Enzymatic synthesis of a conducting complex of polyaniline and poly(2-arcylamido-2-methyl-1-propanesulfonic ACID) using palm tree peroxidase and its properties

An enzymatic method of producing a conducting polyelectrolyte complex of polyaniline (PANI) and poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was developed. Acidic stable peroxidase isolated from royal palm tree (Roystonea regia L.) leaves was used as a catalyst in the oxidative polymerization of aniline at pH 2.8. The synthesis procedure was optimized. Spectroscopic and electrochemical characteristics of nanoparticles of obtained PANI/PAMPS complexes at different pH were studied. It was shown that the acidity of the medium affects their properties.     

Synthesis of conducting polyelectrolyte complexes of polyaniline and poly(2-acrylamido-3-methyl-1-propanesulfonic acid) catalyzed by pH-stable palm tree peroxidase

Comparison of the stability of five plant peroxidases (horseradish, royal palm tree leaf, soybean, and cationic and anionic peanut peroxidases) was carried out under acidic conditions favorable for synthesis of polyelectrolyte complexes of polyaniline (PANI). It demonstrates that palm tree peroxidase has the highest stability. Using this peroxidase as a catalyst, the enzymatic synthesis of polyelectrolyte complexes of PANI and poly(2-acrylamido-3-methyl-1-propanesulfonic acid) (PAMPS) was developed. The template polymerization of aniline was carried out in aqueous buffer at pH 2.8. Varying the concentrations of aniline, PAMPS, and hydrogen peroxide as reagents, favorable conditions for production of PANI were determined. UV-vis-NIR absorption and EPR demonstrated that PAMPS and PANI formed the electroactive complex similar to PANI doped traditionally using low molecular weight sulfonic acids. The effect of pH on conformational variability of the complex was evaluated by UV-vis spectroscopy. Atomic force microscopy showed that a size of the particles of the PANI-PAMPS complexes varied between 10 and 25 nm, depending on a concentration of PAMPS in the complex. The dc conductivity of the complexes depends also on the content of PAMPS, the higher conductivity being for the complexes containing the lower content of the polymeric template.     

Quasielastic light scattering,electrophoresis, and fluorescence studies of lysozyme-poly(2-acrylamido-methylpropylsulfate) complexes

Complexation between lysozyme and sodium poly(2-acrylamido-2-methylpropanesulfonate) (PAMPS) was studied by quasielastic light scattering, electrophoretic light scattering, fluorescence, and turbidimetry in electrolyte solution. These techniques show that complexation occurs at pH 9.6 in an ionic strength buffer of 0.25M NaCl + 25 mM Na₂B₄O₇. At constant lysozyme concentration (C_pro). The structure of the complex depends on the polymer concentration. At low polymer concentration (relative to C_pro), an intrapolymer complex is formed. This intrapolymer complex aggregates to an interpolymer species upon increase in polymer concentration. Complex formation was also studied by fluorescence using pyrene-labeled PAMPS (Py-PAMPS). Energy transfer from singlet-excited tryptophan residues in lysozyme to the pyrene label occurs when the complex is formed. Fluorescence and turbidity data indicate that lysozyme interacts with Py-PAMPS preferentially at pyrene sites, which leads to static quenching of tryptophan fluorescence via energy transfer to the pyrene label. © 1995 John Wiley & Sons, Inc.     

Synthesis of electroconductive polyaniline using immobilized laccase

A new method for synthesis of the conductive complex between polyaniline (PANI) and poly(2-acrylamido-2-methyl-1-propanosulfonic acid) (PAMPS) was proposed; in this method, the immobilized laccase from the basidiomycete Trametes hirsuta is used as a biocatalyst for aniline oxidative polymerization. The conditions for laccase immobilization on CM cellulose by bifunctional Woodward’s reagent were optimized. The catalytic properties of immobilized and native laccases were compared. The immobilized laccase appeared an efficient catalyst for the oxidative radical polymerization of aniline on polysulfonic acid matrix at 4°C. It was demonstrated that the immobilized enzyme could be repeatedly used for enzymatic synthesis of this polymer. Several spectral characteristics of the PANI/PAMPS complexes synthesized at various pH values were studied. The conductance of PANI specimens produced using immobilized laccase as a catalyst was 13 mS/cm.     

Polyaniline grafted polyacylonitrile conductive composite fibers for reversible immobilization of enzymes: Stability and catalytic properties of invertase

Polyacylonitrile fibers (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The effect of aniline concentration on the grafting efficiency and on the electrical surface resistance of PAN/PANI composite fibers was investigated. The surface resistance of the conductive composite fibers in this work was found to be between 8.0 and 0.5 kΩ/cm. As the amount of grafted PANI increased on the PAN fibers the electrical resistance of composite fibers decreased. The PAN/PANI composite fibers were characterized by SEM and FTIR studies. Composite PAN/PANI fibers were used for reversible immobilization of invertase. The immobilization efficiency and the activity of the immobilized invertase (from 1.0 mg/mL invertase solution at pH 5.5) were increased with increasing PANI contents of the composite fibers. The maximum amount of immobilized enzyme onto composite fibers containing 2.0% PANI was about 76.6 mg/g. The optimum pH for the free enzyme was observed at 5.0. On the other hand, immobilized invertase yielded a broad optimum pH profile between pH 5.0 and 7.0. Immobilized invertase exhibited 83% of its original activity even after two months storage at 4 °C while the free enzyme showed only 7% of its initial activity.     

Polyphenol biosensor based on laccase immobilized onto silver nanoparticles/multiwalled carbon nanotube/polyaniline gold electrode

Laccase purified from Ganoderma sp. was immobilized covalently onto electrochemically deposited silver nanoparticles (AgNPs)/carboxylated multiwalled carbon nanotubes (cMWCNT)/polyaniline (PANI) layer on the surface of gold (Au) electrode. A polyphenol biosensor was fabricated using this enzyme electrode (laccase/AgNPs/cMWCNT/PANI/Au electrode) as the working electrode, Ag/AgCl as the reference electrode, and platinum (Pt) wire as the auxiliary electrode connected through a potentiostat. The biosensor showed optimal response at pH 5.5 (0.1 M acetate buffer) and 35 °C when operated at a scan rate of 50 mV s⁻¹. Linear range, response time, and detection limit were 0.1–500 μM, 6 s, and 0.1 μM, respectively. The sensor was employed for the determination of total phenolic content in tea, alcoholic beverages, and pharmaceutical formulations. The enzyme electrode was used 200 times over a period of 4 months when stored at 4 °C. The biosensor has an advantage over earlier enzyme sensors in that it has no leakage of enzyme during reuse and is unaffected by the external environment due to the protective PANI microenvironment.     

Reversible immobilization of uricase on conductive polyaniline brushes grafted on polyacrylonitrile film

Polyacrylonitrile film (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The conductive films were used for immobilization of uricase. The surface resistance of the conductive film in this work was found to be 0.97 kΩ/cm. The maximum amount of immobilized enzyme on conductive film containing 2.4% PANI was about 216 μg/cm². The optimum pH for free and immobilized enzymes was observed at 7.0 and 7.5, respectively. The K _m values for free and immobilized uricase were found to be 94 and 138 μM, respectively. V _max values were calculated as 1.87 and 1.63 U/mg protein for the free and immobilized enzymes, respectively. Immobilized uricase exhibited ~68% of its original activity even after 2 months of storage at 4 °C while the free enzyme lost its initial activity within 4 weeks.     

Electrophoretic transfer protein zymography

A mixture of commercial creatinine amidohydrolase (CA), creatine amidinohydrolase (CI), and sarcosine oxidase (SO) was coimmobilized covalently via N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry onto carboxylated multiwalled carbon nanotube (c-MWCNT)/polyaniline (PANI) nanocomposite film electrodeposited over the surface of a platinum (Pt) electrode. A creatinine biosensor was fabricated using enzyme/c-MWCNT/PANI/Pt as working electrode, Ag/AgCl as reference electrode, and Pt wire as auxiliary electrode connected through potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and electrochemical impedance spectroscopy (EIS). The biosensor detected creatinine levels as low as 0.1 μM, estimated at a signal-to-noise ratio of 3, within 5 s at pH 7.5 and 35 °C. The optimized biosensor showed a linear response range of 10 to 750 μM creatinine with sensitivity of 40 μA/mM/cm². The fabricated biosensor was successfully employed for determination of creatinine in human serum. The biosensor showed only 15% loss in its initial response after 180 days when stored at 4 °C.     

Mycotoxin detection on antibody-immobilized conducting polymer-supported electrochemically polymerized acacia gum

Electrochemical polymerization of acacia gum (AG) was initiated by electroactive polyaniline (PANI) monomers by radical cation formation and their coupling reactions with AG molecules. R_CT values obtained from electrochemical impedance spectroscopy analysis at various AG concentrations with PANI were drastically decreased, confirming formation of conducting AG complexes with PANI. Quantitative analysis of ochratoxin-A (OTA) detection in electrolyte was carried out on rabbit antibody-immobilized PANI and PANI–AG matrices. The observed sensitivities of 50, 150, and 250 mg AG-added PANI matrix-based platforms were 3.3 ± 0.5, 10.0 ± 0.5, and 12.7 ± 0.5 μA/ng/ml, respectively. The sensitivity of only PANI electrodes was 2.6 ± 0.3 μA/ng/ml, which was relatively lower than AG-added PANI. This increase was due to the presence of glycan functional groups in AG molecules that supported the retention of activity of antibodies. In addition, enhanced electron transportation at AG–PANI film surface was observed due to formation of an electroactive polymer film of two different electroactive functions to contribute toward enhancement in the detection sensitivity.     

Reduction of Cr(VI) by a Bacillus sp.

A Bacillus sp. RE was resistant to chromium and reduced Cr(VI) without accumulating chromium inside the cell. When Cr(VI) was 10 and 40 μg ml⁻¹, >95% of the total Cr(VI) was reduced in 24 and 72 h of growth, respectively, whereas at 80 μg Cr(VI) ml⁻¹ only 50% of Cr(VI) was reduced. However growth was not affected; the cell mass was 0.7–0.8 mg ml⁻¹ in all cases. The cell-free extract showed Cr(VI) reducing enzyme activity which was enhanced (>5 fold) by NADH and NADPH. Like whole cells the enzyme also reduced Cr(VI) with decreasing efficiency on increasing Cr(VI) concentration. The enzyme activity was optimal at pH 6.0 and 30 °C. The enzyme was stable up to 30 °C and from pH 5.5 to 8, but from pH 4 to 5 the enzyme was severely destabilized. Its K_m and V_max were 14 μm and 3.8 nmol min⁻¹ mg⁻¹ respectively. The enzyme activity was enhanced by Cu²⁺ and Ni²⁺ and inhibited by Hg²⁺. Received 21 September 2005; Revisions requested 5 October 2005; Revisions received 16 November 2005; Accepted 16 November 2005     

Effect of culture medium composition on the activity of extracellular lectins of <Emphasis Type="Italic">Lentinus edodes</Emphasis>

The time course of lectin production in culture liquid of the basidial fungus Lentinus edodes strain F-249 in different media under submerged culture conditions was studied. The activity of agglutinins depended on the ratio between carbon and nitrogen sources and the pH of the culture medium. The lectin activity in culture medium was maximal when the fungus was grown in a medium containing L-arabinose as a source of carbon and L-asparagine as a source of nitrogen (C:N ratio, (9.5–12):1) on day 15–18 of culturing at pH 8.0–9.0.Translated from Prikladnaya Biokhimiya i Mikrobiologiya, Vol. 41, No. 2, 2005, pp. 200–203.Original Russian Text Copyright © 2005 by Tsivileva, Nikitina, Garibova.     

2-Hydroxyacid dehydrogenase from Haloferax mediterranei, a D-isomer-specific member of the 2-hydroxyacid dehydrogenase family

An NAD-dependent D-2-hydroxyacid dehydrogenase (EC 1.1.1.) was isolated and characterized from the halophilic Archaeon Haloferax mediterranei. The enzyme is a dimer with a molecular mass of 101.4 ± 3.3 kDa. It is strictly NAD-dependent and exhibits its highest activity in 4 M NaCl. The enzyme is characterized by a broad substrate specificity 2-ketoisocaproate and 2-ketobutyrate being the substrates with the higher V_max/K_m. When pyruvate and 2-ketobutyrate were the substrates the optimal pH was acidic (pH 5) meanwhile for 2-ketoisocaproate maximum activity was achieved at basic pH between 7.5 and 8.5. The optimum temperature was 52 ºC and at 65 ºC there was a pronounced activity decrease. This new enzyme can be used for the production of D-2-hydroxycarboxylic acid.     

The production-influencing factors of extracellular polysaccharide (EPS) from a strain of lactic acid bacteria and EPS extraction

The influencing factors of extracellular polysaccharide (EPS) produced from a strain of lactic acid bacteria (LAB L15) were studied by using the phenol-H₂SO₄ method. It was demonstrated that the strain produced EPS at the most amount when it was incubated for 40–48 h and when the pH value was 4 under 30°C. Glucose was the most suitable carbon source for LAB-producing EPS. The rough EPS was obtained from L15 culture after centrifugation, dialysis, deprotein, decoloration, and ethanol-precipitation. The sample was at least composed of two polysaccharides that were completely different in molecular weight and the amount. The purified EPS was passed through the SephadexG-200 column and it showed that it was a sample purified by thin layer chromatography. __________ Translated from Microbiology, 2005, 32(4): 85–90 [译自: 微生物学通报, 2005, 32(4): 85–90]     

Biodegradation of p-nitrophenol by methyl parathion-degrading Ochrobactrum sp. B2

Ochrobactrum sp. B2, a methyl parathion-degrading bacterium, was proved to be capable of using p-nitrophenol (PNP) as carbon and energy source. The effect of factors, such as temperature, pH value, and nutrition, on the growth of Ochrobactrum sp. B2 and its ability to degrade p-nitrophenol (PNP) at a higher concentration (100 mg l⁻¹) was investigated in this study.The greatest growth of B2 was observed at a temperature of 30 °C and alkaline pH (pH 9–10). pH condition was proved to be a crucial factor affecting PNP degradation. Enhanced growth of B2 or PNP degradation was consistent with the increase of pH in the minimal medium, and acidic pH (6.0) did not support PNP degradation. Addition of glucose (0.05%, 0.1%) decreased the rate of PNP degradation even if increased cell growth occurred. Addition of supplemental inorganic nitrogen (ammonium chloride or ammonium sulphate) inhibited PNP degradation, whereas organic nitrogen (peptone, yeast extract, urea) accelerated degradation.     

Response of microcosm zooplankton to acidification

Zooplankton community transformation in response to soft water acidification was studied in two experimental series using the microcosm method. The dynamics of total abundance, changes in the proportions of the main zooplankton groups, stability of the dominant complex, and species diversity were evaluated. Zooplankton population proved to decrease at all studied low pH (5–6, 4–5, and 3–4) within the first two weeks relative to the control. At water pH 5–6, either Rotifera-Copepoda or Cladocera-Copepoda zooplankton complex was established depending on the initial community composition; while at pH 4–5, Copepoda predominated in the established zooplankton community. The community edificator species was replaced at pH 4–5. The lowest diversity index was also observed at this pH (1.0–1.5 bit/ind.). In addition, the proportion and absolute population of copepod nauplii and cladoceran Scapholeberis mucronata increased at low pH. A decrease in water pH to 3–4 proved to be disruptive for the zooplankton community.Translated from Izvestiya Akademii Nauk, Seriya Biologicheskaya, No. 1, 2005, pp. 100–108.Original Russian Text Copyright © 2005 by Kurbatova.     

H2 production from chemostat fermentation of glucose byClostridium butyricum andClostridium pasteurianum in ammonium- and phosphate limitation

Summary In ammonium-limitation (4.55 mM NH₄ ⁺) at a dilution rate (D)=0.081 h^–1,Clostridium butyricum produced 2 mol H₂ per mol glucose consumed at pH 5.0, but at a low fermentation rate. At higher pH, important amounts of extracellular protein were produced. Phosphatelimitation (0.5 mM PO₄ ^–3) at D=0.061 h^–1 and pH 7.0 were the best conditions tested for hydrogen gas production (2.22 mol H₂ per mol glucose consumed) at a high fermentation rate. Steady-state growth at lower pH and with 0.1 mM PO₄ ^–3 resulted in proportional higher glucose incorporation into biomass and lower H₂ production. C. pasteurianum in NH₄ ⁺ limitation showed higher fermentation rates thanC. butyricum and a stabilized H₂ production around 2.08 (±0.06) mol per mol glucose consumed at various defined pH conditions, although the acetate/butyrate ratio increased to 1 at pH 7.0. The latter was also observed in phosphate-limitation, but here H₂ production was maximal (1.90 mol. per mol glucose consumed) at the lowest pH (5.5) tested.     

Activity of plasma membrane H+-ATPase and expression of PMA1 and PMA2 genes in Saccharomyces cerevisiae cells grown at optimal and low pH

Cells of Saccharomyces cerevisiae grown in media with an initial pH of 2.5–6.0, acidified with a strong acid (HCl), exhibited the highest plasma membrane H⁺-ATPase-specific activity at an initial pH of 6.0. At a lower pH (above pH 2.5) ATPase activity (62–83% of the maximum level) still allowed optimal growth. At pH 2.5, ATPase activity was about 30% of the maximum value and growth was impaired. Quantitative immunoassays showed that the content of ATPase protein in the plasma membrane was similar across the entire pH range tested, although slightly lower at pH 2.5. The decrease of plasma membrane ATPase activity in cells grown at low pH was partially accounted for by its in vitro stability, which decreased sharply at pH below 5.5, although the reduction of activity was far below the values expected from in vitro measurements. Yeast growth under acid stress changed the pattern of gene expression observed at optimal pH. The level of mRNA from the essential plasma-membrane-ATPase-encoding gene PMA1 was reduced by 50% in cells grown at pH 2.5 as compared with cells grown at the optimal pH 5.0, although the content of ATPase in the plasma membrane was only modestly reduced. As observed in response to other kinds of stress, the PMA2 promoter at the optimal pH was up to eightfold more efficient in cells grown at pH 2.5, although it remained several hundred times less efficient than that of the PMA1 gene. Received: 22 April 1996 / Accepted: 6 August 1996     

Fabrication and characterization of non-enzymatic glucose sensor based on ternary NiO/CuO/polyaniline nanocomposite

Novel nickel and copper oxide nanoparticle modified polyaniline (PANI) nanofibers (NiO/CuO/PANI) were fabricated and used as a non-enzymatic sensor for detecting glucose. PANI nanofibers were prepared through electrodeposition, whereas nickel and copper oxide nanoparticles were deposited on PANI nanofibers by electrodeposition and electrochemical oxidation in situ. The morphology and structure of NiO/CuO/PANI nanocomposites were characterized by field emission scanning electron microscopy (FE–SEM), X-ray diffraction (XRD), Raman spectroscopy, and Fourier transform infrared (FT–IR). The as-prepared NiO/CuO/PANI electrode was employed for non-enzymatic glucose detection in alkaline electrolyte and showed better electrocatalytic activity compared with the PANI, CuO/PANI, and NiO/PANI electrodes. Consequently, an amperometric electrode of glucose was achieved under 0.6 V versus Ag/AgCl with a wide linear range from 20 to 2500 μM (R² = 0.9978) and a low detection limit of 2.0 μM (signal/noise [S/N] = 3). This electrode can effectively analyze glucose concentration in human serum samples, avoiding interference, and is a promising non-enzymatic glucose sensor due to its low overpotential, high sensitivity, good selectivity and stability, fast response, and low cost.     

Hydrogen production of a salt tolerant strain Bacillus sp. B2 from marine intertidal sludge

To isolate a salt tolerant hydrogen-producing bacterium, we used the sludge from the intertidal zone of a bathing beach in Tianjin as inoculum to enrich hydrogen-producing bacteria. The sludge was treated by heat-shock pretreatment with three different temperature (80, 100 and 121°C) respectively. A hydrogen-producing bacterium was isolated from the sludge pretreated at 80°C by sandwich plate technique and identified using microscopic examination and 16S rDNA gene sequence analysis. The isolated bacterium was named as Bacillus sp. B2. The present study examined the hydrogen-producing ability of Bacillus sp. B2. The strain was able to produce hydrogen over a wide range of initial pH from 5.0 to 10.0, with an optimum at pH 7.0. The level of hydrogen production was also affected by the salt concentration. Strain B2 has unique capability to adapt high salt concentration. It could produce hydrogen at the salt concentration from 4 to 60‰. The maximum of hydrogen-producing yield of strain B2 was 1.65 ± 0.04 mol H₂/mol glucose (mean ± SE) at an initial pH value of 7.0 in marine culture conditions. Hydrogen production under fresh culture conditions reached a higher level than that in marine ones. As a result, it is likely that Bacillus sp. B2 could be applied to biohydrogen production using both marine and fresh organic waste.     

Effect of temperature and photoperiod on efficiency of assimilated CO<Subscript>2</Subscript> conversion into the biomass of <Emphasis Type="Italic">Cucumis sativus</Emphasis>

The coefficient of effectiveness (K _e) of assimilated CO₂ conversion into dry matter of cucumber (Cucumis sativus L.) plants at the stage of four leaves as dependent on a photoperiod (8, 12, and 16 h) at an irradiance of 220 W/m² at the upper leaf level and the combinations of day and night temperatures: typical temperature of plant habitat (background temperature) of 25°C and heat- and cold-hardening temperatures (35 and 15°C, respectively) was determined in the multifactorial designed experiment. K _e reduced insignificantly at shortening of a photoperiod and greater at its lengthening. At background temperatures, K _e corresponded mainly to that of carbohydrate synthesis while the presence of cold-hardening temperatures in the thermoperiod increased K _e and heat-hardening temperature reduced it.Translated from Fiziologiya Rastenii, Vol. 52, No. 2, 2005, pp. 203–208.Original Russian Text Copyright © 2005 by Talanov, Popov, Kurets, Drozdov.This revised version was published online in April 2005 with a corrected cover date.