A tetrameric porin limits the cell wall permeability of Mycobacterium smegmatis

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant against many antibiotics. Pore proteins mediate the diffusion of hydrophilic nutrients across this membrane. Electron microscopy revealed that the outer membrane of Mycobacterium smegmatis contained about 1000 protein pores per microm(2), which are about 50-fold fewer pores per microm(2) than in Gram-negative bacteria. The projection structure of the major porin MspA of M. smegmatis was determined at 17 A resolution. MspA forms a cone-like tetrameric complex of 10 nm in length with a single central pore. Thus, MspA is drastically different from the trimeric porins of Gram-negative bacteria and represents a new class of channel proteins. The formation of MspA micelles indicated that the ends of MspA have different hydrophobicities. Oriented insertion of MspA into membranes was demonstrated in lipid bilayer experiments, which revealed a strongly asymmetrical voltage gating of MspA channels at -30 mV. The length of MspA is sufficient to span the outer membrane and contributes in combination with the tapering end of the pore and the low number of pores to the low permeability of the cell wall of M. smegmatis for hydrophilic compounds.     

Topology of the porin MspA in the outer membrane of Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the outer membrane (OM). It is the prototype of a new family of octameric porins with a single central channel of 9.6 nm in length and consists of two hydrophobic beta-barrels of 3.7 nm in length and a more hydrophilic, globular rim domain. The length of the hydrophobic domain of MspA does not match the thicknesses of mycobacterial OMs of 5-12 nm as derived from electron micrographs. Further, the membrane topology of MspA is unknown as it is for any other mycobacterial OM protein. We used MspA as a molecular ruler to define the boundaries of the OM of M. smegmatis by surface labeling of single cysteine mutants. Seventeen mutants covered the surface of the rim domain and were biotinylated with a membrane-impermeable reagent. The label efficiencies in vitro were remarkably similar to the predicted accessibilities of the cysteines. By contrast, six of these mutants were protected from biotinylation in M. smegmatis cells. Tryptophan 21 defines a horizontal plane that dissects the surface-exposed versus the membrane-protected residues of MspA. The 8 phenylalanines at position 99 form a ring at the periplasmic end of the hydrophobic beta-barrel domain. These results indicated that (i) the membrane boundaries of MspA are defined by aromatic girdles as in porins of Gram-negative bacteria and (ii) loops and a 3.4-nm long part of the hydrophilic rim domain are embedded into the OM of M. smegmatis. This is the first report suggesting that elements other than hydrophobic alpha-helices or beta-sheets are integrated into a lipid membrane.     

Rv1698 of Mycobacterium tuberculosis represents a new class of channel-forming outer membrane proteins

Mycobacteria contain an outer membrane composed of mycolic acids and a large variety of other lipids. Its protective function is an essential virulence factor of Mycobacterium tuberculosis. Only OmpA, which has numerous homologs in Gram-negative bacteria, is known to form channels in the outer membrane of M. tuberculosis so far. Rv1698 was predicted to be an outer membrane protein of unknown function. Expression of rv1698 restored the sensitivity to ampicillin and chloramphenicol of a Mycobacterium smegmatis mutant lacking the main porin MspA. Uptake experiments showed that Rv1698 partially complemented the permeability defect of the M. smegmatis porin mutant for glucose. These results indicated that Rv1698 provides an unspecific pore that can partially substitute for MspA. Lipid bilayer experiments demonstrated that purified Rv1698 is an integral membrane protein that indeed produces channels. The main single channel conductance is 4.5 +/- 0.3 nanosiemens in 1 M KCl. Zero current potential measurements revealed a weak preference for cations. Whole cell digestion of recombinant M. smegmatis with proteinase K showed that Rv1698 is surface-accessible. Taken together, these experiments demonstrated that Rv1698 is a channel protein that is likely involved in transport processes across the outer membrane of M. tuberculosis. Rv1698 has single homologs of unknown functions in Corynebacterineae and thus represents the first member of a new class of channel proteins specific for mycolic acid-containing outer membranes.     

Role of porins in iron uptake by Mycobacterium smegmatis

Many bacteria rely on siderophores to extract iron from the environment. However, acquisition of iron-loaded siderophores is dependent on high-affinity uptake systems that are not produced under high-iron conditions. The fact that bacteria are able to maintain iron homeostasis in the absence of siderophores indicates that alternative iron acquisition systems exist. It has been speculated that such low-affinity uptake of iron in Gram-negative bacteria includes diffusion of iron ions or chelates across the outer membrane through porins. The outer membrane of the saprophytic Mycobacterium smegmatis contains the Msp family of porins, which enable the diffusion of small and hydrophilic solutes, such as monosaccharides, amino acids, and phosphate. However, it is unknown how cations cross the outer membrane of mycobacteria. Here, we show that the Msp porins of M. smegmatis are involved in the acquisition of soluble iron under high-iron conditions. Uptake of ferric ions by a triple porin mutant was reduced compared to wild-type (wt) M. smegmatis. An intracellular iron reporter indicated that derepression of iron-responsive genes occurs at higher iron concentrations in the porin mutant. This was consistent with the finding that the porin mutant produced more siderophores under low-iron conditions than wt M. smegmatis. In contrast, uptake of the exochelin MS, the main siderophore of M. smegmatis, was not affected by the lack of porins, indicating that a specific outer membrane siderophore receptor exists. These results provide, to our knowledge, the first experimental evidence that general porins are indeed the outer membrane conduit of low-affinity iron acquisition systems in bacteria.     

Porins are required for uptake of phosphates by Mycobacterium smegmatis

Phosphorus is an essential nutrient, but how phosphates cross the mycobacterial cell wall is unknown. Phosphatase activity in whole cells of Mycobacterium smegmatis was significantly lower than that in lysed cells, indicating that access to the substrate was restricted. The loss of the outer membrane (OM) porin MspA also reduced the phosphatase activity in whole cells compared to that in lysed cells. A similar result was obtained for M. smegmatis that overexpressed endogenous alkaline phosphatase, indicating that PhoA is not a surface protein, contrary to a previous report. The uptake of phosphate by a mutant lacking the porins MspA and MspC was twofold lower than that by wild-type M. smegmatis. Strikingly, the loss of these porins resulted in a severe growth defect of M. smegmatis on low-phosphate plates. We concluded that the OM of M. smegmatis represents a permeability barrier for phosphates and that Msp porins are the only OM channels for the diffusion of phosphate in M. smegmatis. However, phosphate diffusion through Msp pores is rather inefficient as shown by the 10-fold lower permeability of M. smegmatis for phosphate compared to that for glucose. This is likely due to the negative charges in the constriction zone of Msp porins. The phosphatase activity in whole cells of Mycobacterium bovis BCG was significantly less than that in lysed cells, indicating a similar uptake pathway for phosphates in slow-growing mycobacteria. However, porins that could mediate the diffusion of phosphates across the OM of M. bovis BCG and Mycobacterium tuberculosis are unknown.     

The N-terminal domain of OmpATb is required for membrane translocation and pore-forming activity in mycobacteria

OmpATb is the prototype of a new family of porins in Mycobacterium tuberculosis and Mycobacterium bovis BCG. Although the pore-forming activity of this protein has been clearly established by using recombinant protein produced in Escherichia coli, characterization of the native porin has been hampered by the scarce amount of protein present in the M. tuberculosis detergent extracts. To this aim, we have developed a protocol to overproduce and obtain high yields of OmpATb in both Mycobacterium smegmatis and M. bovis BCG. The protein could be extracted and purified from the cell wall fraction and subsequently used for analysis of the pore-forming activity in multichannel and single-channel conductance experiments. Our results indicate that OmpATb produced in mycobacteria presents an average conductance value of 1,600+/-100 pS, slightly higher than that of OmpATb produced in E. coli, suggesting the occurrence of OmpATb in a highly ordered organization within the mycobacterial cell wall. In contrast to OmpATb, a truncated form lacking the first 72 amino acids (OmpATb73-326) was essentially found in the cytosol and was not active in planar lipid bilayers. This suggested that the N-terminal domain of OmpATb could participate in targeting of OmpATb to the cell wall. This was further confirmed by analyzing M. smegmatis clones expressing a chimeric protein consisting of a fusion between the N-terminal domain of OmpATb and the E. coli PhoA reporter. The present study shows for the first time that the N terminus of OmpATb is required for targeting the porin to the cell wall and also appears to be essential for its pore-forming activity.     

Characterization of a porin from Mycobacterium smegmatis.

A pore-forming protein with an Mr of 40,000 has been extracted from the cell wall of Mycobacterium smegmatis with buffer containing the detergent Zwittergent 3-12 and 0.5 M NaCl and purified on an anion-exchange column. Although the pore diameter was large (2 nm), the specific activity was much lower than those of nonspecific porin channels of enteric bacteria. The channel allowed the permeation of small hydrophilic molecules such as sugars and amino acids. Its N-terminal sequence did not show any similarity to those of other porins sequenced so far.     

MspA provides the main hydrophilic pathway through the cell wall of Mycobacterium smegmatis

MspA is an extremely stable, oligomeric porin from Mycobacterium smegmatis that forms water-filled channels in vitro. Immunogold electron microscopy and an enzyme-linked immunosorbent assay demonstrated that MspA is localized in the cell wall. An mspA deletion mutant did not synthesize detectable amounts of mspA mRNA, as revealed by amplification using mspA-specific primers and reverse-transcribed RNA. Detergent extracts of the DeltamspA mutant exhibited a significantly lower porin activity in lipid bilayer experiments and contained about fourfold less porin than extracts of wild-type M. smegmatis. The chromosome of M. smegmatis encodes three proteins very similar to MspA. Sequence analysis of the purified porin revealed that mspB or mspC or both genes are expressed in the DeltamspA mutant. The properties of this porin, such as single channel conductance, extreme stability against denaturation, molecular mass and composition of 20 kDa subunits, are identical to those of MspA. Deletion of mspA reduced the cell wall permeability towards cephaloridine and glucose nine- and fourfold respectively. These results show that MspA is the main general diffusion pathway for hydrophilic molecules in M. smegmatis and was only partially replaced by fewer porins in the cell wall of the DeltamspA mutant [corrected] This is the first experimental evidence that porins are the major determinants of the exceptionally low permeability of mycobacteria to hydrophilic molecules.     

The core of the tetrameric mycobacterial porin MspA is an extremely stable beta-sheet domain

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the cell wall and is the prototype of a new family of tetrameric porins with a single central pore of 10 nm in length. Infrared and circular dichroism spectroscopy revealed that MspA consists mainly of antiparallel beta-strands organized in a coherent domain. Heating to 92 and 112 degrees C was required to dissociate the MspA tetramer and to unfold the beta-sheet domain in the monomer, respectively. The stability of the MspA tetramer exceeded the remarkable stability of the porins of Gram-negative bacteria for every condition tested and was not reduced in the presence of 2% SDS and at any pH from 2 to 14. These results indicated that the interactions between the MspA subunits are different from those in the porins of Gram-negative bacteria and are discussed in the light of a channel-forming beta-barrel as a core structure of MspA. Surprisingly, the channel activity of MspA in 2% SDS and 7.6 m urea at 50 degrees C was reduced 13- and 30-fold, respectively, although the MspA tetramer and the beta-sheet domain were stable under those conditions. Channel closure by conformational changes of extracellular loops under those conditions is discussed to explain these observations. This study presents the first experimental evidence that outer membrane proteins not only from Gram-negative bacteria but also from mycobacteria are beta-sheet proteins and demonstrates that MspA constitutes the most stable transmembrane channel protein known so far. Thus, MspA may be of special interest for biotechnological applications.     

Decreased outer membrane permeability protects mycobacteria from killing by ubiquitin-derived peptides

Ubiquitin-derived peptides are bactericidal in vitro and contribute to the mycobactericidal activity of the lysosome. To further define interactions of ubiquitin-derived peptides with mycobacteria, we screened for mutants with increased resistance to the bactericidal activity of the synthetic ubiquitin-derived peptide Ub2. The four Ub2-resistant Mycobacterium smegmatis mutants were also resistant to the bactericidal action of other antimicrobial peptides and macrophages. Two mutants were in the mspA gene encoding the main M. smegmatis porin. Using a translocation-deficient MspA point mutant, we showed that susceptibility of M. smegmatis to Ub2 was independent of MspA channel activity. Instead, the M. smegmatis Ub2-resistant mutants shared a common phenotype of decreased cell wall permeability compared with wild-type bacteria. Expression of mspA rendered Mycobacterium tuberculosis CDC1551 more susceptible both to ubiquitin-derived peptides in vitro and to lysosomal killing in macrophages. Finally, biochemical assays designed to assess membrane integrity indicated that Ub2 treatment impairs membrane function of M. smegmatis and M. tuberculosis cells . The M. smegmatis Ub2-resistant mutants were more resistant than wild-type M. smegmatis to this damage. We conclude that Ub2 targets mycobacterial membranes and that reduced membrane permeability provides mycobacteria intrinsic resistance against antimicrobial compounds including bactericidal ubiquitin-derived peptides.     

Expression of the ompATb operon accelerates ammonia secretion and adaptation of Mycobacterium tuberculosis to acidic environments

Homeostasis of intracellular pH is a trait critical for survival of Mycobacterium tuberculosis in macrophages. However, mechanisms by which M. tuberculosis adapts to acidic environments are poorly understood. In this study, we analysed the physiological functions of OmpATb, a surface-accessible protein of M. tuberculosis. OmpATb did not complement the permeability defects of a Mycobacterium smegmatis porin mutant to glucose, serine and glycerol, in contrast to the porin MspA. Uptake rates of these solutes were unchanged in an ompATb operon mutant of M. tuberculosis indicating that OmpATb is not a general porin. Chemical analysis of low-pH culture filtrates showed that the proteins encoded by the ompATb operon are involved in generating a rapid ammonia burst, which neutralized medium pH and preceded exponential growth of M. tuberculosis. Addition of ammonia accelerated growth of the ompATb operon mutant demonstrating that ammonia secretion is indeed a mechanism by which M. tuberculosis neutralizes acidic environments. Infection experiments revealed that the ompATb operon was not required for full virulence in mice suggesting that M. tuberculosis has multiple mechanisms of resisting phagosomal acidification. Taken together, these results show that the ompATb operon is necessary for rapid ammonia secretion and adaptation of M. tuberculosis to acidic environments in vitro but not in mice.     

Selective extraction and purification of a mycobacterial outer membrane protein

MspA forms water-filled channels in the mycolic acid layer of Mycobacterium smegmatis thereby allowing the diffusion of hydrophilic solutes through this permeability barrier into the periplasm. MspA is the first member of a new family of porins and is extremely stable against chemical and thermal denaturation. We developed a purification procedure based on selective extraction of MspA with detergents from whole cells of M. smegmatis at high temperatures. Anion-exchange and size-exclusion chromatography yielded about 230 microg apparently pure and highly active MspA per liter of culture. This was a 20-fold increased yield compared to previous purification protocols. Similar amounts of pure MspA were obtained with the detergents isotridecylpolyethyleneglycolether, lauryldimethylamine oxide, and octylpolyethylene oxide indicating that this purification procedure is not restricted to a specific detergent. This study will promote the structural and functional analysis of MspA and might be valuable for the isolation of porins from other mycolic acid-containing bacteria.     

Importance of porins for biocide efficacy against Mycobacterium smegmatis

Mycobacteria are among the microorganisms least susceptible to biocides but cause devastating diseases, such as tuberculosis, and increasingly opportunistic infections. The exceptional resistance of mycobacteria to toxic solutes is due to an unusual outer membrane, which acts as an efficient permeability barrier, in synergy with other resistance mechanisms. Porins are channel-forming proteins in the outer membrane of mycobacteria. In this study we used the alamarBlue assay to show that the deletion of Msp porins in isogenic mutants increased the resistance of Mycobacterium smegmatis to isothiazolinones (methylchloroisothiazolinone [MCI]/methylisothiazolinone [MI] and octylisothiazolinone [2-n-octyl-4-isothiazolin-3-one; OIT]), formaldehyde-releasing biocides {hexahydrotriazine [1,3,5-tris (2-hydroxyethyl)-hexahydrotriazine; HHT] and methylenbisoxazolidine [N,N'-methylene-bis-5-(methyloxazolidine); MBO]}, and the lipophilic biocides polyhexamethylene biguanide and octenidine dihydrochloride 2- to 16-fold. Furthermore, the susceptibility of the porin triple mutant against a complex disinfectant was decreased 8-fold compared to wild-type (wt) M. smegmatis. Efficacy testing in the quantitative suspension test EN 14348 revealed 100-fold improved survival of the porin mutant in the presence of this biocide. These findings underline the importance of porins for the susceptibility of M. smegmatis to biocides.     

pH-dependent pore-forming activity of OmpATb from Mycobacterium tuberculosis and characterization of the channel by peptidic dissection

Mycobacteria are characterized by an unusual cell wall that controls nutrient and small hydrophilic compound permeability. Porin-like proteins are necessary to ensure the transport of molecules into the cell. Here, we investigated the pore-forming properties of OmpATb, a porin from Mycobacterium tuberculosis, in lipid bilayers. Multi-channel experiments showed an asymmetric behaviour with channel closures at negative critical voltages (Vc) and a strong decrease in Vc at acidic pH. Single-channel experiments gave conductance values of about 850 +/- 80 pS in 1 M KCl and displayed a weak cationic selectivity in 4-8 pH range. The production and characterization of a series of truncated OmpATb proteins, showed that the central domain (OmpATb73-220) was sufficient to induce the ion channel properties of the native protein in lipid bilayers, i.e. asymmetric insertion, pH-dependent voltage closure, cationic selectivity and similar conductance values in 1 M KCl. Western blot analysis suggests that the presence of OmpATb is only restricted to certain pathogenic species. Therefore, the propensity of channels of native OmpATb to close at low pH may represent an intrinsic property allowing pathogenic mycobacteria to adapt and survive to mildly acidic conditions, such as those encountered within the macrophage phagosome.     

MspA nanopores from subunit dimers

Mycobacterium smegmatis porin A (MspA) forms an octameric channel and represents the founding member of a new family of pore proteins. Control of subunit stoichiometry is important to tailor MspA for nanotechnological applications. In this study, two MspA monomers were connected by linkers ranging from 17 to 62 amino acids in length. The oligomeric pore proteins were purified from M. smegmatis and were shown to form functional channels in lipid bilayer experiments. These results indicated that the peptide linkers did not prohibit correct folding and localization of MspA. However, expression levels were reduced by 10-fold compared to wild-type MspA. MspA is ideal for nanopore sequencing due to its unique pore geometry and its robustness. To assess the usefulness of MspA made from dimeric subunits for DNA sequencing, we linked two M1-MspA monomers, whose constriction zones were modified to enable DNA translocation. Lipid bilayer experiments demonstrated that this construct also formed functional channels. Voltage gating of MspA pores made from M1 monomers and M1-M1 dimers was identical indicating similar structural and dynamic channel properties. Glucose uptake in M. smegmatis cells lacking porins was restored by expressing the dimeric mspA M1 gene indicating correct folding and localization of M1-M1 pores in their native membrane. Single-stranded DNA hairpins produced identical ionic current blockades in pores made from monomers and subunit dimers demonstrating that M1-M1 pores are suitable for DNA sequencing. This study provides the proof of principle that production of single-chain MspA pores in M. smegmatis is feasible and paves the way for generating MspA pores with altered stoichiometries. Subunit dimers enable better control of the chemical and physical properties of the constriction zone of MspA. This approach will be valuable both in understanding transport across the outer membrane in mycobacteria and in tailoring MspA for nanopore sequencing of DNA.     

Porin from bacterial and mitochondrial outer membranes

The outer membrane of gram-negative bacteria acts as a molecular filter with defined exclusion limit for hydrophilic substances. The exclusion limit is dependent on the type of bacteria and has for enteric bacteria like Escherichia coli and Salmonella typhimurium a value between 600 and 800 Daltons, whereas molecules with molecular weights up to 6000 can penetrate the outer membrane of Pseudomonas aeruginosa. The molecular sieving properties result from the presence of a class of major proteins called porins which form trimers of identical subunits in the outer membrane. The porin trimers most likely contain only one large but well-defined pore with a diameter between 1.2 and 2 nm. Mitochondria are presumably descendents of gram-negative bacteria. The outer membrane of mitochondria contains in agreement with this hypothesis large pores which are permeable for hydrophilic substances with molecular weights up to 6000. The mitochondrial porins are processed by the cell and have molecular weights around 30,000 Daltons. There exists some evidence that the pore is controlled by electric fields and metabolic processes.     

Structure of the Mycobacterium tuberculosis OmpATb protein: a model of an oligomeric channel in the mycobacterial cell wall

The pore-forming outer membrane protein OmpATb from Mycobacterium tuberculosis is a virulence factor required for acid resistance in host phagosomes. In this study, we determined the 3D structure of OmpATb by NMR in solution. We found that OmpATb is composed of two independent domains separated by a proline-rich hinge region. As expected, the high-resolution structure of the C-terminal domain (OmpATb(198-326)) revealed a module structurally related to other OmpA-like proteins from Gram-negative bacteria. The N-terminal domain of OmpATb (73-204), which is sufficient to form channels in planar lipid bilayers, exhibits a fold, which belongs to the α+β sandwich class fold. Its peculiarity is to be composed of two overlapping subdomains linked via a BON (Bacterial OsmY and Nodulation) domain initially identified in bacterial proteins predicted to interact with phospholipids. Although OmpATb(73-204) is highly water soluble, current-voltage measurements demonstrate that it is able to form conducting pores in model membranes. A HADDOCK modeling of the NMR data gathered on the major monomeric form and on the minor oligomeric populations of OmpATb(73-204) suggest that OmpATb(73-204) can form oligomeric rings able to insert into phospholipid membrane, similar to related proteins from the Type III secretion systems, which form multisubunits membrane-associated rings at the basal body of the secretion machinery.     

Breaking down the wall: fractionation of mycobacteria

Mycobacterium spp. possess a complex cell envelope that consists of a plasma membrane, a peptidoglycan-arabinogalactan complex which in turn is esterified by mycolic acids that form with other non-bound lipids an asymmetric permeability barrier and an outer layer, also called a capsule in the case of pathogenic species. In order to investigate the functional roles of the cell envelope components, especially those of the major pathogens Mycobacterium tuberculosis and Mycobacterium leprae, it is necessary to fractionate the envelope by breaking the unusual wall that covers these bacteria. To this aim we first compared the efficiency of high pressure (cell disrupter/French press) with those of pathogen-compatible breakage methods such as sonication, bead beater and lysozyme treatment using the non-pathogenic Mycobacterium smegmatis. When the distribution of various specific markers of the cell envelope compartments, which include mycolic acids, arabinose, NADH oxidase activity, cell wall and cytosolic proteins, were determined sonication combined with lysozyme treatment was found to be the best option. The protocol of subcellular fractionation was then validated for pathogenic species by applying the method to Mycobacterium bovis BCG cells, an attenuated strain of the M. tuberculosis complex.