Induction of differentiation in a human promyelocytic leukemic cell line (HL-60). Production of granule proteins

Serum fibronectin inhibits the adhesion of neutrophil granulocytes (PMNs) to clean glass, HSA-coated glass, and gelatin-coated glass. It does not affect adhesion to collagen-coated glass which itself provides a substratum of low adhesiveness for PMNs. Cell-cell adhesion is not affected. During the acute inflammatory response in vivo, PMNs must migrate through the fibronectin and collagen containing extracellular matrix: reducing cell-substratum adhesion in these circumstances might facilitate locomotion towards inflammatory foci.     

Efficiency as a predictor of human jaw design in the sagittal plane

The effects of changing the direction of the bite force and of the mandibular joint reaction have been studied with a mathematical model assisted by a computer using the technique of linear programming. We conclude the following: In the sagittal plane the long axes of lower molars are each tilted in the direction that most efficiently converts muscle force into work at the bite point rather than in the direction that would maximize static bite force. These genetically determined angles are referred to as the most 'work efficient' angles. Collectively they lead to the appearance of the curve of Spee associated with the postcanines. Given the most work efficient angle of the first molar, the model indicates for bite forces generated in this direction the joint reaction is least when tilted forward from the vertical at between 20 degrees and 30 degrees. The joint reaction is normal to the articular surface of the condyle which is itself tilted forward 20-30 degrees from the occlusal plane. We conclude the condyle and articular eminence are remodelled to the angle that minimizes the joint reaction. The direction of the bite force may be controlled via neuronal circuitry connecting mechanoreceptors of the periodontal ligament with motor nerves supplying the jaw-closing muscles. The height of the occlusal plane in the molar region has little effect on jaw efficiency.     

Importance of convection to the enhancement of erythrocyte sedimentation rates in inclined tubes

Erythrocytes were settled from whole blood in standard 200 x 2.5 mm erythrocyte settling rate tubes placed vertically and at various angles from 85 degrees to 15 degrees from the horizontal. In all cases sedimentation rates measured along the slope increased with decreasing angle from the horizontal. Vertical settled distances rapidly increased down to an angle of 70 degrees and then changed very little even down to angles as shallow as 30 degrees. Evidence is presented that convection plays a significant role in the inclined settling of erythrocytes, as has already been demonstrated with clay, or glass bead suspensions in water. Inclined settling enhancements obtained are quite similar to those observed under similar conditions with yeast cells in aqueous glucose.     

Effect of body tilt on calf muscle performance and blood flow in humans.

To explore the effect of posture on muscle performance, we tested the effects of body tilt angle on the strength, endurance, and fatigue of, and blood flow into, the plantar flexors. Human subjects were fixed to a tilt table that could tilt them from the horizontal (0 degrees ) to upright (90 degrees ) position and enabled force to be applied to a footplate through isometric action of the right calf muscle. In experiment 1, six subjects performed a strength test and graded test (intermittent contractions) to the point of failure at three tilt angles (0, 47, and 90 degrees ). In Experiment 2, seven subjects performed a strength test and constant-force test [70% maximum force (F(max)); intermittent contractions] to the point of failure in the horizontal and three inclined positions (32, 47, and 67 degrees ). In experiment 3, leg blood flow was assessed during constant-force exercise at two intensities (30 and 70% F(max)) and two tilt angles (0 and 67 degrees ) in six subjects. Strength was not affected (P > 0.05) by tilt angle. Time to failure during the graded test was significantly higher at 47 degrees (25.9 +/- 2.0 min) and 90 degrees (25.1 +/- 3.0 min) than 0 degrees (22.2 +/- 2.6 min). Time to failure during the constant-force test was also significantly higher at 32 degrees (7.1 +/- 3.6 min), 47 degrees (8.0 +/- 5.2 min), and 67 degrees (8.6 +/- 5.6 min) compared with 0 degrees (4.0 +/- 2.6 min). When graded or constant-force exercise was performed with arterial flow to the leg eliminated, there were no differences in exercise time between the horizontal and an inclined position. During nonischemic exercise, leg blood flow was significantly higher during exercise in the inclined position. These results demonstrate that head-up tilt improves endurance of the plantar flexors, that this effect occurs in the absence of an effect on strength, and that it depends on an intact peripheral circulation. Moreover, the postural effect on muscle endurance appears to be due to a greater blood flow into the leg, an effect that is established during the initial contractions.     

Numerical investigation of the role of intercellular interactions on collective epithelial cell migration

During collective cell migration, the intercellular forces will significantly affect the collective migratory behaviors. However, the measurement of mechanical stresses exerted at cell–cell junctions is very challenging. A recent experimental observation indicated that the intercellular adhesion sites within a migrating monolayer are subjected to both normal stress exerted perpendicular to cell–cell junction surface and shear stress exerted tangent to cell–cell junction surface. In this study, an interfacial interaction model was proposed to model the intercellular interactions for the first time. The intercellular interaction model-based study of collective epithelial migration revealed that the direction of cell migration velocity has better alignment with the orientation of local principal stress at higher maximum shear stress locations in an epithelial monolayer sheet. Parametric study of the effects of adhesion strength indicated that normal adhesion strength at the cell–cell junction surface has dominated effect on local alignment between the direction of cell velocity vector and the principal stress orientation, while the shear adhesion strength has little effect, which provides compelling evidence to help explain the force transmission via cell–cell junctions between adjacent cells in collective cell motion and provides new insights into “adhesive belt” effects at cell–cell junction.     

Analysis of cell locomotion

The methods of statistical physics have been applied to the analysis of cell movement. Human polymorphonuclear leukocytes were exposed to different surfaces possessing parallel oriented physical stuctures (scratched glass surface, machine drilled aluminium surface, optical grid and stretched polyethylene foil) and cell migration was observed using time-lapse photography.We demonstrate that in cell migration along physical structures, referred to as contact guidance, two subgroups can be distinguished: 1) The nematic type where the cell size is large in relation to the grid distance of the undulate surface. 2) The smectic type where the cell size is small in relation to the grid distance of the substrate.Nematic contact guidance is characterized by an anisotropic random walk. In all substrates investigated the diffusion process parallel to the lines was faster than the diffusion process perpendicular to them. The angular dependent diffusion coefficient was described by an ellipse. Deviation from a circle defined an apolar order parameter, whose value was about 0.3. The amount of information which the cells collected from, the undulate surface was very low, between 0.1 and 0.2 bits. We demonstrate that cells do not recognize all the details of their surroundings and that their migration can be compared to the groping around of a short sighted man. The blurred environment can be described by a mean field whose strength is proportional to the aploar order parameter. It is argued that the anisotropic surface tension is the basic source for nematic contact guidance.Smectic contact guidance is characterized by an anisotropic random walk and is quantified by a density order paramter which is 0.28 in the case of the scratched glass surface of a Neubauer counting chamber. The information which the cells collect from their environment is very low (0.03 bits). The lines seen by the cell can be described by a mean field whose strength is proportional to the density oder parameter.Finally, we demonstrate that the locomotion of granulocytes is governed by an internal clock and internal programs. After migrating for a certain time (32 s) in a particular direction, a new direction of locomotion is determined by an internal program. The cell decides basically between left or right, thereby preferring a turn angle such that the cell migrates either parallel or perpendicular to the lines. the angles are nearly equally probable but the cell moves, in the case of nematic guidance, with different velocities in the +or-direction. The cell also has directional memories with characteristic times of 32 s and greater than 100 s.     

Quantitative measurement of changes in adhesion force involving focal adhesion kinase during cell attachment, spread, and migration

Focal adhesion kinase (FAK) is a critical protein for the regulation of integrin-mediated cellular functions and it can enhance cell motility in Madin-Darby canine kidney (MDCK) cells by hepatocyte growth factor (HGF) induction. We utilized optical trapping and cytodetachment techniques to measure the adhesion force between pico-Newton and nano-Newton (nN) for quantitatively investigating the effects of FAK on adhesion force during initial binding (5 s), beginning of spreading (30 min), spreadout (12 h), and migration (induced by HGF) in MDCK cells with overexpressed FAK (FAK-WT), FAK-related non-kinase (FRNK), as well as normal control cells. Optical tweezers was used to measure the initial binding force between a trapped cell and glass coverslide or between a trapped bead and a seeded cell. In cytodetachment, the commercial atomic force microscope probe with an appropriate spring constant was used as a cyto-detacher to evaluate the change of adhesion force between different FAK expression levels of cells in spreading, spreadout, and migrating status. The results demonstrated that FAK-WT significantly increased the adhesion forces as compared to FRNK cells throughout all the different stages of cell adhesion. For cells in HGF-induced migration, the adhesion force decreased to almost the same level (approximately 600 nN) regardless of FAK levels indicating that FAK facilitates cells to undergo migration by reducing the adhesion force. Our results suggest FAK plays a role of enhancing cell adhesive ability in the binding and spreading, but an appropriate level of adhesion force is required for HGF-induced cell migration.     

Locomotion of white blood cells: a biophysical analysis

We determined some biophysical properties of human granulocytes, monocytes, and lymphocytes in respect to their locomotion. Granulocytes were exposed to plasma and were allowed to crawl on uncoated or glycol methacrylate coated glass plates. Monocytes did not migrate on uncoated glass, but did so on glycol methacrylated glass. Lymphocytes did not move on glass or glycol methacrylated glass, but moved on plexiglas coverslips. Granulocytes and monocytes showed a pronounced, directed movement towards a lysed erythrocyte (necrotaxis), lymphocytes showed no necrotactic response. The information collected by the granulocytes and monocytes in the necrotactic gradient was between 1 and 2 bits. This small amount of information indicated that the cellular decision in favor of a new direction of migration is based on a mechanism involving instability. We showed that the necrotactic response of granulocytes and monocytes is the product of the chemokinetic activity and the polar order parameter (= McCutcheon index) indicating that the cellular decision for a new direction of migration is independent of the speed of the cell movement. The movement of monocytes can be characterized in a similar way to that of granulocytes: the angle of deviation from a straight line path is nearly a fixed value (+/- 35 degrees). Lymphocytes stay in a restricted area after straight line movement. Particular attention was focused on cellular properties involved in locomotion. The characteristic time of the internal clock controlling the locomotion was 0.9 minutes for granulocytes and 2 minutes for monocytes. We were not able to determine the characteristic time of lymphocytes. We were able to determine the internal program responsible for the change in direction of movement. The directional memory time for granulocytes was 0.9 minutes. Monocytes had two directional memory times, short (2 minutes) and long (greater than 18 minutes). Lymphocytes had a very short directional memory time of 40 seconds. The distribution of the track velocities of migrating granulocytes and monocytes was described by bell shaped curves indicating homogeneous populations of cells. The distribution for lymphocytes had two maxima.     

Analysis of force vector field during centrifugation for optimizing cell sheet adhesion

A three-dimensional tissue was fabricated by layering cell sheets with centrifugation. In this system, an optimal centrifugal force promoted the adhesion between (a) a cell sheet and a culture dish, and (b) layered cell sheets, resulting in a significant decrease in the fabrication time of the tissue. However, negative effects like sliding/significant deformation of cell sheets were observed upon high rotational speed use. These negative effects inhibit the further shortening of the fabrication time. The sliding/deformation suggests that the centrifugal forces were applied on the cell sheets in unwanted directions. Studies on the force vector field applied to the object placed on the plate during centrifugation are not available, and thus, the reason for the occurrence of such negative effects is unclear. Here, we theoretically derived the spatial distribution of acceleration applied on a plate during centrifugation. Using this theory, we found that the negative effects were triggered by the centrifugal force in the direction parallel to the plate surface, which appeared due to an inclination of the plate surface against a horizontal plane. Therefore, by adding weights on the plate edge to maintain the plate surface in a horizontal position, we succeeded in eliminating the negative effects and in increasing the rotational speed, with the minimum risk of sliding/deformation of cell sheets. We succeeded in reducing the time to establish tight adhesion between a mouse myoblast sheet and a culture dish, and layered cell sheets by increasing the centrifugal force from 5 min to 1 min without significant cytotoxicity.     

Cell Migration and Cell-Cell Interaction in the Presence of Mechano-Chemo-Thermotaxis

Although there are several computational models that explain the trajectory that cells take during migration, till now little attention has been paid to the integration of the cell migration in a multi-signaling system. With that aim, a generalized model of cell migration and cell-cell interaction under multisignal environments is presented herein. In this work we investigate the spatio-temporal cell-cell interaction problem induced by mechano-chemo-thermotactic cues. It is assumed that formation of a new focal adhesion generates traction forces proportional to the stresses transmitted by the cell to the extracellular matrix. The cell velocity and polarization direction are calculated based on the equilibrium of the effective forces associated to cell motility. It is also assumed that, in addition to mechanotaxis signals, chemotactic and thermotactic cues control the direction of the resultant traction force. This model enables predicting the trajectory of migrating cells as well as the spatial and temporal distributions of the net traction force and cell velocity. Results indicate that the tendency of the cells is firstly to reach each other and then migrate towards an imaginary equilibrium plane located near the source of the signal. The position of this plane is sensitive to the gradient slope and the corresponding efficient factors. The cells come into contact and separate several times during migration. Adding other cues to the substrate (such as chemotaxis and/or thermotaxis) delays that primary contact. Moreover, in all states, the average local velocity and the net traction force of the cells decrease while the cells approach the cues source. Our findings are qualitatively consistent with experimental observations reported in the related literature.     

Mobilization of neutrophil sialidase activity desialylates the pulmonary vascular endothelial surface and increases resting neutrophil adhesion to and migration across the endothelium

The amount of sialic acid on the surface of the neutrophil (PMN) influences its ability to interact with other cells. PMN activation with various stimuli mobilizes intracellular sialidase to the plasma membrane, where it cleaves sialic acid from cell surfaces. Because enhanced PMN adherence, spreading, deformability, and motility each are associated with surface desialylation and are critical to PMN diapedesis, we studied the role of sialic acid on PMN adhesion to and migration across pulmonary vascular endothelial cell (EC) monolayers in vitro. Neuraminidase treatment of either PMN or EC increased adhesion and migration in a dose-dependent manner. Neuraminidase treatment of both PMNs and ECs increased PMN adhesion to EC more than treatment of either PMNs or ECs alone. Moreover, neuraminidase treatment of ECs did not change surface expression of adhesion molecules or release of IL-8 and IL-6. Inhibition of endogenous sialidase by either cross-protective antineuraminidase antibodies (45.5% inhibition) or competitive inhibition with pseudo-substrate (41.2% inhibition) decreased PMN adhesion to ECs; the inhibitable sialidase activity appeared to be associated with activated PMNs. Finally, EC monolayers preincubated with activated PMNs became hyperadhesive for subsequently added resting PMNs, and this hyperadhesive state was mediated through endogenous PMN sialidase activity. Blocking anti-E-selectin, anti-CD54 and anti-CD18 antibodies decreased PMN adhesion to tumor necrosis factor-activated ECs but not to PMN-treated ECs. These data implicate desialylation as a novel mechanism through which PMN-EC adhesion can be regulated independent of de novo protein synthesis or altered adhesion molecule expression. The ability of activated PMNs, through endogenous sialidase activity, to render the EC surface hyperadherent for unstimulated PMNs may provide for rapid amplification of the PMN-mediated host response.     

Center of pressure and center of mass behavior during gait initiation on inclined surfaces: A statistical parametric mapping analysis

This study analyzed gait initiation (GI) on inclined surfaces with 68 young adult subjects of both sexes. Ground reaction forces and moments were collected using two AMTI force platforms, of which one was in a horizontal position and the other was inclined by 8% in relation to the horizontal plane. Departing from a standing position, each participant executed three trials in the following conditions: horizontal position (HOR), inclined position at ankle dorsi-flexion (UP), and inclined position at ankle plantar-flexion (DOWN). Statistical parametric mapping analysis was performed over the entire center of pressure (COP) and center of mass (COM) time series. COP excursion did not show significant differences in the medial-lateral (ML) direction in both inclined conditions, but it was greater in the anterior-posterior (AP) direction for both inclined conditions. COP velocities are smaller in discrete portions of GI for the UP and DOWN conditions. COM displacement was greater in the ML direction during anticipatory postural adjustments (APA) in the UP condition, and COM moves faster in the ML direction during APA in the UP condition but slower at the end of GI for both the UP and the DOWN conditions. The COP-COM vector showed a greater angle in the DOWN condition. We observed changes for COP and COM in GI in both the UP and the DOWN conditions, with the latter showing changes for a great extent of the task. Both the UP and the DOWN conditions showed increased COM displacement and velocity. The predominant characteristic during GI on inclined surfaces, including APA, appears to be the displacement of the COM.     

Interstitial cell migration: integrin-dependent and alternative adhesion mechanisms

Adhesion and migration are integrated cell functions that build, maintain and remodel the multicellular organism. In migrating cells, integrins are the main transmembrane receptors that provide dynamic interactions between extracellular ligands and actin cytoskeleton and signalling machineries. In parallel to integrins, other adhesion systems mediate adhesion and cytoskeletal coupling to the extracellular matrix (ECM). These include multifunctional cell surface receptors (syndecans and CD44) and discoidin domain receptors, which together coordinate ligand binding with direct or indirect cytoskeletal coupling and intracellular signalling. We review the way that the different adhesion systems for ECM components impact cell migration in two- and three-dimensional migration models. We further discuss the hierarchy of these concurrent adhesion systems, their specific tasks in cell migration and their contribution to migration in three-dimensional multi-ligand tissue environments.     

THE GEOTROPIC RESPONSE IN ASTERINA

Upon a surface inclined at angle α Asterina gibbosa orients upward during negatively geotropic creeping until the average angle (θ) of the path is such that Δ sin θ/Δ sin α = const. This is true also in positively geotropic movement. The direction of orientation may be temporarily reversed by mechanical disturbance. The variation of θ is greater at low slopes. Tests with directed impressed pulls, due to an attached cork float, show that the pull upon the tube feet is of primary consequence for the determination of θ. When the component of gravitational pull in the direction of movement reaches a fraction of the total pull which is proportional to the gravitational vector parallel to the surface, the laterally acting component is ineffective. On this basis, it follows that Δ sin θ/Δ sin α = const.     

GEOTROPISM OF AGRIOLIMAX

On an inclined glass plate the slug Agriolimax orients and creeps upward or downward. The angle of orientation on the plane (θ) is proportional to the logarithm of the component of gravity in the creeping plane. The coefficient of variability of the measured values of (θ) decreases linearly as the logarithm at the gravity component in the creeping plane increases. The cosine of the angle of orientation decreases almost directly in proportion to the sine of the angle of inclination of the creeping plane to the horizontal, as previously found for young rats (Crozier and Pincus). But a more satisfactory formulation for the present case shows that the sine of the angle of orientation (θ) decreases in direct proportion to the increase of the reciprocal of the sine of the angle of inclination of the creeping plane. This formulation is derived from the theory that the geotropic orientation is limited by the threshold difference between the pull of the body mass on the mutually inclined longitudinal muscles at the anterior end of the slug.     

Effects of glutamine on adhesion molecule expression and leukocyte transmigration in endothelial cells exposed to arsenic

This study evaluated whether glutamine (GLN) concentration was related to endothelial surface molecule expression and the migration of polymorphonuclear neutrophils (PMNs) through endothelial cells (ECs) stimulated by arsenic. Human umbilical vein endothelial cells (HUVECs) and PMNs were treated with different GLN concentrations (0, 300, 600 and 1000 microM) for 24 h. After that, we stimulated HUVECs for 3 h with 0.5 microM arsenic, and PMNs were allowed to transmigrate to ECs for 2 h. HUVEC surface expressions of cell adhesion molecules and integrin (CD11b) and interleukin (IL)-8 receptor expressions on PMNs were measured. The transendothelial migration of PMNs was also analyzed. The results showed that cell adhesion molecule (CAM) and integrin expressions in arsenic groups were higher than in those without arsenic. Among the arsenic groups, the expression of CAMs on ECs and CD11b, and IL-8 receptor on PMNs was lowest with 0 microM compared with the other GLN concentrations. Vascular CAM-1 on ECs and CD11b on PMN expression were higher with 300 microM than with 600 and 1000 microM GLN. IL-8 secretions from ECs and PMNs were higher with 300 muM than with 600 and 1000 microM GLN, and this was consistent with the expression of the IL-8 receptor on PMNs. Polymorphonuclear neutrophil transmigration was significantly higher with 300 muM GLN than with other GLN concentrations. These results suggest that ECs and PMNs were activated after arsenic stimulation. Cell adhesion molecule expressions on ECs and PMNs were suppressed in the absence of GLN. A low GLN concentration comparable to catabolic conditions resulted in higher adhesion molecule expression and greater transendothelial migration of neutrophils. Glutamine administration at levels similar to or higher than physiological concentrations reduced IL-8 and adhesion molecule expression; PMN transmigration was also decreased after stimulation with arsenic.     

Subfibrillar structure of type I collagen observed by atomic force microscopy.

We have imaged native rat tail and reconstituted bovine dermal type I collagen by atomic force microscopy, obtaining a level of detail comparable to that obtained on the same samples by transmission electron microscopy. The characteristic 60-70 nm D periodicity consists of ridges exhibiting high tip-sample adhesion alternating with 5-15-nm-deep grooves having low adhesion. We also observe an intraperiod or "minor" band consisting of 1-nm-deep grooves, and "microfibrils" arranged parallel to or inclined approximately 5 degrees to the fibril axis. In air collagen fibrils exhibit negligible compression under the forces exerted by the tip. When immersed in water the subfibrillar features disappear and the fibrils become softer, compressing by 5% of their height under an 11-nN force. Material on the surface of the sample sometimes accumulates on the atomic force microscope tip; contrary to expectation such tip contamination can improve as well as reduce resolution.     

Hydrodynamics of Sperm Cells near Surfaces

Sperm are propelled by an actively beating tail, and display a wide variety of swimming patterns. When confined between two parallel walls, sperm swim either in circles or on curvilinear trajectories close to the walls. We employ mesoscale hydrodynamics simulations in combination with a mechanical sperm model to study the swimming behavior near walls. The simulations show that sperm become captured at the wall due to the hydrodynamic flow fields which are generated by the flagellar beat. The circular trajectories are determined by the chiral asymmetry of the sperm shape. For strong (weak) chirality, sperm swim in tight (wide) circles, with the beating plane of the flagellum oriented perpendicular (parallel) to the wall. For comparison, we also perform simulations based on a local anisotropic friction of the flagellum. In this resistive force approximation, surface adhesion and circular swimming patterns are obtained as well. However, the adhesion mechanism is now due to steric repulsion, and the orientation of the beating plane is different. Our model provides a theoretical framework that explains several distinct swimming behaviors of sperm near and far from a wall. Moreover, the model suggests a mechanism by which sperm navigate in a chemical gradient via a change of their shape.     

Biomechanical capabilities influence postural control strategies in the cat hindlimb

During postural responses to perturbations, horizontal plane forces generated by the cat hindlimb are stereotypically directed either towards or away from the animal's center of mass, independent of perturbation direction. We used a static, three-dimensional musculoskeletal model of the hindlimb to investigate possible biomechanical determinants of this "force constraint strategy." We hypothesized that directions in which the hindlimb can produce large forces are preferentially used in postural control. We computed feasible force sets (FFSs) based on hindlimb configurations of three cats during postural equilibrium tasks and compared them to horizontal plane postural force directions. The grand mean FFS was bimodal, with maxima near the posterior-anterior axis (-86+/-8 degrees and 71+/-4 degrees ), and minima near the medial-lateral axis (177+/-8 degrees and 8+/-8 degrees ). Experimental postural force directions clustered near both maxima; there were no medial postural forces near the absolute minimum. However, the medians of the anterior and posterior postural force direction histograms in the right hindlimb were rotated counter-clockwise from the FFS maxima (p<0.05; Wilcoxon signed-rank test). Because the posterior-anterior alignment of the FFS is consistent with a hindlimb structure optimized for locomotion, we conclude that the biomechanical capabilities of the hindlimb strongly influence, but do not uniquely determine the force directions observed in the force constraint strategy. Forces used in postural control may reflect a balance between a neural preference for using forces in the directions of large feasible forces and other criteria, such as the stabilization of the center of mass, and muscular coordination strategies.