound antithrombin III. The strength of the binding of the two heparin fractions to antithrombin III and thrombin, respectively, was determined by a crossed immunoelectrophoresis technique. As was to be expected, the high activity fraction was strongly bound to antithrombin III while the low activity fraction was weakly bound. In contrast, thrombin showed equal binding affinity for both heparin fractions. The ability of the two heparin fractions to catalyse the inhibition of thrombin by antithrombin III was determined and was found to be much greater for the high activity heparin fraction. A mechanism for the reaction between thrombin and antithrombin III in the presence of small amounts of heparin is suggested, whereby antithrombin III first binds heparin and this complex then inhibits thrombin by interaction with both the bound heparin and the antithrombin III.     

Effect of heparin on the glia-derived-nexin-thrombin interaction.

In order to determine the specificity of the interaction between thrombin and glia-derived nexin (GdN), the inactivation of proteolytically modified human thrombin species by GdN has been studied. The second-order rate constants for the inactivation of alpha-, beta T-, gamma T- and epsilon-thrombin by GdN were 1.41, 0.63, 0.33 and 1.91 microM-1.s-1 respectively. The kinetic properties of gdN were also investigated in the presence of different types of heparin, fractionated according to antithrombin III-binding affinity. Association rate constants of both gdN and antithrombin III with alpha-thrombin were obtained using unfractionated, low- and high-affinity heparin types. The different heparin types gave optimal rates of inhibition at similar heparin concentrations for both inhibitors. At optimal heparin concentrations, the rate of inactivation of alpha-thrombin by GdN was 0.5-1.2 nM-1.s-1, which suggests that, under these conditions, the interaction is diffusion-controlled.     

Molecular weight analysis of antithrombin III-heparin and antithrombin III-thrombin-heparin complexes

The molecular interactions between components of the heparin-catalyzed antithrombin III/thrombin reaction were investigated by light scattering. When heparin was added to antithrombin III, the molecular weight increased to a maximum and then decreased to that of a 1:1 (antithrombin III X heparin) complex. The initial molecular weights at low heparin to antithrombin III ratios were consistent with the formation of a 2:1 (antithrombin III X heparin) complex in which only one antithrombin III molecule had undergone the conformational change measured by protein fluorescence enhancement. The peak molecular weight never reached that of a complete 2:1 complex. This behavior was observed for bovine and human antithrombin III in the presence of both unfractionated heparin and high molecular weight-high affinity heparin. Pentosane polysulfate also caused some multiple associations. Bovine antithrombin III and thrombin formed a 1:1 complex that underwent further aggregation within minutes, while the human proteins did not aggregate on this time scale after forming the 1:1 complex. In the presence of stoichiometric amounts of heparin, the bovine proteins formed an initial complex of Mr = 230,000 (corresponding to a dimer of heparin-antithrombin III-thrombin) which underwent further aggregation. The human proteins, however, formed a 1:1 (antithrombin III X thrombin) initial complex in the presence of heparin, followed by aggregation. These interactions of thrombin and antithrombin with heparin suggest complex interactions that could relate to heparin function.     

Effect of a heparan sulphate with high affinity for antithrombin III upon inactivation of thrombin and coagulation factor Xa.

The kinetics of inhibition of human alpha-thrombin and coagulation Factor Xa by antithrombin III were examined under pseudo-first-order reaction conditions as a function of the concentration of heparan sulphate with high affinity for antithrombin III. The maximum observed second-order rate constant was, for the antithrombin III-thrombin reaction, 1.2 x 10(9) M-1.min-1 compared with 2.4 x 10(9) M-1.min-1 in the presence of high-affinity heparin. However, the maximum rate was catalysed by much higher concentrations of heparan sulphate (1.3 microM) than of heparin (0.025 microM). Differences were also observed in the maximal acceleration of the antithrombin III-Factor Xa interaction: 1.2 x 10(9) M-1.min-1 at 0.2 microM-heparin sulphate compared with 2.2 x 10(9) M-1.min-1 at 0.04 microM-heparin. The differences in properties of heparan sulphate and heparin were analysed by using the random bi-reactant model of heparin action [Griffith (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 5460-5464]. It was observed that the apparent binding affinity for thrombin was higher for heparan sulphate (180 nM) than for heparin (14 nM). The rate constant for transformation of the antithrombin III-Factor Xa complex into irreversible product differed between heparan sulphate (96 min-1) and heparin (429 min-1). These properties of the high-affinity heparan sulphate may be of importance in consideration of a putative role in the control of intravascular haemostasis.     

Preparation and characterization of monolconal antibodies against the human thrombin-antithrombin III complex

Monoclonal antibodies were raised against human thrombin-antithrombin III complex by a hybridoma technique. Among them, five monoclonal antibodies, designated as JITAT-4, -14, -16, -17 and -19, were found to react with thrombin-antithrombin III, but not with its nascent components, α-thrombin or antithrombin III. Their respective immunoglobulin classes are IgG₁ for JITAT-16 and -19, and IgG_2a for JITAT-4, -14 and -17. Besides the thrombin-antithrombin III complex, they all bound to the Factor Xa-antithrombin III complex and the active-site-cleaved two-chain antithrombin III as well. Moreover, the reactivity of these two antibodies to the neoantigens was not affected by heparin, suggesting that their epitopes are independent of heparin-induced conformational changes of antithrombin III. Two of them, JITAT-16 and -17, were categorized as high-affinity antibodies to thrombin-antithrombin III complex, the dissociation constants being 6.7 nM and 4.8 nM, respectively. However, they do not share antigenic determinants. These monoclonal antibodies may allow us to explore more precisely the reaction between antithrombin III and thrombin or its related enzymes.     

Kinetic analysis of various heparin fractions and heparin substitutes in the thrombin inhibition reaction

Kinetic characteristics of several heparin preparations and substitute heparins were determined to help understand the bases for activity differences. Several materials were highly active in factor Xa inhibition and the reaction rate at constant factor Xa concentration appeared to be predicted by the extent of intrinsic antithrombin III fluorescence change induced by the polysaccharide. Heparin fractions of different molecular weight and affinity for antithrombin III showed similar kinetic parameters in catalysis of the thrombin-antithrombin III reaction when these parameters were expressed on the basis of antithrombin III-binding heparin. The latter was determined by stoichiometric titration of the antithrombin III fluorescence change by the heparin preparation. However, the various heparin fractions showed very different specific activities per mg of total polysaccharide. This indicated that functional heparin molecules had similar kinetic properties regardless of size or antithrombin III-binding affinity and is possible because the Km for antithrombin III is determined by diffusion rather than by binding affinity. Substitute heparins and depolymerized heparin were poor catalysts for thrombin inhibition, due at least partially to their affinity for thrombin. This latter binary interaction inhibits thrombin reaction in the heparin-catalyzed reaction.     

Monitoring complex formation in the blood-coagulation cascade using aptamer-coated SAW sensors

Specific binding of the anticoagulants heparin and antithrombin III to the blood clotting cascade factor human thrombin was recorded as a function of time with a Love-wave biosensor array consisting of five sensor elements. Two of the sensor elements were used as references. Three sensor elements were coated with RNA or DNA aptamers for specific binding of human thrombin. The affinity between the aptamers and thrombin, measured using the biosensor, was within the same range as the value of K(D) measured by filter binding experiments. Consecutive binding of the thrombin inhibitors heparin, antithrombin III or the heparin-antithrombin III complex to the immobilized thrombin molecules, and binding of a ternary complex of heparin, anithrombin III, and thrombin to aptamers was evaluated. The experiments showed attenuation of binding to thrombin due to heparin-antithrombin III complex formation. Binding of heparin activated the formation of the inhibitory complex of antithrombin III with thrombin about 2.7-fold. Binding of the DNA aptamer to exosite II appeared to inhibit heparin binding to exosite I.     

Evidence for a plasma inhibitor of the heparin accelerated inhibition of factor Xa by antithrombin III.

The ability of heparin fractions of different molecular weight to potentiate the action of antithrombin III against the coagulation factors thrombin and Xa has been examined in purified reaction mixtures and in plasma. Residual thrombin and Xa have been determined by their peptidase activities against the synthetic peptide substrates H-D-Phe-Pip-Arg-pNA and Bz-Ile-Gly-Arg-pNA. High molecular weight heparin fractions were found to have higher anticoagulant activities than low molecular weight heparin when studied with both thrombin and Xa incubation mixtures in purified mixtures and in plasma. The inhibition of thrombin by heparin fractions and antithrombin III was unaffected by other plasma components. However, normal human plasma contained a component that inhibited the heparin and antithrombin III inhibition of Xa particularly when the high molecular weight heparin fraction was used. Experiments using a purified preparation of platelet factor 4 suggested that the platelet-derived heparin-neutralizing protein was not responsible for the inhibition.     

Reactive site peptide structural similarity between heparin cofactor II and antithrombin III

Heparin cofactor II (Mr = 65,600) was purified 1800-fold from human plasma to further characterize the structural and functional properties of the protein as they compare to antithrombin III (Mr = 56,600). Heparin cofactor II and antithrombin III are functionally similar in that both proteins have been shown to inhibit thrombin at accelerated rates in the presence of heparin. There was little evidence for structural homology between heparin cofactor II and antithrombin III when high performance liquid chromatography-tryptic peptide maps and NH2-terminal sequences were compared. A partially degraded form of heparin cofactor II was also obtained in which a significant portion (Mr = 8,000) of the NH2 terminus was missing. The rates of thrombin inhibition (+/- heparin) by native and partially degraded-heparin cofactor II were not significantly different, suggesting that the NH2-terminal region of the protein is not essential either for heparin binding or for thrombin inhibition. A significant degree of similarity was found in the COOH-terminal regions of the proteins when the primary structures of the reactive site peptides, i.e. the peptides which are COOH-terminal to the reactive site peptide bonds cleaved by thrombin, were compared. Of the 36 residues identified, 19 residues in the reactive site peptide sequence of heparin cofactor II could be aligned with residues in the reactive site peptide from antithrombin III. While the similarities in primary structure suggest that heparin cofactor II may be an additional member of the superfamily of proteins consisting of antithrombin III, alpha 1-antitrypsin, alpha 1-antichymotrypsin and ovalbumin, the differences in structure could account for differences in protease specificity and reactivity toward thrombin. In particular, a disulfide bond which links the COOH-terminal (reactive site) region of antithrombin III to the remainder of the molecule and is important for the heparin-induced conformational change in the protein and high affinity binding of heparin does not appear to exist in heparin cofactor II. This observation provides an initial indication that while the reported kinetic mechanisms of action of heparin in accelerating the heparin cofactor II/thrombin and antithrombin III/thrombin reactions are similar, the mechanisms and effects of heparin binding to the two inhibitors may be different.     

The catalysis by heparin of the reaction between thrombin and antithrombin

Fluorescence polarization has been used to study the kinetics of the combination of thrombin with antithrombin and its catalysis by the polysaccharide heparin. The heparin-catalysed combination of thrombin and antithrombin is saturable with respect to both thrombin and antithrombin. The rate-determining step of the reaction is approximately 1.7 s-1. The kinetics observed can be explained by proposing that the catalyst of the reaction is not heparin alone but a complex of heparin and antithrombin (bound at the high-affinity site). The temperature dependence of the heparin-catalysed reaction is indistinguishable from that of the uncatalysed reaction. This coincidence is consistent with the rate-limiting step being the same in both cases.     

The ternary complex of antithrombin-anhydrothrombin-heparin reveals the basis of inhibitor specificity

Antithrombin, the principal physiological inhibitor of the blood coagulation proteinase thrombin, requires heparin as a cofactor. We report the crystal structure of the rate-determining encounter complex formed between antithrombin, anhydrothrombin and an optimal synthetic 16-mer oligosaccharide. The antithrombin reactive center loop projects from the serpin body and adopts a canonical conformation that makes extensive backbone and side chain contacts from P5 to P6' with thrombin's restrictive specificity pockets, including residues in the 60-loop. These contacts rationalize many earlier mutagenesis studies on thrombin specificity. The 16-mer oligosaccharide is just long enough to form the predicted bridge between the high-affinity pentasaccharide-binding site on antithrombin and the highly basic exosite 2 on thrombin, validating the design strategy for this synthetic heparin. The protein-protein and protein-oligosaccharide interactions together explain the basis for heparin activation of antithrombin as a thrombin inhibitor.     

The effect of bovine thrombomodulin on the specificity of bovine thrombin

Bovine lung thrombomodulin is purified and used to investigate the basis of the change in substrate specificity of bovine thrombin when bound to thrombomodulin. Bovine thrombomodulin is a single polypeptide having an apparent molecular weight of 84,000 and associates with thrombin with high affinity and rapid equilibrium, to act as a potent cofactor for protein C activation and antagonist of reactions of thrombin with fibrinogen, heparin cofactor 2, and hirudin. Bovine thrombomodulin inhibits the clotting activity of thrombin with Kd less than 2.5 nM. Kinetic analysis of the effect of bovine thrombomodulin on fibrinopeptide A hydrolysis by thrombin indicates competitive inhibition with Kis = 0.5 nM. The active site of thrombin is little perturbed by thrombomodulin, as tosyl-Gly-Pro-Arg-p-nitroanilide hydrolysis and inhibition by antithrombin III are unaffected. Insensitivity of the reaction with antithrombin III is likewise observed with thrombin bound to thrombomodulin on intact endothelium. Antithrombin III-heparin, human heparin cofactor 2, and hirudin inhibit thrombin-thrombomodulin more slowly than thrombin. These effects may arise from a decrease in Ki of the inhibitors for thrombin-thrombomodulin or from changes in the active site not detected by tosyl-Gly-Pro-Arg-p-nitroanilide or antithrombin III. Bovine prothrombin fragment 2 inhibits thrombin clotting activity (Kd less than 7.5 microM) and acts as a competitive inhibitor of protein C activation (Kis = 2.1 microM). The data are consistent with a mechanism whereby thrombomodulin alters thrombin specificity by either binding to or allosterically altering a site on thrombin distinct from the catalytic center required for binding or steric accommodation of fibrinogen, prothrombin fragment 2, heparin cofactor 2, and hirudin.     

Measurement of the affinities of heparins, naturally occurring glycosaminoglycans, and other sulfated polymers for antithrombin III and thrombin

Heparin, other glycosaminoglycans, and synthetic sulfated polymers have antithrombotic and anticoagulant activities, which may be mediated through a range of interactions with different proteins. A simple, quantitative method has been developed for assessing the affinity of interaction between sulfated polymers and proteins in the liquid phase. This has been used to compare the binding of a range of glycosaminoglycans and other sulfated polymers to antithrombin III and thrombin, a major inhibitor of and a central protease in the coagulation system, respectively. The results are consistent with the binding of naturally occurring glycosaminoglycans to antithrombin III solely through the well-defined antithrombin III-binding pentasaccharide found in heparin, the apparent affinity of a preparation depending upon its content of this pentasaccharide. Highly sulfated synthetic polymers will, however, bind antithrombin III by a second mechanism. The affinity of heparin for thrombin decreased with decreasing molecular weight. However, results obtained with heparan sulfate preparations did not indicate any clear relationship between either molecular weight or sulfate content and thrombin binding, but suggested that there may be an oligosaccharide sequence containing N-sulfate residues which confers high affinity for thrombin. In addition, some of the synthetic sulfated polymers bound thrombin with very high affinity.     

Purification and properties of guinea pig antithrombin III

Guinea pig antithrombin III has been purified from plasma by sequential heparin-Sepharose affinity chromatography, DE-52 cellulose chromatography, isoelectric focussing, and Sephadex G-100 gel filtration chromatography. The final product was homogeneous as judged by sodium dodecyl sulfate disc gel electrophoresis. Purification was 202-fold with a yield of 41%. Antiproteinase activity of antithrombin III was determined by progressive inactivation of thrombin coagulant and amidolytic activity. Heparin cofactor activity was demonstrated by immediate inactivation of thrombin by antithrombin III in the presence of minute quantities of heparin. It also could be demonstrated that thrombin inactivation by antithrombin III occurs by formation of a bimolecular complex whose rate of formation is markedly enhanced by minute quantities of heparin.     

The N-terminal segment of antithrombin acts as a steric gate for the binding of heparin.

The binding of heparin causes a conformational change in antithrombin to give an increased heparin binding affinity and activate the inhibition of thrombin and factor Xa. The areas of antithrombin involved in binding heparin and stabilizing the interaction in the high-affinity form have been partially resolved through the study of both recombinant and natural variants. The role of a section of the N-terminal segment of antithrombin, residues 22-46 (segment 22-46), in heparin binding was investigated using rapid kinetic analysis of the protein cleaved at residues 29-30 by limited proteolysis with thermolysin. The cleaved antithrombin had 5.5-fold lowered affinity for heparin pentasaccharide and 1.8-fold for full-length, high-affinity heparin. It was shown that, although the initial binding of heparin is slightly enhanced by the cleavage, it dissociates much faster from the cleaved form, giving rise to the overall decrease in heparin affinity. This implies that the segment constituting residues 22-46 in the N terminus of antithrombin hinders access to the binding site for heparin, hence the increased initial binding for the cleaved form, whereas, when heparin is bound, segment 22-46 is involved in the stabilization of the binding interaction, as indicated by the increased dissociation constant. When the heparin pentasaccharide is bound to antithrombin prior to incubation with thermolysin, it protects the N-terminal cleavage site, implying that segment 22-46 moves to interact with heparin in the conformational change and thus stabilizes the complex.