Radial Gradients in Wood Specific Gravity,Water and Gas Content in Trees of a Mexican Tropical Rain Forest

Cell walls, water, and gas that have mechanical and physiological functions in wood, and wood specific gravity (WSG) is related to demographic traits. To understand variation in wood structure and function, we analyzed radial changes in WSG, in the gas and the water fractions from trees growing in four different habitats in a southern Mexican rain forest. Mean WSG was 0.55 ± 0.16, slightly lower than reported for other tropical forests. In 27 species, WSG decreased and in two species, it increased from pith to bark with a strong (r² = 0.65) negative correlation between WSG in the center of the tree and the radial WSG gradient. Habitat had some effect on mean WSG and trees growing on karst had significantly higher WSG than the same species growing on alluvial soil. The cell wall, water, and gas fractions accounted for 35 percent (range: 16–50), 42 percent (28–65), and 23 percent (2–56), respectively, of wood volume, with a negative correlation between the gas and the cell wall and between the gas and the water fractions, but not between the cell wall and water fractions. Radially increasing WSG is advantageous for pioneer trees with fast initial growth. We found that the water displacement method may result in biased WSG estimates. To increase the accuracy of WSG data, we suggest to measure sample volume geometrically using a constant diameter (that of the borer tip), to include radial variation in WSG, and to consider for possible site effects on species‐specific WSG.     

Pinoid woods with resin canals from the upper cretaceous of Hokkaido and Saghalien

This paper describes six species of permineralized pinoid woods with resin canals from the Upper Cretaceous of Hokkaido, Japan and Saghalien:Piceoxylon transiens Shimakura,P. scleromedullosum Shimakura,P. macroporosum sp. nov.,P. takahashii sp. nov.,Pinuxylon microporosum Ogura andPinoxylon dakotense (Knowlton) Read (new to Saghalien and the Cretaceous).Piceoxylon macroporosum is characterized by large resin canals and rays without ray tracheids and in lacking tylosoids in resin canals.Piceoxylon takahashii, which resemblesP. scleromedullosum, is distinguished from the latter in having ray tracheids and nests of sclereids in pith. Structure and affinities of the petrified plants from the Cretaceous of Northern Japan and Saghalien XVI. (continued from Ohsawaet al. 1995)     

Elevated atmospheric CO2 alters wood production, wood quality and wood strength of Scots pine (Pinus sylvestris L) after three years of enrichment

Scots pine ( Pinus sylvestris L.) trees were grown in open top chambers for three years under ambient and elevated CO₂ concentrations. The trees were aged 3 y at the beginning of the CO₂ exposure, and the effects of the treatment on total stem volume, stem wood biomass, wood quality and wood anatomy were examined at the end of the exposure. The elevated CO₂ treatment lead to a 49% and 38% increase in stem biomass and stem wood volume, respectively. However, no significant effects of the elevated CO₂ treatment on wood density were observed, neither when green wood density was estimated from stem biomass and stem volume, nor when oven-dry wood density was measured on small wood samples. Under elevated CO₂ significantly wider growth rings were observed. The effect of elevated CO₂ on growth ring width was primarily the result of an increase in earlywood width. Wood compression strength decreased under elevated CO₂ conditions, which could be explained by significantly larger tracheids and the increased earlywood band, that has thinner walls and larger cavities. A significant decrease of the number of resin canals in the third growth ring was observed under the elevated treatment; this might indicate that trees produced and contained less resin, which has implications for disease and pest resistance. So, although wood volume yield in Scots pine increased significantly with elevated CO₂ after three years of treatment, wood density remained unchanged, while wood strength decreased. Whilst wood volume and stem biomass production may increase in this major boreal forest tree species, wood quality and resin production might decrease under future elevated CO₂ conditions.     

The sites of radiation induced-breakage in human lymphocyte chromosomes, determined by quinacrine fluorescence

We have examined the distribution of 298 radiation-induced breakpoints in human chromosomes by quinacrine fluorescence. Very little damage was discovered which would not have been detectable with simple staining methods. The data suggest an excessive number of breaks in chromosomes 3 and a deficit in No. 16. The participation of chromosomes in rearrangements appears to be proportional to chromosome length. Within chromosome arms, breakpoints are selectively placed in telomeric regions.     

马尾松正常木与应压木的比较解剖

用光学显微镜和扫描电镜观察比较了马尾松(Pinus massoniana)正常木与应压木的结构差异。研究结果表明:马尾松应压木从早材到晚材呈缓变,管胞在横切面上除生长轮分界处的两侧外均为圆形,管胞之间具明显的胞间隙;管胞的次生壁仅有 S_1和 S_2两层;次生壁上螺纹间隙和螺纹裂隙都很明显,并与 S_2层微纤丝平行。此外,还初步讨论了应压木形成的可能机理。     

Wood anatomy and hydraulic architecture of stems and twigs of some Mediterranean trees and shrubs along a mesic-xeric gradient

Woody species populating the major Mediterranean ecosystems in the world are characterized by different levels of adaptation to the seasonal Mediterranean climate conditions. Many species of these ecosystems show wood features that allow high efficiency of transport when water is available, while maintaining hydraulic safety during drought periods. This study focuses on the anatomy of juvenile and mature wood of some species representative of continuous sequences of Mediterranean vegetation formations according to gradients of water availability, from xeric to relatively mesic: Cistus monspeliensis L., Rhamnus alaternus L., Myrtus communis L., Pistacia lentiscus L., Olea europaea L., Quercus ilex L., Fraxinus ornus L. and Ostrya carpinifolia L. Twigwood collected in Southern Italy was anatomically compared with the stemwood of the same species represented in the reference slide collection of the National Herbarium of the Netherlands (Lw). The “hydraulic distance” between the wood of main stems and twigs was estimated on the basis of suites of anatomical features related to water efficiency/safety. Although some attributes (i.e. porosity and type of imperforate tracheary elements) were similar in young twigs and older rings, other traits (i.e. vessel frequency and size) evidenced the different hydraulic properties of twig and stemwood. The difference between juvenile and mature structures was large in the species of the mesic end of the gradient while it was relatively small in those more xeric. This tendency is in agreement with the habit gradient from medium-sized trees to small evergreen/drought deciduous shrubs according to decreasing water availability in Mediterranean vegetation types.     

Cloning and expression analysis of a wood-associated xylosidase gene (PtaBXL1) in poplar tension wood

In stems of woody angiosperms responding to mechanical stress, imposed for instance by tilting the stem or formation of a branch, tension wood (TW) forms above the affected part, while anatomically distinct opposite wood (OW) forms below it. In poplar TW the S3 layer of the secondary walls is substituted by a “gelatinous layer” that is almost entirely composed of cellulose and has much lower hemicellulose contents than unstressed wood. However, changes in xylan contents (the predominant hemicelluloses), their interactions with other wall components and the mechanisms involved in TW formation have been little studied. Therefore, in the study reported here we determined the structure and distribution of xylans, cloned the genes encoding the xylan remodeling enzymes β-xylosidases (PtaBXLi), and examined their expression patterns during tension wood, normal wood and opposite wood xylogenesis in poplar. We confirm that poplar wood xylans are substituted solely by 4-O-methylglucuronic acid in both TW and OW. However, although glucuronoxylans are strongly represented in both primary and secondary layers of OW, no 4-O-methylGlcA xylan was found in G-layers of TW. Four full-length BXL cDNAs encoding putative β-xylosidases were cloned. One, PtaBXL1, for which xylosidase activity was confirmed by heterologous expression in Escherichia coli, exhibited a wood-specific expression pattern in TW. In conclusion, xylan as PtaBXL1, encoding β4-xylosidase activity, are down-regulated in TW.     

A comparison of the wood anatomy of 11 species from two cerrado habitats (cerrado s.s. and adjacent gallery forest)

A comparative study of the secondary xylem (wood) anatomy of 11 species (38 specimens) occurring in cerrado s.s. and the adjacent gallery forest (both cerrado s.l. habitat) was made with the aim of identifying the anatomical characteristics of ecological value and correlating them with the environmental conditions. The anatomical features that vary, in general, between the two habitats are: growth ring distinctness (well or poorly defined); tyloses and deposits (more abundant in cerrado specimens); gelatinous fibres (more evident in cerrado specimens and in different patterns between habitats); variation in paratracheal and banded parenchyma (more abundant in cerrado); and more cells per parenchyma strand in cerrado. In general, gallery forest specimens have wider vessels, fewer vessels per square millimetre and larger intervessel pits, indicating more efficient water conduction, whereas cerrado s.s. specimens are the opposite, with low vulnerability and mesomorphy indices, demonstrating greater safety under conditions of water stress. © 2012 The Linnean Society of London, Botanical Journal of the Linnean Society, 2012, ?? , ??–??.     

Does surface textural complexity of woody debris in lotic ecosystems influence their colonization by aquatic invertebrates?

Materials retained by river systems are diverse. Woody debris recruited from the riparian vegetation into streams is of variable sizes and varying surface textural complexity. The main aim of this study was to determine experimentally the colonization of wood recruited into a tropical stream by aquatic invertebrates and relate this to the degree of wood surface textural complexity. Wood, being alien to the wholly-aquatic and semi-aquatic invertebrates, provided an attachment substratum and was increasingly colonized by the invertebrates up to the 178th day. There was an initial increase in the taxa diversity up to the 9th day followed by a drastic decrease thereafter. Wood with smaller surface area had the higher invertebrate densities than those with large surface area, thus contrasting the expected trend. Our results show that the colonization by invertebrates of wood was scale-dependent. Invertebrates occupied the cracks, holes, protrusions, crevices and the small depressions found on the wood surface. Chironomidae (Order Diptera) made small tunnels in the more decayed parts of the wood and at the nodal areas. Wood decomposes slowly but it could cumulatively contribute more energy in its lifespan than the short-lived leaf litter which is more abundant in streams. Aquatic invertebrates encountering woody material in nature would make a trade-off between accepting a long-lasting resource and expending energy in continued search for the more palatable short-lived leafy material. The ecological and economic value of wood texture in streams and riparian vegetation management are poorly known and there is need for further research in the tropics.     

Late prehistoric wood use in an andean intermontane valley

Late Prehistoric Wood Use in an Andean Intermontane Valley. Economic Botany 59(4): 337-355, 2005. Data from carbonized wood remains from five late prehistoric sites (A.D. 1300–1530) in the Upper Mantaro Valley, Peru, are presented. The wood assemblage recovered is diverse. We illustrate and describe the twelve main morpho-types, one of which is more than likely to have been imported from the eastern slopes of the Andean mountains into the Mantaro Valley. The Inka conquest of the area created a change in socio-political power and also brought about a shift in the way wood species were utilized. From the Wanka II to the Inka occupations we find an increase in theBuddleja, Polylepis, Alnus, andColletia morpho-types: all of these species are reported as being cultivated by the Inka and possibly by pre-Inka inhabitants of the valley. A quantitative analysis shows higher amounts of wood in the elite dwellings of both the Wanka II and Wanka III times, suggesting a social aspect in the way this valuable Andean commodity was distributed and used.

---

Résumé   El Uso de Madera Prehistorico Tardio en un Valle Andino. Fueron analizados los restos de madera provenientes de cinco sitios del período prehistorico tardio (1300–1530 d.C.) del Alto Valle Mantaro, Perú. La asamblea de moderns era muy variada Ilutramos y describimos las doce categorías taxonómicas prinicipales, una de las cuales probablamente fue importada desde las cuestas orientales de los Andes. La conquista Inkaica de la región efectuó un cambio de énfasis en los morfotipos de madera usados, con un aumento deBuddleja, Polylepis,Alnus, yColletia. Un análisis cuantitativo muestra una concentracion de maderas en las habitaciones de la clase élite, sugeriendo un aspecto social en el uso de la madera.

     

Multilayered structure of tension wood cell walls in Salicaceae sensu lato and its taxonomic significance

Salicaceae have been enlarged to include a majority of the species formerly placed in the polyphyletic tropical Flacourtiaceae. Several studies have reported a peculiar and infrequently formed multilayered structure of tension wood in four of the tropical genera. Tension wood is a tissue produced by trees to restore their vertical orientation and most studies have focused on trees developing tension wood by means of cellulose‐rich, gelatinous fibres, as in Populus and Salix (Salicaceae s.s.). This study aims to determine if the multilayered structure of tension wood is an anatomical characteristic common in other Salicaceae and, if so, how its distribution correlates to phylogenetic relationships. Therefore, we studied the tension wood of 14 genera of Salicaceae and two genera of Achariaceae, one genus of Goupiaceae and one genus of Lacistemataceae, families closely related to Salicaceae or formerly placed in Flacourtiaceae. Opposite wood and tension wood were compared with light microscopy and three‐dimensional laser scanning confocal microscopy. The results indicate that a multilayered structure of tension wood is common in the family except in Salix, Populus and one of their closest relatives, Idesia polycarpa. We suggest that tension wood may be a useful anatomical character in understanding phylogenetic relationships in Salicaceae. Further investigation is still needed on the tension wood of several other putatively close relatives of Salix and Populus, in particular Bennettiodendron, Macrohasseltia and Itoa.     

Modelling of the hygroelastic behaviour of normal and compression wood tracheids

Compression wood conifer tracheids show different swelling and stiffness properties than those of usual normal wood, which has a practical function in the living plant: when a conifer shoot is moved from its vertical position, compression wood is formed in the under part of the shoot. The growth rate of the compression wood is faster than in the upper part resulting in a renewed horizontal growth. The actuating and load-carrying function of the compression wood is addressed, on the basis of its special ultrastructure and shape of the tracheids. As a first step, a quantitative model is developed to predict the difference of moisture-induced expansion and axial stiffness between normal wood and compression wood. The model is based on a state space approach using concentric cylinders with anisotropic helical structure for each cell-wall layer, whose hygroelastic properties are in turn determined by a self-consistent concentric cylinder assemblage of the constituent wood polymers. The predicted properties compare well with experimental results found in the literature. Significant differences in both stiffness and hygroexpansion are found for normal and compression wood, primarily due to the large difference in microfibril angle and lignin content. On the basis of these numerical results, some functional arguments for the reason of high microfibril angle, high lignin content and cylindrical structure of compression wood tracheids are supported.     

Wood density as a proxy of drought-induced forest dieback in silver fir

Drought-induced dieback is a matter of global concern. It has been widely reported and could compromise the climate warming mitigation potential of forests. That is why we need reliable early-warning proxies to achieve better forecasts of forest dieback and tree death. Tree-ring data can provide some of these needed proxies. Here I propose considering minimum (MND) and maximum (MXD) wood density values as proxies of tree vulnerability against drought. This hypothesis is evaluated in silver fir (Abies alba) forests from the western Spanish Pyrenees showing ongoing dieback processes after the severe 1985 drought. MXD increased in response to warm summer conditions in 1985 whereas MND increased in response to growing-season water deficit in 1986. The average between prior MXD (MXD_t-1) and subsequent MND (MND_t) could be used to detect severe drought impacts and forecast dieback.     

Fossil coniferous wood from the Middle Jurassic of Liaoning Province, China

Silicified coniferous wood was collected from the Lanqi Formation (late Middle Jurassic in age) at Shebudaigou Village, Liaoning Province, China. Three taxa are identified, namely Pinoxylon dacotense Knowlton, Xenoxylon phyllocladoides Gothan, and Araucariopitys sp. Based on these new data, and those of other fossil plants reported previously from the same formation, we consider the climate during the deposition of the Lanqi Formation was subtropical, humid and seasonal. In this respect the Lanqi flora differs from the coeval Shimengou and Longmen floras from North China. The Longmen flora was deposited during more humid, subtropical conditions, while the Shimengou Formation indicates that the climate was warm temperate and dry. Our data would suggest that the Late Jurassic climatic pattern was initiated as early as the late Middle Jurassic.     

木材上的微生物类群对木材的分解及其演替规律

论述了木材上的微生物类群以及各类群在木材生物分解过程中的演替规律 ,并解释了活立木心材能够发生腐朽的原因。结果表明 :能够生长在木材上的微生物类群有木材腐朽菌、木材软腐菌、木材变色菌、污染性霉菌、细菌、放线菌等多种。这些微生物类群共同合作完成对复杂的木质有机物质的生物分解。它们按一定次序进行作用 ,在木材生物分解的不同时期显示出明显的菌种协调与演替规律。一般情况是细菌、一些半知菌、接合菌和子囊菌等先驱微生物首先侵入 ,然后草本对策的木材腐朽菌开始出现 ,最后由竞争对策或忍耐对策的木腐菌取代草本对策的木腐菌 ,这时木材的分解过程就进入稳定的发展阶段 ,最后使木材分解或腐朽。木材腐朽最终是腐殖化阶段 ,这时微生物群落被土壤习居菌如毛霉、青霉、木霉、镰刀菌及细菌与放线菌等所取代。     

Rearing of the colydiid beetle predator, Dastarcus helophoroides, on artificial diet

Artificial diets for the colydiid beetle, Dastarcus helophoroides, a predator of cerambycid beetles and xylocopid bees, were evaluated. Hatched larvae were reared on artificial diets composed of silkworm pupa-powder, dry yeasts, yeast extract, sucrose, peptone, squid liver oil, preservatives and distilled water, but their emergence rate was very low. If larvae were fed paralyzed cerambycid larvae till they became approximately 8 mm in body length and then reared on artificial diet, emergence rates were high. Using the latter method, mass-production of this colydiid beetle is feasible.     

Tension wood fibers are related to gravitropic movement of red mangrove (Rhizophora mangle) seedlings

Freshly collected viviparous seedlings (propagules) were collected from wild plants of Rhizophora mangle and planted in vertical or horizontal positions. A total of 80 seedlings were examined anatomically at various ages and orientations. After rooting, seedlings reoriented from horizontal to vertical by extreme bending in the hook region of the hypocotyl directly above the basal 1 cm where roots formed. Hypocotyl bending occurred over many months. Trends in position and relative abundance of tension fibers (also called gelatinous fibers) over time were followed. The erection of the seedling was related to increased secondary xylem and the number of tension wood fibers on the upper side of the hook region. However, linear regressions had low coefficient of determination (r ²) values, presumably related to seedlings with high variability. Received: June 18, 2001 / Accepted: October 2, 2001     

长白山阔叶树种木质部环孔和散孔结构特征的分化导致其水力学性状的显著差异

木质部的解剖结构特征对树木水分传输功能有重要的影响,阔叶树种木质部环孔和散孔结构特征的分化,很可能导致两个功能类群在水力学结构上存在显著差异,但是有关两个功能类群间细致的水力学性状的对比研究还较少,二者整枝水平的导水率及纹孔水平的细致结构差异尚未见报道.本试验以长白山阔叶红松林常见的3个环孔材和4个散孔材乔木树种为研究对象,对比了两个功能类群树种的整枝导水率(k_shoot)、枝条木质部栓塞脆弱性(p_50)等重要水力学相关生理功能特征,并分析了两个功能类群间的木质部组织水平和纹孔水平上的解剖结构特征差异.结果表明:与茎段导水率差异一致,环孔材树种的整枝导水率也显著高于散孔材,但枝条木质部气穴化抵抗力显著弱于散孔材,二者的差异反映了整枝水平上木质部导水效率和安全性之间的权衡关系,与两个功能类群的水力学生理特征存在显著差异一致,二者在最大导管长度、导管直径、纹孔开口面积、纹孔开口比例等光学和扫描电镜观测解剖结构特征上都存在显著差异;木质部解剖特征(组织水平、纹孔水平)和k_shoot、p_50等生理特征间,以及木质部不同解剖特征之间存在显著的相关,且两个功能类群遵循相同的规律,反映了木质部结构对水分传输功能的重要影响,而导水率和气穴化抵抗力对木质部对立的结构要求,体现了树木水分传输系统构建的生物物理局限性.     

Volatile constituents of Cupressus dupreziana and the sesquiterpenes of Cupressus sempervirens

Analysis of wood essential oil of Cupressus dupreziana revealed 26 components: 13 monoterpenes and 13 sesquiterpenes. The main components were carv