Genetic transformation of Chainia and heat attenuation of its restriction system.

A PEG-mediated transformation system for Chainia (NCL 82-5-1) was developed using a broad host range Streptomyces vector, pIJ702. Protoplasts prepared from Chainia (NCL 82-5-1) were regenerated with 5% efficiency. Transformation of the protoplasts with pIJ702 gave 10-20 transformants/micrograms DNA. The low efficiency of transformation is attributed to a restriction system in Chainia; this could be inhibited by treating the protoplasts at 42 degrees C for 10 min just before transformation. The yield of transformants increased 100-fold when pIJ702 was modified by passage in Chainia. Because the plasmid replicon was functional in Chainia and the modified plasmid was stably maintained, the transformation system should be useful for self-cloning in Chainia NCL 82-5-1 of the many commercially important enzymes this strain is known to produce.     

Efficient transformation ofMicromonospora melanosporea protoplasts byStreptomyces plasmid

An efficient and relatively simple procedure forMicromonospora melanosporea protoplast preparation and transformation is described. Transformation ofM. melanosporea protoplast by theStreptomyces plasmid pIJ702 was optimized by altering parameters affecting the formation, regeneration, and transformation of protoplasts. Improvement of regeneration medium resulted in relatively quick growth of transformants (only 7 days). As a result of these experiments we describe a new transformation method that has routinely yielded 10⁶ transformants/µg plasmid DNA.     

Inhibition of restriction in Streptomyces clavuligerus by heat treatment

Inefficient transformation of Streptomyces clavuligerus protoplasts by DNA from the plasmid pIJ702, isolated from S. lividans, was attributed to restriction in view of the observation that efficient transformation was observed using modified pIJ702 (isolated from S. clavuligerus). The restriction system could be partially inhibited by treating protoplasts at 45 degrees C prior to transformation. This treatment increased the transformation frequencies of pIJ702 DNA by 100-fold and was used to introduce other plasmids into S. clavuligerus.     

Electrotransformation of germinating spores of Streptomyces spp.

Summary Germinating spores of Streptomyces lividans, S. aureofaciens, S. rimosus and S. virginiae were electrotransformed with pIJ699, pIJ702, pWOR109 and pZAT22 plasmid DNAs. In all cases, thiostrepton resistant transformants were obtained with an efficiency of 1 × 10² to 5 × 10³ per g of plasmid DNA.     

Factors affecting transient gene expression in electroporated black spruce (Picea mariana) and jack pine (Pinus banksiana) protoplasts

Summary Methods were developed for transient gene expression in protoplasts of black spruce (Picea mariana) and jack pine (Pinus banksiana). Protoplasts were isolated from embryogenic suspension cultures of black spruce and from non-embryogenic suspensions of jack pine. Using electroporation, transient expression of the chloramphenicol acetyltransferase (CAT) gene was assayed and shown to be affected by the cell line used, by voltage, temperature, and by the plasmid concentration and conformation. Increasing the plasmid DNA concentration (0–150g ml^–1) resulted in higher levels of transient CAT expression. In jack pine, linearized plasmid gave 2.5 times higher levels of CAT enzyme activity than circular. Optimal voltage varied for each cell line of the two species within the range 200–350 V cm^–1 (960 F). A heat shock treatment of protoplasts for 5 min at 45 °C resulted in enhanced CAT gene expression for both species.NRCC No. 30491     

Transfection of protoplasts from Streptomyces lividans 66 with actinophage SH10 DNA

Summary The slightly modified procedure for the transformation of protoplasts of S. coelicolor A3 (2) with SCP2 plasmid DNA and polyethylenglycol (PEG) (Bibb et al., 1978) was extented to infection of protoplasts of S. lividans 66 with actinophage SH10 DNA (Klaus et al., 1979).Maximal yield of transfected protoplasts was obtained at 20% PEG, 3 mM sodium-citrate and 150 mM NaCl final concentrations. The efficiency of transfection was determined to be about 2×10^-8 to 2×10^-7. The average value of competent protoplasts was about 1–2×10^-4 of regenerating protoplasts.In comparison with outgrowing spores infected with phage particles the average burst size of transfected protoplasts was reduced from 100 to 10 pfu/infected cell, the latent period prolonged from 45 min to 120 min and the rise period was not affected.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction.

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

Transfection and transformation of protoplasts of the thermophilic actinomycete Faenia rectivirgula

Summary A procedure for the formation and handling of protoplasts of Faenia rectivirgula is described. Transfection with several phage DNAs demonstrated the high DNA uptake capacity of these protoplasts. The regeneration rate (0.1%) and the transformation rate (18 transformants in several experiments with the Streptomyces plasmid vectors pIJ702 and pWOR120) were low although Faenia turned out to have no considerable restriction barriers for foreign DNA. The two Streptomyces plasmids proved to be unsuitable for Faenia as they are extremely unstable in this host.     

Transfer of hygromycin resistance into Brassica napus using total DNA of a transgenic B. nigra line

The successful transfer of a marker gene (hpt gene) from Brassica nigra into B. napus via direct gene transfer was demonstrated. Total DNA was isolated from a hygromycin-resistant callus line, which contained three to five copies of the hpt gene. This line had been produced via direct gene transfer with the hygromycin resistance-conferring plasmid pGL2. The treatment of B. napus protoplasts with genomic DNA of B. nigra (Hyg^R) resulted in relative transformation frequencies of 0.1–0.4%. Similar transformation rates were obtained in direct gene transfer experiments using B. napus protoplasts and plasmid pGL2.     

Protoplasts of lincomycin producer Streptomyces roseolus in genetic manipulations]

Protoplasts of commercial strain No. 1 of Streptomyces roseolus producing lincomycin were prepared. Conditions for protoplast storage and regeneration were defined. The protoplasts of strain No. 1 mutants marked by the rifampicin and thiostrepton resistance and the ability to synthesize melanin pigments were fused. Genetic analysis of the recombinants was performed. Systems for transformation of S. roseolus protoplasts by plasmid DNAs were developed. Efficiency of transformation by pIJ702, pIJ61, pVG101 and pBG3 and stability of the transformants were shown.     

Grape skins as a natural support for yeast immobilization

Grape skins were used to immobilize Saccharomyces cerevisiae. In repeated batch fermentations of grape by immobilized and free cells, the maximum specific rate of alcohol production on glucose decreased from 7.98 h^–1 at 25 °C to 0.7 h^–1 at 5 °C. The rate was approximately twice as high as that on fructose. The rates for free cells were very low. The maximum alcohol yield (0.45 g g^–1) was obtained at 5 °C when the immobilized biocatalyst was used.     

Cotransformation of lactococcin-producing, 2.0-mega dalton and erythromycin-resistant pGB 301 plasmids toLactococcus lactis subsp.lactis protoplast

Protoplasts of plasmid-freeLactococcus lactis subsp.lactis LM 0230 and PC₄ strains were cotransformed successfully with the plasmid pools ofL. lactis subsp.lactis 484, a lactosefermenting (Lac⁺), lactococcin-producing (Lap⁺), lactococcin-resistant (Lap^r), sucrosefermenting (Suc⁺) wild strain, its derivatives, and pGB 301 erythromycin resistance plasmid (Ery^r) at the frequencies of 10⁴ transformants/g of DNA. PC₄ protoplasts were transformed at slightly lower frequencies that LM 0230 protoplasts when the same plasmid combinations were used for transformation. Agarose gel electrophoresis of plasmids from three groups of transformants, namely, Lac^–Lap^–Ery^r, Lac⁺Suc⁺Lap⁺Lap^rEry^r, and Lac^–Suc⁺Lap⁺ Lap^rLap^r, confirmed that 2.0 and 65.0 megadalton (MDa) plasmids carried genes for Suc⁺Lap⁺Lap^r and Lac⁺ phenotypes respectively. The protoplasts could be transformed with low-molecular-weight 2.0 MDa Lap plasmid at a relatively higher frequency than those with high-molecular-weight 65.0 MDa Lac plasmid. All the transformants resembled parent culture 484 in terms of lactic acid production (0.810–0.840%), milk curdling time (6 h), and lactococcin activity (7–12 mm, zone of inhibition) againstListeria monocytogenes, Salmonella typhi, andStaphylococcus aureus. The plasmids and their respective phenotypes in PC₄ transformants were genetically more stable than those of LM 0230 protoplasts. The marker plasmid pGB 301 disappeared more frequently from the transformants when present in association with the lowmolecular-weight, high-copy-number 2.0 MDa plasmid, thereby suggesting the incompatibility of these two plasmids.     

Plasmid transformation of Streptomyces venezuelae: modified procedures used to introduce the gene(s) for p-aminobenzoate synthase

Sucrose was unsuitable as an osmotic stabilizer in buffer solutions and media used for transformation of Streptomyces venezuelae ISP5230. Its replacement with NaCl, together with other modifications in the procedure, allowed efficient formation and regeneration of protoplasts but did not support transformation of S. venezuelae ISP5230 by vectors pIJ41 and pIJ941. With pIJ702, transformants with a low plasmid-copy-number and altered growth characteristics were obtained. Both pIJ702 and pIJ941, but not pIJ41, transformed S. venezuelae 13s; when pIJ941 was used, the plasmid in 18 of 20 transformants contained a deletion in the region reported to code for replication and transfer. The modified plasmid transformed S. venezuelae ISP5230 efficiently and was used to introduce a fragment of DNA from the pab locus of the wild-type into a Cml-1 mutant of ISP5230 blocked in chloramphenicol formation. Transformants that overproduced p-aminobenzoic acid were obtained but they remained blocked in chloramphenicol production; thus, the cloned pab fragment did not contain genes able to complement the cml-1 mutation. The results also suggest that the Cml-1 phenotype is not due to a defective reaction common to the biosynthesis of p-aminobenzoic acid and chloramphenicol.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

Improved conditions for protoplast formation and transformation of Pleurotus ostreatus

Conditions suitable for the production and regeneration of Pleurotus ostreatus protoplasts from dikaryotic mycelia were examined. Three commercially available muralytic enzymes, including Sigma lysing enzyme, Novozym 234 and Novozym 234 LP, were used for production of protoplasts. Over 2 × 10⁷ protoplasts per gram fresh weight mycelia were obtained within 1.5 h by using each of these three enzymes. The colony regeneration rate was up to 13% on potato-dextrose-agar medium containing 0.8 m mannitol. Genetic transformation was based on positive selection for resistance to hygromycin B (HmB) using the plasmid vector pAN7-1 and accomplished by either electroporation or a polyethylene glycol (PEG)-divalent cation method. P. ostreatus strains used in this study have innate sensitivity to HmB at a critical inhibitory concentration of between 40–50 g/ml. Selection for HmB resistance of this fungus, indicative of transformation, resulted in 3–48 HmB-resistant colonies per microgram of pAN7-1 per 10⁷ viable protoplasts. No significant differences were apparent when either transformation protocol or either P. ostreatus strain was used. The best electrical condition found for the electrotransformation of P. ostreatus is at a field strength of 2.6–2.8 kV/cm with a capacitance of 25F and a parallel resistance of 800 ohms, corresponding to a time constant range of 10–14 ms. Correspondence to: P. A. Lemke     

An efficient protocol for plant regeneration from protoplasts of the moss <Emphasis Type="Italic">Atrichum undulatum P. Beauv in vitro</Emphasis>

A system for plant regeneration from protoplasts of the moss, Atrichum undulatum (Hedw.) P. Beauv. in vitro, is first reported. Viable protoplasts were isolated at about 9 × 10⁵ protoplasts g⁻¹ fresh weight from 10 to 18 days protonemata. For regeneration of protoplasts, viable protoplasts were cultured in liquid–solid medium containing surface liquid medium MS (0.4 M mannitol) and subnatant solid medium Benecke (0.3 M mannitol) at 20 °C under a 16-h photoperiod white light after 12 h preculture in darkness at 20 °C. The great majority of protoplasts follow a regenerative sequence: formation of asymmetric cells in 2–3 days; division of the asymmetric cells to 2–3 cells in 4–5 days, and further develop to produce a new chloronemal filament in 15 days. Juvenile gametophyte can be visible in 20 days. The plating ratio of cell cluster regenerated from protoplasts reaches up to 45%. Transient expression experiments indicate the electroporation uptake of DNA is possible.     

Cloning and DNA sequence analysis of the mercury resistance genes of Streptomyces lividans

Summary A broad-spectrum mercury resistance locus (mer) from a spontaneous chloramphenicol-sensitive (Cm^s), arginine auxotrophic (Arg^–) mutant of Streptomyces lividan 1326 was isolated on a 6 kb DNA fragment by shotgun cloning into the mercury-sensitive derivative S. lividans TK64 using the vector pIJ702. The mer genes form part of a very large amplifiable DNA sequence present in S. lividans 1326. This element was amplified to about 20 copies per chromosome in the Cm^s Arg^– mutant and was missing from strains like S. lividans TK64, cured for the plasmid SLP3. DNA sequence analysis of a 5 kb region encompassing the whole region required for broad-spectrum mercury resistance revealed six open reading frames (ORFs) transcribed in opposite directions from a common intercistronic region. The protein sequences predicted from the two ORFs transcribed in one direction showed a high degree of similarity to mercuric reductase and organomercurial lyase from other gram-negative and gram-positive sources. Few, if any, similarities were found between the predicted polypeptide sequences of the other four ORFs and other known proteins.     

Transformable mutants of a biopesticide strainStreptomyces griseoviridis K61

Summary The aim of this work was to isolate transformable mutants ofStreptomyces griseoviridis K61 without affecting the secondary metabolism of this strain.S. griseoviridis K61 produces an antifungal aromatic heptaene polyene antibiotic, and is used as a biological control agent. In protoplast transformation experiments using plasmid pIJ702 DNA, the few spontaneous transformants were phenotypically bald and their secondary metabolism was pleiotropically affected. By mutagenizing K61 withN-methyl-N-nitro-N-nitrosoguanidine (MNNG) a highly transformable variant K61-42 was obtained. Protoplasts ofS. griseoviridis K61-42 could be transformed by several model plasmids producing 10⁴–10⁵ transformants/g plasmid DNA. The polyene synthesis of K61-42 was normal, making this strain a useful tool in genetic studies on the mechanism of biopesticide action.