Computed tomography analysis of radiostereometric data to determine flexion axes after total joint replacement: Application to the elbow joint

Kinematic analysis for in vivo assessment of elbow endoprostheses requires knowledge of the exact positions of motion axes relative to bony landmarks or the prosthesis. A prosthesis-based reference system is required for comparison between individuals and studies. The primary aim of this study was to further develop an earlier described algorithm for fusion of radiostereometric analysis (RSA) data and data obtained in 3D computed tomography (CT) for application to the elbow after total joint replacement. The secondary aim was to propose a method for marking of prostheses in 3D CT, enabling definition of a prosthesis-based reference system. Six patients with elbow endoprostheses were investigated.The fusion of data made it possible to visualize the motion axes in relation to the prostheses in the 3D CT volume. The differences between two repeated positioning repetitions of the longitudinal prosthesis axis were less than 0.6° in the frontal and sagittal planes. Corresponding values for the transverse axis were less than 0.6° in the frontal and less than 1.4° (in four out of six less than 0.6°) in the horizontal plane.This study shows that by fusion of CT and RSA data it is possible to determine the accurate position of the flexion axes of the elbow joint after total joint replacement in vivo. The proposed method for implant marking and registration of reference axes enables comparison of prosthesis function between patients and studies.     

Chin disfigurement following removal of alloplastic chin implants

Insertion and subsequent removal of alloplastic chin implants is not an innocuous procedure, as commonly believed. Ten women, aged 23 to 62 years of age (mean 45 years) are reported in whom severe soft-tissue deformities were observed 6 months to 6 years (mean 32 months) after removal of their implants. Resulting deformities consisted of chin ptosis and bizarre soft-tissue pogonial bunching and dimpling in repose or on animation in 9 of the 10 patients (90 percent). Asymmetrical motion of the lower lip was noted by 5 of the 10 patients. Two patients complained of pain and tenderness over the soft-tissue pogonion. The "bizarre" soft-tissue chin deformities, once established, are virtually uncorrectable. Presently, we recommend serious consideration be given to performing an immediate osseous genioplasty in patients requiring removal of alloplastic chin implants to prevent the evolution of such abnormalities.     

Stress and micromotion in the taper lock joint of a modular segmental bone replacement prosthesis

The stress distribution within the components and the micromotion of the interface significantly influence the long-term function of the taper lock joint in a modular segmental bone replacement prosthesis. Bending-induced gap opening between the cone and the sleeve can lead to an inflow of biological fluids, and thus accelerate implant corrosion. Local areas of high stress can also accelerate the corrosive processes and initiate local yielding, which may lead to a fracture in one of the components. In this study, a 3-D finite element (FE) model of a modular segmental bone replacement prosthesis was developed to study the interface micromotion and component stress distribution under the maximum loads applied during gait for a taper lock joint with multiple material combinations. Bending was the main cause of the local high stresses and interface separation within the taper joint. For Ti6A14V components, cortical bone bridging and ingrowth across the taper lock gap reduced the peak stress by 45% and reduced the contact interface separation by 55%. Such tissue formation around the taper lock joint could also form a closed capsule to restrict the migration of potential wear particles and thus prevent the biologic process of bone resorption induced by metal debris.     

Physiological considerations of muscle force through the elbow joint

An analytical model for the determination of muscle forces across the elbow joint during isometric loading conditions has been developed. The model incorporates the muscle length-tension relationship, while considering the muscle architecture. Sensitivity analyses were performed to study the effects of the geometric and architectural factors of the muscles on the distribution of muscle forces.     

Force matching at the elbow joint is disturbed by muscle soreness

These experiments are concerned with the ability of human subjects to match isometric torque in their elbow flexor muscles when biceps of one arm is made sore. Pain was induced by injection of hypertonic saline. Subjects were asked to generate a level of torque, 30% of maximum, with one arm, the reference arm. To achieve the required torque, subjects were given visual feedback. Subjects were then asked to match this torque with their other arm, the indicator arm. In control measurements, subjects were consistent in their matching ability and often were quite accurate. However, when biceps of one arm was made sore, subjects consistently and significantly underestimated the level of torque being generated by the sore arm. Painful heat applied to the skin over biceps produced a similar pattern of errors. Heating skin remote from elbow flexors had no significant effect. One interpretation of these findings is that the nociceptive input from the sore region of skin or muscle leads to reduced excitability of the motor cortex. That, in turn, disturbs the relationship between the centrally generated effort and motor output, leading to matching errors.     

Influence of the method of TM joint total replacement implantation on the loading of the joint on the opposite side

The temporomandibular (TM) joint is one of the most used joints in the human body, and any defect in this joint has a significant influence on quality of life. The objective of this study was to create a parametric numerical finite element (FE) analysis to compare the effect of surgical techniques used for total TM joint replacement implantation on loading the TM joint on the other side. Our hypothesis is that for the optimal function of all total TM joint replacements used in clinical practice it is crucial to devise a minimally invasive surgical technique, whereby there is minimum resection of masticatory muscles. This factor is more important than the design of the usually used total TM joint replacements. The extent of muscle resection influences the mechanical loading of the whole system. In the parametric FE analyses, the magnitude of the TM joint loading was compared for four different ranges of muscle resections during bite, using an anatomical model. The results obtained from all FE analyses support our hypothesis that an increasing extent of the muscle resection increased the magnitude of the TM joint overloading on the opposite side. The magnitude of the TM joint overloading increased depending on the muscle resection to 235% for bite on an incisor and up to 491% for bite on molars. Our study leads to a recommendation that muscle resection be minimised during replacement implantation and to a proposal that the attachment of the condylar part of the TM joint replacement be modified.     

Development of an image-based technique to examine joint congruency at the elbow

Identifying joint contact in articular joints is important for both the biomechanical investigation of joint mechanics and the study of osteoarthritis. The purpose of this study is to develop a proximity mapping technique to non-invasively determine joint congruency, as a surrogate of joint contact. To illustrate the capabilities of this algorithm, a cadaveric upper extremity was positioned at varying degrees of elbow flexion. This technique was validated using a gold standard experimental casting technique. The pattern of the cast showed an excellent agreement with the generated proximity map using the inter-bone distance algorithm. The results from this study agree with the results of previous studies examining joint contact at the elbow both in the location and in the tracking of the joint contact throughout elbow flexion. Ultimately, this technique will lead to an increased understanding of the effect of malalignment and instability of the joint on contact mechanics.     

Strategies used to stabilize the elbow joint challenged by inverted pendulum loading

The stiffness of activated muscles may stabilize a loaded joint by preventing perturbations from causing large displacements and injuring the joint. Here the elbow muscle recruitment patterns were compared with the forearm loaded vertically (a potentially unstable inverted pendulum configuration) and with horizontal loading. Eighteen healthy subjects were studied with the forearm vertical and supinated and the elbow flexed approximately 90 degrees. In the first experiment EMG electrodes recorded activity of biceps, triceps, and brachioradialis muscles for joint torques produced (a) by voluntarily exerting a horizontal force isometrically (b) by voluntarily flexing and extending the elbow while the forearm was loaded vertically with 135N. The relationship between the EMG and the torque generated was quantified by the linear regression slope and zero-torque intercept. In a second experiment a vertical load increasing linearly with time up to 300N was applied.In experiment 1 the EMG-torque relationships for biceps and triceps had an intercept about 10% of maximum voluntary effort greater with the vertical compared to the horizontal force, the inverse was found for Brachioradialis, but the EMG-torque slopes for both agonist and antagonistic muscles were not different. In experiment 2 there were 29 trials with minimal elbow displacement and all the three muscles activated on the order of 11% of maximum activation to stabilize the elbow; 19 trials had small elbow extension and 14 trials small flexion requiring altered muscle forces for equilibrium; 7 trials ended in large unstable displacement or early termination of the test. An analysis indicate that the observed levels of muscle activation would only provide stability if the muscles' short-range stiffness was at the high end of the published range, hence the elbow was marginally stable. The stability analysis also indicated that the small elbow extension increased stability and flexion decreased stability.     

Viscosity of the flexor muscles of the elbow joint under maximum contraction condition

The maximum contractile moments developed by the elbow flexors of eleven normal subjects at different elbow angles were measured, both isometrically and at various shortening velocities. The results were used to predict the damping coefficient of the viscous element of the elbow flexor muscles and soft tissue under maximum contraction condition for various angles and shortening velocities.